Otherwise we end up with attempting to send packets from down devices
or to send oversized packets, which may cause unexpected driver/device
behaviour. Generic XDP has already done this check, so reuse the logic
in native XDP.

Fixes: 814abfab ("xdp: add bpf_redirect helper function")
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

John Fastabend says:

====================
First three patches resolve issues found while testing sockhash and
reviewing code. Syzbot also found them about the same time as I was
working on fixes. The main issue is in the sockhash path we reduced
the scope of sk_callback lock but this meant we could get update and
close running in parallel so fix that here.

Then testing sk_msg and sk_skb programs together found that skb->dev
is not always assigned and some of the helpers were depending on this
to lookup max mtu. Fix this by using SKB_MAX_ALLOC when no MTU is
available.

Finally, Martin spotted that the sockmap code was still using the
qdisc skb cb structure. But I was sure we had fixed this long ago.
Looks like we missed it in a merge conflict resolution and then by
chance data_end offset was the same in both structures so everything
sort of continued to work even though it could break at any moment
if the structs ever change. So redo the conversion and this time
also convert the helpers.

v2: fix '0 files changed' issue in patches
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

In commit

  'bpf: bpf_compute_data uses incorrect cb structure' (8108a775)

we added the routine bpf_compute_data_end_sk_skb() to compute the
correct data_end values, but this has since been lost. In kernel
v4.14 this was correct and the above patch was applied in it
entirety. Then when v4.14 was merged into v4.15-rc1 net-next tree
we lost the piece that renamed bpf_compute_data_pointers to the
new function bpf_compute_data_end_sk_skb. This was done here,

e1ea2f98 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net")

When it conflicted with the following rename patch,

6aaae2b6 ("bpf: rename bpf_compute_data_end into bpf_compute_data_pointers")

Finally, after a refactor I thought even the function
bpf_compute_data_end_sk_skb() was no longer needed and it was
erroneously removed.

However, we never reverted the sk_skb_convert_ctx_access() usage of
tcp_skb_cb which had been committed and survived the merge conflict.
Here we fix this by adding back the helper and *_data_end_sk_skb()
usage. Using the bpf_skc_data_end mapping is not correct because it
expects a qdisc_skb_cb object but at the sock layer this is not the
case. Even though it happens to work here because we don't overwrite
any data in-use at the socket layer and the cb structure is cleared
later this has potential to create some subtle issues. But, even
more concretely the filter.c access check uses tcp_skb_cb.

And by some act of chance though,

struct bpf_skb_data_end {
        struct qdisc_skb_cb        qdisc_cb;             /*     0    28 */

        /* XXX 4 bytes hole, try to pack */

        void *                     data_meta;            /*    32     8 */
        void *                     data_end;             /*    40     8 */

        /* size: 48, cachelines: 1, members: 3 */
        /* sum members: 44, holes: 1, sum holes: 4 */
        /* last cacheline: 48 bytes */
};

and then tcp_skb_cb,

struct tcp_skb_cb {
	[...]
                struct {
                        __u32      flags;                /*    24     4 */
                        struct sock * sk_redir;          /*    32     8 */
                        void *     data_end;             /*    40     8 */
                } bpf;                                   /*          24 */
        };

So when we use offset_of() to track down the byte offset we get 40 in
either case and everything continues to work. Fix this mess and use
correct structures its unclear how long this might actually work for
until someone moves the structs around.
Reported-by: Martin KaFai Lau <kafai@fb.com>
Fixes: e1ea2f98 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net")
Fixes: 6aaae2b6 ("bpf: rename bpf_compute_data_end into bpf_compute_data_pointers")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Currently, when a sock is closed and the bpf_tcp_close() callback is
used we remove memory but do not free the skb. Call consume_skb() if
the skb is attached to the buffer.

Reported-by: syzbot+d464d2c20c717ef5a6a8@syzkaller.appspotmail.com
Fixes: 1aa12bdf ("bpf: sockmap, add sock close() hook to remove socks")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

After latest lock updates there is no longer anything preventing a
close and recvmsg call running in parallel. Additionally, we can
race update with close if we close a socket and simultaneously update
if via the BPF userspace API (note the cgroup ops are already run
with sock_lock held).

To resolve this take sock_lock in close and update paths.

Reported-by: syzbot+b680e42077a0d7c9a0c4@syzkaller.appspotmail.com
Fixes: e9db4ef6 ("bpf: sockhash fix omitted bucket lock in sock_close")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Multiple BPF helpers in use by sk_skb programs calculate the max
skb length using the __bpf_skb_max_len function. However, this
calculates the max length using the skb->dev pointer which can be
NULL when an sk_skb program is paired with an sk_msg program.

To force this a sk_msg program needs to redirect into the ingress
path of a sock with an attach sk_skb program. Then the the sk_skb
program would need to call one of the helpers that adjust the skb
size.

To fix the null ptr dereference use SKB_MAX_ALLOC size if no dev
is available.

Fixes: 8934ce2f ("bpf: sockmap redirect ingress support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

John Fastabend says:

====================
I missed fixing the error path in the sockhash code to align with
supporting socks in multiple maps. Simply checking if the psock is
present does not mean we can decrement the reference count because
it could be part of another map. Fix this by cleaning up the error
path so this situation does not happen.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This removes locking from readers of RCU hash table. Its not
necessary.

Fixes: 81110384 ("bpf: sockmap, add hash map support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The current code, in the error path of sock_hash_ctx_update_elem,
checks if the sock has a psock in the user data and if so decrements
the reference count of the psock. However, if the error happens early
in the error path we may have never incremented the psock reference
count and if the psock exists because the sock is in another map then
we may inadvertently decrement the reference count.

Fix this by making the error path only call smap_release_sock if the
error happens after the increment.

Reported-by: syzbot+d464d2c20c717ef5a6a8@syzkaller.appspotmail.com
Fixes: 81110384 ("bpf: sockmap, add hash map support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

For untracked executables of samples/bpf, add this.

  Untracked files:
    (use "git add <file>..." to include in what will be committed)

  	samples/bpf/cpustat
  	samples/bpf/fds_example
  	samples/bpf/lathist
  	samples/bpf/load_sock_ops
	...
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

test_task_rename() and test_urandom_read()
can be failed during write() and read(),
So check the result of them.
Reviewed-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

To avoid the below build warning message,
use new generate_load() checking the return value.

  ignoring return value of ‘system’, declared with attribute warn_unused_result

And it also refactors the duplicate code of both
test_perf_event_all_cpu() and test_perf_event_task()

Cc: Teng Qin <qinteng@fb.com>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This fixes build error regarding redefinition:

    CLANG-bpf  samples/bpf/parse_varlen.o
  samples/bpf/parse_varlen.c:111:8: error: redefinition of 'vlan_hdr'
  struct vlan_hdr {
         ^
  ./include/linux/if_vlan.h:38:8: note: previous definition is here

So remove duplicate 'struct vlan_hdr' in sample code and include if_vlan.h
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Decrement the number of elements in the map in case the allocation
of a new node fails.

Fixes: 6c905981 ("bpf: pre-allocate hash map elements")
Signed-off-by: Mauricio Vasquez B <mauricio.vasquez@polito.it>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Magnus Karlsson says:

====================
This patch set fixes three bugs in the SKB TX path of AF_XDP.
Details in the individual commits.

The structure of the patch set is as follows:

Patch 1: Fix for lost completion message
Patch 2-3: Fix for possible multiple completions of single packet
Patch 4: Fix potential race during error

Changes from v1:

* Added explanation of race in commit message of patch 4.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

There is a potential race in the TX completion code for the SKB
case. One process enters the sendmsg code of an AF_XDP socket in order
to send a frame. The execution eventually trickles down to the driver
that is told to send the packet. However, it decides to drop the
packet due to some error condition (e.g., rings full) and frees the
SKB. This will trigger the SKB destructor and a completion will be
sent to the AF_XDP user space through its
single-producer/single-consumer queues.

At the same time a TX interrupt has fired on another core and it
dispatches the TX completion code in the driver. It does its HW
specific things and ends up freeing the SKB associated with the
transmitted packet. This will trigger the SKB destructor and a
completion will be sent to the AF_XDP user space through its
single-producer/single-consumer queues. With a pseudo call stack, it
would look like this:

Core 1:
sendmsg() being called in the application
  netdev_start_xmit()
    Driver entered through ndo_start_xmit
      Driver decides to free the SKB for some reason (e.g., rings full)
        Destructor of SKB called
          xskq_produce_addr() is called to signal completion to user space

Core 2:
TX completion irq
  NAPI loop
    Driver irq handler for TX completions
      Frees the SKB
        Destructor of SKB called
          xskq_produce_addr() is called to signal completion to user space

We now have a violation of the single-producer/single-consumer
principle for our queues as there are two threads trying to produce at
the same time on the same queue.

Fixed by introducing a spin_lock in the destructor. In regards to the
performance, I get around 1.74 Mpps for txonly before and after the
introduction of the spinlock. There is of course some impact due to
the spin lock but it is in the less significant digits that are too
noisy for me to measure. But let us say that the version without the
spin lock got 1.745 Mpps in the best case and the version with 1.735
Mpps in the worst case, then that would mean a maximum drop in
performance of 0.5%.

Fixes: 35fcde7f ("xsk: support for Tx")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Sendmsg in the SKB path of AF_XDP can now return EBUSY when a packet
was discarded and completed by the driver. Just ignore this message
in the sample application.

Fixes: b4b8faa1 ("samples/bpf: sample application and documentation for AF_XDP sockets")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reported-by: Pavel Odintsov <pavel@fastnetmon.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Fixed a bug in which a frame could be completed more than once
when an error was returned from dev_direct_xmit(). The code
erroneously retried sending the message leading to multiple
calls to the SKB destructor and therefore multiple completions
of the same buffer to user space.

The error code in this case has been changed from EAGAIN to EBUSY
in order to tell user space that the sending of the packet failed
and the buffer has been return to user space through the completion
queue.

Fixes: 35fcde7f ("xsk: support for Tx")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reported-by: Pavel Odintsov <pavel@fastnetmon.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The code in xskq_produce_addr erroneously checked if there
was up to LAZY_UPDATE_THRESHOLD amount of space in the completion
queue. It only needs to check if there is one slot left in the
queue. This bug could under some circumstances lead to a WARN_ON_ONCE
being triggered and the completion message to user space being lost.

Fixes: 35fcde7f ("xsk: support for Tx")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reported-by: Pavel Odintsov <pavel@fastnetmon.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Pull MD fixes from Shaohua Li:
 "Two small fixes for MD:

   - an error handling fix from me

   - a recover bug fix for raid10 from BingJing"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  md/raid10: fix that replacement cannot complete recovery after reassemble
  MD: cleanup resources in failure

Pull OpenRISC fixes from Stafford Horne:
 "Two fixes for issues which were breaking OpenRISC boot:

   - Fix bug in __pte_free_tlb() exposed in 4.18 by Matthew Wilcox's
     page table flag addition.

   - Fix issue booting on real hardware if delay slot detection
     emulation is disabled"

* tag 'for-linus' of git://github.com/stffrdhrn/linux:
  openrisc: entry: Fix delay slot exception detection
  openrisc: Call destructor during __pte_free_tlb

Pull networking fixes from David Miller:

 1) Verify netlink attributes properly in nf_queue, from Eric Dumazet.

 2) Need to bump memory lock rlimit for test_sockmap bpf test, from
    Yonghong Song.

 3) Fix VLAN handling in lan78xx driver, from Dave Stevenson.

 4) Fix uninitialized read in nf_log, from Jann Horn.

 5) Fix raw command length parsing in mlx5, from Alex Vesker.

 6) Cleanup loopback RDS connections upon netns deletion, from Sowmini
    Varadhan.

 7) Fix regressions in FIB rule matching during create, from Jason A.
    Donenfeld and Roopa Prabhu.

 8) Fix mpls ether type detection in nfp, from Pieter Jansen van Vuuren.

 9) More bpfilter build fixes/adjustments from Masahiro Yamada.

10) Fix XDP_{TX,REDIRECT} flushing in various drivers, from Jesper
    Dangaard Brouer.

11) fib_tests.sh file permissions were broken, from Shuah Khan.

12) Make sure BH/preemption is disabled in data path of mac80211, from
    Denis Kenzior.

13) Don't ignore nla_parse_nested() return values in nl80211, from
    Johannes berg.

14) Properly account sock objects ot kmemcg, from Shakeel Butt.

15) Adjustments to setting bpf program permissions to read-only, from
    Daniel Borkmann.

16) TCP Fast Open key endianness was broken, it always took on the host
    endiannness. Whoops. Explicitly make it little endian. From Yuching
    Cheng.

17) Fix prefix route setting for link local addresses in ipv6, from
    David Ahern.

18) Potential Spectre v1 in zatm driver, from Gustavo A. R. Silva.

19) Various bpf sockmap fixes, from John Fastabend.

20) Use after free for GRO with ESP, from Sabrina Dubroca.

21) Passing bogus flags to crypto_alloc_shash() in ipv6 SR code, from
    Eric Biggers.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits)
  qede: Adverstise software timestamp caps when PHC is not available.
  qed: Fix use of incorrect size in memcpy call.
  qed: Fix setting of incorrect eswitch mode.
  qed: Limit msix vectors in kdump kernel to the minimum required count.
  ipvlan: call dev_change_flags when ipvlan mode is reset
  ipv6: sr: fix passing wrong flags to crypto_alloc_shash()
  net: fix use-after-free in GRO with ESP
  tcp: prevent bogus FRTO undos with non-SACK flows
  bpf: sockhash, add release routine
  bpf: sockhash fix omitted bucket lock in sock_close
  bpf: sockmap, fix smap_list_map_remove when psock is in many maps
  bpf: sockmap, fix crash when ipv6 sock is added
  net: fib_rules: bring back rule_exists to match rule during add
  hv_netvsc: split sub-channel setup into async and sync
  net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN
  atm: zatm: Fix potential Spectre v1
  s390/qeth: consistently re-enable device features
  s390/qeth: don't clobber buffer on async TX completion
  s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6]
  s390/qeth: fix race when setting MAC address
  ...

Sudarsana Reddy Kalluru says:

====================
qed*: Fix series.

The patch series addresses few issues in the qed* drivers.

Please consider applying it to 'net' branch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When ptp clock is not available for a PF (e.g., higher PFs in NPAR mode),
get-tsinfo() callback should return the software timestamp capabilities
instead of returning the error.

Fixes: 4c55215c ("qede: Add driver support for PTP")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the correct size value while copying chassis/port id values.

Fixes: 6ad8c632 ("qed: Add support for query/config dcbx.")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

By default, driver sets the eswitch mode incorrectly as VEB (virtual
Ethernet bridging).
Need to set VEB eswitch mode only when sriov is enabled, and it should be
to set NONE by default. The patch incorporates this change.

Fixes: 0fefbfba ("qed*: Management firmware - notifications and defaults")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Memory size is limited in the kdump kernel environment. Allocation of more
msix-vectors (or queues) consumes few tens of MBs of memory, which might
lead to the kdump kernel failure.
This patch adds changes to limit the number of MSI-X vectors in kdump
kernel to minimum required value (i.e., 2 per engine).

Fixes: fe56b9e6 ("qed: Add module with basic common support")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After we change the ipvlan mode from l3 to l2, or vice versa, we only
reset IFF_NOARP flag, but don't flush the ARP table cache, which will
cause eth->h_dest to be equal to eth->h_source in ipvlan_xmit_mode_l2().
Then the message will not come out of host.

Here is the reproducer on local host:

ip link set eth1 up
ip addr add 192.168.1.1/24 dev eth1
ip link add link eth1 ipvlan1 type ipvlan mode l3

ip netns add net1
ip link set ipvlan1 netns net1
ip netns exec net1 ip link set ipvlan1 up
ip netns exec net1 ip addr add 192.168.2.1/24 dev ipvlan1

ip route add 192.168.2.0/24 via 192.168.1.2
ping 192.168.2.2 -c 2

ip netns exec net1 ip link set ipvlan1 type ipvlan mode l2
ping 192.168.2.2 -c 2

Add the same configuration on remote host. After we set the mode to l2,
we could find that the src/dst MAC addresses are the same on eth1:

21:26:06.648565 00:b7:13:ad:d3:05 > 00:b7:13:ad:d3:05, ethertype IPv4 (0x0800), length 98: (tos 0x0, ttl 64, id 58356, offset 0, flags [DF], proto ICMP (1), length 84)
    192.168.2.1 > 192.168.2.2: ICMP echo request, id 22686, seq 1, length 64

Fix this by calling dev_change_flags(), which will call netdevice notifier
with flag change info.

v2:
a) As pointed out by Wang Cong, check return value for dev_change_flags() when
change dev flags.
b) As suggested by Stefano and Sabrina, move flags setting before l3mdev_ops.
So we don't need to redo ipvlan_{, un}register_nf_hook() again in err path.
Reported-by: Jianlin Shi <jishi@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 'mask' argument to crypto_alloc_shash() uses the CRYPTO_ALG_* flags,
not 'gfp_t'.  So don't pass GFP_KERNEL to it.

Fixes: bf355b8d ("ipv6: sr: add core files for SR HMAC support")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the addition of GRO for ESP, gro_receive can consume the skb and
return -EINPROGRESS. In that case, the lower layer GRO handler cannot
touch the skb anymore.

Commit 5f114163 ("net: Add a skb_gro_flush_final helper.") converted
some of the gro_receive handlers that can lead to ESP's gro_receive so
that they wouldn't access the skb when -EINPROGRESS is returned, but
missed other spots, mainly in tunneling protocols.

This patch finishes the conversion to using skb_gro_flush_final(), and
adds a new helper, skb_gro_flush_final_remcsum(), used in VXLAN and
GUE.

Fixes: 5f114163 ("net: Add a skb_gro_flush_final helper.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull btrfs fixes from David Sterba:
 "We have a few regression fixes for qgroup rescan status tracking and
  the vm_fault_t conversion that mixed up the error values"

* tag 'for-4.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix mount failure when qgroup rescan is in progress
  Btrfs: fix regression in btrfs_page_mkwrite() from vm_fault_t conversion
  btrfs: quota: Set rescan progress to (u64)-1 if we hit last leaf

Pull vfs fix from Al Viro:
 "Followup to procfs-seq_file series this window"

This fixes a memory leak by making sure that proc seq files release any
private data on close.  The 'proc_seq_open' has to be properly paired
with 'proc_seq_release' that releases the extra private data.

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  proc: add proc_seq_release

Pull staging/IIO fixes from Greg KH:
 "Here are a few small staging and IIO driver fixes for 4.18-rc3.

  Nothing major or big, all just fixes for reported problems since
  4.18-rc1. All of these have been in linux-next this week with no
  reported problems"

* tag 'staging-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: android: ion: Return an ERR_PTR in ion_map_kernel
  staging: comedi: quatech_daqp_cs: fix no-op loop daqp_ao_insn_write()
  iio: imu: inv_mpu6050: Fix probe() failure on older ACPI based machines
  iio: buffer: fix the function signature to match implementation
  iio: mma8452: Fix ignoring MMA8452_INT_DRDY
  iio: tsl2x7x/tsl2772: avoid potential division by zero
  iio: pressure: bmp280: fix relative humidity unit

Pull tty/serial fixes from Greg KH:
 "Here are five fixes for the tty core and some serial drivers.

  The tty core ones fix some security and other issues reported by the
  syzbot that I have taken too long in responding to (sorry Tetsuo!).

  The 8350 serial driver fix resolves an issue of devices that used to
  work properly stopping working as they shouldn't have been added to a
  blacklist.

  All of these have been in linux-next for a few days with no reported
  issues"

* tag 'tty-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt: prevent leaking uninitialized data to userspace via /dev/vcs*
  serdev: fix memleak on module unload
  serial: 8250_pci: Remove stalled entries in blacklist
  n_tty: Access echo_* variables carefully.
  n_tty: Fix stall at n_tty_receive_char_special().

Pull USB fixes from Greg KH:
 "Here is a number of USB gadget and other driver fixes for 4.18-rc3.

  There's a bunch of them here, most of them being gadget driver and
  xhci host controller fixes for reported issues (as normal), but there
  are also some new device ids, and some fixes for the typec code.

  There is an acpi core patch in here that was acked by the acpi
  maintainer as it is needed for the typec fixes in order to properly
  solve a problem in that driver.

  All of these have been in linux-next this week with no reported
  issues"

* tag 'usb-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
  usb: chipidea: host: fix disconnection detect issue
  usb: typec: tcpm: fix logbuffer index is wrong if _tcpm_log is re-entered
  typec: tcpm: Fix a msecs vs jiffies bug
  NFC: pn533: Fix wrong GFP flag usage
  usb: cdc_acm: Add quirk for Uniden UBC125 scanner
  staging/typec: fix tcpci_rt1711h build errors
  usb: typec: ucsi: Fix for incorrect status data issue
  usb: typec: ucsi: acpi: Workaround for cache mode issue
  acpi: Add helper for deactivating memory region
  usb: xhci: increase CRS timeout value
  usb: xhci: tegra: fix runtime PM error handling
  usb: xhci: remove the code build warning
  xhci: Fix kernel oops in trace_xhci_free_virt_device
  xhci: Fix perceived dead host due to runtime suspend race with event handler
  dwc2: gadget: Fix ISOC IN DDMA PID bitfield value calculation
  usb: gadget: dwc2: fix memory leak in gadget_init()
  usb: gadget: composite: fix delayed_status race condition when set_interface
  usb: dwc2: fix isoc split in transfer with no data
  usb: dwc2: alloc dma aligned buffer for isoc split in
  usb: dwc2: fix the incorrect bitmaps for the ports of multi_tt hub
  ...

Pull dma mapping fixlet from Christoph Hellwig:
 "Add a missing export required by riscv and unicore"

* tag 'dma-mapping-4.18-2' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: export swiotlb_dma_ops

If SACK is not enabled and the first cumulative ACK after the RTO
retransmission covers more than the retransmitted skb, a spurious
FRTO undo will trigger (assuming FRTO is enabled for that RTO).
The reason is that any non-retransmitted segment acknowledged will
set FLAG_ORIG_SACK_ACKED in tcp_clean_rtx_queue even if there is
no indication that it would have been delivered for real (the
scoreboard is not kept with TCPCB_SACKED_ACKED bits in the non-SACK
case so the check for that bit won't help like it does with SACK).
Having FLAG_ORIG_SACK_ACKED set results in the spurious FRTO undo
in tcp_process_loss.

We need to use more strict condition for non-SACK case and check
that none of the cumulatively ACKed segments were retransmitted
to prove that progress is due to original transmissions. Only then
keep FLAG_ORIG_SACK_ACKED set, allowing FRTO undo to proceed in
non-SACK case.

(FLAG_ORIG_SACK_ACKED is planned to be renamed to FLAG_ORIG_PROGRESS
to better indicate its purpose but to keep this change minimal, it
will be done in another patch).

Besides burstiness and congestion control violations, this problem
can result in RTO loop: When the loss recovery is prematurely
undoed, only new data will be transmitted (if available) and
the next retransmission can occur only after a new RTO which in case
of multiple losses (that are not for consecutive packets) requires
one RTO per loss to recover.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Tested-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Originally in patch e6d20c55 ("openrisc: entry: Fix delay slot
detection") I fixed delay slot detection, but only for QEMU.  We missed
that hardware delay slot detection using delay slot exception flag (DSX)
was still broken.  This was because QEMU set the DSX flag in both
pre-exception supervision register (ESR) and supervision register (SR)
register, but on real hardware the DSX flag is only set on the SR
register during exceptions.

Fix this by carrying the DSX flag into the SR register during exception.
We also update the DSX flag read locations to read the value from the SR
register not the pt_regs SR register which represents ESR.  The ESR
should never have the DSX flag set.

In the process I updated/removed a few comments to match the current
state.  Including removing a comment saying that the DSX detection logic
was inefficient and needed to be rewritten.

I have tested this on QEMU with a patch ensuring it matches the hardware
specification.

Link: https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg00000.html
Fixes: e6d20c55 ("openrisc: entry: Fix delay slot detection")
Signed-off-by: Stafford Horne <shorne@gmail.com>

Daniel Borkmann says:

====================
pull-request: bpf 2018-07-01

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) A bpf_fib_lookup() helper fix to change the API before freeze to
   return an encoding of the FIB lookup result and return the nexthop
   device index in the params struct (instead of device index as return
   code that we had before), from David.

2) Various BPF JIT fixes to address syzkaller fallout, that is, do not
   reject progs when set_memory_*() fails since it could still be RO.
   Also arm32 JIT was not using bpf_jit_binary_lock_ro() API which was
   an issue, and a memory leak in s390 JIT found during review, from
   Daniel.

3) Multiple fixes for sockmap/hash to address most of the syzkaller
   triggered bugs. Usage with IPv6 was crashing, a GPF in bpf_tcp_close(),
   a missing sock_map_release() routine to hook up to callbacks, and a
   fix for an omitted bucket lock in sock_close(), from John.

4) Two bpftool fixes to remove duplicated error message on program load,
   and another one to close the libbpf object after program load. One
   additional fix for nfp driver's BPF offload to avoid stopping offload
   completely if replace of program failed, from Jakub.

5) Couple of BPF selftest fixes that bail out in some of the test
   scripts if the user does not have the right privileges, from Jeffrin.

6) Fixes in test_bpf for s390 when CONFIG_BPF_JIT_ALWAYS_ON is set
   where we need to set the flag that some of the test cases are expected
   to fail, from Kleber.

7) Fix to detangle BPF_LIRC_MODE2 dependency from CONFIG_CGROUP_BPF
   since it has no relation to it and lirc2 users often have configs
   without cgroups enabled and thus would not be able to use it, from Sean.

8) Fix a selftest failure in sockmap by removing a useless setrlimit()
   call that would set a too low limit where at the same time we are
   already including bpf_rlimit.h that does the job, from Yonghong.

9) Fix BPF selftest config with missing missing NET_SCHED, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>