- 29 Jul, 2012 2 commits
-
-
NeilBrown authored
commit 58e94ae1 upstream. commit 4367af55 md/raid1: clear bad-block record when write succeeds. Added a 'reschedule_retry' call possibility at the end of end_sync_write, but didn't add matching code at the end of sync_request_write. So if the writes complete very quickly, or scheduling makes it seem that way, then we can miss rescheduling the request and the resync could hang. Also commit 73d5c38a md: avoid races when stopping resync. Fix a race condition in this same code in end_sync_write but didn't make the change in sync_request_write. This patch updates sync_request_write to fix both of those. Patch is suitable for 3.1 and later kernels. Reported-by:
Alexander Lyakas <alex.bolshoy@gmail.com> Original-version-by:
NeilBrown <neilb@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
NeilBrown authored
commit a05b7ea0 upstream. md will refuse to stop an array if any other fd (or mounted fs) is using it. When any fs is unmounted of when the last open fd is closed all pending IO will be flushed (e.g. sync_blockdev call in __blkdev_put) so there will be no pending IO to worry about when the array is stopped. However in order to send the STOP_ARRAY ioctl to stop the array one must first get and open fd on the block device. If some fd is being used to write to the block device and it is closed after mdadm open the block device, but before mdadm issues the STOP_ARRAY ioctl, then there will be no last-close on the md device so __blkdev_put will not call sync_blockdev. If this happens, then IO can still be in-flight while md tears down the array and bad things can happen (use-after-free and subsequent havoc). So in the case where do_md_stop is being called from an open file descriptor, call sync_block after taking the mutex to ensure there will be no new openers. This is needed when setting a read-write device to read-only too. Reported-by:
majianpeng <majianpeng@gmail.com> Signed-off-by:
-
- 19 Jul, 2012 38 commits
-
-
Greg Kroah-Hartman authored
-
Samuel Ortiz authored
commit dbd4fcaf upstream. The netlink commands and attributes, along with the socket structure definitions need to be exported. Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Thomas Gleixner authored
This is a backport of 3e997130 The leap second rework unearthed another issue of inconsistent data. On timekeeping_resume() the timekeeper data is updated, but nothing calls timekeeping_update(), so now the update code in the timer interrupt sees stale values. This has been the case before those changes, but then the timer interrupt was using stale data as well so this went unnoticed for quite some time. Add the missing update call, so all the data is consistent everywhere. Reported-by:
Andreas Schwab <schwab@linux-m68k.org> Reported-and-tested-by:
"Rafael J. Wysocki" <rjw@sisk.pl> Reported-and-tested-by:
Martin Steigerwald <Martin@lichtvoll.de> Cc: John Stultz <johnstul@us.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>, Cc: Prarit Bhargava <prarit@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
John Stultz <johnstul@us.ibm.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
John Stultz authored
This is a backport of 5baefd6d The update of the hrtimer base offsets on all cpus cannot be made atomically from the timekeeper.lock held and interrupt disabled region as smp function calls are not allowed there. clock_was_set(), which enforces the update on all cpus, is called either from preemptible process context in case of do_settimeofday() or from the softirq context when the offset modification happened in the timer interrupt itself due to a leap second. In both cases there is a race window for an hrtimer interrupt between dropping timekeeper lock, enabling interrupts and clock_was_set() issuing the updates. Any interrupt which arrives in that window will see the new time but operate on stale offsets. So we need to make sure that an hrtimer interrupt always sees a consistent state of time and offsets. ktime_get_update_offsets() allows us to get the current monotonic time and update the per cpu hrtimer base offsets from hrtimer_interrupt() to capture a consistent state of monotonic time and the offsets. The function replaces the existing ktime_get() calls in hrtimer_interrupt(). The overhead of the new function vs. ktime_get() is minimal as it just adds two store operations. This ensures that any changes to realtime or boottime offsets are noticed and stored into the per-cpu hrtimer base structures, prior to any hrtimer expiration and guarantees that timers are not expired early. Signed-off-by:
Ingo Molnar <mingo@kernel.org> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by:
Prarit Bhargava <prarit@redhat.com> Link: http://lkml.kernel.org/r/1341960205-56738-8-git-send-email-johnstul@us.ibm.comSigned-off-by:
-
Thomas Gleixner authored
This is a backport of f6c06abf To finally fix the infamous leap second issue and other race windows caused by functions which change the offsets between the various time bases (CLOCK_MONOTONIC, CLOCK_REALTIME and CLOCK_BOOTTIME) we need a function which atomically gets the current monotonic time and updates the offsets of CLOCK_REALTIME and CLOCK_BOOTTIME with minimalistic overhead. The previous patch which provides ktime_t offsets allows us to make this function almost as cheap as ktime_get() which is going to be replaced in hrtimer_interrupt(). Signed-off-by:
-
Thomas Gleixner authored
This is a backport of 196951e9 We need to update the base offsets from this code and we need to do that under base->lock. Move the lock held region around the ktime_get() calls. The ktime_get() calls are going to be replaced with a function which gets the time and the offsets atomically. Signed-off-by:
-
Thomas Gleixner authored
This is a backport of 5b9fe759 We need to update the hrtimer clock offsets from the hrtimer interrupt context. To avoid conversions from timespec to ktime_t maintain a ktime_t based representation of those offsets in the timekeeper. This puts the conversion overhead into the code which updates the underlying offsets and provides fast accessible values in the hrtimer interrupt. Signed-off-by:
-
John Stultz authored
This is a backport of 4873fa07 The timekeeping code misses an update of the hrtimer subsystem after a leap second happened. Due to that timers based on CLOCK_REALTIME are either expiring a second early or late depending on whether a leap second has been inserted or deleted until an operation is initiated which causes that update. Unless the update happens by some other means this discrepancy between the timekeeping and the hrtimer data stays forever and timers are expired either early or late. The reported immediate workaround - $ data -s "`date`" - is causing a call to clock_was_set() which updates the hrtimer data structures. See: http://www.sheeri.com/content/mysql-and-leap-second-high-cpu-and-fix Add the missing clock_was_set() call to update_wall_time() in case of a leap second event. The actual update is deferred to softirq context as the necessary smp function call cannot be invoked from hard interrupt context. Signed-off-by:
Jan Engelhardt <jengelh@inai.de> Reviewed-by:
-
John Stultz authored
This is a backport of f55a6faa clock_was_set() cannot be called from hard interrupt context because it calls on_each_cpu(). For fixing the widely reported leap seconds issue it is necessary to call it from hard interrupt context, i.e. the timer tick code, which does the timekeeping updates. Provide a new function which denotes it in the hrtimer cpu base structure of the cpu on which it is called and raise the hrtimer softirq. We then execute the clock_was_set() notificiation from softirq context in run_hrtimer_softirq(). The hrtimer softirq is rarely used, so polling the flag there is not a performance issue. [ tglx: Made it depend on CONFIG_HIGH_RES_TIMERS. We really should get rid of all this ifdeffery ASAP ] Signed-off-by:
-
Michal Kazior authored
commit f8cdddb8 upstream. Don't validate interface combinations on a stopped interface. Otherwise we might end up being able to create a new interface with a certain type, but won't be able to change an existing interface into that type. This also skips some other functions when interface is stopped and changing interface type. Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> [Fixes regression introduced by cherry pick of 463454b5] Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Pawel Moll authored
commit bf47b4fd upstream. clk_change_rate() is accessing parent's rate without checking if the parent exists at all. In case of root clocks this will cause NULL pointer dereference. This patch follows what clk_calc_new_rates() does in such situation. Signed-off-by:
Pawel Moll <pawel.moll@arm.com> Signed-off-by:
Mike Turquette <mturquette@linaro.org> Signed-off-by:
-
Ryan Bourgeois authored
commit b2e6ad7d upstream. Add support for the 15'' MacBook Pro Retina. The keyboard is the same as recent models. The patch needs to be synchronized with the bcm5974 patch for the trackpad - as usual. Patch originally written by clipcarl (forums.opensuse.org). [rydberg@euromail.se: Amended mouse ignore lines] Signed-off-by:
Ryan Bourgeois <bluedragonx@gmail.com> Signed-off-by:
Henrik Rydberg <rydberg@euromail.se> Acked-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Yuri Khan authored
commit e76b8ee2 upstream. I couldn't find the vendor ID in any of the online databases, but this mat has a Pump It Up logo on the top side of the controller compartment, and a disclaimer stating that Andamiro will not be liable on the bottom. Signed-off-by:
Yuri Khan <yurivkhan@gmail.com> Signed-off-by:
-
Ilia Katsnelson authored
commit cc71a7e8 upstream. Signed-off-by:
Ilia Katsnelson <k0009000@gmail.com> Signed-off-by:
-
Yuri Khan authored
commit 3ffb62cb upstream. The device should be handled by xpad driver instead of generic HID driver. Signed-off-by:
-
Henrik Rydberg authored
commit 3dde22a9 upstream. Add support for the 15'' MacBook Pro Retina model (MacBookPro10,1). Patch originally written by clipcarl (forums.opensuse.org). Signed-off-by:
-
Eric W. Biederman authored
commit a64d49c3 upstream. It was recently reported that moving a bonding device between network namespaces causes warnings from /proc. It turns out after the move we were trying to add and to remove the /proc/net/bonding entries from the wrong network namespace. Move the bonding /proc registration code into the NETDEV_REGISTER and NETDEV_UNREGISTER events where the proc registration and unregistration will always happen at the right time. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric W. Biederman authored
commit 96ca7ffe upstream. The bonding debugfs support has been broken in the presence of network namespaces since it has been added. The debugfs support does not handle multiple bonding devices with the same name in different network namespaces. I haven't had any bug reports, and I'm not interested in getting any. Disable the debugfs support when network namespaces are enabled. Signed-off-by:
-
Deepak Sikri authored
commit 8e839891 upstream. It was observed that during multiple reboots nfs hangs. The status of receive descriptors shows that all the descriptors were in control of CPU, and none were assigned to DMA. Also the DMA status register confirmed that the Rx buffer is unavailable. This patch adds the fix for the same by adding the memory barriers to ascertain that the all instructions before enabling the Rx or Tx DMA are completed which involves the proper setting of the ownership bit in DMA descriptors. Signed-off-by:
Deepak Sikri <deepak.sikri@st.com> Signed-off-by:
-
Eliad Peller authored
commit 10a9109f upstream. If association failed due to internal error (e.g. no supported rates IE), we call ieee80211_destroy_assoc_data() with assoc=true, while we actually reject the association. This results in the BSSID not being zeroed out. After passing assoc=false, we no longer have to call sta_info_destroy_addr() explicitly. While on it, move the "associated" message after the assoc_success check. Signed-off-by:
Eliad Peller <eliad@wizery.com> Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Federico Fuga authored
commit 96342526 upstream. When rpmsg drivers are built into the kernel, they must not initialize before the rpmsg bus does, otherwise they'd trigger a BUG() in drivers/base/driver.c line 169 (driver_register()). To fix that, and to stop depending on arbitrary linkage ordering of those built-in rpmsg drivers, we make the rpmsg bus initialize at subsys_initcall. Signed-off-by:
Federico Fuga <fuga@studiofuga.com> [ohad: rewrite the commit log] Signed-off-by:
Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit b48d9665 upstream. When we remove a key, we put a key index which was supposed to tell the fw that we are actually removing the key. But instead the fw took that index as a valid index and messed up the SRAM of the device. This memory corruption on the device mangled the data of the SCD. The impact on the user is that SCD queue 2 got stuck after having removed keys. Reported-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Stanislaw Gruszka authored
commit c2ca7d92 upstream. This is iwlegacy version of: commit 342bbf3f Author: Johannes Berg <johannes.berg@intel.com> Date: Sun Mar 4 08:50:46 2012 -0800 iwlwifi: always monitor for stuck queues If we only monitor while associated, the following can happen: - we're associated, and the queue stuck check runs, setting the queue "touch" time to X - we disassociate, stopping the monitoring, which leaves the time set to X - almost 2s later, we associate, and enqueue a frame - before the frame is transmitted, we monitor for stuck queues, and find the time set to X, although it is now later than X + 2000ms, so we decide that the queue is stuck and erroneously restart the device Signed-off-by:
-
Tushar Dave authored
commit d0efa8f2 upstream. SYNCH bit and IV bit of RXCW register are sticky. Before examining these bits, RXCW should be read twice to filter out one-time false events and have correct values for these bits. Incorrect values of these bits in link check logic can cause weird link stability issues if auto-negotiation fails. Reported-by:
Dean Nelson <dnelson@redhat.com> Signed-off-by:
Tushar Dave <tushar.n.dave@intel.com> Reviewed-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Stanislaw Gruszka authored
commit efd82118 upstream. On rt2x00_dmastart() we increase index specified by Q_INDEX and on rt2x00_dmadone() we increase index specified by Q_INDEX_DONE. So entries between Q_INDEX_DONE and Q_INDEX are those we currently process in the hardware. Entries between Q_INDEX and Q_INDEX_DONE are those we can submit to the hardware. According to that fix rt2x00usb_kick_queue(), as we need to submit RX entries that are not processed by the hardware. It worked before only for empty queue, otherwise was broken. Note that for TX queues indexes ordering are ok. We need to kick entries that have filled skb, but was not submitted to the hardware, i.e. started from Q_INDEX_DONE and have ENTRY_DATA_PENDING bit set. From practical standpoint this fixes RX queue stall, usually reproducible in AP mode, like for example reported here: https://bugzilla.redhat.com/show_bug.cgi?id=828824Reported-and-tested-by:
Franco Miceli <fmiceli@plan.ceibal.edu.uy> Reported-and-tested-by:
Tom Horsley <horsley1953@gmail.com> Signed-off-by:
-
Anders Kaseorg authored
commit 05d290d6 upstream. If a parent and child process open the two ends of a fifo, and the child immediately exits, the parent may receive a SIGCHLD before its open() returns. In that case, we need to make sure that open() will return successfully after the SIGCHLD handler returns, instead of throwing EINTR or being restarted. Otherwise, the restarted open() would incorrectly wait for a second partner on the other end. The following test demonstrates the EINTR that was wrongly thrown from the parent’s open(). Change .sa_flags = 0 to .sa_flags = SA_RESTART to see a deadlock instead, in which the restarted open() waits for a second reader that will never come. (On my systems, this happens pretty reliably within about 5 to 500 iterations. Others report that it manages to loop ~forever sometimes; YMMV.) #include <sys/stat.h> #include <sys/types.h> #include <sys/wait.h> #include <fcntl.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #define CHECK(x) do if ((x) == -1) {perror(#x); abort();} while(0) void handler(int signum) {} int main() { struct sigaction act = {.sa_handler = handler, .sa_flags = 0}; CHECK(sigaction(SIGCHLD, &act, NULL)); CHECK(mknod("fifo", S_IFIFO | S_IRWXU, 0)); for (;;) { int fd; pid_t pid; putc('.', stderr); CHECK(pid = fork()); if (pid == 0) { CHECK(fd = open("fifo", O_RDONLY)); _exit(0); } CHECK(fd = open("fifo", O_WRONLY)); CHECK(close(fd)); CHECK(waitpid(pid, NULL, 0)); } } This is what I suspect was causing the Git test suite to fail in t9010-svn-fe.sh: http://bugs.debian.org/678852Signed-off-by:
Anders Kaseorg <andersk@mit.edu> Reviewed-by:
Jonathan Nieder <jrnieder@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit 88ca518b upstream. intel_ips driver spews the warning message "ME failed to update for more than 1s, likely hung" at each second endlessly on HP ProBook laptops with IronLake. As this has never worked, better to blacklist the driver for now. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Matthew Garrett <mjg@redhat.com> Signed-off-by:
-
Peter Zijlstra authored
commit 5167e8d5 upstream. Thanks to Charles Wang for spotting the defects in the current code: - If we go idle during the sample window -- after sampling, we get a negative bias because we can negate our own sample. - If we wake up during the sample window we get a positive bias because we push the sample to a known active period. So rewrite the entire nohz load-avg muck once again, now adding copious documentation to the code. Reported-and-tested-by:
Doug Smythies <dsmythies@telus.net> Reported-and-tested-by:
Charles Wang <muming.wq@gmail.com> Signed-off-by:
-
Thomas Renninger authored
commit c4686c71 upstream. Commit d640113f introduced a regression on SMP systems where the processor core with ACPI id zero is disabled (typically should be the case because of hyperthreading). The regression got spread through stable kernels. On 3.0.X it got introduced via 3.0.18. Such platforms may be rare, but do exist. Look out for a disabled processor with acpi_id 0 in dmesg: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] disabled) This problem has been observed on a: HP Proliant BL280c G6 blade This patch restricts the introduced workaround to platforms with nr_cpu_ids <= 1. Signed-off-by:
Thomas Renninger <trenn@suse.de> Signed-off-by:
-
Bob Moore authored
commit 46befd6b upstream. Fixes a problem that can occur when a lone package object is wrapped with an outer package object in order to conform to the ACPI specification. Can affect these predefined names: _ALR,_MLS,_PSS,_TRT,_TSS,_PRT,_HPX,_DLM,_CSD,_PSD,_TSD https://bugzilla.kernel.org/show_bug.cgi?id=44171 This problem was introduced in 3.4-rc1 by commit 6a99b1c9 (ACPICA: Object repair code: Support to add Package wrappers) Reported-by:
Vlastimil Babka <caster@gentoo.org> Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lin Ming <ming.m.lin@intel.com> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Todd Poynor authored
commit 8265981b upstream. Checking for adc->ts_pend already claimed should be done with the lock held. Signed-off-by:
Todd Poynor <toddpoynor@google.com> Acked-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
-
NeilBrown authored
commit 2d4f4f33 upstream. This bug has been present ever since data-check was introduce in 2.6.16. However it would only fire if a data-check were done on a degraded array, which was only possible if the array has 3 or more devices. This is certainly possible, but is quite uncommon. Since hot-replace was added in 3.3 it can happen more often as the same condition can arise if not all possible replacements are present. The problem is that as soon as we submit the last read request, the 'r1_bio' structure could be freed at any time, so we really should stop looking at it. If the last device is being read from we will stop looking at it. However if the last device is not due to be read from, we will still check the bio pointer in the r1_bio, but the r1_bio might already be free. So use the read_targets counter to make sure we stop looking for bios to submit as soon as we have submitted them all. This fix is suitable for any -stable kernel since 2.6.16. Reported-by:
Arnold Schulz <arnysch@gmx.net> Signed-off-by:
-
Herton Ronaldo Krzesinski authored
commit 596fd462 upstream. We don't need to open code the divide function, just use div_u64 that already exists and do the same job. While this is a straightforward clean up, there is more to that, the real motivation for this. While building on a cross compiling environment in armel, using gcc 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5), I was getting the following build error: ERROR: "__aeabi_uldivmod" [drivers/mtd/nand/nandsim.ko] undefined! After investigating with objdump and hand built assembly version generated with the compiler, I narrowed __aeabi_uldivmod as being generated from the divide function. When nandsim.c is built with -fno-inline-functions-called-once, that happens when CONFIG_DEBUG_SECTION_MISMATCH is enabled, the do_div optimization in arch/arm/include/asm/div64.h doesn't work as expected with the open coded divide function: even if the do_div we are using doesn't have a constant divisor, the compiler still includes the else parts of the optimized do_div macro, and translates the divisions there to use __aeabi_uldivmod, instead of only calling __do_div_asm -> __do_div64 and optimizing/removing everything else out. So to reproduce, gcc 4.6 plus CONFIG_DEBUG_SECTION_MISMATCH=y and CONFIG_MTD_NAND_NANDSIM=m should do it, building on armel. After this change, the compiler does the intended thing even with -fno-inline-functions-called-once, and optimizes out as expected the constant handling in the optimized do_div on arm. As this also avoids a build issue, I'm marking for Stable, as I think is applicable for this case. Signed-off-by:
Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Acked-by:
Nicolas Pitre <nico@linaro.org> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Santosh Nayak authored
commit 82163edc upstream. There is a missing "up_write()" here. Semaphore should be released before returning error value. Signed-off-by:
Santosh Nayak <santoshprasadnayak@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
Jeff Moyer authored
commit 91f68c89 upstream. Commit 080399aa ("block: don't mark buffers beyond end of disk as mapped") exposed a bug in __getblk_slow that causes mount to hang as it loops infinitely waiting for a buffer that lies beyond the end of the disk to become uptodate. The problem was initially reported by Torsten Hilbrich here: https://lkml.org/lkml/2012/6/18/54 and also reported independently here: http://www.sysresccd.org/forums/viewtopic.php?f=13&t=4511 and then Richard W.M. Jones and Marcos Mello noted a few separate bugzillas also associated with the same issue. This patch has been confirmed to fix: https://bugzilla.redhat.com/show_bug.cgi?id=835019 The main problem is here, in __getblk_slow: for (;;) { struct buffer_head * bh; int ret; bh = __find_get_block(bdev, block, size); if (bh) return bh; ret = grow_buffers(bdev, block, size); if (ret < 0) return NULL; if (ret == 0) free_more_memory(); } __find_get_block does not find the block, since it will not be marked as mapped, and so grow_buffers is called to fill in the buffers for the associated page. I believe the for (;;) loop is there primarily to retry in the case of memory pressure keeping grow_buffers from succeeding. However, we also continue to loop for other cases, like the block lying beond the end of the disk. So, the fix I came up with is to only loop when grow_buffers fails due to memory allocation issues (return value of 0). The attached patch was tested by myself, Torsten, and Rich, and was found to resolve the problem in call cases. Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Reported-and-Tested-by:
Torsten Hilbrich <torsten.hilbrich@secunet.com> Tested-by:
Richard W.M. Jones <rjones@redhat.com> Reviewed-by:
Josh Boyer <jwboyer@redhat.com> [ Jens is on vacation, taking this directly - Linus ] Signed-off-by:
-
Jean Delvare authored
commit 41002f8d upstream. We were accidentally losing one bit in the configuration register on device initialization. It was reported to freeze one specific system right away. Properly preserve all bits we don't explicitly want to change in order to prevent that. Reported-by:
Stevie Trujillo <stevie.trujillo@gmail.com> Signed-off-by:
Jean Delvare <khali@linux-fr.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
David Dillow authored
commit a7deca6f upstream. Commit 7a6f6c29 (cx231xx: use URB_NO_TRANSFER_DMA_MAP) was intended to avoid mapping the DMA buffer for URB twice. This works for the URBs allocated with usb_alloc_urb(), as those are allocated from cohernent DMA pools, but the flag was also added for the VBI and audio URBs, which have a manually allocated area. This leaves the random trash in the structure after allocation as the DMA address, corrupting memory and preventing VBI and audio from working. Letting the USB core map the buffers solves the problem. Signed-off-by:
David Dillow <dave@thedillows.org> Cc: Sri Deevi <srinivasa.deevi@conexant.com> Signed-off-by:
-
Dave Jones authored
commit 8d657eb3 upstream. This can be trivially triggered from userspace by passing in something unexpected. kernel BUG at fs/locks.c:1468! invalid opcode: 0000 [#1] SMP RIP: 0010:generic_setlease+0xc2/0x100 Call Trace: __vfs_setlease+0x35/0x40 fcntl_setlease+0x76/0x150 sys_fcntl+0x1c6/0x810 system_call_fastpath+0x1a/0x1f Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
