- 14 Jan, 2014 40 commits
-
-
Joe Perches authored
Add pr_fmt to prefix "audit: " to output Convert printk(KERN_<LEVEL> to pr_<level> Coalesce formats Use pr_cont Move a brace after switch Signed-off-by:Joe Perches <joe@perches.com>
-
Joe Perches authored
Using the generic kernel function causes the object size to increase with gcc 4.8.1. $ size kernel/audit.o* text data bss dec hex filename 18577 6079 8436 33092 8144 kernel/audit.o.new 18579 6015 8420 33014 80f6 kernel/audit.o.old Unsigned...
-
AKASHI Takahiro authored
audit_syscall_exit() saves a result of regs_return_value() in intermediate "int" variable and passes it to __audit_syscall_exit(), which expects its second argument as a "long" value. This will result in truncating the value returned by a system call and making a wrong audit record. I don't know why gcc compiler doesn't complain about this, but anyway it causes a problem at runtime on arm64 (and probably most 64-bit archs). Signed-off-by:
AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Eric Paris <eparis@redhat.com>
-
Eric Paris authored
An admin is likely to want to see old and new values next to each other. Putting all of the old values followed by all of the new values is just hard to read as a human. Signed-off-by: -
Eric Paris authored
We can simplify the AUDIT_TTY_SET code to only grab the spin_lock one time. We need to determine if the new values are valid and if so, set the new values at the same time we grab the old onces. While we are here get rid of 'res' and just use err. Signed-off-by: -
Eric Paris authored
If userspace specified that it was setting values via the mask we do not need a second check to see if they also set the version field high enough to understand those values. (clearly if they set the mask they knew those values). Signed-off-by: -
Eric Paris authored
Give names to the audit versions. Just something for a userspace programmer to know what the version provides. Signed-off-by: -
Eric Paris authored
Further documentation of the 3 possible kernel value of the audit command line option. Signed-off-by: -
Eric Paris authored
We had some craziness with signed to unsigned long casting which appears wholely unnecessary. Just use signed long. Even though 2 values of the math equation are unsigned longs the result is expected to be a signed long. So why keep casting the result to signed long? Just make it signed long and use it. We also remove the needless "timeout" variable. We already have the stack "sleep_time" variable. Just use that... Signed-off-by: -
Richard Guy Briggs authored
Al's tree is stale and no longer updated. Al is no longer active in maitaining audit. Eric's tree is authoritative. Signed-off-by: -
Richard Guy Briggs authored
Add task information to the log when changing a feature state. Signed-off-by: -
Gao feng authored
NETLINK_CB(skb).sk is the socket of user space process, netlink_unicast in kauditd_send_skb wants the kernel side socket. Since the sk_state of audit netlink socket is not NETLINK_CONNECTED, so the netlink_getsockbyportid doesn't return -ECONNREFUSED. And the socket of userspace process can be released anytime, so the audit_sock may point to invalid socket. this patch sets the audit_sock to the kernel side audit netlink socket. Signed-off-by:
Gao feng <gaofeng@cn.fujitsu.com> Acked-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
-
Gao feng authored
print the error message and then return -ENOMEM. Signed-off-by:
-
Richard Guy Briggs authored
Remove spaces between "new", "old" label modifiers and "auid", "ses" labels in log output since userspace tools can't parse orphaned keywords. Make variable names more consistent and intuitive. Make audit_log_format() argument code easier to read. Signed-off-by:
-
Richard Guy Briggs authored
An error on an AUDIT_NEVER rule disabled logging on that rule. On error on AUDIT_NEVER rules, log. Signed-off-by:
-
Toshiyuki Okajima authored
The backlog cannot be consumed when audit_log_start is running on auditd even if audit_log_start calls wait_for_auditd to consume it. The situation is the deadlock because only auditd can consume the backlog. If the other process needs to send the backlog, it can be also stopped by the deadlock. So, audit_log_start running on auditd should not stop. You can see the deadlock with the following reproducer: # auditctl -a exit,always -S all # reboot Signed-off-by:
Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Reviewed-by: gaofeng@cn.fujitsu.com Signed-off-by:
-
Richard Guy Briggs authored
We do not need to hold the audit_cmd_mutex for this family of cases. The possible exception to this is the call to audit_filter_user(), so drop the lock immediately after. To help in fixing the race we are trying to avoid, make sure that nothing called by audit_filter_user() calls audit_log_start(). In particular, watch out for *_audit_rule_match(). This fix will take care of systemd and anything USING audit. It still means that we could race with something configuring audit and auditd shutting down. Signed-off-by:
-
Richard Guy Briggs authored
Remove the call to audit_log() (which call audit_log_start()) and deal with the errors in the caller, logging only once if the condition is met. Calling audit_log_start() in this location makes buffer allocation and locking more complicated in the calling tree (audit_filter_user()). Signed-off-by:
-
Richard Guy Briggs authored
Two of the conditions in selinux_audit_rule_match() should never happen and the third indicates a race that should be retried. Remove the calls to audit_log() (which call audit_log_start()) and deal with the errors in the caller, logging only once if the condition is met. Calling audit_log_start() in this location makes buffer allocation and locking more complicated in the calling tree (audit_filter_user()). Signed-off-by:
-
Eric Paris authored
Right now the sessionid value in the kernel is a combination of u32, int, and unsigned int. Just use unsigned int throughout. Signed-off-by:
-
Paul Davies C authored
Currently when the coredump signals are logged by the audit system, the actual path to the executable is not logged. Without details of exe, the system admin may not have an exact idea on what program failed. This patch changes the audit_log_task() so that the path to the exe is also logged. This was copied from audit_log_task_info() and the latter enhanced to avoid disappearing text fields. Signed-off-by:
Paul Davies C <pauldaviesc@gmail.com> Signed-off-by:
-
Richard Guy Briggs authored
There have been reports of auditd restarts resulting in kaudit not being able to find a newly registered auditd. It results in reports such as: kernel: [ 2077.233573] audit: *NO* daemon at audit_pid=1614 kernel: [ 2077.234712] audit: audit_lost=97 audit_rate_limit=0 audit_backlog_limit=320 kernel: [ 2077.234718] audit: auditd disappeared (previously mis-spelled "dissapeared") One possible cause is a race between the shutdown of an older auditd and a newer one. If the newer one sets the daemon pid to itself in kauditd before the older one has cleared the daemon pid, the newer daemon pid will be erased. This could be caused by an automated system, or by manual intervention, but in either case, there is no use in having the older daemon clear the daemon pid reference since its old pid is no longer being referenced. This patch will prevent that specific case, returning an error of EACCES. The case for preventing a newer auditd from registering itself if there is an existing auditd is a more difficult case that is beyond the scope of this patch. Signed-off-by:
-
Richard Guy Briggs authored
audit_receive_msg() needlessly contained a fallthrough case that called audit_receive_filter(), containing no common code between the cases. Separate them to make the logic clearer. Refactor AUDIT_LIST_RULES, AUDIT_ADD_RULE, AUDIT_DEL_RULE cases to create audit_rule_change(), audit_list_rules_send() functions. This should not functionally change the logic. Signed-off-by:
-
Richard Guy Briggs authored
Log transition of config changes when AUDIT_TTY_SET is called, including both enabled and log_passwd values now in the struct. Signed-off-by:
-
Richard Guy Briggs authored
kauditd_send_skb is called after audit_pid was checked to be non-zero. However, it can be set to 0 due to auditd exiting while kauditd_send_skb is still executed and this can result in a spurious warning about missing auditd. Re-check audit_pid before printing the message. Signed-off-by:
Mateusz Guzik <mguzik@redhat.com> Cc: Eric Paris <eparis@redhat.com> Cc: linux-kernel@vger.kernel.org Acked-by:
-
Paul Davies C authored
The audit_log_abend() is used only by the audit_core_dumps(). Thus there is no need of maintaining the audit_log_abend() as a separate function. This patch drops the audit_log_abend() and pushes its functionalities back to the audit_core_dumps(). Apart from that the "reason" field is also dropped from being logged since the reason can be deduced from the signal number. Signed-off-by:
-
Richard Guy Briggs authored
Since audit can already be disabled by "audit=0" on the kernel boot line, or by the command "auditctl -e 0", it would be more useful to have the audit_backlog_limit set to zero mean effectively unlimited (limited only by system RAM). Acked-by:
-
Richard Guy Briggs authored
The type of task->sessionid is unsigned int, the return type of audit_get_sessionid should be consistent with it. Signed-off-by:
-
Gao feng authored
If audit is disabled, we shouldn't generate loginuid audit log. Acked-by:
-
Gao feng authored
we already have old_lock, no need to calculate it again. Acked-by:
-
Gao feng authored
If audit is disabled,we shouldn't generate the audit log. Acked-by:
-
Gao feng authored
The order of new feature and old feature is incorrect, this patch fix it. Acked-by:
-
Gao feng authored
Since kernel parameter is operated before initcall, so the audit_initialized must be AUDIT_UNINITIALIZED or DISABLED in audit_enable. Signed-off-by:
-
Richard Guy Briggs authored
reaahead-collector abuses the audit logging facility to discover which files are accessed at boot time to make a pre-load list Add a tuning option to audit_backlog_wait_time so that if auditd can't keep up, or gets blocked, the callers won't be blocked. Bump audit_status API version to "2". Signed-off-by:
-
Richard Guy Briggs authored
Re-named confusing local variable names (status_set and status_get didn't agree with their command type name) and reduced their scope. Future-proof API changes by not depending on the exact size of the audit_status struct and by adding an API version field. Signed-off-by:
-
Richard Guy Briggs authored
The default audit_backlog_limit is 64. This was a reasonable limit at one time. systemd causes so much audit queue activity on startup that auditd doesn't start before the backlog queue has already overflowed by more than a factor of 2. On a system with audit= not set on the kernel command line, this isn't an issue since that history isn't kept for auditd when it is available. On a system with audit=1 set on the kernel command line, kaudit tries to keep that history until auditd is able to drain the queue. This default can be changed by the "-b" option in audit.rules once the system has booted, but won't help with lost messages on boot. One way to solve this would be to increase the default backlog queue size to avoid losing any messages before auditd is able to consume them. This would be overkill to the embedded community and insufficient for some servers. Another way to solve it might be to add a kconfig option to set the default based on the system type. An embedded system would get the current (or smaller) default, while Workstations might get more than now and servers might get more. None of these solutions helps if a system's compiled default is too small to see the lost messages without compiling a new kernel. This patch adds a kernel set-up parameter (audit already has one to enable/disable it) "audit_backlog_limit=<n>" that overrides the default to allow the system administrator to set the backlog limit. Signed-off-by:
-
Richard Guy Briggs authored
Add the "audit=" kernel start-up parameter to Documentation/kernel-parameters.txt. Signed-off-by:
-
Dan Duval authored
These and similar errors were seen on a patched 3.8 kernel when the audit subsystem was overrun during boot: udevd[876]: worker [887] unexpectedly returned with status 0x0100 udevd[876]: worker [887] failed while handling '/devices/pci0000:00/0000:00:03.0/0000:40:00.0' udevd[876]: worker [880] unexpectedly returned with status 0x0100 udevd[876]: worker [880] failed while handling '/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1' udevadm settle - timeout of 180 seconds reached, the event queue contains: /sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1 (3995) /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/INT3F0D:00 (4034) audit: audit_backlog=258 > audit_backlog_limit=256 audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=256 The change below increases the efficiency of the audit code and prevents it from being overrun: Use add_wait_queue_exclusive() in wait_for_auditd() to put the thread on the wait queue. When kauditd dequeues an skb, all of the waiting threads are waiting for the same resource, but only one is going to get it, so there's no need to wake up more than one waiter. See: https://lkml.org/lkml/2013/9/2/479Signed-off-by:Dan Duval <dan.duval@oracle.com> Signed-off-by:
Chuck Anderson <chuck.anderson@oracle.com> Signed-off-by:
-
Dan Duval authored
These and similar errors were seen on a patched 3.8 kernel when the audit subsystem was overrun during boot: udevd[876]: worker [887] unexpectedly returned with status 0x0100 udevd[876]: worker [887] failed while handling '/devices/pci0000:00/0000:00:03.0/0000:40:00.0' udevd[876]: worker [880] unexpectedly returned with status 0x0100 udevd[876]: worker [880] failed while handling '/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1' udevadm settle - timeout of 180 seconds reached, the event queue contains: /sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1 (3995) /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/INT3F0D:00 (4034) audit: audit_backlog=258 > audit_backlog_limit=256 audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=256 The change below increases the efficiency of the audit code and prevents it from being overrun: Only issue a wake_up in kauditd if the length of the skb queue is less than the backlog limit. Otherwise, threads waiting in wait_for_auditd() will simply wake up, discover that the queue is still too long for them to proceed, and go back to sleep. This results in wasted context switches and machine cycles. kauditd_thread() is the only function that removes buffers from audit_skb_queue so we can't race. If we did, the timeout in wait_for_auditd() would expire and the waiting thread would continue. See: https://lkml.org/lkml/2013/9/2/479Signed-off-by: -
Richard Guy Briggs authored
If wait_for_auditd() times out, go immediately to the error function rather than retesting the loop conditions. Signed-off-by:
-
