From Jason Cooper:

Misc:
 - trim includes for board-dnskw.c

* 'kirkwood/cleanup' of git://git.infradead.org/users/jcooper/linux:
  ARM: kirkwood: Trim excess #includes in board-dnskw.c

From Jason Cooper:

New bindings:
  - iconnect nand and keys
  - mv_cesa
  - gpio-fan

* 'kirkwood/dt' of git://git.infradead.org/users/jcooper/linux:
  ARM: kirkwood: Use devicetree to define DNS-32[05] fan
  hwmon: Add devicetree bindings to gpio-fan
  Crypto: CESA: Add support for DT based instantiation.
  ARM: Kirkwood: Describe iconnect nand in DT.
  ARM: Kirkwood: Describe iconnect keys in DT.

From Jason Cooper:

defconfig:
 - update kirkwood_defconfig via 'make oldconfig'
 - Add all Kirkwood DT boards to the defconfig
 - enable SERIAL_OF_PLATFORM and ORION_WATCHDOG in kirkwood_defconfig

* 'kirkwood/defconfig' of git://git.infradead.org/users/jcooper/linux:
  ARM: Kirkwood: add DT boards to defconfig
  ARM: Kirkwood: update defconfig

* 'kirkwood/boards' of git://git.infradead.org/users/jcooper/linux:
  ARM: Dove: allow PCI to be disabled
  ARM: dove: SolidRun CuBox DT
  ARM: dove: add device tree descriptors
  ARM: dove: add device tree based machine descriptor
  ARM: dove: add crypto engine
  ARM: dove: add clock gating control
  ARM: dove: unify clock setup
  ARM: initial DTS support for km_kirkwood
  arm: add documentation describing Marvell families of SoC
  ARM: kirkwood: DT descriptor for Seagate FreeAgent Dockstar
  ARM: kirkwood: DT board setup for Seagate FreeAgent Dockstar
  ARM: Kirkwood: Iomega ix2-200 DT support

Context conflicts in arch/arm/Kconfig and arch/arm/mach-dove/common.c.

The new device trees added to arch/arm/mach-kirkwood/Makefile.boot are
kept and dealt with in a separate changeset, since moving them out to
the new Makefile in this merge commit doesn't work well.
Signed-off-by: Olof Johansson <olof@lixom.net>

By Arnd Bergmann (15) and David Brown (1)
* next/multiplatform:
  ARM: msm: Move core.h contents into common.h
  ARM: spear: move platform_data definitions
  ARM: samsung: move platform_data definitions
  ARM: orion: move platform_data definitions
  ARM: nomadik: move platform_data definitions
  ARM: w90x900: move platform_data definitions
  ARM: vt8500: move platform_data definitions
  ARM: tegra: move sdhci platform_data definition
  ARM: sa1100: move platform_data definitions
  ARM: pxa: move platform_data definitions
  ARM: netx: move platform_data definitions
  ARM: msm: move platform_data definitions
  ARM: imx: move platform_data definitions
  ARM: ep93xx: move platform_data definitions
  ARM: davinci: move platform_data definitions
  ARM: at91: move platform_data definitions

By Arnd Bergmann (21) and Wei Yongjun (1)
via Olof Johansson (2) and Haojian Zhuang (1)
* next/cleanup: (22 commits)
  ARM: mmp: using for_each_set_bit to simplify the code
  net: seeq: use __iomem pointers for MMIO
  video: da8xx-fb: use __iomem pointers for MMIO
  scsi: eesox: use __iomem pointers for MMIO
  serial: ks8695: use __iomem pointers for MMIO
  input: rpcmouse: use __iomem pointers for MMIO
  ARM: samsung: use __iomem pointers for MMIO
  ARM: spear13xx: use __iomem pointers for MMIO
  ARM: sa1100: use __iomem pointers for MMIO
  ARM: prima2: use __iomem pointers for MMIO
  ARM: nomadik: use __iomem pointers for MMIO
  ARM: msm: use __iomem pointers for MMIO
  ARM: lpc32xx: use __iomem pointers for MMIO
  ARM: ks8695: use __iomem pointers for MMIO
  ARM: ixp4xx: use __iomem pointers for MMIO
  ARM: iop32x: use __iomem pointers for MMIO
  ARM: iop13xx: use __iomem pointers for MMIO
  ARM: integrator: use __iomem pointers for MMIO
  ARM: imx: use __iomem pointers for MMIO
  ARM: ebsa110: use __iomem pointers for MMIO
  ...

__iomem annotation cleanup branch from Arnd.

* cleanup/__iomem: (21 commits)
  net: seeq: use __iomem pointers for MMIO
  video: da8xx-fb: use __iomem pointers for MMIO
  scsi: eesox: use __iomem pointers for MMIO
  serial: ks8695: use __iomem pointers for MMIO
  input: rpcmouse: use __iomem pointers for MMIO
  ARM: samsung: use __iomem pointers for MMIO
  ARM: spear13xx: use __iomem pointers for MMIO
  ARM: sa1100: use __iomem pointers for MMIO
  ARM: prima2: use __iomem pointers for MMIO
  ARM: nomadik: use __iomem pointers for MMIO
  ARM: msm: use __iomem pointers for MMIO
  ARM: lpc32xx: use __iomem pointers for MMIO
  ARM: ks8695: use __iomem pointers for MMIO
  ARM: ixp4xx: use __iomem pointers for MMIO
  ARM: iop32x: use __iomem pointers for MMIO
  ARM: iop13xx: use __iomem pointers for MMIO
  ARM: integrator: use __iomem pointers for MMIO
  ARM: imx: use __iomem pointers for MMIO
  ARM: ebsa110: use __iomem pointers for MMIO
  ARM: at91: use __iomem pointers for MMIO
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Lots of code has now moved into the devicetree, leaving a collection of
useless header files. Tidy them up.

This applies cleanly atop of my previous patch, "[PATCH V2 2/2] ARM:
kirkwood: Use devicetree to define DNS-32[05] fan", which also removes
gpio-fan.h
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Remove more board-specific code by using devicetree to define the fan
attached to both boards.
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Allow a gpio-fan to be defined in devicetree, see binding documentation
for details.
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Based on work by Michael Walle and Jason Cooper.

Added support for getting the interrupt number and address of SRAM
from DT.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Conflicts:

	arch/arm/mach-kirkwood/board-dt.c

Define the nand and its partitions in DT and remove them from cmdline
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Define the 2 keys found on iconnect in DT. It's also changing the keycodes/
switches to use better ones.
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

* multiplatform/platform-data:
  ARM: spear: move platform_data definitions
  ARM: samsung: move platform_data definitions
  ARM: orion: move platform_data definitions
  ARM: nomadik: move platform_data definitions
  ARM: w90x900: move platform_data definitions
  ARM: vt8500: move platform_data definitions
  ARM: tegra: move sdhci platform_data definition
  ARM: sa1100: move platform_data definitions
  ARM: pxa: move platform_data definitions
  ARM: netx: move platform_data definitions
  ARM: msm: move platform_data definitions
  ARM: imx: move platform_data definitions
  ARM: ep93xx: move platform_data definitions
  ARM: davinci: move platform_data definitions
  ARM: at91: move platform_data definitions

Conflicts due to removed files:
	arch/arm/mach-tegra/board-harmony.c
	arch/arm/mach-tegra/board-trimslice.c

Conflicts due to code removal:
	arch/arm/mach-tegra/board-paz00.c

Context conflicts in:
	drivers/mmc/host/sdhci-tegra.c
	drivers/net/irda/pxaficp_ir.c
Signed-off-by: Olof Johansson <olof@lixom.net>

No real need to have a separate core.h from the common.h file.  Fold
these two prototypes into the common header file.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

* multiplatform/smp_ops:
  ARM: consolidate pen_release instead of having per platform definitions
  ARM: smp: Make SMP operations mandatory
  ARM: SoC: convert spear13xx to SMP operations
  ARM: SoC: convert imx6q to SMP operations
  ARM: SoC: convert highbank to SMP operations
  ARM: SoC: convert shmobile SMP to SMP operations
  ARM: SoC: convert ux500 to SMP operations
  ARM: SoC: convert MSM to SMP operations
  ARM: SoC: convert Exynos4 to SMP operations
  ARM: SoC: convert Tegra to SMP operations
  ARM: SoC: convert OMAP4 to SMP operations
  ARM: SoC: convert VExpress/RealView to SMP operations
  ARM: SoC: add per-platform SMP operations

Conflicts due to file moves or removals in:
	arch/arm/mach-msm/board-msm8960.c
	arch/arm/mach-msm/board-msm8x60.c
	arch/arm/mach-tegra/board-harmony.c
	arch/arm/mach-tegra/board-trimslice.c

Conflicts due to board file cleanup:
	arch/arm/mach-tegra/board-paz00.c

Conflicts due to cpu hotplug addition:
	arch/arm/mach-tegra/hotplug.c
Signed-off-by: Olof Johansson <olof@lixom.net>

* 'board' of git://github.com/hzhuang1/linux:
  ARM: mmp: using for_each_set_bit to simplify the code

Also, enable SERIAL_OF_PLATFORM and ORION_WATCHDOG
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Allow PCI support for Dove to be disabled.  Some platforms do not have
anything connected to the PCIe ports, so requiring PCI support to be
built into the kernel just wastes space, and presents a lot more config
options than are necessary.

However, select USB_ARCH_HAS_EHCI so that we can still have EHCI
support.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

This patch adds basic support for the SolidRun CuBox to DT based
mach-dove. There are still some issues related to ongoing orion/mvebu
development, e.g. gpio-led will not work as there is no DT pinctrl
for dove yet and we don't have board specific setup code. Nevertheless,
the DT description is already introduced here.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

This patch adds device tree decriptors for dove SoC and currently
supported boards.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

This adds a generic DT_MACHINE for mach-dove. As with other orion based
SoCs there still is some glue code required to make all internal devices
work, i.e. auxdata is provided to pass clocks to corresponding device
drivers.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

This patch adds a dove specific setup function for the Marvell CESA
crypto engine available on orion based SoCs. Dove setup was just
missing a function to call orion_crypto_init with dove specific
setup.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

This patch adds clock gates from the clock gating control register
available on dove. All clock gates are hooked up to tclk, except for
gigabit ethernet controller (ge) which is a child of gephy to allow
both enabled/disabled at the same time.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

This patch synchronizes the clock setup of dove with other orion-based
platforms.

In dove_find_tclk there was a note about DOVE_SAMPLE_HI/LO register to
detect tclk. While it might be possible to set a different tclk frequency
with reset strapping the Dove datasheets don't tell anything about tclk
frequency here. Therefore, I removed that comment.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

This is a first attempt to support the km_kirkwood reference design with
a device tree. This km_kirkwood design is present in many Keymile
products. It is based on the Marvell Bobcat SOC which integrates a
Kirkwood CPU next to a big L2 Ethernet Switch. The Kirkwood in the SOC
is very similar to the "normal" one, but there are a few differences.

This initial support is minimal: the kernel can boot with network
(ge0), serial port and NAND functional.
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Cc: Holger Brunck <holger.brunck@keymile.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

As stated in the introduction of the document, the families of ARM
SoCs at Marvell are very complicated, and it is difficult for
newcomers to understand the organization of this SoC family and how it
relates to the Linux kernel support for those hardware platforms.

This document is only at RFC stage for now, it requires reviews and
comments from the Marvell maintainers, the PXA maintainers and the MMP
maintainers. For correctness of course, but also to add any other
information that would be useful. For example, one of the thing that
wasn't clear how to detail in the documentation is how the SoCs relate
to each other in terms of hardware IP blocks. For example, most of the
Kirkwood/Dove/Armada 370-XP/etc. hardware IPs (I2C, SPI, USB, SATA,
etc.) are identical, while the PXA and MMP families are completely
separate.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: Lior Amsalem <alior@marvell.com>
Cc: Maen Suleiman <maen@marvell.com>
Cc: Tawfik Bayouk <tawfik@marvell.com>
Cc: Shadi Ammouri <shadi@marvell.com>
Cc: Eran Ben-Avi <benavi@marvell.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

This adds the corresponding device tree descriptor for the
Seagate FreeAgent Dockstar based on Kirkwood DT.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

This add a DT compatible board specific setup for the Seagate
FreeAgent Dockstar.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Add support for the Iomega ix2-200.
Led's and buttons working as of kernel 3.6-rc2

the 3 lines in the network interface do seem to be required as
removing either causes the network card to not be able to reach
the network (at least on my device).

Product page:
http://go.iomega.com/en/products/network-storage-desktop/storcenter-network-storage-solution/network-hard-drive-ix2-200-cloud/?partner=4735#tech_specsItem_tabSigned-off-by: Alan M Butler <alanbutty12@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Using for_each_set_bit() to simplify the code.

spatch with a semantic match is used to found this.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>

Being a module_init call, highbank_pm_init will cause problem with
multi-platform build running on other platforms.  Call it from
.init_machine instead.
Reported-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep
the platforms that have had new targets added recently and move them over.

While I was at it, I also made the dtb generation more generic, i.e. if
the platform is enabled then all dtbs for that platform will be created.
Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Tony Lindgren <tony@atomide.com>
Cc: David Brown <davidb@codeaurora.com>
Cc: Barry Song <Baohua.Song@csr.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>

Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux into next/multiplatform

Enable initial ARM multi-platform support for highbank, mvebu,
socfpga, picoxcell, and vexpress.

Multi-platform support is dependent on mach/gpio.h removal and
restructuring of DEBUG_LL and dtb build rules included in this branch.

This has been built for all defconfigs, and booted on highbank with
all 5 platforms enabled.

By Rob Herring (18) and Arnd Bergmann (1)
via Rob Herring
* tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux:
  ARM: vexpress: convert to multi-platform
  ARM: initial multiplatform support
  ARM: mvebu: move armada-370-xp.h in mach dir
  ARM: vexpress: remove dependency on mach/* headers
  ARM: picoxcell: remove dependency on mach/* headers
  ARM: move all dtb targets out of Makefile.boot
  ARM: picoxcell: move debug macros to include/debug
  ARM: socfpga: move debug macros to include/debug
  ARM: mvebu: move debug macros to include/debug
  ARM: vexpress: move debug macros to include/debug
  ARM: highbank: move debug macros to include/debug
  ARM: move debug macros to common location
  ARM: make mach/gpio.h headers optional
  ARM: orion: move custom gpio functions to orion-gpio.h
  ARM: shmobile: move custom gpio functions to sh-gpio.h
  ARM: pxa: use gpio_to_irq for sharppm_sl
  net: pxaficp_ir: add irq resources
  usb: pxa27x_udc: remove IRQ_USB define
  staging: ste_rmi4: remove gpio.h include

Conflicts due to addition of bcm2835 and removal of pnx4008 in:
	arch/arm/Kconfig
	arch/arm/Makefile

Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in:
	arch/arm/mach-imx/Makefile.boot
	arch/arm/mach-mxs/Makefile.boot
	arch/arm/mach-tegra/Makefile.boot
Signed-off-by: Olof Johansson <olof@lixom.net>

* next/soc: (50 commits)
  ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move
  MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture
  ARM: bcm2835: instantiate console UART
  ARM: bcm2835: add stub clock driver
  ARM: bcm2835: add system timer
  ARM: bcm2835: add interrupt controller driver
  ARM: add infra-structure for BCM2835 and Raspberry Pi
  ARM: tegra20: add CPU hotplug support
  ARM: tegra30: add CPU hotplug support
  ARM: tegra: clean up the common assembly macros into sleep.h
  ARM: tegra: replace the CPU CAR access code by tegra_cpu_car_ops
  ARM: tegra: introduce tegra_cpu_car_ops structures
  ARM: Tegra: Add smp_twd clock for Tegra20
  ARM: AM33XX: clock: Add dcan clock aliases for device-tree
  ARM: OMAP2+: dpll: Add missing soc_is_am33xx() check for common functions
  ARM: OMAP: omap_device: idle devices with no driver bound
  ARM: OMAP: omap_device: don't attempt late suspend if no driver bound
  ARM: OMAP: omap_device: keep track of driver bound status
  ARM: OMAP3+: hwmod: Add AM33XX HWMOD data
  ARM: OMAP2+: hwmod: Hook-up am33xx support in omap_hwmod framework
  ...

Change/remove conflict in arch/arm/mach-ux500/clock.c resolved.
Signed-off-by: Olof Johansson <olof@lixom.net>

* next/dt: (182 commits)
  ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support
  ARM: tegra: Add Avionic Design Medcom-Wide support
  ARM: tegra: Add Avionic Design Plutux support
  ARM: tegra: Add Avionic Design Tamonten support
  ARM: tegra: dts: Add pwm label
  ARM: dt: tegra: whistler: configure power off
  ARM: mxs: m28evk: Disable OCOTP OUI loading
  ARM: imx6q: use pll2_pfd2_396m as the enfc_sel's parent
  ARM: dts: imx6q-sabrelite: add usbotg pinctrl support
  ARM: dts: imx23-olinuxino: Add USB host support
  ARM: dts: imx6q-sabrelite: add usbmisc device
  ARM: dts: mx23: Add USB resources
  ARM: dts: mxs: Add ethernetX to macX aliases
  ARM: msm: Remove non-DT targets from 8960
  ARM: msm: Add DT support for 8960
  ARM: msm: Move io mapping prototypes to common.h
  ARM: msm: Rename board-msm8x60 to signify its DT only status
  ARM: msm: Make 8660 a DT only target
  ARM: msm: Move 8660 to DT timer
  ARM: msm: Add DT support to msm_timer
  ...

* next/cleanup: (358 commits)
  ARM: tegra: harmony: fix ldo7 regulator-name
  ARM: OMAP2+: Make omap4-keypad.h local
  ARM: OMAP2+: Make l4_3xxx.h local
  ARM: OMAP2+: Make l4_2xxx.h local
  ARM: OMAP2+: Make l3_3xxx.h local
  ARM: OMAP2+: Make l3_2xxx.h local
  ARM: OMAP1: Move irda.h from plat to mach
  ARM: OMAP2+: Make hdq1w.h local
  ARM: OMAP2+: Make gpmc-smsc911x.h local
  ARM: OMAP2+: Make gpmc-smc91x.h local
  ARM: OMAP1: Move flash.h from plat to mach
  ARM: OMAP2+: Make debug-devices.h local
  ARM: OMAP1: Move board-voiceblue.h from plat to mach
  ARM: OMAP1: Move board-sx1.h from plat to mach
  ARM: OMAP2+: Make omap-wakeupgen.h local
  ARM: OMAP2+: Make omap-secure.h local
  ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local
  ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h local
  ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h local
  ARM: OMAP2+: Make ctrl_module_core_44xx.h local
  ...

Merge tag 'omap-cleanup-local-headers-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

From Tony Lindgren:
This branch contains mostly scripted changes to make omap
header files local where possible to get us closer to supporting
the ARM single zImage. After these changes mach includes are
pretty much out of the way for omap2+, but still lots of manual
work remains to sort through the remaining plat includes.

* tag 'omap-cleanup-local-headers-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (26 commits)
  ARM: OMAP2+: Make omap4-keypad.h local
  ARM: OMAP2+: Make l4_3xxx.h local
  ARM: OMAP2+: Make l4_2xxx.h local
  ARM: OMAP2+: Make l3_3xxx.h local
  ARM: OMAP2+: Make l3_2xxx.h local
  ARM: OMAP1: Move irda.h from plat to mach
  ARM: OMAP2+: Make hdq1w.h local
  ARM: OMAP2+: Make gpmc-smsc911x.h local
  ARM: OMAP2+: Make gpmc-smc91x.h local
  ARM: OMAP1: Move flash.h from plat to mach
  ARM: OMAP2+: Make debug-devices.h local
  ARM: OMAP1: Move board-voiceblue.h from plat to mach
  ARM: OMAP1: Move board-sx1.h from plat to mach
  ARM: OMAP2+: Make omap-wakeupgen.h local
  ARM: OMAP2+: Make omap-secure.h local
  ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local
  ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h local
  ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h local
  ARM: OMAP2+: Make ctrl_module_core_44xx.h local
  ARM: OMAP2+: Make board-rx51.h local
  ...

From Shawn Guo:
This is the second round of imx-dt patches for 3.7.  It's based on
and imx-dt-3.7 and imx-clk-dt-lookup which have already been pulled.

* tag 'imx-dt-3.7-2' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: imx6q: use pll2_pfd2_396m as the enfc_sel's parent
  ARM: dts: imx6q-sabrelite: add usbotg pinctrl support
  ARM: dts: imx6q-sabrelite: add usbmisc device