- 01 Oct, 2015 6 commits
-
-
Ricardo Ribalda authored
Referenced file has moved Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Add support for 10 and 12 bit Bayer formats to the test pattern generator and the vivid driver. Signed-off-by:
-
Hans Verkuil authored
Add the missing support for v4l2_sdr_format (V4L2_BUF_TYPE_SDR_CAPTURE). Signed-off-by:
-
Geliang Tang authored
Fix the following 'make htmldocs' warnings: .//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'frame_height' .//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'hfreq' .//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'vsync' .//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'active_width' .//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'polarities' .//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'interlaced' .//include/media/v4l2-dv-timings.h:147: warning: No description found for parameter 'fmt' .//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'frame_height' .//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'hfreq' .//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'vsync' .//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'polarities' .//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'interlaced' .//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'aspect' .//include/media/v4l2-dv-timings.h:171: warning: No description found for parameter 'fmt' .//include/media/v4l2-dv-timings.h:184: warning: No description found for parameter 'hor_landscape' .//include/media/v4l2-dv-timings.h:184: warning: No description found for parameter 'vert_portrait' Signed-off-by:
Geliang Tang <geliangtang@163.com> Signed-off-by:
-
Hans Verkuil authored
Use a type-safe assignment instead of memcpy. And it is easier to read as well. Signed-off-by:
-
Hans Verkuil authored
Document this new transfer function used by High Dynamic Range content. Signed-off-by:
-
- 30 Sep, 2015 9 commits
-
-
Hans Verkuil authored
Support the new SMPTE 2084 transfer function in the vivid test driver. Signed-off-by:
-
Hans Verkuil authored
Support the new SMPTE 2084 transfer function in the test pattern generator. Signed-off-by:
-
Hans Verkuil authored
CEA-861.3 adds support for the SMPTE 2084 Electro-Optical Transfer Function as can be used in HDR displays. Add a define for this in videodev2.h. Signed-off-by:
-
Hans Verkuil authored
Support this new colorspace in vivid. Signed-off-by:
-
Hans Verkuil authored
Add support to the test pattern generator for the DCI-P3 colorspace. Signed-off-by:
-
Hans Verkuil authored
Document this colorspace. Signed-off-by:
-
Hans Verkuil authored
This colorspace is used for cinema projectors and is supported by the DisplayPort standard. Signed-off-by:
-
Hans Verkuil authored
The V4L2_COLORSPACE_470_SYSTEM_M (aka NTSC 1953) colorspace has a different whitepoint (C) compared to Rec. 709 (D65). The Bradford method is the recommended method to compensate for that when converting a Rec. 709 color to an NTSC 1953 color. See http://www.brucelindbloom.com/index.html?Eqn_ChromAdapt.html for more details on the Bradford method. This patch updates the Rec. 709 to NTSC 1953 matrix so that it includes the chromatic adaptation as calculated by the Bradford method, and it recalculates the tpg_csc_colors table accordingly. Signed-off-by:
-
Hans Verkuil authored
The max value of various menu controls is hardcoded, and it is easy to forget to update it after adding a new menu item. So use ARRAY_SIZE instead to calculate this value. Signed-off-by:
-
- 25 Sep, 2015 23 commits
-
-
Hans Verkuil authored
Every time compat32 encounters an unknown ioctl it will call pr_warn. However, that's very irritating since it is perfectly normal that this happens. For example, applications often try to call an ioctl to see if it exists, and if that's used with an older kernel where compat32 doesn't support that ioctl yet, then it starts spamming the kernel log. So replace pr_warn by pr_debug. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Josh Wu authored
This patch will get the DT parameters of vsync/hsync/pixclock polarity, and pass to driver. Also add a debug information for test purpose. Signed-off-by:
Josh Wu <josh.wu@atmel.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Laurent Pinchart authored
The emb_crc_sync, mck_hz, asd and asd_sizes platform data fields are unused, remove them. Signed-off-by:
-
Laurent Pinchart authored
All in-tree users have migrated to DT, remove support for platform data. Signed-off-by:
-
Laurent Pinchart authored
Put the endpoint DT node earlier to avoid the need for goto statements to a cleanup code block in case of errors. Signed-off-by:
-
Josh Wu authored
After adding the format check in try_fmt()/set_fmt(), we don't need any format check in configure_geometry(). So make configure_geometry() as void type. Signed-off-by:
-
Josh Wu authored
As in set_fmt() function we only need to know which format is been set, we don't need to access the ISI hardware in this moment. So move the configure_geometry(), which access the ISI hardware, to start_streaming() will make code more consistent and simpler. Signed-off-by:
-
Josh Wu authored
In the function configure_geometry(), we will setup the ISI CFG2 according to the sensor output format. It make no sense to just read back the CFG2 register and just set part of it. So just set up this register directly makes things simpler. Currently only support YUV format from camera sensor. Signed-off-by:
-
Josh Wu authored
If ISI is working on a 1024x768 or higher resolution, it needs longer time to disable ISI. So this patch will increase timeout to 500ms. Signed-off-by:
-
Geert Uytterhoeven authored
If CONFIG_PM=n: drivers/media/platform/soc_camera/atmel-isi.c:1044: warning: 'atmel_isi_runtime_suspend' defined but not used drivers/media/platform/soc_camera/atmel-isi.c:1054: warning: 'atmel_isi_runtime_resume' defined but not used Protect the unused functions by #ifdef CONFIG_PM to fix this. Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
-
Sergei Shtylyov authored
Hans Verkuil says: "The only place querystd can be called is in the QUERYSTD ioctl, all other ioctls should use the last set standard." So call the g_std() subdevice method instead of querystd() in the driver's set_fmt() method. Reported-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by:
-
Sergei Shtylyov authored
rcar_vin_set_fmt() defaults to PAL when the subdevice's querystd() method call fails (e.g. due to I2C error). This doesn't work very well when a camera being used outputs NTSC which has different order of fields and resolution. Let us stop pretending and return the actual error except when the querystd() method is not implemented, in which case we'll have to set the 'field' variable to V4L2_FIELD_NONE. Note that doing this would prevent video capture on at least Renesas Henninger/ Porter boards where I2C seems particularly buggy. Signed-off-by:
-
Geert Uytterhoeven authored
Since commit a483dcbf ("ARM: shmobile: lager: Remove legacy board support"), R-Car Gen2 SoCs are only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to match platform devices by name anymore, hence remove the corresponding platform_device_id entry. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Josh Wu authored
Since in soc_of_bind() it may use the of node's full name as the clk_name, and this full name may be longer than 32 characters, take at91 i2c sensor as an example, length is 34 bytes: /ahb/apb/i2c@f8028000/camera@0x30 So this patch increase the clk_name[] array size to 64. It seems big enough so far. Signed-off-by:
-
Laurent Pinchart authored
The hardware timestamping implementation has been reported as not working correctly on at least the Logitech C920. Until this can be fixed, disable it by default. Reported-by:
Peter Rabbitson <rabbit@rabbit.us> Signed-off-by:
-
Antti Palosaari authored
* Constify struct * Fix comments * Fix alignment * Use modulus to transfer phase angles * Correct float [-1.0, +1.0] to s8 [-128, 127] conversion Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Add user control to adjust generated FM deviation. Default it to 75kHz like public FM radio broadcast. Signed-off-by:
-
Andrzej Hajda authored
Alignment/padding rules on AMD64 and ARM64 differs. To allow properly match compatible ioctls on ARM64 kernels without breaking AMD64 some fields should be aligned using compat_s64 type and in one case struct should be unpacked. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Cc: <stable@vger.kernel.org> # for v3.10 and up [hans.verkuil@cisco.com: use compat_u64 instead of compat_s64 in v4l2_input32] Signed-off-by:
-
Darek Zielski authored
Add Leadtek Winfast TV2100 FM card to saa7134 driver. It is a card bearing SAA7130HL chip. Signed-off-by:
Darek Zielski <dz1125tor@gmail.com> Signed-off-by:
-
Alexander Kuleshov authored
printk() supports %*ph format specifier for printing a small buffers, let's use it intead of %02x %02x... Signed-off-by:
Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by:
-
Zahari Doychev authored
This patch removes unnecessary mutex queue unlock/lock sequence causing bad unlock balance in v4l2_m2m_poll when the last buffer on the destination queue has been dequeued and adds spin lock protection for the done list list_empty calls. [ 144.990873] ===================================== [ 144.995584] [ BUG: bad unlock balance detected! ] [ 145.000301] 4.1.0-00137-ga105070 #98 Tainted: G W [ 145.006140] ------------------------------------- [ 145.010851] demux:sink/487 is trying to release lock (&dev->dev_mutex) at: [ 145.017785] [<808cc578>] mutex_unlock+0x18/0x1c [ 145.022322] but there are no more locks to release! [ 145.027205] [ 145.027205] other info that might help us debug this: [ 145.033741] no locks held by demux:sink/487. [ 145.038015] [ 145.038015] stack backtrace: [ 145.042385] CPU: 2 PID: 487 Comm: demux:sink Tainted: G W 4.1.0-00137-ga105070 #98 [ 145.051089] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 145.057622] Backtrace: [ 145.060102] [<80014a4c>] (dump_backtrace) from [<80014cc4>] (show_stack+0x20/0x24) [ 145.067679] r6:80cedf78 r5:00000000 r4:00000000 r3:00000000 [ 145.073421] [<80014ca4>] (show_stack) from [<808c61e0>] (dump_stack+0x8c/0xa4) [ 145.080661] [<808c6154>] (dump_stack) from [<80072b64>] (print_unlock_imbalance_bug+0xb8/0xe8) [ 145.089277] r6:808cc578 r5:ac6cd050 r4:ac38e400 r3:00000001 [ 145.095020] [<80072aac>] (print_unlock_imbalance_bug) from [<80077db4>] (lock_release+0x1a4/0x250) [ 145.103983] r6:808cc578 r5:ac6cd050 r4:ac38e400 r3:00000000 [ 145.109728] [<80077c10>] (lock_release) from [<808cc470>] (__mutex_unlock_slowpath+0xc4/0x1b4) [ 145.118344] r9:acb27a41 r8:00000000 r7:81553814 r6:808cc578 r5:60030013 r4:ac6cd01c [ 145.126190] [<808cc3ac>] (__mutex_unlock_slowpath) from [<808cc578>] (mutex_unlock+0x18/0x1c) [ 145.134720] r7:00000000 r6:aced7cd4 r5:00000041 r4:acb87800 [ 145.140468] [<808cc560>] (mutex_unlock) from [<805a98b8>] (v4l2_m2m_fop_poll+0x5c/0x64) [ 145.148494] [<805a985c>] (v4l2_m2m_fop_poll) from [<805955a0>] (v4l2_poll+0x6c/0xa0) [ 145.156243] r6:aced7bec r5:00000000 r4:ac6cc380 r3:805a985c [ 145.161991] [<80595534>] (v4l2_poll) from [<80156edc>] (do_sys_poll+0x230/0x4c0) [ 145.169391] r5:00000000 r4:aced7be4 [ 145.173013] [<80156cac>] (do_sys_poll) from [<801574a8>] (SyS_ppoll+0x1d4/0x1fc) [ 145.180414] r10:00000000 r9:aced6000 r8:00000000 r7:00000000 r6:75c04538 r5:00000002 [ 145.188338] r4:00000000 [ 145.190906] [<801572d4>] (SyS_ppoll) from [<800108c0>] (ret_fast_syscall+0x0/0x54) [ 145.198481] r8:80010aa4 r7:00000150 r6:75c04538 r5:00000002 r4:00000008 Signed-off-by:
Zahari Doychev <zahari.doychev@linux.com> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Nicolas Sugino authored
When using multiple capture cards, it might be necessary to identify a specific device with an ALSA one. If not, the order of the ALSA devices might have no relation to the id of the radio or video device. Signed-off-by:
Nicolas Sugino <nsugino@3way.com.ar> Signed-off-by:
-
Andrew Milkovich authored
This patch fixes the following sparse warnings: warning: ... may be used uninitialized in this function Some function variables have been initialized to 0. Signed-off-by:
Andrew Milkovich <amilkovich@gmail.com> Signed-off-by:
-
- 13 Sep, 2015 1 commit
-
-
Mauro Carvalho Chehab authored
Linux 4.3-rc1 * tag 'v4.3-rc1': (11838 commits) Linux 4.3-rc1 blk: rq_data_dir() should not return a boolean writeback: plug writeback in wb_writeback() and writeback_inodes_wb() thermal: fix intel PCH thermal driver mismerge ARCv2: [axs103_smp] Reduce clk for SMP FPGA configs revert "ocfs2/dlm: use list_for_each_entry instead of list_for_each" mm/early_ioremap: add explicit #include of asm/early_ioremap.h fs/seq_file: convert int seq_vprint/seq_printf/etc... returns to void selftests: enhance membarrier syscall test selftests: add membarrier syscall test sys_membarrier(): system-wide memory barrier (generic, x86) MODSIGN: fix a compilation warning in extract-cert Revert "writeback: plug writeback at a high level" scsi_dh: fix randconfig build error target: use stringify.h instead of own definition target/user: Fix UFLAG_UNKNOWN_OP handling target: Remove no-op conditional target/user: Remove unused variable target: Fix max_cmd_sn increment w/o cmdsn mutex regressions target: Attach EXTENDED_COPY local I/O descriptors to xcopy_pt_sess ...
-
- 12 Sep, 2015 1 commit
-
-
Linus Torvalds authored
-
