- 25 Aug, 2022 16 commits
-
-
Luke D. Jones authored
The panel_od attribute was not documented, this adds the required documentation. Fixes: ca91ea34 ("asus-wmi: Add panel overdrive functionality") Signed-off-by:
Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20220812222509.292692-4-luke@ljones.devReviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Luke D. Jones authored
The egpu_enable attribute was not documented, this adds the required documentation. Fixes: 382b91db ("asus-wmi: Add egpu enable method") Signed-off-by:
-
Luke D. Jones authored
The dgpu_disable attribute was not documented, this adds the required documentation. Fixes: 98829e84 ("asus-wmi: Add dgpu disable method") Signed-off-by:
-
ye xingchen authored
Use kobj_to_dev() instead of open-coding it. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
ye xingchen <ye.xingchen@zte.com.cn> Link: https://lore.kernel.org/r/20220811013203.16010-1-ye.xingchen@zte.com.cnReviewed-by:
-
Luke D. Jones authored
This changes all *_show attributes in asus-wmi.c to use sysfs_emit() instead of the older method of writing to the output buffer manually. Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220809025054.1626339-6-luke@ljones.devSigned-off-by:
-
Maximilian Luz authored
Add software nodes for the HID sensor collection and the UCM UCSI HID client to the Surface Pro 8. In contrast to the type-cover devices, these devices are directly attached to the SAM controller, without any hub. This enables support for HID-based sensors, including the ones used for automatic screen rotation, on the Surface Pro 8. Signed-off-by:
Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20220810144117.493710-4-luzmaximilian@gmail.comReviewed-by:
-
Maximilian Luz authored
On Windows, the HID devices with target ID 1 are grouped as "Surface Hot Plug - SAM". Rename their device nodes in the registry to reflect that and update the comments accordingly. Signed-off-by:
-
Maximilian Luz authored
Rename HID device nodes based on their function. In particular, these are nodes for firmware updates via the CFU mechanism (component firmware update), HID based sensors, and a USB-C UCSI client. Signed-off-by:
-
Maximilian Luz authored
The Surface Laptop Go 2 seems to have the same SAM client devices as the Surface Laptop Go 1, so re-use its node group. Signed-off-by:
-
Hans de Goede authored
The x86-android-tablets handling for the Chuwi Hi8 is only necessary with the Android BIOS and it is causing problems with the Windows BIOS version. Specifically when trying to register the already present touchscreen x86_acpi_irq_helper_get() calls acpi_unregister_gsi(), this breaks the working of the touchscreen and also leads to an oops: [ 14.248946] ------------[ cut here ]------------ [ 14.248954] remove_proc_entry: removing non-empty directory 'irq/75', leaking at least 'MSSL0001:00' [ 14.248983] WARNING: CPU: 3 PID: 440 at fs/proc/generic.c:718 remove_proc_entry ... [ 14.249293] unregister_irq_proc+0xe0/0x100 [ 14.249305] free_desc+0x29/0x70 [ 14.249312] irq_free_descs+0x4b/0x80 [ 14.249320] mp_unmap_irq+0x5c/0x60 [ 14.249329] acpi_unregister_gsi_ioapic+0x2a/0x40 [ 14.249338] x86_acpi_irq_helper_get+0x4b/0x190 [x86_android_tablets] [ 14.249355] x86_android_tablet_init+0x178/0xe34 [x86_android_tablets] Add an init callback for the Chuwi Hi8, which detects when the Windows BIOS is in use and exits with -ENODEV in that case, fixing this. Fixes: 84c2dcdd ("platform/x86: x86-android-tablets: Add an init() callback to struct x86_dev_info") Signed-off-by:
-
Andy Shevchenko authored
The style of the comments is not uniform, make it so and fix a few grammar issues. While at it, update Copyright years. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220801113734.36131-4-andriy.shevchenko@linux.intel.comReviewed-by:
-
Andy Shevchenko authored
Make terminator entry uniform by dropping: - trailing commas - anything inside curly braces Signed-off-by:
-
Andy Shevchenko authored
Not everyone can get what "critclks" means in the message, improve it to make less cryptic. Signed-off-by:
-
Andy Shevchenko authored
On Intel hardware the SLP_TYPx bitfield occupies bits 10-12 as per ACPI specification (see Table 4.13 "PM1 Control Registers Fixed Hardware Feature Control Bits" for the details). Fix the mask and other related definitions accordingly. Fixes: 93e5eadd ("x86/platform: New Intel Atom SOC power management controller driver") Signed-off-by:
-
Greg Kroah-Hartman authored
The driver core supports the ability to handle the creation and removal of device-specific sysfs files in a race-free manner. Take advantage of that by converting this driver to use this by moving the sysfs attributes into a group and assigning the dev_groups pointer to it. Cc: Perry Yuan <Perry.Yuan@dell.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Gross <markgross@kernel.org> Cc: Dell.Client.Kernel@dell.com Cc: platform-driver-x86@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20220729115302.2258296-1-gregkh@linuxfoundation.orgReviewed-by:
-
Hans de Goede authored
-
- 24 Aug, 2022 2 commits
-
-
Shyam Sundar S K authored
variable 'mode' is used uninitialized whenever switch default is taken in sps.c which leads to the following clang warning. drivers/platform/x86/amd/pmf/sps.c:96:2: error: variable 'mode' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized] default: ^~~~~~~ drivers/platform/x86/amd/pmf/sps.c:101:9: note: uninitialized use occurs here return mode; ^~~~ drivers/platform/x86/amd/pmf/sps.c:84:9: note: initialize the variable 'mode' to silence this warning u8 mode; ^ = '\0' 1 error generated. Fix it by returning -EOPNOTSUPP in default case and also change the return type of the function amd_pmf_get_pprof_modes() to keep it similar like other drivers which implement platform_profile. Fixes: 4c71ae41 ("platform/x86/amd/pmf: Add support SPS PMF feature") Reported-by:Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20220822062917.4061503-1-Shyam-sundar.S-k@amd.comReviewed-by:
-
Shyam Sundar S K authored
Its reported that amd-pmf driver when built with config which does not have ACPI_PLATFORM_PROFILE set/enabled throws a undefined references to symbols used. ld: vmlinux.o: in function `amd_pmf_init_sps': drivers/platform/x86/amd/pmf/sps.c:132: undefined reference to `platform_profile_register' ld: vmlinux.o: in function `amd_pmf_deinit_sps': drivers/platform/x86/amd/pmf/sps.c:142: undefined reference to `platform_profile_remove' Fix it by adding a "select" to the Kconfig. Fixes: da5ce22d ("platform/x86/amd/pmf: Add support for PMF core layer") Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
- 15 Aug, 2022 11 commits
-
-
Shyam Sundar S K authored
Update the MAINTAINERS file with AMD PMF driver details. Reviewed-by:
-
Shyam Sundar S K authored
Some of the older platforms with _HID "AMDI0100" PMF driver can be force loaded by interested users but only for experimental purposes. Reviewed-by:
-
Shyam Sundar S K authored
The transition to auto-mode happens when the PMF driver receives AMT (Auto Mode transition) event. transition logic will reside in the PMF driver but the events would come from other supported drivers[1]. The thermal parameters would vary between when a performance "on-lap" mode is detected and versus when not. The CQL event would get triggered from other drivers, so that PMF driver would adjust the system thermal config based on the ACPI inputs. OEMs can control whether or not to enable AMT or CQL via other supported drivers[1] but the actual transition logic resides in the AMD PMF driver. When an AMT event is received the automatic mode transition RAPL algorithm will run. When a CQL event is received an performance "on-lap" mode will be enabled and thermal parameters will be adjusted accordingly. [1] Link: https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/commit/?h=review-hans&id=755b249250df1b612d982f3b702c831b26ecdf73 Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Mark Pearson <markpearson@lenovo.com> Signed-off-by:
-
Shyam Sundar S K authored
This feature has 3 modes quiet, balanced, performance The objective of this feature is to track the moving average of system power over the time period specified and switch to the subsequent mode. In order to do this, PMF driver will get the moving average of APU power from PMFW and power threshold, time constants, system config parameters from OEM inputs. System power as read by PMF driver from PMFW is the filtered value over the sampling window. Every sampling window, moving average of system power is computed. At the end of the monitoring window, the moving average is compared against the threshold for mode switch for decision making. With AMD managing the system config limits, any mode switch within auto-mode will result in limits of fPPT/sPPT/STAPM or STT being scaled down. When "auto mode" is enabled, the static slider control remains out of the PMF driver, so the platform_profile registration would not happen in PMF driver. The transition to auto-mode only happens when the APMF fn5 is enabled in BIOS, platform_profile set to "balanced" and a AMT (Auto Mode transition) is received. Reviewed-by:
-
Shyam Sundar S K authored
PMF driver polls for metrics information from PMFW to understand the system behavior, power consumption etc. This metrics table information will be used the PMF features to tweak the thermal heuristics. The poll duration can also be changed by the user by changing the poll duration time. Reviewed-by:
-
Shyam Sundar S K authored
PMF has a generic interface defined via PMF ACPI fn9 for influencing fan policy during mode switch. PMF ACPI fn9 will normally be invoked when AMDPMF needs to change the fan table index for the EC. When AMDPMF is loaded this function will be invoked to change fan speed. OEM can also choose to report the actual fan table index and fan RPM to PMF through OEM structure. This information will be communicated by PMF driver to customer BIOS. Reviewed-by:
-
Shyam Sundar S K authored
PMF driver can send periodic heartbeat signals to OEM BIOS. When BIOS does not receive the signal after a period of time, it can infer that AMDPMF has hung or failed to load. In this situation, BIOS can fallback to legacy operations. OEM can modify the time interval of the signal or completely disable signals through ACPI Method. Reviewed-by:
-
Shyam Sundar S K authored
Add debugfs support to the PMF driver so that using this interface the live counters from the PMFW can be queried to see if the power parameters are getting set properly when a certain power mode change happens. Reviewed-by:
-
Shyam Sundar S K authored
SPS (a.k.a. Static Power Slider) gives a feel of Windows performance power slider for the Linux users, where the user selects a certain mode (like "balanced", "low-power" or "performance") and the thermals associated with each selected mode gets applied from the silicon side via the mailboxes defined through PMFW. PMF driver hooks to platform_profile by reading the PMF ACPI fn9 to see if the support is being advertised by ACPI interface. If supported, the PMF driver reacts to platform_profile selection choices made by the user and adjust the system thermal behavior. Reviewed-by:
-
Shyam Sundar S K authored
PMF driver implements the ACPI methods as defined by AMD for PMF Support. The ACPI layer acts as a glue that helps in providing the infrastructure for OEMs customization. OEMs can refer to PMF support documentation to decide on the list of functions to be supported on their specific platform model. AMD mandates that PMF ACPI fn0 and fn1 to be implemented which provides the set of functions, params and the notifications that would be sent to PMF driver so that PMF driver can adapt and react. Signed-off-by:
-
Shyam Sundar S K authored
PMF core layer is meant to abstract the common functionalities across PMF features. This layer also does the plumbing work like setting up the mailbox channel for the communication between the PMF driver and the PMFW (Power Management Firmware) running on the SMU. Reviewed-by:
-
- 14 Aug, 2022 10 commits
-
-
Linus Torvalds authored
-
Yury Norov authored
Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we have gfp_types.h for this. Fixes powerpc allmodconfig build: In file included from include/linux/nodemask.h:97, from include/linux/mmzone.h:17, from include/linux/gfp.h:7, from include/linux/radix-tree.h:12, from include/linux/idr.h:15, from include/linux/kernfs.h:12, from include/linux/sysfs.h:16, from include/linux/kobject.h:20, from include/linux/pci.h:35, from arch/powerpc/kernel/prom_init.c:24: include/linux/random.h: In function 'add_latent_entropy': >> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'? 25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy)); | ^~~~~~~~~~~~~~ | add_latent_entropy include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in Reported-by:kernel test robot <lkp@intel.com> CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Yury Norov <yury.norov@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs lseek fix from Al Viro: "Fix proc_reg_llseek() breakage. Always had been possible if somebody left NULL ->proc_lseek, became a practical issue now" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: take care to handle NULL ->proc_lseek()
-
Al Viro authored
Easily done now, just by clearing FMODE_LSEEK in ->f_mode during proc_reg_open() for such entries. Fixes: 868941b1 "fs: remove no_llseek" Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull more xen updates from Juergen Gross: - fix the handling of the "persistent grants" feature negotiation between Xen blkfront and Xen blkback drivers - a cleanup of xen.config and adding xen.config to Xen section in MAINTAINERS - support HVMOP_set_evtchn_upcall_vector, which is more compliant to "normal" interrupt handling than the global callback used up to now - further small cleanups * tag 'for-linus-6.0-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: MAINTAINERS: add xen config fragments to XEN HYPERVISOR sections xen: remove XEN_SCRUB_PAGES in xen.config xen/pciback: Fix comment typo xen/xenbus: fix return type in xenbus_file_read() xen-blkfront: Apply 'feature_persistent' parameter when connect xen-blkback: Apply 'feature_persistent' parameter when connect xen-blkback: fix persistent grants negotiation x86/xen: Add support for HVMOP_set_evtchn_upcall_vector
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tool updates from Arnaldo Carvalho de Melo: - 'perf c2c' now supports ARM64, adjust its output to cope with differences with what is in x86_64. Now go find false sharing on ARM64 (at least Neoverse) as well! - Refactor the JSON processing, making the output more compact and thus reducing the size of the resulting perf binary - Improvements for 'perf offcpu' profiling, including tracking child processes - Update Intel JSON metrics and events files for broadwellde, broadwellx, cascadelakex, haswellx, icelakex, ivytown, jaketown, knightslanding, sapphirerapids, skylakex and snowridgex - Add 'perf stat' JSON output and a 'perf test' entry for it - Ignore memfd and anonymous mmap events if jitdump present - Refactor 'perf test' shell tests allowing subdirs - Fix an error handling path in 'parse_perf_probe_command()' - Fixes for the guest Intel PT tracing patchkit in the 1st batch of this merge window - Print debuginfod queries if -v option is used, to explain delays in processing when debuginfo servers are enabled to fetch DSOs with richer symbol tables - Improve error message for 'perf record -p not_existing_pid' - Fix openssl and libbpf feature detection - Add PMU pai_crypto event description for IBM z16 on 'perf list' - Fix typos and duplicated words on comments in various places * tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (81 commits) perf test: Refactor shell tests allowing subdirs perf vendor events: Update events for snowridgex perf vendor events: Update events and metrics for skylakex perf vendor events: Update metrics for sapphirerapids perf vendor events: Update events for knightslanding perf vendor events: Update metrics for jaketown perf vendor events: Update metrics for ivytown perf vendor events: Update events and metrics for icelakex perf vendor events: Update events and metrics for haswellx perf vendor events: Update events and metrics for cascadelakex perf vendor events: Update events and metrics for broadwellx perf vendor events: Update metrics for broadwellde perf jevents: Fold strings optimization perf jevents: Compress the pmu_events_table perf metrics: Copy entire pmu_event in find metric perf pmu-events: Hide the pmu_events perf pmu-events: Don't assume pmu_event is an array perf pmu-events: Move test events/metrics to JSON perf test: Use full metric resolution perf pmu-events: Hide pmu_events_map ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Ensure we never emit lwarx with EH=1 on 32-bit, because some 32-bit CPUs trap on it rather than ignoring it as they should. - Fix ftrace when building with clang, which was broken by some refactoring. - A couple of other minor fixes. Thanks to Christophe Leroy, Naveen N. Rao, Nick Desaulniers, Ondrej Mosnacek, Pali Rohár, Russell Currey, and Segher Boessenkool. * tag 'powerpc-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/kexec: Fix build failure from uninitialised variable powerpc/ppc-opcode: Fix PPC_RAW_TW() powerpc64/ftrace: Fix ftrace for clang builds powerpc: Make eh value more explicit when using lwarx powerpc: Don't hide eh field of lwarx behind a macro powerpc: Fix eh field when calling lwarx on PPC32
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull /proc/mounts fix from Al Viro: "Fix for /proc/mounts escaping - escape the '#' character too" * tag 'pull-work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: escape hash as well
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull more cifs updates from Steve French: - two fixes for stable, one for a lock length miscalculation, and another fixes a lease break timeout bug - improvement to handle leases, allows the close timeout to be configured more safely - five restructuring/cleanup patches * tag '5.20-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Do not access tcon->cfids->cfid directly from is_path_accessible cifs: Add constructor/destructors for tcon->cfid SMB3: fix lease break timeout when multiple deferred close handles for the same file. smb3: allow deferred close timeout to be configurable cifs: Do not use tcon->cfid directly, use the cfid we get from open_cached_dir cifs: Move cached-dir functions into a separate file cifs: Remove {cifs,nfs}_fscache_release_page() cifs: fix lock length calculation
-
David Howells authored
Enable multipage folio support for the afs filesystem. Support has already been implemented in netfslib, fscache and cachefiles and in most of afs, but I've waited for Matthew Wilcox's latest folio changes. Note that it does require a change to afs_write_begin() to return the correct subpage. This is a "temporary" change as we're working on getting rid of the need for ->write_begin() and ->write_end() completely, at least as far as network filesystems are concerned - but it doesn't prevent afs from making use of the capability. Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: kafs-testing@auristor.com Cc: Marc Dionne <marc.dionne@auristor.com> Cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/lkml/2274528.1645833226@warthog.procyon.org.uk/Signed-off-by:
-
- 13 Aug, 2022 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Ingo Molnar: "Misc timer fixes: - fix a potential use-after-free bug in posix timers - correct a prototype - address a build warning" * tag 'timers-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-cpu-timers: Cleanup CPU timers before freeing them during exec time: Correct the prototype of ns_to_kernel_old_timeval and ns_to_timespec64 posix-timers: Make do_clock_gettime() static
-
