SR-IOV may need to load different firmwares for different ASIC inside
VF.
So create a new function in amdgpu_virt to check whether FW load needs
to be skipped.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Restrict the ucode loading check to avoid frontdoor loading error.
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add psp v13_0_10 ip block, initialize firmware and
psp functions
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

'free PSP TMR buffer' happens in suspend, but sometimes
in mGPU config, it mixes with PSP resume log printing from
another GPU, which is confusing. So use dev_info instead of
DRM_INFO for printing.

[drm] PSP is resuming...
[drm] reserve 0xa00000 from 0x877e000000 for PSP TMR
amdgpu 0000:e3:00.0: amdgpu: GECC is enabled
amdgpu 0000:e3:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
amdgpu 0000:e3:00.0: amdgpu: SMU is resuming...
amdgpu 0000:e3:00.0: amdgpu: smu driver if version = 0x00000040, smu fw if version = 0x00000041, smu fw program = 0, version = 0x003a5400 (58.84.0)
amdgpu 0000:e3:00.0: amdgpu: SMU driver if version not matched
amdgpu 0000:e3:00.0: amdgpu: dpm has been enabled
amdgpu 0000:e3:00.0: amdgpu: SMU is resumed successfully!
[drm] DMUB hardware initialized: version=0x02020014
[drm] free PSP TMR buffer
[drm] kiq ring mec 2 pipe 1 q 0
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

V1:
The amdgpu_xgmi_remove_device function will send unload command
to psp through psp ring to terminate xgmi, but psp ring has been
destroyed in psp_hw_fini.

V2:
1. Change the commit title.
2. Restore amdgpu_xgmi_remove_device to its original calling location.
   Move psp_xgmi_terminate call from amdgpu_xgmi_remove_device to
   psp_hw_fini.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch will enable support for psp 13.0.4 blcok.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Hives that require psp topology info to be reflected will leak hive
reference so fix it.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Support {GLOBAL/SE0/SE1/SE2/SE3}_TAP_DELAYS uploading.

v2: upload TAP_DELAYS before RLC autoload was triggered. (Hawking)
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

SMU is always alive, so it's fine to skip SMU FW reloading
when runpm resumed from BACO, this can avoid some race issues
when resuming SMU.
Suggested-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Check shared buf instead of init flag for xgmi ta shared buf init
during xgmi ta initialization.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

In SRIOV, PSP will block incompatible firmware from loading. When this happens,
driver should be prevented from continue initialization and start cleanup.
Return failure in psp_cmd_submit_buf when firmware load failed in SRIOV.
Signed-off-by: Alice Wong <shiwei.wong@amd.com>
Reviewed-by: Sashank Saye <sashank.saye@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add new sysfs interface to shows the status of psp vbflash status.

V2: rename the sysfs interface, and set more return value.
    (0: not start; 1: in progress; MBX115 value when vbflash finish)
V3: warning fixes
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add sysfs interface to copy VBIOS.

v2: squash in fix for proper vmalloc API (Alex)
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable support in psp code.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add convert for CP RS64 related gfx ip type.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Support for front door to load IMU firmware.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Support for SDMA v6_0 ucode front door load.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Support RLCV firmware front door load.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Support RLCP firmware front door load.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add MES KIQ PSP GFX FW type and the convert type.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

With SCPM enabled, pptable cannot be uploaded to SMU directly.
The transferring has to be via PSP.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add parmeter to shows whether SCPM feature is enabled or not, and
whether is valid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Support psp v13_0_0 microcode init.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

psp_load_fw failure would cause memory leak for psp tmr and psp ring
because psp_hw_init is not called as psp block is not fully initialized.
Clean up psp tmr and psp ring when psp_load_fw fail by calling
psp_free_shared_bufs and psp_ring_destroy.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alice Wong <shiwei.wong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

So we can properly clean up if any of the TAs or TMR fails
to properly initialize or terminate.  This avoids any
memory leaks in the error case.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Make sure we free the memory even if the unload fails.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Just call the load/unload/init_shared_buf functions
directly.  Makes the code easier to follow.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Memory allocations should be done in sw_init.  hw_init should
just be hardware programming needed to initialize the IP block.
This is how most other IP blocks work.  Move the GPU memory
allocations from psp hw_init to psp sw_init and move the memory
free to sw_fini.  This also fixes a potential GPU memory leak
if psp hw_init fails.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Load ta fw during psp_init_sriov_microcode to enable XGMI.
It is required to be loaded by both guest and host starting
from Arcturus. Cap fw needs to be loaded first.
Signed-off-by: David Yu <David.Yu@amd.com>
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The upcoming TA debugfs interface needs to use indirect buffer
when performing TA invoke and check psp response status for TA
load and invoke.
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

VFs must also distinguish whether or not the TA supports full duplex or
half duplex link records in order to report the correct xGMI topology.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add DFC CAP support for aldebaran

Initialize cap microcode in psp_init_sriov_microcode,
the ta microcode will be  initialized in psp_vxx_init_microcode
Signed-off-by: David Yu <David.Yu@amd.com>
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enabl psp support for psp 13.0.5.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Set psp sw funcs callback and firmware loading for MP0.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Since this is an existing asic, adjust the code to follow
the same logic as previously so the driver state is consistent.

No functional change intended.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add basic support for GC 10.1.4,
it uses same IP blocks with GC 10.1.3
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Return value from amdgpu_bo_create_kernel() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Changed from v1:
    remove unused brace
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

- Add interface to load SRIOV cap FW. If the FW does not
  exist, simply skip this FW loading routine.
  This FW will only be loaded under SRIOV. Other driver
  configuration will not be affected.
  By adding this interface, it will make us easier to
  prepare SRIOV Linux guest driver for different users.

- Update sysfs interface to read cap FW version.

- Refactor PSP FW loading routine under SRIOV to use a
  unified SWITCH statement instead of using IF statement

- Remove redundant amdgpu_sriov_vf() check in FW loading
  routine
Acked-by: Monk Liu <monk.liu@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
psp tmr bo will be pinned during loading amdgpu and reset in SRIOV while
only unpinned in unload amdgpu

[How]
add amdgpu_in_reset and sriov judgement to skip pin bo

v2: fix wrong judgement
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Horace Chen <horace.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>