During TCP sockmap redirect pressure test, the following warning is triggered:

WARNING: CPU: 3 PID: 2145 at net/core/stream.c:205 sk_stream_kill_queues+0xbc/0xd0
CPU: 3 PID: 2145 Comm: iperf Kdump: loaded Tainted: G        W         5.10.0+ #9
Call Trace:
 inet_csk_destroy_sock+0x55/0x110
 inet_csk_listen_stop+0xbb/0x380
 tcp_close+0x41b/0x480
 inet_release+0x42/0x80
 __sock_release+0x3d/0xa0
 sock_close+0x11/0x20
 __fput+0x9d/0x240
 task_work_run+0x62/0x90
 exit_to_user_mode_prepare+0x110/0x120
 syscall_exit_to_user_mode+0x27/0x190
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

The reason we observed is that:

When the listener is closing, a connection may have completed the three-way
handshake but not accepted, and the client has sent some packets. The child
sks in accept queue release by inet_child_forget()->inet_csk_destroy_sock(),
but psocks of child sks have not released.

To fix, add sock_map_destroy to release psocks.
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220524075311.649153-1-wangyufen@huawei.com

Forward the packet to the kernel if the gw router mac address is missing
in to trigger ARP discovery.

Fixes: 85bf1f51 ("samples: bpf: Convert xdp_router_ipv4 to XDP samples helper")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/60bde5496d108089080504f58199bcf1143ea938.1653471558.git.lorenzo@kernel.org

One strategy employed by libbpf to guess the pointer size is by finding
the size of "unsigned long" type. This is achieved by looking for a type
of with the expected name and checking its size.

Unfortunately, the C syntax is friendlier to humans than to computers
as there is some variety in how such a type can be named. Specifically,
gcc and clang do not use the same names for integer types in debug info:

    - clang uses "unsigned long"
    - gcc uses "long unsigned int"

Lookup all the names for such a type so that libbpf can hope to find the
information it wants.
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220524094447.332186-1-douglas.raillard@arm.com

Syzbot found a Use After Free bug in compute_effective_progs().
The reproducer creates a number of BPF links, and causes a fault
injected alloc to fail, while calling bpf_link_detach on them.
Link detach triggers the link to be freed by bpf_link_free(),
which calls __cgroup_bpf_detach() and update_effective_progs().
If the memory allocation in this function fails, the function restores
the pointer to the bpf_cgroup_link on the cgroup list, but the memory
gets freed just after it returns. After this, every subsequent call to
update_effective_progs() causes this already deallocated pointer to be
dereferenced in prog_list_length(), and triggers KASAN UAF error.

To fix this issue don't preserve the pointer to the prog or link in the
list, but remove it and replace it with a dummy prog without shrinking
the table. The subsequent call to __cgroup_bpf_detach() or
__cgroup_bpf_detach() will correct it.

Fixes: af6eea57 ("bpf: Implement bpf_link-based cgroup BPF program attachment")
Reported-by: <syzbot+f264bffdfbd5614f3bb2@syzkaller.appspotmail.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://syzkaller.appspot.com/bug?id=8ebf179a95c2a2670f7cf1ba62429ec044369db4
Link: https://lore.kernel.org/bpf/20220517180420.87954-1-tadeusz.struk@linaro.org

bpf_object__btf() can return a NULL value.  If bpf_object__btf returns
null, do not progress through codegen_asserts(). This avoids a null ptr
dereference at the call btf__type_cnt() in the function find_type_for_map()
Signed-off-by: Michael Mullin <masmullin@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220523194917.igkgorco42537arb@jup

In the commit da00d2f1 ("bpf: Add test ops for BPF_PROG_TYPE_TRACING"),
the bpf_fentry_test1 function was moved into bpf_prog_test_run_tracing(),
which is the test_run function of the tracing BPF programs.

Thus calling 'bpf_prog_test_run_opts(filter_fd, &topts)' will not trigger
bpf_fentry_test1 function as filter_fd is a sk_filter BPF program.

Fix it by replacing filter_fd with fexit_fd in the bpf_prog_test_run_opts()
function.

Fixes: da00d2f1 ("bpf: Add test ops for BPF_PROG_TYPE_TRACING")
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220521151329.648013-1-ytcoode@gmail.com

Daniel Müller says:

====================

This patch set introduces the means for querying a textual representation of
the following BPF related enum types:
- enum bpf_map_type
- enum bpf_prog_type
- enum bpf_attach_type
- enum bpf_link_type

To make that possible, we introduce a new public function for each of the types:
libbpf_bpf_<type>_type_str.

Having a way to query a textual representation has been asked for in the past
(by systemd, among others). Such representations can generally be useful in
tracing and logging contexts, among others. At this point, at least one client,
bpftool, maintains such a mapping manually, which is prone to get out of date as
new enum variants are introduced. libbpf is arguably best situated to keep this
list complete and up-to-date. This patch series adds BTF based tests to ensure
that exhaustiveness is upheld moving forward.

The libbpf provided textual representation can be inferred from the
corresponding enum variant name by removing the prefix and lowercasing the
remainder. E.g., BPF_PROG_TYPE_SOCKET_FILTER -> socket_filter. Unfortunately,
bpftool does not use such a programmatic approach for some of the
bpf_attach_type variants. We decided in favor of changing its behavior to work
with libbpf representations. However, for user inputs, specifically, we do
maintain support for the traditionally used names around (please see patch
"bpftool: Use libbpf_bpf_attach_type_str").

The patch series is structured as follows:
- for each enumeration type in {bpf_prog_type, bpf_map_type, bpf_attach_type,
  bpf_link_type}:
  - we first introduce the corresponding public libbpf API function
  - we then add BTF based self-tests
  - we lastly adjust bpftool to use the libbpf provided functionality
Signed-off-by: Daniel Müller <deso@posteo.net>
Cc: Quentin Monnet <quentin@isovalent.com>
---
Changelog:
v3 -> v4:
- use full string comparison for newly added attach types
- switched away from erroneously used kdoc-style comments
- removed unused prog_types variable and containing section from
  test_bpftool_synctypes.py
- adjusted wording in documentation of get_types_from_array function
- split various test_bpftool_synctypes.py changes into commits where they are
  required to eliminate temporary failures of this test

v2 -> v3:
- use LIBBPF_1.0.0 section in libbpf.map for newly added exports

v1 -> v2:
- adjusted bpftool to work with algorithmically determined attach types as
  libbpf now uses (just removed prefix from enum name and lowercased the rest)
  - adjusted tests, man page, and completion script to work with the new names
  - renamed bpf_attach_type_str -> bpf_attach_type_input_str
  - for input: added special cases that accept the traditionally used strings as
    well
- changed 'char const *' -> 'const char *'
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

This change switches bpftool over to using the recently introduced
libbpf_bpf_link_type_str function instead of maintaining its own string
representation for the bpf_link_type enum.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-13-deso@posteo.net

This change adds a test for libbpf_bpf_link_type_str. The test retrieves
all variants of the bpf_link_type enumeration using BTF and makes sure
that the function under test works as expected for them.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-12-deso@posteo.net

This change introduces a new function, libbpf_bpf_link_type_str, to the
public libbpf API. The function allows users to get a string
representation for a bpf_link_type enum variant.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-11-deso@posteo.net

This change switches bpftool over to using the recently introduced
libbpf_bpf_attach_type_str function instead of maintaining its own
string representation for the bpf_attach_type enum.

Note that contrary to other enum types, the variant names that bpftool
maps bpf_attach_type to do not adhere a simple to follow rule. With
bpf_prog_type, for example, the textual representation can easily be
inferred by stripping the BPF_PROG_TYPE_ prefix and lowercasing the
remaining string. bpf_attach_type violates this rule for various
variants.
We decided to fix up this deficiency with this change, meaning that
bpftool uses the same textual representations as libbpf. Supporting
tests, completion scripts, and man pages have been adjusted accordingly.
However, we did add support for accepting (the now undocumented)
original attach type names when they are provided by users.

For the test (test_bpftool_synctypes.py), I have removed the enum
representation checks, because we no longer mirror the various enum
variant names in bpftool source code. For the man page, help text, and
completion script checks we are now using enum definitions from
uapi/linux/bpf.h as the source of truth directly.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-10-deso@posteo.net

This change adds a test for libbpf_bpf_attach_type_str. The test
retrieves all variants of the bpf_attach_type enumeration using BTF and
makes sure that the function under test works as expected for them.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-9-deso@posteo.net

This change introduces a new function, libbpf_bpf_attach_type_str, to
the public libbpf API. The function allows users to get a string
representation for a bpf_attach_type variant.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-8-deso@posteo.net

This change switches bpftool over to using the recently introduced
libbpf_bpf_map_type_str function instead of maintaining its own string
representation for the bpf_map_type enum.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-7-deso@posteo.net

This change adds a test for libbpf_bpf_map_type_str. The test retrieves
all variants of the bpf_map_type enumeration using BTF and makes sure
that the function under test works as expected for them.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-6-deso@posteo.net

This change introduces a new function, libbpf_bpf_map_type_str, to the
public libbpf API. The function allows users to get a string
representation for a bpf_map_type enum variant.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-5-deso@posteo.net

This change switches bpftool over to using the recently introduced
libbpf_bpf_prog_type_str function instead of maintaining its own string
representation for the bpf_prog_type enum.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-4-deso@posteo.net

This change adds a test for libbpf_bpf_prog_type_str. The test retrieves
all variants of the bpf_prog_type enumeration using BTF and makes sure
that the function under test works as expected for them.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-3-deso@posteo.net

This change introduces a new function, libbpf_bpf_prog_type_str, to the
public libbpf API. The function allows users to get a string
representation for a bpf_prog_type variant.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-2-deso@posteo.net

The insn_to_jit_off passed to bpf_prog_fill_jited_linfo should be the
first byte of the next instruction, or the byte off to the end of the
current instruction.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220530092815.1112406-4-pulehui@huawei.com

Add support for riscv jit to provide bpf_line_info. We need to
consider the prologue offset in ctx->offset, but unlike x86 and
arm64, ctx->offset of riscv does not provide an extra slot for
the prologue, so here we just calculate the len of prologue and
add it to ctx->offset at the end. Both RV64 and RV32 have been
tested.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220530092815.1112406-3-pulehui@huawei.com

We found that 32-bit environment can not print BPF line info due to a data
inconsistency between jited_ksyms[0] and jited_linfo[0].

For example:

  jited_kyms[0] = 0xb800067c, jited_linfo[0] = 0xffffffffb800067c

We know that both of them store BPF func address, but due to the different
data extension operations when extended to u64, they may not be the same.
We need to unify the data extension operations of them.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4BzZ-eDcdJZgJ+Np7Y=V-TVjDDvOMqPwzKjyWrh=i5juv4w@mail.gmail.com
Link: https://lore.kernel.org/bpf/20220530092815.1112406-2-pulehui@huawei.com

Use ida_alloc() / ida_free() instead of the deprecated ida_simple_get() /
ida_simple_remove().
Signed-off-by: Ke Liu <liuke94@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20220527064609.2358482-1-liuke94@huawei.com

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf and netfilter.

  Current release - new code bugs:

   - af_packet: make sure to pull the MAC header, avoid skb panic in GSO

   - ptp_clockmatrix: fix inverted logic in is_single_shot()

   - netfilter: flowtable: fix missing FLOWI_FLAG_ANYSRC flag

   - dt-bindings: net: adin: fix adi,phy-output-clock description syntax

   - wifi: iwlwifi: pcie: rename CAUSE macro, avoid MIPS build warning

  Previous releases - regressions:

   - Revert "net: af_key: add check for pfkey_broadcast in function
     pfkey_process"

   - tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd

   - nf_tables: disallow non-stateful expression in sets earlier

   - nft_limit: clone packet limits' cost value

   - nf_tables: double hook unregistration in netns path

   - ping6: fix ping -6 with interface name

  Previous releases - always broken:

   - sched: fix memory barriers to prevent skbs from getting stuck in
     lockless qdiscs

   - neigh: set lower cap for neigh_managed_work rearming, avoid
     constantly scheduling the probe work

   - bpf: fix probe read error on big endian in ___bpf_prog_run()

   - amt: memory leak and error handling fixes

  Misc:

   - ipv6: expand & rename accept_unsolicited_na to accept_untracked_na"

* tag 'net-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits)
  net/af_packet: make sure to pull mac header
  net: add debug info to __skb_pull()
  net: CONFIG_DEBUG_NET depends on CONFIG_NET
  stmmac: intel: Add RPL-P PCI ID
  net: stmmac: use dev_err_probe() for reporting mdio bus registration failure
  tipc: check attribute length for bearer name
  ice: fix access-beyond-end in the switch code
  nfp: remove padding in nfp_nfdk_tx_desc
  ax25: Fix ax25 session cleanup problems
  net: usb: qmi_wwan: Add support for Cinterion MV31 with new baseline
  sfc/siena: fix wrong tx channel offset with efx_separate_tx_channels
  sfc/siena: fix considering that all channels have TX queues
  socket: Don't use u8 type in uapi socket.h
  net/sched: act_api: fix error code in tcf_ct_flow_table_fill_tuple_ipv6()
  net: ping6: Fix ping -6 with interface name
  macsec: fix UAF bug for real_dev
  octeontx2-af: fix error code in is_valid_offset()
  wifi: mac80211: fix use-after-free in chanctx code
  bonding: guard ns_targets by CONFIG_IPV6
  tcp: tcp_rtx_synack() can be called from process context
  ...

Commit cfc1d277 ("module: Move all into module/") changed the prefix
of the module param by moving/renaming files.  A later commit also moves
the module_param() into a different file, thereby changing the prefix
yet again.

This would break kernel cmdline compatibility and also userspace
compatibility at /sys/module/module/parameters/sig_enforce.

So, set the prefix back to "module.".

Fixes: cfc1d277 ("module: Move all into module/")
Link: https://lore.kernel.org/lkml/20220602034111.4163292-1-saravanak@google.com/
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Aaron Tomlin <atomlin@redhat.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull pci fixes from Bjorn Helgaas:

 - Revert brcmstb patches that broke booting on Raspberry Pi Compute
   Module 4 (Bjorn Helgaas)

 - Fix bridge_d3_blacklist[] error that overwrote the existing Gigabyte
   X299 entry instead of adding a new one (Bjorn Helgaas)

 - Update Lorenzo Pieralisi's email address in MAINTAINERS (Lorenzo
   Pieralisi)

* tag 'pci-v5.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  MAINTAINERS: Update Lorenzo Pieralisi's email address
  PCI/PM: Fix bridge_d3_blacklist[] Elo i2 overwrite of Gigabyte X299
  Revert "PCI: brcmstb: Split brcm_pcie_setup() into two funcs"
  Revert "PCI: brcmstb: Add mechanism to turn on subdev regulators"
  Revert "PCI: brcmstb: Add control of subdevice voltage regulators"
  Revert "PCI: brcmstb: Do not turn off WOL regulators on suspend"

Eric Dumazet says:

====================
net: af_packet: be careful when expanding mac header size

A recent regression in af_packet needed a preliminary debug patch,
which will presumably be useful for next bugs hunting.

The af_packet fix is to make sure MAC headers are contained in
skb linear part, as GSO stack requests.

v2: CONFIG_DEBUG_NET depends on CONFIG_NET to avoid compile
   errors found by kernel bots.
====================

Link: https://lore.kernel.org/r/20220602161859.2546399-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

GSO assumes skb->head contains link layer headers.

tun device in some case can provide base 14 bytes,
regardless of VLAN being used or not.

After blamed commit, we can end up setting a network
header offset of 18+, we better pull the missing
bytes to avoid a posible crash in GSO.

syzbot report was:
kernel BUG at include/linux/skbuff.h:2699!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 3601 Comm: syz-executor210 Not tainted 5.18.0-syzkaller-11338-g2c5ca23f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__skb_pull include/linux/skbuff.h:2699 [inline]
RIP: 0010:skb_mac_gso_segment+0x48f/0x530 net/core/gro.c:136
Code: 00 48 c7 c7 00 96 d4 8a c6 05 cb d3 45 06 01 e8 26 bb d0 01 e9 2f fd ff ff 49 c7 c4 ea ff ff ff e9 f1 fe ff ff e8 91 84 19 fa <0f> 0b 48 89 df e8 97 44 66 fa e9 7f fd ff ff e8 ad 44 66 fa e9 48
RSP: 0018:ffffc90002e2f4b8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000012 RCX: 0000000000000000
RDX: ffff88805bb58000 RSI: ffffffff8760ed0f RDI: 0000000000000004
RBP: 0000000000005dbc R08: 0000000000000004 R09: 0000000000000fe0
R10: 0000000000000fe4 R11: 0000000000000000 R12: 0000000000000fe0
R13: ffff88807194d780 R14: 1ffff920005c5e9b R15: 0000000000000012
FS:  000055555730f300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200015c0 CR3: 0000000071ff8000 CR4: 0000000000350ee0
Call Trace:
 <TASK>
 __skb_gso_segment+0x327/0x6e0 net/core/dev.c:3411
 skb_gso_segment include/linux/netdevice.h:4749 [inline]
 validate_xmit_skb+0x6bc/0xf10 net/core/dev.c:3669
 validate_xmit_skb_list+0xbc/0x120 net/core/dev.c:3719
 sch_direct_xmit+0x3d1/0xbe0 net/sched/sch_generic.c:327
 __dev_xmit_skb net/core/dev.c:3815 [inline]
 __dev_queue_xmit+0x14a1/0x3a00 net/core/dev.c:4219
 packet_snd net/packet/af_packet.c:3071 [inline]
 packet_sendmsg+0x21cb/0x5550 net/packet/af_packet.c:3102
 sock_sendmsg_nosec net/socket.c:714 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:734
 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2492
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2546
 __sys_sendmsg net/socket.c:2575 [inline]
 __do_sys_sendmsg net/socket.c:2584 [inline]
 __se_sys_sendmsg net/socket.c:2582 [inline]
 __x64_sys_sendmsg+0x132/0x220 net/socket.c:2582
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f4b95da06c9
Code: 28 c3 e8 4a 15 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd7defc4c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007ffd7defc4f0 RCX: 00007f4b95da06c9
RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000003
RBP: 0000000000000003 R08: bb1414ac00000050 R09: bb1414ac00000050
R10: 0000000000000004 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffd7defc4e0 R14: 00007ffd7defc4d8 R15: 00007ffd7defc4d4
 </TASK>

Fixes: dfed913e ("net/af_packet: add VLAN support for AF_PACKET SOCK_RAW GSO")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

While analyzing yet another syzbot report, I found the following
patch very useful. It allows to better understand what went wrong.

This debug info is only enabled if CONFIG_DEBUG_NET=y,
which is the case for syzbot builds.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

It makes little sense to debug networking stacks
if networking is not compiled in.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add PCI ID for Ethernet TSN Controller on RPL-P.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Link: https://lore.kernel.org/r/20220602073507.3955721-1-michael.wei.hong.sit@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

I have a board where these two lines are always printed during boot:

   imx-dwmac 30bf0000.ethernet: Cannot register the MDIO bus
   imx-dwmac 30bf0000.ethernet: stmmac_dvr_probe: MDIO bus (id: 1) registration failed

It's perfectly fine, and the device is successfully (and silently, as
far as the console goes) probed later.

Use dev_err_probe() instead, which will demote these messages to debug
level (thus removing the alarming messages from the console) when the
error is -EPROBE_DEFER, and also has the advantage of including the
error code if/when it happens to be something other than -EPROBE_DEFER.

While here, add the missing \n to one of the format strings.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20220602074840.1143360-1-linux@rasmusvillemoes.dkSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot reported uninit-value:
=====================================================
BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:644 [inline]
BUG: KMSAN: uninit-value in string+0x4f9/0x6f0 lib/vsprintf.c:725
 string_nocheck lib/vsprintf.c:644 [inline]
 string+0x4f9/0x6f0 lib/vsprintf.c:725
 vsnprintf+0x2222/0x3650 lib/vsprintf.c:2806
 vprintk_store+0x537/0x2150 kernel/printk/printk.c:2158
 vprintk_emit+0x28b/0xab0 kernel/printk/printk.c:2256
 vprintk_default+0x86/0xa0 kernel/printk/printk.c:2283
 vprintk+0x15f/0x180 kernel/printk/printk_safe.c:50
 _printk+0x18d/0x1cf kernel/printk/printk.c:2293
 tipc_enable_bearer net/tipc/bearer.c:371 [inline]
 __tipc_nl_bearer_enable+0x2022/0x22a0 net/tipc/bearer.c:1033
 tipc_nl_bearer_enable+0x6c/0xb0 net/tipc/bearer.c:1042
 genl_family_rcv_msg_doit net/netlink/genetlink.c:731 [inline]

- Do sanity check the attribute length for TIPC_NLA_BEARER_NAME.
- Do not use 'illegal name' in printing message.

Reported-by: syzbot+e820fdc8ce362f2dea51@syzkaller.appspotmail.com
Fixes: cb30a633 ("tipc: refactor function tipc_enable_bearer()")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Link: https://lore.kernel.org/r/20220602063053.5892-1-hoang.h.le@dektech.com.auSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull ceph updates from Ilya Dryomov:
 "A big pile of assorted fixes and improvements for the filesystem with
  nothing in particular standing out, except perhaps that the fact that
  the MDS never really maintained atime was made official and thus it's
  no longer updated on the client either.

  We also have a MAINTAINERS update: Jeff is transitioning his
  filesystem maintainership duties to Xiubo"

* tag 'ceph-for-5.19-rc1' of https://github.com/ceph/ceph-client: (23 commits)
  MAINTAINERS: move myself from ceph "Maintainer" to "Reviewer"
  ceph: fix decoding of client session messages flags
  ceph: switch TASK_INTERRUPTIBLE to TASK_KILLABLE
  ceph: remove redundant variable ino
  ceph: try to queue a writeback if revoking fails
  ceph: fix statfs for subdir mounts
  ceph: fix possible deadlock when holding Fwb to get inline_data
  ceph: redirty the page for writepage on failure
  ceph: try to choose the auth MDS if possible for getattr
  ceph: disable updating the atime since cephfs won't maintain it
  ceph: flush the mdlog for filesystem sync
  ceph: rename unsafe_request_wait()
  libceph: use swap() macro instead of taking tmp variable
  ceph: fix statx AT_STATX_DONT_SYNC vs AT_STATX_FORCE_SYNC check
  ceph: no need to invalidate the fscache twice
  ceph: replace usage of found with dedicated list iterator variable
  ceph: use dedicated list iterator variable
  ceph: update the dlease for the hashed dentry when removing
  ceph: stop retrying the request when exceeding 256 times
  ceph: stop forwarding the request when exceeding 256 times
  ...

Merge tag 'livepatching-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching

Pull livepatching cleanup from Petr Mladek:

 - Remove duplicated livepatch code [Christophe]

* tag 'livepatching-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  livepatch: Remove klp_arch_set_pc() and asm/livepatch.h

Pull printk fixup from Petr Mladek:

 - Revert inappropriate use of wake_up_interruptible_all() in printk()

* tag 'printk-for-5.19-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  Revert "printk: wake up all waiters"

Pull memblock test suite updates from Mike Rapoport:
 "Comment updates for memblock test suite

  Update comments in the memblock tests so that they will have
  consistent style"

* tag 'memblock-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock tests: remove completed TODO item
  memblock tests: update style of comments for memblock_free_*() functions
  memblock tests: update style of comments for memblock_remove_*() functions
  memblock tests: update style of comments for memblock_reserve_*() functions
  memblock tests: update style of comments for memblock_add_*() functions

The "data->block[0]" variable comes from the user and is a number
between 0-255.  It needs to be capped to prevent writing beyond the end
of dma_buffer[].

Fixes: 5e9a97b1 ("i2c: ismt: Adding support for I2C_SMBUS_BLOCK_PROC_CALL")
Reported-and-tested-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Global `-Warray-bounds` enablement revealed some problems, one of
which is the way we define and use AQC rules messages.
In fact, they have a shared header, followed by the actual message,
which can be of one of several different formats. So it is
straightforward enough to define that header as a separate struct
and then embed it into message structures as needed, but currently
all the formats reside in one union coupled with the header. Then,
the code allocates only the memory needed for a particular message
format, leaving the union potentially incomplete.
There are no actual reads or writes beyond the end of an allocated
chunk, but at the same time, the whole implementation is fragile and
backed by an equilibrium rather than strong type and memory checks.

Define the structures the other way around: one for the common
header and the rest for the actual formats with the header embedded.
There are no places where several union members would be used at the
same time anyway. This allows to use proper struct_size() and let
the compiler know what is going to be done.
Finally, unsilence `-Warray-bounds` back for ice_switch.c.

Other little things worth mentioning:
* &ice_sw_rule_vsi_list_query is not used anywhere, remove it. It's
  weird anyway to talk to hardware with purely kernel types
  (bitmaps);
* expand the ICE_SW_RULE_*_SIZE() macros to pass a structure
  variable name to struct_size() to let it do strict typechecking;
* rename ice_sw_rule_lkup_rx_tx::hdr to ::hdr_data to keep ::hdr
  for the header structure to have the same name for it constistenly
  everywhere;
* drop the duplicate of %ICE_SW_RULE_RX_TX_NO_HDR_SIZE residing in
  ice_switch.h.

Fixes: 9daf8208 ("ice: Add support for switch filter programming")
Fixes: 66486d89 ("ice: replace single-element array used for C struct hack")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220601105924.2841410-1-alexandr.lobakin@intel.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

NFDK firmware supports 48-bit dma addressing and
parses 16 high bits of dma addresses.

In nfp_nfdk_tx_desc, dma related structure and tso
related structure are union. When "mss" be filled
with nonzero value due to enable tso, the memory used
by "padding" may be also filled. Then, firmware may
parse wrong dma addresses which causes TX watchdog
timeout problem.

This patch removes padding and unifies the dma_addr_hi
bits with the one in firmware. nfp_nfdk_tx_desc_set_dma_addr
is also added to match this change.

Fixes: c10d12e3 ("nfp: add support for NFDK data path")
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220601083449.50556-1-simon.horman@corigine.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>