- 13 Feb, 2019 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaDoug Ledford authored
I had merged the hfi1-tid code into my local copy of for-next, but was waiting on 0day testing before pushing it (I pushed it to my wip branch). Having waited several days for 0day testing to show up, I'm finally just going to push it out. In the meantime, though, Jason pushed other stuff to for-next, so I needed to merge up the branches before pushing. Signed-off-by:Doug Ledford <dledford@redhat.com>
-
- 11 Feb, 2019 14 commits
-
-
Colin Ian King authored
The struct member comp_mask has not been initialized however a bit pattern is being bitwise or'd into the member and hence other bit fields in comp_mask may contain any garbage from the stack. Fix this by making the bitwise or into an assignment. Fixes: 95b86d1c ("RDMA/bnxt_re: Update kernel user abi to pass chip context") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Mark Bloch authored
Make sure the IB device is freed on failure. Fixes: b5ca15ad ("IB/mlx5: Add proper representors support") Signed-off-by:
Mark Bloch <markb@mellanox.com> Reviewed-by:
Bodong Wang <bodong@mellanox.com> Reviewed-by:
Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Yishai Hadas authored
Fix bad flow upon DEVX mkey creation to prevent deleting the indirect mkey from the radix tree in case there was a previous failure to insert it. Fixes: 534fd7aa ("IB/mlx5: Manage indirection mkey upon DEVX flow for ODP") Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Reviewed-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
-
Shiraz, Saleem authored
The driver walks the umem SGL assuming a 1:1 mapping between SGE and system page. Update to use the for_each_sg_page iterator to get individual pages contained in the SGEs. This is a pre-requisite before adding page combining into SGEs while building the scatter table in IB core. Additionally, purge umem->page_shift usage in the driver as its only relevant for ODP MRs. Use system page size and shift instead. Signed-off-by:
Shiraz, Saleem <shiraz.saleem@intel.com> Signed-off-by:
-
Shiraz, Saleem authored
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped SGL and get the page DMA address. This avoids the extra loop to iterate pages in the SGE when for_each_sg iterator is used. Additionally, purge umem->page_shift usage in the driver as its only relevant for ODP MRs. Use system page size and shift instead. Signed-off-by:
-
Shiraz, Saleem authored
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped SGL and get the page DMA address. This avoids the extra loop to iterate pages in the SGE when for_each_sg iterator is used. Additionally, purge umem->page_shift usage in the driver as its only relevant for ODP MRs. Use system page size and shift instead. Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
-
Shiraz, Saleem authored
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped SGL and get the page DMA address. This avoids the extra loop to iterate pages in the SGE when for_each_sg iterator is used. Additionally, purge umem->page_shift usage in the driver as its only relevant for ODP MRs. Use system page size and shift instead. Signed-off-by:
-
Shiraz, Saleem authored
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped SGL and get the page DMA address. This avoids the extra loop to iterate pages in the SGE when for_each_sg iterator is used. Additionally, purge umem->page_shift usage in the driver as its only relevant for ODP MRs. Use system page size and shift instead. Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Shiraz, Saleem authored
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped SGL and get the page DMA address. This avoids the extra loop to iterate pages in the SGE when for_each_sg iterator is used. Additionally, purge umem->page_shift usage in the driver as its only relevant for ODP MRs. Use system page size and shift instead. Signed-off-by:
-
Shiraz, Saleem authored
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped SGL and get the page DMA address. This avoids the extra loop to iterate pages in the SGE when for_each_sg iterator is used. Additionally, purge umem->page_shift usage in the driver as its only relevant for ODP MRs. Use system page size and shift instead. Signed-off-by:
-
Shiraz, Saleem authored
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped SGL and get the page DMA address. This avoids the extra loop to iterate pages in the SGE when for_each_sg iterator is used. Additionally, purge umem->page_shift usage in the driver as its only relevant for ODP MRs. Use system page size and shift instead. Signed-off-by:
-
Shiraz, Saleem authored
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped SGL and get the page DMA address. This avoids the extra loop to iterate pages in the SGE when for_each_sg iterator is used. Additionally, purge umem->page_shift usage in the driver as its only relevant for ODP MRs. Use system page size and shift instead. Signed-off-by:
-
Shiraz, Saleem authored
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped SGL and get the page DMA address. This avoids the extra loop to iterate pages in the SGE when for_each_sg iterator is used. Additionally, purge umem->page_shift usage in the driver as its only relevant for ODP MRs. Use system page size and shift instead. Signed-off-by:
-
Jason Gunthorpe authored
Commit 2db76d7c ("lib/scatterlist: sg_page_iter: support sg lists w/o backing pages") introduced the sg_page_iter_dma_address() function without providing a way to use it in the general case. If the sg_dma_len() is not equal to the sg length callers cannot safely use the for_each_sg_page/sg_page_iter_dma_address combination. Resolve this API mistake by providing a DMA specific iterator, for_each_sg_dma_page(), that uses the right length so sg_page_iter_dma_address() works as expected with all sglists. A new iterator type is introduced to provide compile-time safety against wrongly mixing accessors and iterators. Acked-by: Christoph Hellwig <hch@lst.de> (for scatterlist) Acked-by:
Thomas Hellstrom <thellstrom@vmware.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> (ipu3-cio2) Signed-off-by:
-
- 09 Feb, 2019 5 commits
-
-
Doug Ledford authored
Due to concurrent work by myself and Jason, a normal fast forward merge was not possible. This brings in a number of hfi1 changes, mainly the hfi1 TID RDMA support (roughly 10,000 LOC change), which was reviewed and integrated over a period of days. Signed-off-by: -
Doug Ledford authored
Omni-Path TID RDMA Feature Intel Omni-Path (OPA) TID RDMA support is a feature that accelerates data movement between two OPA nodes through the IB Verbs interface. It improves RDMA READ/WRITE performance by delivering the data payload to a user buffer directly without any software copying. Architecture ============= The TID RDMA protocol is implemented on the hfi1 driver level and is therefore transparent to the ULPs. It is designed to facilitate the data transactions for two specific RDMA requests: - RDMA READ; - RDMA WRITE. Previously, when a verbs data packet is received at the destination (requester side for RDMA READ and responder side for RDMA WRITE), the data payload is copied to the user buffer by software, which slows down the performance significantly for large requests. Internally, hfi1 converts qualified RDMA READ/WRITE requests into TID RDMA READ/WRITE requests when the requests are post sent to the hfi1 driver. Non-qualified RDMA requests are handled by normal RDMA protocol. For TID RDMA requests, hardware resources (hardware flow and TID entries) are allocated on the destination side (the requester side for TID RDMA READ and the responder side for TID RDMA WRITE). The information for these resources is conveyed to the data source side (the responder side for TID RDMA READ and the requester side for TID RDMA WRITE) and embedded in data packets. When data packets are received by the destination, hardware will deliver the data payload to the destination buffer without involving software and therefore improve the performance. Details ======= RDMA READ/WRITE requests are qualified by the following: - Total data length >= 256k; - Totoal data length is a multiple of 4K pages. Additional qualifications are enforced for the destination buffers: For RDMA RAED: - Each destination sge buffer is 4K aligned; - Each destination sge buffer is a multiple of 4K pages. For RDMA WRITE: - The destination number is 4K aligned. In addition, in an OPA fabric, some nodes may support TID RDMA while others may not. As such, it is important for two transaction nodes to exchange the information about the features they support. This discovery mechanism is called OPA Feature Negotion (OPFN) and is described in details in the patch series. Through OPFN, two nodes can find whether they both support TID RDMA and subsequently convert RDMA requests into TID RDMA requests. * hfi1-tid: (46 commits) IB/hfi1: Prioritize the sending of ACK packets IB/hfi1: Add static trace for TID RDMA WRITE protocol IB/hfi1: Enable TID RDMA WRITE protocol IB/hfi1: Add interlock between TID RDMA WRITE and other requests IB/hfi1: Add TID RDMA WRITE functionality into RDMA verbs IB/hfi1: Add the dual leg code IB/hfi1: Add the TID second leg ACK packet builder IB/hfi1: Add the TID second leg send packet builder IB/hfi1: Resend the TID RDMA WRITE DATA packets IB/hfi1: Add a function to receive TID RDMA RESYNC packet IB/hfi1: Add a function to build TID RDMA RESYNC packet IB/hfi1: Add TID RDMA retry timer IB/hfi1: Add a function to receive TID RDMA ACK packet IB/hfi1: Add a function to build TID RDMA ACK packet IB/hfi1: Add a function to receive TID RDMA WRITE DATA packet IB/hfi1: Add a function to build TID RDMA WRITE DATA packet IB/hfi1: Add a function to receive TID RDMA WRITE response IB/hfi1: Add TID resource timer IB/hfi1: Add a function to build TID RDMA WRITE response IB/hfi1: Add functions to receive TID RDMA WRITE request ... Signed-off-by: -
Raju Rangoju authored
When an application aborts the connection by moving QP from RTS to ERROR, then iw_cxgb4's modify_rc_qp() RTS->ERROR logic sets the *srqidxp to 0 via t4_set_wq_in_error(&qhp->wq, 0), and aborts the connection by calling c4iw_ep_disconnect(). c4iw_ep_disconnect() does the following: 1. sends up a close_complete_upcall(ep, -ECONNRESET) to libcxgb4. 2. sends abort request CPL to hw. But, since the close_complete_upcall() is sent before sending the ABORT_REQ to hw, libcxgb4 would fail to release the srqidx if the connection holds one. Because, the srqidx is passed up to libcxgb4 only after corresponding ABORT_RPL is processed by kernel in abort_rpl(). This patch handle the corner-case by moving the call to close_complete_upcall() from c4iw_ep_disconnect() to abort_rpl(). So that libcxgb4 is notified about the -ECONNRESET only after abort_rpl(), and libcxgb4 can relinquish the srqidx properly. Signed-off-by:
Raju Rangoju <rajur@chelsio.com> Signed-off-by:
-
Raju Rangoju authored
If TP fetches an SRQ buffer but ends up not using it before the connection is aborted, then it passes the index of that SRQ buffer to the host in ABORT_REQ_RSS or ABORT_RPL CPL message. But, if the srqidx field is zero in the received ABORT_RPL or ABORT_REQ_RSS CPL, then we need to read the tcb.rq_start field to see if it really did have an RQE cached. This works around a case where HW does not include the srqidx in the ABORT_RPL/ABORT_REQ_RSS CPL. The final value of rq_start is the one present in TCB with the TF_RX_PDU_OUT bit cleared. So, we need to read the TCB, examine the TF_RX_PDU_OUT (bit 49 of t_flags) in order to determine if there's a rx PDU feedback event pending. Signed-off-by:
-
Raju Rangoju authored
This patch adds the tcb flags and structures needed for querying tcb information. Signed-off-by:
-
- 08 Feb, 2019 20 commits
-
-
Jason Gunthorpe authored
The locking here started out with a single lock that covered everything and then has lately veered into crazy town. The fundamental problem is that several places need to iterate over a linked list, but also need to drop their locks to avoid deadlock during client callbacks. xarray's restartable iteration offers a simple solution to the problem. Once all the lists are xarrays we can drop locks in the places that need that and rely on xarray to provide consistency and locking for the data structure. The resulting simplification is that each of the three lists has a dedicated rwsem that must be held when working with the list it covers. One data structure is no longer covered by multiple locks. The sleeping semaphore is selected because the read side generally needs to be held over something sleeping, and using RCU reader locking in those cases is overkill. In the process this simplifies the entire registration/unregistration flow to be the expected list of setups and the reversed list of matching teardowns, and the registration lock 'refcount' can now be revised to be released after the ULPs are removed, providing a very sane semantic for this feature. Signed-off-by: -
Jason Gunthorpe authored
Now that we have a small ID for each client we can use xarray instead of linearly searching linked lists for client data. This will give much faster and scalable client data lookup, and will lets us revise the locking scheme. Since xarray can store 'going_down' using a mark just entirely eliminate the struct ib_client_data and directly store the client_data value in the xarray. However this does require a special iterator as we must still iterate over any NULL client_data values. Also eliminate the client_data_lock in favour of internal xarray locking. Signed-off-by: -
Jason Gunthorpe authored
This gives each client a unique ID and will let us move client_data to use xarray, and revise the locking scheme. clients have to be add/removed in strict FIFO/LIFO order as they interdepend. To support this the client_ids are assigned to increase in FIFO order. The existing linked list is kept to support reverse iteration until xarray can get a reverse iteration API. Signed-off-by:
Parav Pandit <parav@mellanox.com>
-
Jason Gunthorpe authored
ida is the proper data structure to hold list of clustered small integers and then allocate an unused integer. Get rid of the convoluted and limited open-coded bitmap. Signed-off-by: -
Jason Gunthorpe authored
This really has no purpose anymore, refcount can be used to tell if the device is still registered. Keeping it around just invites mis-use. Signed-off-by:
-
Jason Gunthorpe authored
Instead of complicated logic about when this memory is freed, always free it during device release(). All the cache pointers start out as NULL, so it is safe to call this before the cache is initialized. This makes for a simpler error unwind flow, and a simpler understanding of the lifetime of the memory allocations inside the struct ib_device. Signed-off-by: -
Jason Gunthorpe authored
Since this only frees memory it should be done during the release callback. Otherwise there are possible error flows where it might not get called if registration aborts. Signed-off-by: -
Jason Gunthorpe authored
Since another rename could be running in parallel it is safer to check that the name is not changing inside the lock, where we already know the device name will not change. Fixes: d21943dd ("RDMA/core: Implement IB device rename function") Signed-off-by:
-
Leon Romanovsky authored
The PD allocations in IB/core allows us to simplify drivers and their error flows in their .alloc_pd() paths. The changes in .alloc_pd() go hand in had with relevant update in .dealloc_pd(). We will use this opportunity and convert .dealloc_pd() to don't fail, as it was suggested a long time ago, failures are not happening as we have never seen a WARN_ON print. Signed-off-by:
-
Leon Romanovsky authored
Add new macros to be used in drivers while registering ops structure and IB/core while calling allocation routines, so drivers won't need to perform kzalloc/kfree in their paths. The change in allocation stage allows us to initialize common fields prior to calling to drivers (e.g. restrack). Signed-off-by:
-
Daniel Jurgens authored
When creating many MAD agents in a short period of time, receive packet processing can be delayed long enough to cause timeouts while new agents are being added to the atomic notifier chain with IRQs disabled. Notifier chain registration and unregstration is an O(n) operation. With large numbers of MAD agents being created and destroyed simultaneously the CPUs spend too much time with interrupts disabled. Instead of each MAD agent registering for it's own LSM notification, maintain a list of agents internally and register once, this registration already existed for handling the PKeys. This list is write mostly, so a normal spin lock is used vs a read/write lock. All MAD agents must be checked, so a single list is used instead of breaking them down per device. Notifier calls are done under rcu_read_lock, so there isn't a risk of similar packet timeouts while checking the MAD agents security settings when notified. Signed-off-by:
Daniel Jurgens <danielj@mellanox.com> Reviewed-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Daniel Jurgens authored
Move the security related fields above the u8s to eliminate a hole in the struct. pahole before: struct ib_mad_agent { ... u32 hi_tid; /* 48 4 */ u32 flags; /* 52 4 */ u8 port_num; /* 56 1 */ u8 rmpp_version; /* 57 1 */ /* XXX 6 bytes hole, try to pack */ /* --- cacheline 1 boundary (64 bytes) --- */ void * security; /* 64 8 */ bool smp_allowed; /* 72 1 */ bool lsm_nb_reg; /* 73 1 */ /* XXX 6 bytes hole, try to pack */ struct notifier_block lsm_nb; /* 80 24 */ /* XXX last struct has 4 bytes of padding */ /* size: 104, cachelines: 2, members: 14 */ ... }; pahole after: struct ib_mad_agent { ... u32 hi_tid; /* 48 4 */ u32 flags; /* 52 4 */ void * security; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ struct notifier_block lsm_nb; /* 64 24 */ /* XXX last struct has 4 bytes of padding */ u8 port_num; /* 88 1 */ u8 rmpp_version; /* 89 1 */ bool smp_allowed; /* 90 1 */ bool lsm_nb_reg; /* 91 1 */ /* size: 96, cachelines: 2, members: 14 */ ... }; Signed-off-by: -
Daniel Jurgens authored
If the MAD agents isn't allowed to manage the subnet, or fails to register for the LSM notifier, the security context is leaked. Free the context in these cases. Fixes: 47a2b338 ("IB/core: Enforce security on management datagrams") Signed-off-by:
-
Daniel Jurgens authored
If the notifier runs after the security context is freed an access of freed memory can occur. Fixes: 47a2b338 ("IB/core: Enforce security on management datagrams") Signed-off-by:
-
Parvi Kaustubhi authored
Move the call to usnic_ib_device_remove after usnic_ib_ibdev_list_lock has been released. Signed-off-by:
Parvi Kaustubhi <pkaustub@cisco.com> Signed-off-by:
-
Steve Wise authored
When IPv6 support was added, the correct tos was not passed to cxgb_find_route6(). This potentially results in the wrong route entry. Fixes: 830662f6 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address") Signed-off-by:
-
Steve Wise authored
import_ep() is passed the correct tos, but doesn't use it correctly. Fixes: ac8e4c69 ("cxgb4/iw_cxgb4: TOS support") Signed-off-by:
-
Steve Wise authored
If the parent listening endpoint has a service type set, then use that when setting up the connection. This allows server-side applications to mandate the tos for passive side connections via rdma_set_service_type() on the listening endpoints. Signed-off-by:
-
Steve Wise authored
This allows drivers to know the tos was actively set by the application. Signed-off-by:
-
Steve Wise authored
If a user binds to INADDR_ANY and sets the service id, then the device-specific cm_ids should also use this tos. This allows an app to do: rdma_bind_addr(INADDR_ANY) set_service_type() rdma_listen() And connections setup via this listening endpoint will use the correct tos. Signed-off-by:
-
