- 03 Apr, 2019 3 commits
-
-
Noralf Trønnes authored
drm_dev_register() initializes internal clients like bootsplash as the last thing it does, so all setup needs to be done at this point. Fix by calling vc4_kms_load() before registering. Also check the error code returned from that function. Cc: Eric Anholt <eric@anholt.net> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190326175546.18126-17-noralf@tronnes.org
-
Noralf Trønnes authored
For each enabled crtc the functions sets dpms on all registered connectors. Limit this to only doing it once and on the connectors actually in use. Signed-off-by:
-
Noralf Trønnes authored
The gamma_size variable has not been used since commit 4abe3520 ("drm/kms/fb: use slow work mechanism for normal hotplug also.") While in the area move a comment back to its code block. They got separated by commit d50ba256 ("drm/kms: start adding command line interface using fb."). Signed-off-by:
-
- 02 Apr, 2019 5 commits
-
-
Gerd Hoffmann authored
Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
-
Gerd Hoffmann authored
Signed-off-by:
-
Gerd Hoffmann authored
Signed-off-by:
-
Gerd Hoffmann authored
Signed-off-by:
-
Gerd Hoffmann authored
Signed-off-by:
-
- 01 Apr, 2019 24 commits
-
-
Kangjie Lu authored
pm_runtime_get_sync could fail and thus deserves a check. The patch adds such a check and return its error code upstream if it indeed failed. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
Mukesh Ojha <mojha@codeaurora.org>
-
Qiang Yu authored
Signed-off-by:
Qiang Yu <yuq825@gmail.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
-
Qiang Yu authored
- Mali 4xx GPUs have two kinds of processors GP and PP. GP is for OpenGL vertex shader processing and PP is for fragment shader processing. Each processor has its own MMU so prcessors work in virtual address space. - There's only one GP but multiple PP (max 4 for mali 400 and 8 for mali 450) in the same mali 4xx GPU. All PPs are grouped togather to handle a single fragment shader task divided by FB output tiled pixels. Mali 400 user space driver is responsible for assign target tiled pixels to each PP, but mali 450 has a HW module called DLBU to dynamically balance each PP's load. - User space driver allocate buffer object and map into GPU virtual address space, upload command stream and draw data with CPU mmap of the buffer object, then submit task to GP/PP with a register frame indicating where is the command stream and misc settings. - There's no command stream validation/relocation due to each user process has its own GPU virtual address space. GP/PP's MMU switch virtual address space before running two tasks from different user process. Error or evil user space code just get MMU fault or GP/PP error IRQ, then the HW/SW will be recovered. - Use GEM+shmem for MM. Currently just alloc and pin memory when gem object creation. GPU vm map of the buffer is also done in the alloc stage in kernel space. We may delay the memory allocation and real GPU vm map to command submission stage in the furture as improvement. - Use drm_sched for GPU task schedule. Each OpenGL context should have a lima context object in the kernel to distinguish tasks from different user. drm_sched gets task from each lima context in a fair way. mesa driver can be found here before upstreamed: https://gitlab.freedesktop.org/lima/mesa v8: - add comments for in_sync - fix ctx free miss mutex unlock v7: - remove lima_fence_ops with default value - move fence slab create to device probe - check pad ioctl args to be zero - add comments for user/kernel interface v6: - fix comments by checkpatch.pl v5: - export gp/pp version to userspace - rebase on drm-misc-next v4: - use get param interface to get info - separate context create/free ioctl - remove unused max sched task param - update copyright time - use xarray instead of idr - stop using drmP.h v3: - fix comments from kbuild robot - restrict supported arch to tested ones v2: - fix syscall argument check - fix job finish fence leak since kernel 5.0 - use drm syncobj to replace native fence - move buffer object GPU va map into kernel - reserve syscall argument space for future info - remove kernel gem modifier - switch TTM back to GEM+shmem MM - use time based io poll - use whole register name - adopt gem reservation obj integration - use drm_timeout_abs_to_jiffies Cc: Eric Anholt <eric@anholt.net> Cc: Rob Herring <robh@kernel.org> Cc: Christian König <ckoenig.leichtzumerken@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by:
Andreas Baierl <ichgeh@imkreisrum.de> Signed-off-by:
Erico Nunes <nunes.erico@gmail.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
Marek Vasut <marex@denx.de> Signed-off-by:
Simon Shields <simon@lineageos.org> Signed-off-by:
Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by:
Rob Herring <robh@kerrnel.org> Signed-off-by:
-
Eric Anholt authored
Otherwise, you sometimes decode the ident fields based on 0xdeadbeef register reads. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com>
-
Eric Anholt authored
This makes sure the vc4_reset doesn't hit an obscure race with the GET_PARAM ioctl, fixes a decrement outside of the lock, and prevents future code from making mistakes with the weird return value of pm_runtime_get_sync(). Signed-off-by:
-
Eric Anholt authored
Now I can extend the stats without more copy and pasting between the two. Signed-off-by:
-
Dan Carpenter authored
The shmem->pages[] array has "num_pages" elements so the > should be >= to prevent reading beyond the end of the array. The shmem->pages[] array is allocated in drm_gem_shmem_prime_import_sg_table(). Fixes: 2194a63a ("drm: Add library for shmem backed GEM objects") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Eric Anholt authored
This removes a bunch of duplicated boilerplate for the debugfs vs runtime printk debug dumping. Signed-off-by:
-
Eric Anholt authored
The debugfs_regset32 is nice to use for reducing boilerplate in dumping a bunch of regs in debugfs, but we also want to be able to print to dmesg them at runtime for driver debugging. drm_printer lets us format debugfs and the printk the same way. v2: Add some kerneldoc for the function (requested by danvet) Signed-off-by:
-
Eric Anholt authored
We have another thing called the "done fence" that tracks when the scheduler considers the job done, and having the shared name was confusing. Signed-off-by:
Dave Emett <david.emett@broadcom.com>
-
Eric Anholt authored
We deref v3d->bin_job in the work handler, but v3d->bin_job doesn't actually hold a ref on the job. v2: typo fix FRDONE -> FLDONE Signed-off-by:
-
Dan Carpenter authored
The drm_gem_shmem_create() returns error pointers and v3d_bo_create() is also supposed to return error pointers. Fixes: 40609d48 ("drm/v3d: Use the new shmem helpers to reduce driver boilerplate.") Signed-off-by:
-
Eric Anholt authored
The HW only executes a load once the tile coordinates packet happens, and only tracks one at a time, so by emitting our two MSAA loads back to back we would end up with an undefined color or Z buffer. Fixes dEQP-EGL.functional.render.multi_context.gles2.rgb888_window Signed-off-by:
-
Chunming Zhou authored
v2: individually allocate chain array, since chain node is free independently. v3: all existing points must be already signaled before cpu perform signal operation, so add check condition for that. v4: remove v3 change and add checking to prevent out-of-order v5: unify binary and timeline Signed-off-by:Chunming Zhou <david1.zhou@amd.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Cc: Tobias Hector <Tobias.Hector@amd.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/295792/?series=58813&rev=1
-
Chunming Zhou authored
we need to import/export timeline point. v2: unify to one transfer ioctl Signed-off-by:
-
Christian König authored
Implement finding the right timeline point in drm_syncobj_find_fence. v2: return -EINVAL when the point is not submitted yet. v3: fix reference counting bug, add flags handling as well v4: add timeout for find fence Signed-off-by:
-
Chunming Zhou authored
user mode can query timeline payload. v2: check return value of copy_to_user v3: handle querying entry by entry v4: rebase on new chain container, simplify interface v5: query last signaled timeline point, not last point. v6: add unorder point check Signed-off-by:
-
Chunming Zhou authored
points array is one-to-one match with syncobjs array. v2: add seperate ioctl for timeline point wait, otherwise break uapi. v3: userspace can specify two kinds waits:: a. Wait for time point to be completed. b. and wait for time point to become available v4: rebase v5: add comment for xxx_WAIT_AVAILABLE v6: rebase and rework on new container v7: drop _WAIT_COMPLETED, it is the default anyway v8: correctly handle garbage collected fences Signed-off-by:
-
Christian König authored
Use the dma_fence_chain object to create a timeline of fence objects instead of just replacing the existing fence. v2: rebase and cleanup v3: fix garbage collection parameters v4: add unorder point check, print a warn calltrace Signed-off-by:
-
Christian König authored
Lockless container implementation similar to a dma_fence_array, but with only two elements per node and automatic garbage collection. v2: properly document dma_fence_chain_for_each, add dma_fence_chain_find_seqno, drop prev reference during garbage collection if it's not a chain fence. v3: use head and iterator for dma_fence_chain_for_each v4: fix reference count in dma_fence_chain_enable_signaling v5: fix iteration when walking each chain node v6: add __rcu for member 'prev' of struct chain node v7: fix rcu warnings from kernel robot Signed-off-by: -
Christian König authored
We can't just map any randome page we get when memory encryption is active. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.kernel.org/patch/10850833/
-
Mans Rullgard authored
Sometimes it is desirabled to use a separate i2c controller for ddc access. This adds support for the ddc-i2c-bus property of the hdmi-connector node, using the specified controller if provided. Signed-off-by:
Mans Rullgard <mans@mansr.com> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190328130249.19356-1-mans@mansr.com
-
Yannick Fertré authored
Implements system sleep power management ops. Signed-off-by:
Yannick Fertré <yannick.fertre@st.com> Acked-by:
Philippe Cornu <philippe.cornu@st.com> Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1553156120-13851-1-git-send-email-yannick.fertre@st.com
-
Yannick Fertré authored
Implements system sleep power management ops. Signed-off-by:
-
- 31 Mar, 2019 2 commits
-
-
Zheng Yang authored
The RK3066 HDMI TX serves as interface between a LCD Controller and a HDMI bus. A HDMI TX consists of one HDMI transmitter controller and one HDMI transmitter PHY. The interface has three (3) 8-bit data channels which can be configured for a number of bus widths (8/10/12/16/20/24-bit) and different video formats (RGB, YCbCr). Features: HDMI version 1.4a, HDCP revision 1.4 and DVI version 1.0 compliant transmitter. Supports DTV resolutions from 480i to 1080i/p HD. Master I2C interface for a DDC connection. HDMI TX supports multiple power save modes. The HDMI TX input can switch between LCDC0 and LCDC1. (Sound support is not included in this patch) Signed-off-by:
Zheng Yang <zhengyang@rock-chips.com> Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Signed-off-by:
-
Johan Jonker authored
This patch adds a binding that describes the HDMI controller for rk3066. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 30 Mar, 2019 1 commit
-
-
Urja Rannikko authored
Splits out the dither register bits and introduces the same config enumerations as in the rockchip kernel tree. Tested to fix the banding on my ASUS C201. Signed-off-by:
Urja Rannikko <urjaman@gmail.com> Signed-off-by:
-
- 28 Mar, 2019 5 commits
-
-
Gerd Hoffmann authored
This patch moves the virtio_gpu_cmd_create_resource() call (which notifies the host about the new resource created) into the virtio_gpu_object_create() function. That way we can call virtio_gpu_cmd_create_resource() before ttm_bo_init(), so the host already knows about the object when ttm initializes the object and calls our driver callbacks. Specifically the object is already created when the virtio_gpu_ttm_tt_bind() callback invokes virtio_gpu_object_attach(), so the extra virtio_gpu_object_attach() calls done after virtio_gpu_object_create() are not needed any more. The fence support for the create ioctl becomes a bit more tricky though. The code moved into virtio_gpu_object_create() too. We first submit the (fenced) virtio_gpu_cmd_create_resource() command, then initialize the ttm object, and finally attach just created object to the fence for the command in case it didn't finish yet. Signed-off-by:
-
Gerd Hoffmann authored
Add 3d resource parameters to virtio_gpu_object_params struct. With that in place we can use it for virtio_gpu_cmd_resource_create_3d() calls. Signed-off-by:
-
Gerd Hoffmann authored
Add format, width and height fields to the virtio_gpu_object_params struct. With that in place we can use the parameter struct for virtio_gpu_cmd_create_resource() calls too. Signed-off-by:
-
Gerd Hoffmann authored
Create virtio_gpu_object_params, use that to pass object parameters to virtio_gpu_object_create. This is just the first step, followup patches will add more parameters to the struct. The plan is to use the struct for all object parameters. Drop unused "kernel" parameter for virtio_gpu_alloc_object(), it is unused and always false. Also drop "pinned" parameter. virtio-gpu doesn't shuffle around objects, so effecively they all are pinned anyway. Hardcode TTM_PL_FLAG_NO_EVICT so ttm knows. Doesn't change much for the moment as virtio-gpu supports TTM_PL_FLAG_TT only so there is no opportunity to move around objects. That'll probably change in the future though. Signed-off-by:
-
Gerd Hoffmann authored
Drop the dummy ttm backend implementation, add a real one for TTM_PL_FLAG_TT objects. The bin/unbind callbacks will call virtio_gpu_object_{attach,detach}, to update the object state on the host side, instead of invoking those calls from the move_notify() callback. With that in place the move and move_notify callbacks are not needed any more, so drop them. Signed-off-by:
-
