- 13 Jan, 2017 6 commits
-
-
Nagaraju, Vathsala authored
As per bpsec, CHICKEN_TRANS_EDP bit 12 ,15 must be programmed in psr2 enable sequence. bit 12 : Program Transcoder EDP VSC DIP header with a valid setting for PSR2 and Set CHICKEN_TRANS_EDP(0x420cc) bit 12 for programmable header packet. bit 15 : Set CHICKEN_TRANS_EDP(0x420cc) bit 15 if Y coordinate is supported v2: (Rodrigo) - move CHICKEN_TRANS_EDP bit set logic right after setup_vsc v3:(Rodrigo) - initialize chicken_trans to CHICKEN_TRANS_BIT12 instead of 0 v4:(chris wilson) - use BIT(12), remove CHICKEN_TRANS_BIT12 - remove unnecessary comments - update commit message v5: - rename bit 12 PSR2_VSC_ENABLE_PROG_HEADER - rename bit 15 PSR2_ADD_VERTICAL_LINE_COUNT v6:(Rodrigo) - remove TRANS_EDP=3, use cpu_transcoder Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Signed-off-by:vathsala nagaraju <vathsala.nagaraju@intel.com> Signed-off-by:
Patil Deepti <deepti.patil@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Chris Wilson authored
We currently check after the slow path that the vma is bound correctly, but we don't currently check after the fast path. This is important in case we accidentally take the fast path and leave the vma misplaced. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170111210937.29252-27-chris@chris-wilson.co.ukReviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
Move it alongside its ppgtt counterparts, in order to make it available for the ppgtt selftests. Signed-off-by:
-
Nagaraju, Vathsala authored
As per edp1.4 spec , alpm is required for psr2 operation as it's used for all psr2 main link power down management and alpm enable bit must be set for psr2 operation. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Signed-off-by:
Jim Bride <jim.bride@linux.intel.com> Signed-off-by:
-
Nagaraju, Vathsala authored
Screen freeze observed if AUX_FRAME_SYNC is not disabled on psr2 exit.AUX_FRAME_SYNC needed for psr2 is enabled during psr2 entry. It must be disabled on psr2 exit. v2: rebase Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Signed-off-by:
-
Nagaraju, Vathsala authored
Psr1 and psr2 are mutually exclusive,ie when psr2 is enabled, psr1 should be disabled.When psr2 is exited , bit 31 of reg PSR2_CTL must be set to 0 but currently bit 31 of SRD_CTL (psr1 control register)is set to 0. Also ,PSR2_IDLE state is looked up from SRD_STATUS(psr1 register) instead of PSR2_STATUS register, which has wrong data, resulting in blankscreen. hsw_enable_source is split into hsw_enable_source_psr1 and hsw_enable_source_psr2 for easier code review and maintenance, as suggested by rodrigo and jim. v2: (Rodrigo) - Rename hsw_enable_source_psr* to intel_enable_source_psr* v3: (Rodrigo) - In hsw_psr_disable , 1) for psr active case, handle psr2 followed by psr1. 2) psr inactive case, handle psr2 followed by psr1 v4:(Rodrigo) - move psr2 restriction(32X20) to match_conditions function returning false and fully blocking PSR to a new patch before this one. v5: in source_psr2, removed val = EDP_PSR_ENABLE Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Signed-off-by:
-
- 12 Jan, 2017 14 commits
-
-
Chris Wilson authored
Parameter: good. Parameter - bad. One day I'll learn the syntax. Fixes: 625d988a ("drm/i915: Extract reserving space in the GTT to a helper") Fixes: e007b19d ("drm/i915: Use the MRU stack search after evicting") Signed-off-by:
Matthew Auld <matthew.auld@intel.com>
-
Chris Wilson authored
When dumping the VMA, include the parameters of the different GGTT views so that we can distinguish them. v2: Contract output and add MISSING_CASE for any unknown types. v3: Show both stride and offset for rotated planes. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170112112108.31632-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
The internal object is a collection of struct pages and so is intrinsically linked to the available physical memory on the machine, and not an arbitrary type from the uabi. Use phys_addr_t so the link between size and memory consumption is clear, and then double check that we don't overflow the maximum object size. v2: Also assert that size is not zero - a mistake I made a few times while writing selftests. Signed-off-by:
-
Chris Wilson authored
Move the GuC invalidation of its ggtt TLB to where we perform the ggtt modification rather than proliferate it into all the callers of the insert (which may or may not in fact have to do the insertion). v2: Just do the guc invalidate unconditionally, (afaict) it has no impact without the guc loaded on gen8+ v3: Conditionally invalidate the guc - just in case that register has not been validated for other modes. Signed-off-by:
-
Maarten Lankhorst authored
The visible member used to be in intel_plane_state->visible, but has been moved to drm_plane_state->visible. In the conversion some casts were left in that are now useless. to_intel_plane_state(x)->base.visible is the same as x->visible, so use the latter to clear up the code a little. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484214225-30328-1-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com>
-
Michel Thierry authored
Since commit c033666a ("drm/i915: Store a i915 backpointer from engine, and use it") i915_reset receives dev_priv, but the kerneldoc was not updated. Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
-
Michel Thierry authored
And before the function description. Tidy up from commit 14bb2c11 ("drm/i915: Fix a buch of kerneldoc warnings"), all others kerneldoc blocks look ok. Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
Francisco Jerez authored
The WaDisableLSQCROPERFforOCL workaround has the side effect of disabling an L3SQ optimization that has huge performance implications and is unlikely to be necessary for the correct functioning of usual graphic workloads. Userspace is free to re-enable the workaround on demand, and is generally in a better position to determine whether the workaround is necessary than the DRM is (e.g. only during the execution of compute kernels that rely on both L3 fences and HDC R/W requests). The same workaround seems to apply to BDW (at least to production stepping G1) and SKL as well (the internal workaround database claims that it does for all steppings, while the BSpec workaround table only mentions pre-production steppings), but the DRM doesn't do anything beyond whitelisting the L3SQCREG4 register so userspace can enable it when it sees fit. Do the same on KBL platforms. Improves performance of the GFXBench4 gl_manhattan31 benchmark by 60%, and gl_4 (AKA car chase) by 14% on a KBL GT2 running Mesa master -- This is followed by a regression of 35% and 10% respectively for the same benchmarks and platform caused by my recent patch series switching userspace to use the dataport constant cache instead of the sampler to implement uniform pull constant loads, which caused us to hit more heavily the L3 cache (and on platforms other than KBL had the opposite effect of improving performance of the same two benchmarks). The overall effect on KBL of this change combined with the recent userspace change is respectively 4.6% and 2.6%. SynMark2 OglShMapPcf was affected by the constant cache changes (though it improved as it did on other platforms rather than regressing), but is not significantly affected by this patch (with statistical significance of 5% and sample size 20). v2: Drop some more code to avoid unused variable warning. Fixes: 738fa1b3 ("drm/i915/kbl: Add WaDisableLSQCROPERFforOCL") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99256Signed-off-by:
Francisco Jerez <currojerez@riseup.net> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Eero Tamminen <eero.t.tamminen@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: beignet@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.7+ Reviewed-by:
-
Michał Winiarski authored
Since commit 4741da92 ("drm/i915/guc: Assert that all GGTT offsets used by the GuC are mappable"), we're asserting that GuC firmware is in the GuC mappable range. Except we're not pinning the object with bias, which means it's possible to trigger this assert. Let's add a proper bias. Fixes: 4741da92 ("drm/i915/guc: Assert that all GGTT offsets used by the GuC are mappable") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Reviewed-by:
Tomi Sarvela <tomi.p.sarvela@intel.com> Signed-off-by:
-
Libin Yang authored
Add the documentation about HD-audio DP MST: 1. pin initialization 2. device entry connection list Reviewed-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Libin Yang <libin.yang@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1484208294-8637-4-git-send-email-libin.yang@intel.com
-
Libin Yang authored
This patch adds the DP MST audio support on i915 platform and it will enable dyn_pcm_assign feature. DP MST supports several device entry on the same port and each device entry can map to one pcm stream. For example, on i915, there are 3 pins, and each pin has 3 device entries. This means there should be 3x3 pcms. However, there is only 3 pipe lines in i915. This means 3 pcms are actived at most at the same moment. We will create 5 pcms (pin number + dev entry num - 1) in this case. For the details, please refer commit a76056f2 ("ALSA: hda - hdmi dynamically bind PCM to pin when monitor hotplug") Each device entry is a virtual pin. It is described by pin_nid and dev_id in struct hdmi_spec_per_pin. Reviewed-by:
Libin Yang <libin.yang@linux.intel.com> Signed-off-by:
-
Libin Yang authored
Add snd_hda_get_dev_select() and snd_hda_set_dev_select() functions for DP MST audio support. Reviewed-by:
-
Zhenyu Wang authored
Check if ppgtt is valid for context when init reg state. For gvt context which has no i915 allocated ppgtt, failed to check that would cause kernel null ptr reference error. v2: remove !48bit ppgtt case as we'll always update before submit (Chris) Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Reviewed-by:
-
Chris Wilson authored
The vma->exec_list is still the only means we have for both reserving an object in execbuf, and for constructing the eviction list. So during the construction of the eviction list, we must treat anything already on the exec_list as being pinned. Yes, this sharing of two semantically different lists will be fixed! But in the meantime, we have the issue that this is tripping up CI since we started using i915_gem_gtt_reserve_node() + i915_gem_evict_for_node() from the regular execbuf reservation path in commit 606fec95 ("drm/i915: Prefer random replacement before eviction search"): [ 108.424063] kernel BUG at drivers/gpu/drm/i915/i915_vma.h:254! [ 108.424072] invalid opcode: 0000 [#1] PREEMPT SMP [ 108.424079] Modules linked in: snd_hda_intel i915 intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_hdmi snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core mei_me snd_pcm lpc_ich mei sdhci_pci sdhci mmc_core e1000e ptp pps_core [last unloaded: i915] [ 108.424132] CPU: 1 PID: 6865 Comm: gem_cs_tlb Tainted: G U 4.10.0-rc3-CI-CI_DRM_2049+ #1 [ 108.424143] Hardware name: Hewlett-Packard HP EliteBook 8440p/172A, BIOS 68CCU Ver. F.24 09/13/2013 [ 108.424154] task: ffff88012ae22600 task.stack: ffffc90000a14000 [ 108.424220] RIP: 0010:i915_gem_evict_for_node+0x237/0x410 [i915] [ 108.424229] RSP: 0018:ffffc90000a17a58 EFLAGS: 00010202 [ 108.424237] RAX: 0000000000005871 RBX: ffff88012d1ad778 RCX: 0000000000000000 [ 108.424246] RDX: 000000007ffff000 RSI: ffffc90000a17a68 RDI: ffff880127e694d8 [ 108.424255] RBP: ffffc90000a17aa0 R08: ffffc90000a17a68 R09: 0000000000000000 [ 108.424264] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000080000000 [ 108.424273] R13: ffffc90000a17a68 R14: ffff880127e694d8 R15: ffffffffa0387330 [ 108.424283] FS: 00007f8236e3d8c0(0000) GS:ffff880137c40000(0000) knlGS:0000000000000000 [ 108.424293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 108.424305] CR2: 00007f82347a2000 CR3: 000000012c866000 CR4: 00000000000006e0 [ 108.424317] Call Trace: [ 108.424368] i915_gem_gtt_reserve+0x67/0x80 [i915] [ 108.424424] __i915_vma_do_pin+0x248/0x620 [i915] [ 108.424487] ? __i915_vma_do_pin+0x162/0x620 [i915] [ 108.424540] i915_gem_execbuffer_reserve_vma.isra.8+0x153/0x1f0 [i915] [ 108.424591] i915_gem_execbuffer_reserve.isra.9+0x40e/0x440 [i915] [ 108.424643] i915_gem_do_execbuffer.isra.15+0x6d9/0x1b20 [i915] [ 108.424696] i915_gem_execbuffer2+0xc0/0x250 [i915] [ 108.424712] drm_ioctl+0x200/0x450 [ 108.424760] ? i915_gem_execbuffer+0x330/0x330 [i915] [ 108.424776] do_vfs_ioctl+0x90/0x6e0 [ 108.424789] ? up_read+0x1a/0x40 [ 108.424800] ? trace_hardirqs_on_caller+0x122/0x1b0 [ 108.424813] SyS_ioctl+0x3c/0x70 [ 108.424828] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 108.424839] RIP: 0033:0x7f8235867357 [ 108.424848] RSP: 002b:00007ffdc14504c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 108.424866] RAX: ffffffffffffffda RBX: 00007ffdc1450600 RCX: 00007f8235867357 [ 108.424878] RDX: 00007ffdc14505a0 RSI: 0000000040406469 RDI: 0000000000000003 [ 108.424890] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000022 [ 108.424903] R10: 0000000000000007 R11: 0000000000000246 R12: 0000000000000002 [ 108.424915] R13: 0000000000419101 R14: 00007ffdc1450600 R15: 00007ffdc14505f0 [ 108.424928] Code: 45 b8 8b 4d c0 4c 89 f2 48 89 de ff d0 49 8b 07 4c 8b 45 b8 48 85 c0 75 dd 65 ff 0d d4 a1 c8 5f 0f 84 47 01 00 00 e9 0d fe ff ff <0f> 0b 45 31 f6 4c 8b 65 c8 49 8b 04 24 4d 39 ec 49 8d 9c 24 28 [ 108.425055] RIP: i915_gem_evict_for_node+0x237/0x410 [i915] RSP: ffffc90000a17a58 Fixes: 172ae5b4 ("drm/i915: Fix i915_gem_evict_for_vma (soft-pinning)") Fixes: 606fec95 ("drm/i915: Prefer random replacement before eviction search") Signed-off-by:
-
- 11 Jan, 2017 4 commits
-
-
Chris Wilson authored
It is an error to start a new request on the same timeline (ringbuffer) as the current one before the current is submitted. If there are two requests emitting to the ringbuffer at the same time, the operation is undefined. We can catch this by checking for the timeline having a later seqno than ours when we come to submit our request. Currently we have this check at the end of __i915_add_request, but having an early check as well isolates a failure in the caller versus a failure in sealing the request (i.e. from inside __i915_add_request itself). For example, CI is currently tripping over this late assertion on ctg/ilk: [ 100.329399] [IGT] gem_cs_tlb: starting subtest basic-default [ 100.336333] ------------[ cut here ]------------ [ 100.336341] kernel BUG at drivers/gpu/drm/i915/i915_gem_request.c:908! [ 100.336347] invalid opcode: 0000 [#1] PREEMPT SMP [ 100.336351] Modules linked in: snd_hda_intel i915 snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm coretemp mei_me lpc_ich mei e1000e ptp pps_core [last unloaded: i915] [ 100.336373] CPU: 0 PID: 6308 Comm: gem_cs_tlb Tainted: G U 4.10.0-rc3-CI-CI_DRM_2045+ #1 [ 100.336380] Hardware name: LENOVO 7465CTO/7465CTO, BIOS 6DET44WW (2.08 ) 04/22/2009 [ 100.336386] task: ffff88012b738040 task.stack: ffffc90000560000 [ 100.336441] RIP: 0010:__i915_add_request+0x4aa/0x510 [i915] [ 100.336445] RSP: 0018:ffffc90000563ac0 EFLAGS: 00010212 [ 100.336451] RAX: 0000000000005d52 RBX: ffff880133bb84c0 RCX: 0000000000000001 [ 100.336456] RDX: 0000000080000001 RSI: ffff88012b738860 RDI: 00000000ffffffff [ 100.336461] RBP: ffffc90000563b00 R08: ffff880133bb8780 R09: 0000000000000000 [ 100.336466] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88012f53d950 [ 100.336472] R13: ffff88012a2b0af8 R14: ffff88012a5b0008 R15: ffff88012f53d960 [ 100.336477] FS: 00007f0d19da38c0(0000) GS:ffff88013bc00000(0000) knlGS:0000000000000000 [ 100.336483] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 100.336488] CR2: 00007f0d17706000 CR3: 000000012aa3e000 CR4: 00000000000406f0 [ 100.336496] Call Trace: [ 100.336527] i915_gem_switch_to_kernel_context+0x131/0x1b0 [i915] [ 100.336559] i915_gem_evict_vm+0x202/0x2b0 [i915] [ 100.336590] i915_gem_execbuffer_reserve.isra.9+0x3ae/0x440 [i915] [ 100.336623] i915_gem_do_execbuffer.isra.15+0x6d9/0x1b20 [i915] [ 100.336656] i915_gem_execbuffer2+0xc0/0x250 [i915] [ 100.336666] drm_ioctl+0x200/0x450 [ 100.336697] ? i915_gem_execbuffer+0x330/0x330 [i915] [ 100.336708] do_vfs_ioctl+0x90/0x6e0 [ 100.336716] ? up_read+0x1a/0x40 [ 100.336723] ? trace_hardirqs_on_caller+0x122/0x1b0 [ 100.336730] SyS_ioctl+0x3c/0x70 [ 100.336738] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 100.336745] RIP: 0033:0x7f0d187cb357 [ 100.336750] RSP: 002b:00007ffe0b2f7c28 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 100.336761] RAX: ffffffffffffffda RBX: 00007ffe0b2f7d60 RCX: 00007f0d187cb357 [ 100.336768] RDX: 00007ffe0b2f7d00 RSI: 0000000040406469 RDI: 0000000000000003 [ 100.336775] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000022 [ 100.336782] R10: 0000000000000007 R11: 0000000000000246 R12: 0000000000000002 [ 100.336789] R13: 0000000000419101 R14: 00007ffe0b2f7d60 R15: 00007ffe0b2f7d50 [ 100.336797] Code: 5f 74 1e e9 d4 fb ff ff e8 bc 1e 9c e0 e9 ae fb ff ff 4c 89 e7 e8 77 22 fd ff e9 88 fd ff ff 0f 0b e8 a3 1e 9c e0 e9 b1 fb ff ff <0f> 0b 0f 0b e8 fd af ab e0 85 c0 75 c2 48 c7 c2 80 2c 71 a0 be [ 100.336877] RIP: __i915_add_request+0x4aa/0x510 [i915] RSP: ffffc90000563ac0 [ 100.336886] ---[ end trace 22b36545479e5eb7 ]--- Signed-off-by:
-
Chris Wilson authored
Performing an eviction search can be very, very slow especially for a range restricted replacement. For example, a workload like gem_concurrent_blit will populate the entire GTT and then cause aperture thrashing. Since the GTT is a mix of active and inactive tiny objects, we have to search through almost 400k objects before finding anything inside the mappable region, and as this search is required before every operation performance falls off a cliff. Instead of performing the full search, we do a trial replacement of the node at a random location fitting the specified restrictions. We lose the strict LRU property of the GTT in exchange for avoiding the slow search (several orders of runtime improvement for gem_concurrent_blit 4KiB-global-gtt, e.g. from 5000s to 20s). The loss of LRU replacement is (later) mitigated firstly by only doing replacement if we find no freespace and secondly by execbuf doing a PIN_NONBLOCK search first before it starts thrashing (i.e. the random replacement will only occur from the already inactive set of objects). v2: Ascii-art, and check preconditionst v3: Rephrase final sentence in comment to explain why we don't bother with if (i915_is_ggtt(vm)) for preferring random replacement. Signed-off-by:
-
Chris Wilson authored
Extract drm_mm_reserve_node + calling i915_gem_evict_for_node into its own routine so that it can be shared rather than duplicated. v2: Kerneldoc Signed-off-by:
-
Chris Wilson authored
When we evict from the GTT to make room for an object, the hole we create is put onto the MRU stack inside the drm_mm range manager. On the next search pass, we can speed up a PIN_HIGH allocation by referencing that stack for the new hole. v2: Pull together the 3 identical implements (ahem, a couple were outdated) into a common routine for allocating a node and evicting as necessary. v3: Detect invalid calls to i915_gem_gtt_insert() v4: kerneldoc Signed-off-by:
-
- 10 Jan, 2017 16 commits
-
-
Nagaraju, Vathsala authored
PSR2 is restricted to work with panel resolutions upto 3200x2000, move the check to intel_psr_match_conditions and fully block psr. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Suggested-by:
-
Nagaraju, Vathsala authored
Function hsw_psr_setup handles vsc header setup for psr1 and skl_psr_setup_vsc handles vsc header setup for psr2. Setup VSC header in function skl_psr_setup_vsc for psr2 support, as per edp 1.4 spec, table 6-11:VSC SDP HEADER Extension for psr2 operation. v2: (Jani) - Initialize variables to 0 - intel_dp_get_y_cord_status and intel_dp_get_y_cord_status made static - Correct indentation for continuation lines - Change DP_PSR_Y_COORDINATE to DP_PSR2_SU_Y_COORDINATE_REQUIRED - Change DPRX_FEATURE_ENUMERATION_LIST to DP_DPRX_* - Change VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED to DP_VSC_* Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Signed-off-by:
-
Nagaraju, Vathsala authored
PSR2 vsc revision number hb2( as per table 6-11)is updated to 4 or 5 based on Y cordinate and Colorimetry Format as below 04h = 3D stereo + PSR/PSR2 + Y-coordinate. 05h = -3D stereo- + PSR/PSR2 + Y-coordinate + Pixel Encoding/Colorimetry Format indication. A DP Source device is allowed to indicate the pixel encoding/colorimetry format to the DP Sink device with VSC SDP only when the DP Sink device supports it ( i.e.,VSC_SDP_EXTENSION_FOR_COLORIMETRY_SUPPORTED bit in the DPRX_FEATURE_ENUMERATION_LIST register (DPCD Address 02210h, bit 3; is set to 1). v2: (Jani) - Change DP_PSR_Y_COORDINATE to DP_PSR2_SU_Y_COORDINATE_REQUIRED. - Add DP_PSR2_SU_GRANULARITY_REQUIRED. - Change DPRX_FEATURE_ENUMERATION_LIST to DP_DPRX. - Add GTC_CAP and AV_SYNC_CAP, other bits in DPRX_FEATURE_ENUMERATION_LIST. v3: (Jani) - Add support for bits 7:4 and 1 as per DP v1.4 for DPRX_FEATURE_ENUMERATION_LIST. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Chris Wilson authored
Start converting over from the byte count to its semantic macro, either we want to allocate the size of a physical page in main memory or we want the size of a virtual page in the GTT. 4096 could mean either, but PAGE_SIZE and I915_GTT_PAGE_SIZE are explicit and should help improve code comprehension and future changes. In the future, we may want to use variable GTT page sizes and so have the challenge of knowing which hardcoded values were used to represent a physical page vs the virtual page. v2: Look for a few more 4096s to convert, discover IS_ALIGNED(). v3: 4096ul paranoia, make fence alignment a distinct value of 4096, keep bdw stolen w/a as 4096 until we know better. v4: Add asserts that i915_vma_insert() start/end are aligned to GTT page sizes. Signed-off-by:
-
Chris Wilson authored
It has been some time since i915_gem_engine_cleanup was only called from the module unload path, and now it is only called when the GPU is wedged. Mika complained that the name is confusing, especially in light of the existence of i915_gem_cleanup_engines(). Signed-off-by:
-
Chris Wilson authored
Similarly to a normal reset, after we mark the GPU as wedged (completely fubar and no more requests can be executed), set the error status on all the in flight requests. Signed-off-by:
-
Chris Wilson authored
Let userspace know if its request was resubmitted due to it being executed at the time of a global reset. In this case, the reset was for a guilty request on another engine, and this request was an innocent victim that will be re-executed upon restarting. However, since it was running at the time of the reset, we can not guarantee that it suffered no ill-effects from the reset (e.g. some context state may be lost, or some self-modifying fragment shaders will be restarted from the final state not their initial state), to let userspace know that it has been corrupted set a special value on the fence->error, -EAGAIN. If the request does hang on resubmission, the error will be overwritten with -EIO. Signed-off-by:
-
Chris Wilson authored
The struct dma_fence carries a status field exposed to userspace by sync_file. This is inspected after the fence is signaled and can convey whether or not the request completed successfully, or in our case if we detected a hang during the request (signaled via -EIO in SYNC_IOC_FILE_INFO). v2: Mark all cancelled requests as failed. Signed-off-by:
-
Chris Wilson authored
Always reset the requests of the guilty context, including the hung request that we tell the hardware to skip. This should help if the reprogram fails entirely, but more importantly makes the guilty path more uniform (and simplifies the subsequent patch to tweak the cancelled requests). Signed-off-by:
-
Tomeu Vizoso authored
Use drm_accurate_vblank_count so we have the full 32 bit to represent the frame counter and userspace has a simpler way of knowing when the counter wraps around. Signed-off-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by:
Emil Velikov <emil.velikov@collabora.com> Reviewed-by:
Robert Foss <robert.foss@collabora.com> Signed-off-by:
-
Tomeu Vizoso authored
The core provides now an ABI to userspace for generation of frame CRCs, so implement the ->set_crc_source() callback and reuse as much code as possible with the previous ABI implementation. When handling the pageflip interrupt, we skip 1 or 2 frames depending on the HW because they contain wrong values. For the legacy ABI for generating frame CRCs, this was done in userspace but now that we have a generic ABI it's better if it's not exposed by the kernel. v2: - Leave the legacy implementation in place as the ABI implementation in the core is incompatible with it. v3: - Use the "cooked" vblank counter so we have a whole 32 bits. - Make sure we don't mess with the state of the legacy CRC capture ABI implementation. v4: - Keep use of get_vblank_counter as in the legacy code, will be changed in a followup commit. v5: - Skip first frame or two as it's known that they contain wrong data. - A few fixes suggested by Emil Velikov. v6: - Rework programming of the HW registers to preserve previous behavior. v7: - Address whitespace issue. - Added a comment on why in the implementation of the new ABI we skip the 1st or 2nd frames. v9: - Add stub for intel_crtc_set_crc_source. v12: - Rebased. - Remove stub for intel_crtc_set_crc_source and instead set the callback to NULL (Jani Nikula). v15: - Rebased. Signed-off-by: -
Daniel Vetter authored
Pull in latest drm-next from Dave Airlie to get at all the drm-misc goodies, specifically: - dma_fence error state handling rework (Chris needs that for error recovery) - crc support locking changes (Tomeu's i915 crc patches need that). Signed-off-by:Daniel Vetter <daniel.vetter@intel.com>
-
Chris Wilson authored
Expose an interface for changing the tiling and stride on an object, that includes the complexity of checking for conflicting bindings and fence registers. Signed-off-by:
-
Chris Wilson authored
Make it clear that these functions are the user entry points for the tiling/fence registers. Signed-off-by:
-
Chris Wilson authored
The VMA is later clipped against the vm_area_struct before insertion of the faulting PTE so we are free to create the partial view as we desire. If we use the object as the extents rather than the area, this partial can then be used for other areas. Signed-off-by:
-
Chris Wilson authored
In order to reuse the partial view for selftesting, extract the common function for computing the view. Signed-off-by:
-
