- 04 Jan, 2020 40 commits
-
-
Diego Elio Pettenò authored
[ Upstream commit 366ba7c7 ] Reading the TOC only works if the device can play audio, otherwise these commands fail (and possibly bring the device to an unhealthy state.) Similarly, cdrom_mmc3_profile() should only be called if the device supports generic packet commands. To: Jens Axboe <axboe@kernel.dk> Cc: linux-kernel@vger.kernel.org Cc: linux-scsi@vger.kernel.org Signed-off-by:
Diego Elio Pettenò <flameeyes@flameeyes.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Nathan Chancellor authored
[ Upstream commit 465bfd9c ] When building pseries_defconfig, building vdso32 errors out: error: unknown target ABI 'elfv1' This happens because -m32 in clang changes the target to 32-bit, which does not allow the ABI to be changed. Commit 4dc831aa ("powerpc: Fix compiling a BE kernel with a powerpc64le toolchain") added these flags to fix building big endian kernels with a little endian GCC. Clang doesn't need -mabi because the target triple controls the default value. -mlittle-endian and -mbig-endian manipulate the triple into either powerpc64-* or powerpc64le-*, which properly sets the default ABI. Adding a debug print out in the PPC64TargetInfo constructor after line 383 above shows this: $ echo | ./clang -E --target=powerpc64-linux -mbig-endian -o /dev/null - Default ABI: elfv1 $ echo | ./clang -E --target=powerpc64-linux -mlittle-endian -o /dev/null - Default ABI: elfv2 $ echo | ./clang -E --target=powerpc64le-linux -mbig-endian -o /dev/null - Default ABI: elfv1 $ echo | ./clang -E --target=powerpc64le-linux -mlittle-endian -o /dev/null - Default ABI: elfv2 Don't specify -mabi when building with clang to avoid the build error with -m32 and not change any code generation. -mcall-aixdesc is not an implemented flag in clang so it can be safely excluded as well, see commit 238abecd ("powerpc: Don't use gcc specific options on clang"). pseries_defconfig successfully builds after this patch and powernv_defconfig and ppc44x_defconfig don't regress. Reviewed-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> [mpe: Trim clang links in change log] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191119045712.39633-2-natechancellor@gmail.comSigned-off-by:
-
Masahiro Yamada authored
[ Upstream commit 21915eca ] build_initial_tok_table() overwrites unused sym_entry to shrink the table size. Before the entry is overwritten, table[i].sym must be freed since it is malloc'ed data. This fixes the 'definitely lost' report from valgrind. I ran valgrind against x86_64_defconfig of v5.4-rc8 kernel, and here is the summary: [Before the fix] LEAK SUMMARY: definitely lost: 53,184 bytes in 2,874 blocks [After the fix] LEAK SUMMARY: definitely lost: 0 bytes in 0 blocks Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 00e0590d ] The sanity check in macro update_for_len checks to see if len is less than zero, however, len is a size_t so it can never be less than zero, so this sanity check is a no-op. Fix this by making len a ssize_t so the comparison will work and add ulen that is a size_t copy of len so that the min() macro won't throw warnings about comparing different types. Addresses-Coverity: ("Macro compares unsigned to 0") Fixes: f1bd9041 ("apparmor: add the base fns() for domain labels") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
John Johansen <john.johansen@canonical.com> Signed-off-by:
-
Vladimir Oltean authored
[ Upstream commit 4e50573f ] The per-SoC devtype structures can contain their own callbacks that overwrite mpc8xxx_gpio_devtype_default. The clear intention is that mpc8xxx_irq_set_type is used in case the SoC does not specify a more specific callback. But what happens is that if the SoC doesn't specify one, its .irq_set_type is de-facto NULL, and this overwrites mpc8xxx_irq_set_type to a no-op. This means that the following SoCs are affected: - fsl,mpc8572-gpio - fsl,ls1028a-gpio - fsl,ls1088a-gpio On these boards, the irq_set_type does exactly nothing, and the GPIO controller keeps its GPICR register in the hardware-default state. On the LS1028A, that is ACTIVE_BOTH, which means 2 interrupts are raised even if the IRQ client requests LEVEL_HIGH. Another implication is that the IRQs are not checked (e.g. level-triggered interrupts are not rejected, although they are not supported). Fixes: 82e39b0d ("gpio: mpc8xxx: handle differences between incarnations at a single place") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20191115125551.31061-1-olteanv@gmail.comTested-by:
Michael Walle <michael@walle.cc> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit e9d3009c ] The iSCSI target driver is the only target driver that does not wait for ongoing commands to finish before freeing a session. Make the iSCSI target driver wait for ongoing commands to finish before freeing a session. This patch fixes the following KASAN complaint: BUG: KASAN: use-after-free in __lock_acquire+0xb1a/0x2710 Read of size 8 at addr ffff8881154eca70 by task kworker/0:2/247 CPU: 0 PID: 247 Comm: kworker/0:2 Not tainted 5.4.0-rc1-dbg+ #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Workqueue: target_completion target_complete_ok_work [target_core_mod] Call Trace: dump_stack+0x8a/0xd6 print_address_description.constprop.0+0x40/0x60 __kasan_report.cold+0x1b/0x33 kasan_report+0x16/0x20 __asan_load8+0x58/0x90 __lock_acquire+0xb1a/0x2710 lock_acquire+0xd3/0x200 _raw_spin_lock_irqsave+0x43/0x60 target_release_cmd_kref+0x162/0x7f0 [target_core_mod] target_put_sess_cmd+0x2e/0x40 [target_core_mod] lio_check_stop_free+0x12/0x20 [iscsi_target_mod] transport_cmd_check_stop_to_fabric+0xd8/0xe0 [target_core_mod] target_complete_ok_work+0x1b0/0x790 [target_core_mod] process_one_work+0x549/0xa40 worker_thread+0x7a/0x5d0 kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 Allocated by task 889: save_stack+0x23/0x90 __kasan_kmalloc.constprop.0+0xcf/0xe0 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0xf6/0x360 transport_alloc_session+0x29/0x80 [target_core_mod] iscsi_target_login_thread+0xcd6/0x18f0 [iscsi_target_mod] kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 Freed by task 1025: save_stack+0x23/0x90 __kasan_slab_free+0x13a/0x190 kasan_slab_free+0x12/0x20 kmem_cache_free+0x146/0x400 transport_free_session+0x179/0x2f0 [target_core_mod] transport_deregister_session+0x130/0x180 [target_core_mod] iscsit_close_session+0x12c/0x350 [iscsi_target_mod] iscsit_logout_post_handler+0x136/0x380 [iscsi_target_mod] iscsit_response_queue+0x8de/0xbe0 [iscsi_target_mod] iscsi_target_tx_thread+0x27f/0x370 [iscsi_target_mod] kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 The buggy address belongs to the object at ffff8881154ec9c0 which belongs to the cache se_sess_cache of size 352 The buggy address is located 176 bytes inside of 352-byte region [ffff8881154ec9c0, ffff8881154ecb20) The buggy address belongs to the page: page:ffffea0004553b00 refcount:1 mapcount:0 mapping:ffff888101755400 index:0x0 compound_mapcount: 0 flags: 0x2fff000000010200(slab|head) raw: 2fff000000010200 dead000000000100 dead000000000122 ffff888101755400 raw: 0000000000000000 0000000080130013 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881154ec900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881154ec980: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb >ffff8881154eca00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881154eca80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881154ecb00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc Cc: Mike Christie <mchristi@redhat.com> Link: https://lore.kernel.org/r/20191113220508.198257-3-bvanassche@acm.orgReviewed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Anatol Pomazau authored
[ Upstream commit 238191d6 ] If a faulty initiator fails to bind the socket to the iSCSI connection before emitting a command, for instance, a subsequent send_pdu, it will crash the kernel due to a null pointer dereference in sock_sendmsg(), as shown in the log below. This patch makes sure the bind succeeded before trying to use the socket. BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.4.0-rc2.iscsi+ #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 24.158246] Workqueue: iscsi_q_0 iscsi_xmitworker [ 24.158883] RIP: 0010:apparmor_socket_sendmsg+0x5/0x20 [...] [ 24.161739] RSP: 0018:ffffab6440043ca0 EFLAGS: 00010282 [ 24.162400] RAX: ffffffff891c1c00 RBX: ffffffff89d53968 RCX: 0000000000000001 [ 24.163253] RDX: 0000000000000030 RSI: ffffab6440043d00 RDI: 0000000000000000 [ 24.164104] RBP: 0000000000000030 R08: 0000000000000030 R09: 0000000000000030 [ 24.165166] R10: ffffffff893e66a0 R11: 0000000000000018 R12: ffffab6440043d00 [ 24.166038] R13: 0000000000000000 R14: 0000000000000000 R15: ffff9d5575a62e90 [ 24.166919] FS: 0000000000000000(0000) GS:ffff9d557db80000(0000) knlGS:0000000000000000 [ 24.167890] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.168587] CR2: 0000000000000018 CR3: 000000007a838000 CR4: 00000000000006e0 [ 24.169451] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 24.170320] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 24.171214] Call Trace: [ 24.171537] security_socket_sendmsg+0x3a/0x50 [ 24.172079] sock_sendmsg+0x16/0x60 [ 24.172506] iscsi_sw_tcp_xmit_segment+0x77/0x120 [ 24.173076] iscsi_sw_tcp_pdu_xmit+0x58/0x170 [ 24.173604] ? iscsi_dbg_trace+0x63/0x80 [ 24.174087] iscsi_tcp_task_xmit+0x101/0x280 [ 24.174666] iscsi_xmit_task+0x83/0x110 [ 24.175206] iscsi_xmitworker+0x57/0x380 [ 24.175757] ? __schedule+0x2a2/0x700 [ 24.176273] process_one_work+0x1b5/0x360 [ 24.176837] worker_thread+0x50/0x3c0 [ 24.177353] kthread+0xf9/0x130 [ 24.177799] ? process_one_work+0x360/0x360 [ 24.178401] ? kthread_park+0x90/0x90 [ 24.178915] ret_from_fork+0x35/0x40 [ 24.179421] Modules linked in: [ 24.179856] CR2: 0000000000000018 [ 24.180327] ---[ end trace b4b7674b6df5f480 ]--- Signed-off-by:
Anatol Pomazau <anatol@google.com> Co-developed-by:
Frank Mayhar <fmayhar@google.com> Signed-off-by:
Bharath Ravi <rbharath@google.com> Signed-off-by:
Khazhimsel Kumykov <khazhy@google.com> Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
-
Finn Thain authored
[ Upstream commit 0b7a2235 ] Add a module parameter to inhibit disconnect/reselect for individual targets. This gains compatibility with Aztec PowerMonster SCSI/SATA adapters with buggy firmware. (No fix is available from the vendor.) Apparently these adapters pass-through the product/vendor of the attached SATA device. Since they can't be identified from the response to an INQUIRY command, a device blacklist flag won't work. Cc: Michael Schmitz <schmitzmic@gmail.com> Link: https://lore.kernel.org/r/993b17545990f31f9fa5a98202b51102a68e7594.1573875417.git.fthain@telegraphics.com.auReviewed-and-tested-by:
Michael Schmitz <schmitzmic@gmail.com> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Maurizio Lombardi authored
[ Upstream commit aa5334c4 ] Passing the parameter "num_tgts=-1" will start an infinite loop that exhausts the system memory Link: https://lore.kernel.org/r/20191115163727.24626-1-mlombard@redhat.comSigned-off-by:
Maurizio Lombardi <mlombard@redhat.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Subhash Jadavani authored
[ Upstream commit 6d303e4b ] During clock gating (ufshcd_gate_work()), we first put the link hibern8 by calling ufshcd_uic_hibern8_enter() and if ufshcd_uic_hibern8_enter() returns success (0) then we gate all the clocks. Now let’s zoom in to what ufshcd_uic_hibern8_enter() does internally: It calls __ufshcd_uic_hibern8_enter() and if failure is encountered, link recovery shall put the link back to the highest HS gear and returns success (0) to ufshcd_uic_hibern8_enter() which is the issue as link is still in active state due to recovery! Now ufshcd_uic_hibern8_enter() returns success to ufshcd_gate_work() and hence it goes ahead with gating the UFS clock while link is still in active state hence I believe controller would raise UIC error interrupts. But when we service the interrupt, clocks might have already been disabled! This change fixes for this by returning failure from __ufshcd_uic_hibern8_enter() if recovery succeeds as link is still not in hibern8, upon receiving the error ufshcd_hibern8_enter() would initiate retry to put the link state back into hibern8. Link: https://lore.kernel.org/r/1573798172-20534-8-git-send-email-cang@codeaurora.orgReviewed-by:
Avri Altman <avri.altman@wdc.com> Reviewed-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
Can Guo <cang@codeaurora.org> Signed-off-by:
-
peter chang authored
[ Upstream commit ce21c63e ] Driver was missing complete() call in mpi_sata_completion which result in SATA abort error handling timing out. That causes the device to be left in the in_recovery state so subsequent commands sent to the device fail and the OS removes access to it. Link: https://lore.kernel.org/r/20191114100910.6153-2-deepak.ukey@microchip.comAcked-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
peter chang <dpf@google.com> Signed-off-by:
Deepak Ukey <deepak.ukey@microchip.com> Signed-off-by:
Viswas G <Viswas.G@microchip.com> Signed-off-by:
-
Kevin Hao authored
[ Upstream commit 72139dfa ] The struct cdev is embedded in the struct watchdog_core_data. In the current code, we manage the watchdog_core_data with a kref, but the cdev is manged by a kobject. There is no any relationship between this kref and kobject. So it is possible that the watchdog_core_data is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0 Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 00400009 (nzcv daif +PAN -UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff80001cbcfc70 x29: ffff80001cbcfc70 x28: ffff800010ea2128 x27: ffff800010bad000 x26: 0000000000000000 x25: ffff80001103c640 x24: ffff80001107b268 x23: ffff800010bad9e8 x22: ffff800010ea2128 x21: ffff000bc2c62af8 x20: ffff80001103c600 x19: ffff800010e867d8 x18: 0000000000000060 x17: 0000000000000000 x16: 0000000000000000 x15: ffff000bd7240470 x14: 6e6968207473696c x13: 5f72656d6974203a x12: 6570797420746365 x11: 6a626f2029302065 x10: 7461747320657669 x9 : 7463612820657669 x8 : 3378302f3078302b x7 : 0000000000001d7a x6 : ffff800010fd5889 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff000bff948548 x1 : 276a1c9e1edc2300 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 debug_check_no_obj_freed+0x1e8/0x210 kfree+0x1b8/0x368 watchdog_cdev_unregister+0x88/0xc8 watchdog_dev_unregister+0x38/0x48 watchdog_unregister_device+0xa8/0x100 softdog_exit+0x18/0xfec4 [softdog] __arm64_sys_delete_module+0x174/0x200 el0_svc_handler+0xd0/0x1c8 el0_svc+0x8/0xc This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the watchdog_core_data, and use the API provided by the commit 233ed09d to make sure that the release of watchdog_core_data and cdev are in sequence. Signed-off-by:
Kevin Hao <haokexin@gmail.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.comSigned-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by:
-
Andrew Duggan authored
[ Upstream commit 8725aa4f ] In the event that the RMI device is unreachable, the calls to rmi_set_mode() or rmi_set_page() will fail before registering the RMI transport device. When the device is removed, rmi_remove() will call rmi_unregister_transport_device() which will attempt to access the rmi_dev pointer which was not set. This patch adds a check of the RMI_STARTED bit before calling rmi_unregister_transport_device(). The RMI_STARTED bit is only set after rmi_register_transport_device() completes successfully. The kernel oops was reported in this message: https://www.spinics.net/lists/linux-input/msg58433.html [jkosina@suse.cz: reworded changelog as agreed with Andrew] Signed-off-by:
Andrew Duggan <aduggan@synaptics.com> Reported-by:
Federico Cerutti <federico@ceres-c.it> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Blaž Hrastnik authored
[ Upstream commit 2dbc6f11 ] Per Microsoft spec, usage 0xC5 (page 0xFF) returns a blob containing data used to verify the touchpad as a Windows Precision Touchpad. 0x85, REPORTID_PTPHQA, // REPORT_ID (PTPHQA) 0x09, 0xC5, // USAGE (Vendor Usage 0xC5) 0x15, 0x00, // LOGICAL_MINIMUM (0) 0x26, 0xff, 0x00, // LOGICAL_MAXIMUM (0xff) 0x75, 0x08, // REPORT_SIZE (8) 0x96, 0x00, 0x01, // REPORT_COUNT (0x100 (256)) 0xb1, 0x02, // FEATURE (Data,Var,Abs) However, some devices, namely Microsoft's Surface line of products instead implement a "segmented device certification report" (usage 0xC6) which returns the same report, but in smaller chunks. 0x06, 0x00, 0xff, // USAGE_PAGE (Vendor Defined) 0x85, REPORTID_PTPHQA, // REPORT_ID (PTPHQA) 0x09, 0xC6, // USAGE (Vendor usage for segment #) 0x25, 0x08, // LOGICAL_MAXIMUM (8) 0x75, 0x08, // REPORT_SIZE (8) 0x95, 0x01, // REPORT_COUNT (1) 0xb1, 0x02, // FEATURE (Data,Var,Abs) 0x09, 0xC7, // USAGE (Vendor Usage) 0x26, 0xff, 0x00, // LOGICAL_MAXIMUM (0xff) 0x95, 0x20, // REPORT_COUNT (32) 0xb1, 0x02, // FEATURE (Data,Var,Abs) By expanding Win8 touchpad detection to also look for the segmented report, all Surface touchpads are now properly recognized by hid-multitouch. Signed-off-by:
Blaž Hrastnik <blaz@mxxn.io> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Qian Cai authored
[ Upstream commit 4e24e37d ] drivers/nvdimm/btt.c: In function 'btt_read_pg': drivers/nvdimm/btt.c:1264:8: warning: variable 'rc' set but not used [-Wunused-but-set-variable] int rc; ^~ Add a ratelimited message in case a storm of errors is encountered. Fixes: d9b83c75 ("libnvdimm, btt: rework error clearing") Signed-off-by:
Qian Cai <cai@lca.pw> Reviewed-by:
Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/1572530719-32161-1-git-send-email-cai@lca.pwSigned-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Doug Berger authored
[ Upstream commit 4ae5061a ] When the default processor handling was added to the function cpu_v7_spectre_init() it only excluded other ARM implemented processor cores. The Broadcom Brahma B53 core is not implemented by ARM so it ended up falling through into the set of processors that attempt to use the ARM_SMCCC_ARCH_WORKAROUND_1 service to harden the branch predictor. Since this workaround is not necessary for the Brahma-B53 this commit explicitly checks for it and prevents it from applying a branch predictor hardening workaround. Fixes: 10115105 ("ARM: spectre-v2: add firmware based hardening") Signed-off-by:
Doug Berger <opendmb@gmail.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 61005d65 ] My Logitech M185 (PID:4038) 2.4 GHz wireless HID++ mouse is causing intermittent errors like these in the log: [11091.034857] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09 [12388.031260] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09 [16613.718543] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09 [23529.938728] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09 We are already silencing error-code 0x09 (HIDPP_ERROR_RESOURCE_ERROR) errors in other places, lets do the same in hidpp20_batterylevel_get_battery_capacity to remove these harmless, but scary looking errors from the dmesg output. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Jinke Fan authored
[ Upstream commit f1a0094c ] The PixArt OEM mouse disconnets/reconnects every minute on Linux. All contents of dmesg are repetitive: [ 1465.810014] usb 1-2.2: USB disconnect, device number 20 [ 1467.431509] usb 1-2.2: new low-speed USB device number 21 using xhci_hcd [ 1467.654982] usb 1-2.2: New USB device found, idVendor=03f0,idProduct=1f4a, bcdDevice= 1.00 [ 1467.654985] usb 1-2.2: New USB device strings: Mfr=1, Product=2,SerialNumber=0 [ 1467.654987] usb 1-2.2: Product: HP USB Optical Mouse [ 1467.654988] usb 1-2.2: Manufacturer: PixArt [ 1467.699722] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:07.1/0000:05:00.3/usb1/1-2/1-2.2/1-2.2:1.0/0003:03F0:1F4A.0012/input/input19 [ 1467.700124] hid-generic 0003:03F0:1F4A.0012: input,hidraw0: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:05:00.3-2.2/input0 So add HID_QUIRK_ALWAYS_POLL for this one as well. Test the patch, the mouse is no longer disconnected and there are no duplicate logs in dmesg. Reference: https://github.com/sriemer/fix-linux-mouseSigned-off-by:
Jinke Fan <fanjinke@hygon.cn> Signed-off-by:
-
Coly Li authored
[ Upstream commit 9fcc34b1 ] In bch_mca_scan(), the number of shrinking btree node is calculated by code like this, unsigned long nr = sc->nr_to_scan; nr /= c->btree_pages; nr = min_t(unsigned long, nr, mca_can_free(c)); variable sc->nr_to_scan is number of objects (here is bcache B+tree nodes' number) to shrink, and pointer variable sc is sent from memory management code as parametr of a callback. If sc->nr_to_scan is smaller than c->btree_pages, after the above calculation, variable 'nr' will be 0 and nothing will be shrunk. It is frequeently observed that only 1 or 2 is set to sc->nr_to_scan and make nr to be zero. Then bch_mca_scan() will do nothing more then acquiring and releasing mutex c->bucket_lock. This patch checkes whether nr is 0 after the above calculation, if 0 is the result then set 1 to variable 'n'. Then at least bch_mca_scan() will try to shrink a single B+tree node. Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
-
Robert Jarzmik authored
[ Upstream commit 46acbcb4 ] The pxa27x platforms have a single IP with 2 drivers, sa1100-rtc and rtc-pxa drivers. A previous patch fixed the sa1100-rtc case, but the pxa-rtc wasn't fixed. This patch completes the previous one. Fixes: 8b6d1034 ("clk: pxa: add missing pxa27x clocks for Irda and sa1100-rtc") Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Link: https://lkml.kernel.org/r/20191026194420.11918-1-robert.jarzmik@free.frSigned-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Finn Thain authored
[ Upstream commit 79172ab2 ] Since the scsi subsystem adopted the blk-mq API, a host with zero sg_tablesize crashes with a NULL pointer dereference. blk_queue_max_segments: set to minimum 1 scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 scsi target0:0:0: Beginning Domain Validation scsi target0:0:0: Domain Validation skipping write tests scsi target0:0:0: Ending Domain Validation blk_queue_max_segments: set to minimum 1 scsi 0:0:1:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 scsi target0:0:1: Beginning Domain Validation scsi target0:0:1: Domain Validation skipping write tests scsi target0:0:1: Ending Domain Validation blk_queue_max_segments: set to minimum 1 scsi 0:0:2:0: CD-ROM QEMU QEMU CD-ROM 2.5+ PQ: 0 ANSI: 5 scsi target0:0:2: Beginning Domain Validation scsi target0:0:2: Domain Validation skipping write tests scsi target0:0:2: Ending Domain Validation blk_queue_max_segments: set to minimum 1 blk_queue_max_segments: set to minimum 1 blk_queue_max_segments: set to minimum 1 blk_queue_max_segments: set to minimum 1 sr 0:0:2:0: Power-on or device reset occurred sd 0:0:0:0: Power-on or device reset occurred sd 0:0:1:0: Power-on or device reset occurred sd 0:0:0:0: [sda] 10485762 512-byte logical blocks: (5.37 GB/5.00 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Unable to handle kernel NULL pointer dereference at virtual address (ptrval) Oops: 00000000 Modules linked in: PC: [<001cd874>] blk_mq_free_request+0x66/0xe2 SR: 2004 SP: (ptrval) a2: 00874520 d0: 00000000 d1: 00000000 d2: 009ba800 d3: 00000000 d4: 00000000 d5: 08000002 a0: 0087be68 a1: 009a81e0 Process kworker/u2:2 (pid: 15, task=(ptrval)) Frame format=7 eff addr=0000007a ssw=0505 faddr=0000007a wb 1 stat/addr/data: 0000 00000000 00000000 wb 2 stat/addr/data: 0000 00000000 00000000 wb 3 stat/addr/data: 0000 0000007a 00000000 push data: 00000000 00000000 00000000 00000000 Stack from 0087bd98: 00000002 00000000 0087be72 009a7820 0087bdb4 001c4f6c 009a7820 0087bdd4 0024d200 009a7820 0024d0dc 0087be72 009baa00 0087be68 009a5000 0087be7c 00265d10 009a5000 0087be72 00000003 00000000 00000000 00000000 0087be68 00000bb8 00000005 00000000 00000000 00000000 00000000 00265c56 00000000 009ba60c 0036ddf4 00000002 ffffffff 009baa00 009ba600 009a50d6 0087be74 00227ba0 009baa08 00000001 009baa08 009ba60c 0036ddf4 00000000 00000000 Call Trace: [<001c4f6c>] blk_put_request+0xe/0x14 [<0024d200>] __scsi_execute+0x124/0x174 [<0024d0dc>] __scsi_execute+0x0/0x174 [<00265d10>] sd_revalidate_disk+0xba/0x1f02 [<00265c56>] sd_revalidate_disk+0x0/0x1f02 [<0036ddf4>] strlen+0x0/0x22 [<00227ba0>] device_add+0x3da/0x604 [<0036ddf4>] strlen+0x0/0x22 [<00267e64>] sd_probe+0x30c/0x4b4 [<0002da44>] process_one_work+0x0/0x402 [<0022b978>] really_probe+0x226/0x354 [<0022bc34>] driver_probe_device+0xa4/0xf0 [<0002da44>] process_one_work+0x0/0x402 [<0022bcd0>] __driver_attach_async_helper+0x50/0x70 [<00035dae>] async_run_entry_fn+0x36/0x130 [<0002db88>] process_one_work+0x144/0x402 [<0002e1aa>] worker_thread+0x0/0x570 [<0002e29a>] worker_thread+0xf0/0x570 [<0002e1aa>] worker_thread+0x0/0x570 [<003768d8>] schedule+0x0/0xb8 [<0003f58c>] __init_waitqueue_head+0x0/0x12 [<00033e92>] kthread+0xc2/0xf6 [<000331e8>] kthread_parkme+0x0/0x4e [<003768d8>] schedule+0x0/0xb8 [<00033dd0>] kthread+0x0/0xf6 [<00002c10>] ret_from_kernel_thread+0xc/0x14 Code: 0280 0006 0800 56c0 4400 0280 0000 00ff <52b4> 0c3a 082b 0006 0013 6706 2042 53a8 00c4 4ab9 0047 3374 6640 202d 000c 670c Disabling lock debugging due to kernel taint Avoid this by setting sg_tablesize = 1. Link: https://lore.kernel.org/r/4567bcae94523b47d6f3b77450ba305823bca479.1572656814.git.fthain@telegraphics.com.auReported-and-tested-by:
-
Gustavo L. F. Walbon authored
[ Upstream commit 4e706af3 ] The issue was showing "Mitigation" message via sysfs whatever the state of "RFI Flush", but it should show "Vulnerable" when it is disabled. If you have "L1D private" feature enabled and not "RFI Flush" you are vulnerable to meltdown attacks. "RFI Flush" is the key feature to mitigate the meltdown whatever the "L1D private" state. SEC_FTR_L1D_THREAD_PRIV is a feature for Power9 only. So the message should be as the truth table shows: CPU | L1D private | RFI Flush | sysfs ----|-------------|-----------|------------------------------------- P9 | False | False | Vulnerable P9 | False | True | Mitigation: RFI Flush P9 | True | False | Vulnerable: L1D private per thread P9 | True | True | Mitigation: RFI Flush, L1D private per thread P8 | False | False | Vulnerable P8 | False | True | Mitigation: RFI Flush Output before this fix: # cat /sys/devices/system/cpu/vulnerabilities/meltdown Mitigation: RFI Flush, L1D private per thread # echo 0 > /sys/kernel/debug/powerpc/rfi_flush # cat /sys/devices/system/cpu/vulnerabilities/meltdown Mitigation: L1D private per thread Output after fix: # cat /sys/devices/system/cpu/vulnerabilities/meltdown Mitigation: RFI Flush, L1D private per thread # echo 0 > /sys/kernel/debug/powerpc/rfi_flush # cat /sys/devices/system/cpu/vulnerabilities/meltdown Vulnerable: L1D private per thread Signed-off-by:
Gustavo L. F. Walbon <gwalbon@linux.ibm.com> Signed-off-by:
Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com> Signed-off-by:
-
Tyrel Datwyler authored
[ Upstream commit 4f9f2d3d ] The newer ibm,drc-info property is a condensed description of the old ibm,drc-* properties (ie. names, types, indexes, and power-domains). When matching a drc-index to a drc-name we need to verify that the index is within the start and last drc-index range and map it to a drc-name using the drc-name-prefix and logical index. Fix the mapping by checking that the index is within the range of the current drc-info entry, and build the name from the drc-name-prefix concatenated with the starting drc-name-suffix value and the sequential index obtained by subtracting ibm,my-drc-index from this entries drc-start-index. Signed-off-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Tyrel Datwyler authored
[ Upstream commit 07376867 ] The device tree is in big endian format and any properties directly retrieved using OF helpers that don't explicitly byte swap should be annotated. In particular there are several places where we grab the opaque property value for the old ibm,drc-* properties and the ibm,my-drc-index property. Fix this for better static checking by annotating values we know to explicitly big endian, and byte swap where appropriate. Signed-off-by:
-
Tyrel Datwyler authored
[ Upstream commit 52e2b0f1 ] In the event that the partition is migrated to a platform with older firmware that doesn't support the ibm,drc-info property the device tree is modified to remove the ibm,drc-info property and replace it with the older style ibm,drc-* properties for types, names, indexes, and power-domains. One of the requirements of the drc-info firmware feature is that the client is able to handle both the new property, and old style properties at runtime. Therefore we can't rely on the firmware feature alone to dictate which property is currently present in the device tree. Fix this short coming by checking explicitly for the ibm,drc-info property, and falling back to the older ibm,drc-* properties if it doesn't exist. Signed-off-by:
-
David Hildenbrand authored
[ Upstream commit 7d821274 ] When unloading the module, one gets ------------[ cut here ]------------ Device 'cmm0' does not have a release() function, it is broken and must be fixed. See Documentation/kobject.txt. WARNING: CPU: 0 PID: 19308 at drivers/base/core.c:1244 .device_release+0xcc/0xf0 ... We only have one static fake device. There is nothing to do when releasing the device (via cmm_exit()). Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Bean Huo authored
[ Upstream commit cfcbae38 ] In function __ufshcd_query_descriptor(), in the event of an error happening, we directly goto out_unlock and forget to invaliate hba->dev_cmd.query.descriptor pointer. This results in this pointer still valid in ufshcd_copy_query_response() for other query requests which go through ufshcd_exec_raw_upiu_cmd(). This will cause __memcpy() crash and system hangs. Log as shown below: Unable to handle kernel paging request at virtual address ffff000012233c40 Mem abort info: ESR = 0x96000047 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000047 CM = 0, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp = 0000000028cc735c [ffff000012233c40] pgd=00000000bffff003, pud=00000000bfffe003, pmd=00000000ba8b8003, pte=0000000000000000 Internal error: Oops: 96000047 [#2] PREEMPT SMP ... Call trace: __memcpy+0x74/0x180 ufshcd_issue_devman_upiu_cmd+0x250/0x3c0 ufshcd_exec_raw_upiu_cmd+0xfc/0x1a8 ufs_bsg_request+0x178/0x3b0 bsg_queue_rq+0xc0/0x118 blk_mq_dispatch_rq_list+0xb0/0x538 blk_mq_sched_dispatch_requests+0x18c/0x1d8 __blk_mq_run_hw_queue+0xb4/0x118 blk_mq_run_work_fn+0x28/0x38 process_one_work+0x1ec/0x470 worker_thread+0x48/0x458 kthread+0x130/0x138 ret_from_fork+0x10/0x1c Code: 540000ab a8c12027 a88120c7 a8c12027 (a88120c7) ---[ end trace 793e1eb5dff69f2d ]--- note: kworker/0:2H[2054] exited with preempt_count 1 This patch is to move "descriptor = NULL" down to below the label "out_unlock". Fixes: d44a5f98(ufs: query descriptor API) Link: https://lore.kernel.org/r/20191112223436.27449-3-huobean@gmail.comReviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by:
-
Tyrel Datwyler authored
[ Upstream commit 9723c25f ] The first entry of the ibm,drc-info property is an int encoded count of the number of drc-info entries that follow. The "value" pointer returned by of_prop_next_u32() is still pointing at the this value when we call of_read_drc_info_cell(), but the helper function expects that value to be pointing at the first element of an entry. Fix up by incrementing the "value" pointer to point at the first element of the first drc-info entry prior. Signed-off-by:
-
James Smart authored
[ Upstream commit 6c6d59e0 ] Coverity reported the following: *** CID 101747: Null pointer dereferences (FORWARD_NULL) /drivers/scsi/lpfc/lpfc_els.c: 4439 in lpfc_cmpl_els_rsp() 4433 kfree(mp); 4434 } 4435 mempool_free(mbox, phba->mbox_mem_pool); 4436 } 4437 out: 4438 if (ndlp && NLP_CHK_NODE_ACT(ndlp)) { vvv CID 101747: Null pointer dereferences (FORWARD_NULL) vvv Dereferencing null pointer "shost". 4439 spin_lock_irq(shost->host_lock); 4440 ndlp->nlp_flag &= ~(NLP_ACC_REGLOGIN | NLP_RM_DFLT_RPI); 4441 spin_unlock_irq(shost->host_lock); 4442 4443 /* If the node is not being used by another discovery thread, 4444 * and we are sending a reject, we are done with it. Fix by adding a check for non-null shost in line 4438. The scenario when shost is set to null is when ndlp is null. As such, the ndlp check present was sufficient. But better safe than sorry so add the shost check. Reported-by:
coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 101747 ("Null pointer dereferences") Fixes: 2e0fef85 ("[SCSI] lpfc: NPIV: split ports") CC: James Bottomley <James.Bottomley@SteelEye.com> CC: "Gustavo A. R. Silva" <gustavo@embeddedor.com> CC: linux-next@vger.kernel.org Link: https://lore.kernel.org/r/20191111230401.12958-3-jsmart2021@gmail.comReviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 6fcbcec9 ] Quota statistics counted as 64-bit per-cpu counter. Reading sums per-cpu fractions as signed 64-bit int, filters negative values and then reports lower half as signed 32-bit int. Result may looks like: fs.quota.allocated_dquots = 22327 fs.quota.cache_hits = -489852115 fs.quota.drops = -487288718 fs.quota.free_dquots = 22083 fs.quota.lookups = -486883485 fs.quota.reads = 22327 fs.quota.syncs = 335064 fs.quota.writes = 3088689 Values bigger than 2^31-1 reported as negative. All counters except "allocated_dquots" and "free_dquots" are monotonic, thus they should be reported as is without filtering negative values. Kernel doesn't have generic helper for 64-bit sysctl yet, let's use at least unsigned long. Link: https://lore.kernel.org/r/157337934693.2078.9842146413181153727.stgit@buzzSigned-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Paul Cercueil authored
[ Upstream commit 52ecc876 ] If we cannot create the IRQ domain, the driver should fail to probe instead of succeeding with just a warning message. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1570015525-27018-3-git-send-email-zhouyanjie@zoho.comSigned-off-by:
-
Florian Fainelli authored
[ Upstream commit 27eebb60 ] If the 'brcm,irq-can-wake' property is specified, make sure we also enable the corresponding parent interrupt we are attached to. Signed-off-by:
-
Michael Hennerich authored
[ Upstream commit fc59462c ] For an external clock source, which is gated via a GPIO, the rate change should typically be propagated to the parent clock. The situation where we are requiring this propagation, is when an external clock is connected to override an internal clock (which typically has a fixed rate). The external clock can have a different rate than the internal one, and may also be variable, thus requiring the rate propagation. This rate change wasn't propagated until now, and it's unclear about cases where this shouldn't be propagated. Thus, it's unclear whether this is fixing a bug, or extending the current driver behavior. Also, it's unsure about whether this may break any existing setups; in the case that it does, a device-tree property may be added to disable this flag. Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lkml.kernel.org/r/20191108071718.17985-1-alexandru.ardelean@analog.comSigned-off-by:
-
Jeffrey Hugo authored
[ Upstream commit efd164b5 ] Some RCGs (the gfx_3d_src_clk in msm8998 for example) are basically just some constant ratio from the input across the entire frequency range. It would be great if we could specify the frequency table as a single entry constant ratio instead of a long list, ie: { .src = P_GPUPLL0_OUT_EVEN, .pre_div = 3 }, { } So, lets support that. We need to fix a corner case in qcom_find_freq() where if the freq table is non-null, but has no frequencies, we end up returning an "entry" before the table array, which is bad. Then, we need ignore the freq from the table, and instead base everything on the requested freq. Suggested-by:
Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lkml.kernel.org/r/20191031185715.15504-1-jeffrey.l.hugo@gmail.comSigned-off-by:
-
Chao Yu authored
[ Upstream commit 2a60637f ] As Eric reported: RENAME_EXCHANGE support was just added to fsstress in xfstests: commit 65dfd40a97b6bbbd2a22538977bab355c5bc0f06 Author: kaixuxia <xiakaixu1987@gmail.com> Date: Thu Oct 31 14:41:48 2019 +0800 fsstress: add EXCHANGE renameat2 support This is causing xfstest generic/579 to fail due to fsck.f2fs reporting errors. I'm not sure what the problem is, but it still happens even with all the fs-verity stuff in the test commented out, so that the test just runs fsstress. generic/579 23s ... [10:02:25] [ 7.745370] run fstests generic/579 at 2019-11-04 10:02:25 _check_generic_filesystem: filesystem on /dev/vdc is inconsistent (see /results/f2fs/results-default/generic/579.full for details) [10:02:47] Ran: generic/579 Failures: generic/579 Failed 1 of 1 tests Xunit report: /results/f2fs/results-default/result.xml Here's the contents of 579.full: _check_generic_filesystem: filesystem on /dev/vdc is inconsistent *** fsck.f2fs output *** [ASSERT] (__chk_dots_dentries:1378) --> Bad inode number[0x24] for '..', parent parent ino is [0xd10] The root cause is that we forgot to update directory's i_pino during cross_rename, fix it. Fixes: 32f9bc25 ("f2fs: support ->rename2()") Signed-off-by:
Chao Yu <yuchao0@huawei.com> Tested-by:
Eric Biggers <ebiggers@kernel.org> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
James Smart authored
[ Upstream commit 7cfd5639 ] If the driver receives a login that is later then LOGO'd by the remote port (aka ndlp), the driver, upon the completion of the LOGO ACC transmission, will logout the node and unregister the rpi that is being used for the node. As part of the unreg, the node's rpi value is replaced by the LPFC_RPI_ALLOC_ERROR value. If the port is subsequently offlined, the offline walks the nodes and ensures they are logged out, which possibly entails unreg'ing their rpi values. This path does not validate the node's rpi value, thus doesn't detect that it has been unreg'd already. The replaced rpi value is then used when accessing the rpi bitmask array which tracks active rpi values. As the LPFC_RPI_ALLOC_ERROR value is not a valid index for the bitmask, it may fault the system. Revise the rpi release code to detect when the rpi value is the replaced RPI_ALLOC_ERROR value and ignore further release steps. Link: https://lore.kernel.org/r/20191105005708.7399-2-jsmart2021@gmail.comSigned-off-by:
-
Bart Van Assche authored
[ Upstream commit f6b8540f ] According to SBC-2 a TRANSFER LENGTH field of zero means that 256 logical blocks must be transferred. Make the SCSI tracing code follow SBC-2. Fixes: bf816235 ("[SCSI] add scsi trace core functions and put trace points") Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Link: https://lore.kernel.org/r/20191105215553.185018-1-bvanassche@acm.orgSigned-off-by:
-
Jan Kara authored
[ Upstream commit 015c6033 ] jbd2 statistics counting number of blocks logged in a transaction was wrong. It didn't count the commit block and more importantly it didn't count revoke descriptor blocks. Make sure these get properly counted. Reviewed-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Matthew Bobrowski authored
[ Upstream commit 2e9b51d7 ] This patch addresses what Dave Chinner had discovered and fixed within commit: 7684e2c4. This changes does not have any user visible impact for ext4 as none of the current users of ext4_iomap_begin() that extend files depend on IOMAP_F_DIRTY. When doing a direct IO that spans the current EOF, and there are written blocks beyond EOF that extend beyond the current write, the only metadata update that needs to be done is a file size extension. However, we don't mark such iomaps as IOMAP_F_DIRTY to indicate that there is IO completion metadata updates required, and hence we may fail to correctly sync file size extensions made in IO completion when O_DSYNC writes are being used and the hardware supports FUA. Hence when setting IOMAP_F_DIRTY, we need to also take into account whether the iomap spans the current EOF. If it does, then we need to mark it dirty so that IO completion will call generic_write_sync() to flush the inode size update to stable storage correctly. Signed-off-by:
Matthew Bobrowski <mbobrowski@mbobrowski.org> Reviewed-by:
Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/8b43ee9ee94bee5328da56ba0909b7d2229ef150.1572949325.git.mbobrowski@mbobrowski.orgSigned-off-by:
-
Matthew Bobrowski authored
[ Upstream commit 548feebe ] This patch updates the lock pattern in ext4_direct_IO_read() to not block on inode lock in cases of IOCB_NOWAIT direct I/O reads. The locking condition implemented here is similar to that of 942491c9 ("xfs: fix AIM7 regression"). Fixes: 16c54688 ("ext4: Allow parallel DIO reads") Signed-off-by:
-
