'peform' --> 'perform'
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit 3f34cfae ("netfilter: on sockopt() acquire sock lock
only in the required scope"), the caller of nf_{get/set}sockopt() must
not hold any lock, but, in such changeset, I forgot to cope with DECnet.

This commit addresses the issue moving the nf call outside the lock,
in the dn_{get,set}sockopt() with the same schema currently used by
ipv4 and ipv6. Also moves the unhandled sockopts of the end of the main
switch statements, to improve code readability.
Reported-by: Petr Vandrovec <petr@vandrovec.name>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198791#c2
Fixes: 3f34cfae ("netfilter: on sockopt() acquire sock lock only in the required scope")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We've run into a problem where our device is attached
to a Virtual Machine and the use of the new pci_set_vpd_size()
API doesn't help.  The VM kernel has been informed that
the accesses are okay, but all of the actual VPD Capability
Accesses are trapped down into the KVM Hypervisor where it
goes ahead and imposes the silent denials.

The right idea is to follow the kernel.org
commit 1c7de2b4 ("PCI: Enable access to non-standard VPD for
Chelsio devices (cxgb3)") which Alexey Kardashevskiy authored
to establish a PCI Quirk for our T3-based adapters. This commit
extends that PCI Quirk to cover Chelsio T4 devices and later.

The advantage of this approach is that the VPD Size gets set early
in the Base OS/Hypervisor Boot and doesn't require that the cxgb4
driver even be available in the Base OS/Hypervisor.  Thus PF4 can
be exported to a Virtual Machine and everything should work.

Fixes: 67e65879 ("cxgb4: Set VPD size so we can read both VPD structures")
Cc: <stable@vger.kernel.org>  # v4.9+
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set correct size of the CIM LA dump for T6.

Fixes: 27887bc7 ("cxgb4: collect hardware LA dumps")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

free pf 0-3 resources, commit baf50868 ("cxgb4:
restructure VF mgmt code") erroneously removed the
code which frees the pf 0-3 resources, causing the
probe of pf 0-3 to fail in case of driver reload.

Fixes: baf50868 ("cxgb4: restructure VF mgmt code")
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In fib_nh_match(), if output interface or gateway are passed in
the FIB configuration, we don't have to check next hops of
multipath routes to conclude whether we have a match or not.

However, we might still have routes with different realms
matching the same output interface and gateway configuration,
and this needs to cause the match to fail. Otherwise the first
route inserted in the FIB will match, regardless of the realms:

 # ip route add 1.1.1.1 dev eth0 table 1234 realms 1/2
 # ip route append 1.1.1.1 dev eth0 table 1234 realms 3/4
 # ip route list table 1234
 1.1.1.1 dev eth0 scope link realms 1/2
 1.1.1.1 dev eth0 scope link realms 3/4
 # ip route del 1.1.1.1 dev ens3 table 1234 realms 3/4
 # ip route list table 1234
 1.1.1.1 dev ens3 scope link realms 3/4

whereas route with realms 3/4 should have been deleted instead.

Explicitly check for fc_flow passed in the FIB configuration
(this comes from RTA_FLOW extracted by rtm_to_fib_config()) and
fail matching if it differs from nh_tclassid.

The handling of RTA_FLOW for multipath routes later in
fib_nh_match() is still needed, as we can have multiple RTA_FLOW
attributes that need to be matched against the tclassid of each
next hop.

v2: Check that fc_flow is set before discarding the match, so
    that the user can still select the first matching rule by
    not specifying any realm, as suggested by David Ahern.
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The tlv_len is u8, so we need to limit the size of the SDP URI. Enforce
this both in the NLA policy and in the code that performs the allocation
and copy, to avoid writing past the end of the allocated buffer.

Fixes: d9b8d8e1 ("NFC: llcp: Service Name Lookup netlink interface")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Return the TLS record sequence number in getsockopt.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

copy_from_user could copy some partial information, as a result
TLS_CRYPTO_INFO_READY(crypto_info) could be true while crypto_info is
using uninitialzed data.

This patch resets crypto_info when copy_from_user fails.

fixes: 3c4d7559 ("tls: kernel TLS support")
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current code returns four bytes of salt followed by four bytes of IV.
This patch returns all eight bytes of IV.

fixes: 3c4d7559 ("tls: kernel TLS support")
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Axtens says:

====================
Updates to segmentation-offloads.txt

I've been trying to wrap my head around GSO for a while now. This is a
set of small changes to the docs that would probably have been helpful
when I was starting out.

I realise that GSO_DODGY is still a notable omission - I'm hesitant to
write too much on it just yet as I don't understand it well and I
think it's in the process of changing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Most of this is extracted from 90017acc ("sctp: Add GSO support"),
with some extra text about GSO_BY_FRAGS and the need to check for it.

Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The doc originally called it SKB_GSO_REMCSUM. Fix it.

Fixes: f7a6272b ("Documentation: Add documentation for TSO and GSO features")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

UFO is deprecated except for tuntap and packet per 0c19f846,
("net: accept UFO datagrams from tuntap and packet"). Update UFO
docs to reflect this.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ying Xue says:

====================
tipc: Fix missing RTNL lock protection during setting link properties

At present it's unsafe to configure link properties through netlink
as the entire setting process is not under RTNL lock protection. Now
TIPC supports two different sets of netlink APIs at the same time, and
they share the same set of backend functions to configure bearer,
media and net properties. In order to solve the missing RTNL issue,
we have to make the whole __tipc_nl_compat_doit() protected by RTNL,
which means any function called within it cannot take RTNL any more.
So in the series we first introduce the following new functions which
doesn't hold RTNl lock:

 - __tipc_nl_bearer_disable()
 - __tipc_nl_bearer_enable()
 - __tipc_nl_bearer_set()
 - __tipc_nl_media_set()
 - __tipc_nl_net_set()

Meanwhile, __tipc_nl_compat_doit() has been reconstructed to minimize
the time of holding RTNL lock.

Changes in v4:
 - Per suggestion of Kirill Tkhai, divided original big one patch into
   seven small ones so that they can be easily reviewed.

Changes in v3:
 - Optimized return method of __tipc_nl_bearer_enable() regarding
   the comments from David M and Kirill Tkhai
 - Moved the allocations of memory in __tipc_nl_compat_doit() out
   of RTNL lock to minimize the time of holding RTNL lock according
   to the suggestion of Kirill Tkhai.

Changes in v2:
 - The whole operation of setting bearer/media properties has been
   protected under RTNL, as per feedback from David M.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently when user changes link properties, TIPC first checks if
user's command message contains media name or bearer name through
tipc_media_find() or tipc_bearer_find() which is protected by RTNL
lock. But when tipc_nl_compat_link_set() conducts the checking with
the two functions, it doesn't hold RTNL lock at all, as a result,
the following complaints were reported:

audit: type=1400 audit(1514679888.244:9): avc:  denied  { write } for
pid=3194 comm="syzkaller021477" path="socket:[11143]" dev="sockfs"
ino=11143 scontext=unconfined_u:system_r:insmod_t:s0-s0:c0.c1023
tcontext=unconfined_u:system_r:insmod_t:s0-s0:c0.c1023
tclass=netlink_generic_socket permissive=1
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>

=============================
WARNING: suspicious RCU usage
4.15.0-rc5+ #152 Not tainted
-----------------------------
net/tipc/bearer.c:177 suspicious rcu_dereference_protected() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
2 locks held by syzkaller021477/3194:
  #0:  (cb_lock){++++}, at: [<00000000d20133ea>] genl_rcv+0x19/0x40
net/netlink/genetlink.c:634
  #1:  (genl_mutex){+.+.}, at: [<00000000fcc5d1bc>] genl_lock
net/netlink/genetlink.c:33 [inline]
  #1:  (genl_mutex){+.+.}, at: [<00000000fcc5d1bc>] genl_rcv_msg+0x115/0x140
net/netlink/genetlink.c:622

stack backtrace:
CPU: 1 PID: 3194 Comm: syzkaller021477 Not tainted 4.15.0-rc5+ #152
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:17 [inline]
  dump_stack+0x194/0x257 lib/dump_stack.c:53
  lockdep_rcu_suspicious+0x123/0x170 kernel/locking/lockdep.c:4585
  tipc_bearer_find+0x2b4/0x3b0 net/tipc/bearer.c:177
  tipc_nl_compat_link_set+0x329/0x9f0 net/tipc/netlink_compat.c:729
  __tipc_nl_compat_doit net/tipc/netlink_compat.c:288 [inline]
  tipc_nl_compat_doit+0x15b/0x660 net/tipc/netlink_compat.c:335
  tipc_nl_compat_handle net/tipc/netlink_compat.c:1119 [inline]
  tipc_nl_compat_recv+0x112f/0x18f0 net/tipc/netlink_compat.c:1201
  genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:599
  genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:624
  netlink_rcv_skb+0x21e/0x460 net/netlink/af_netlink.c:2408
  genl_rcv+0x28/0x40 net/netlink/genetlink.c:635
  netlink_unicast_kernel net/netlink/af_netlink.c:1275 [inline]
  netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1301
  netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1864
  sock_sendmsg_nosec net/socket.c:636 [inline]
  sock_sendmsg+0xca/0x110 net/socket.c:646
  sock_write_iter+0x31a/0x5d0 net/socket.c:915
  call_write_iter include/linux/fs.h:1772 [inline]
  new_sync_write fs/read_write.c:469 [inline]
  __vfs_write+0x684/0x970 fs/read_write.c:482
  vfs_write+0x189/0x510 fs/read_write.c:544
  SYSC_write fs/read_write.c:589 [inline]
  SyS_write+0xef/0x220 fs/read_write.c:581
  do_syscall_32_irqs_on arch/x86/entry/common.c:327 [inline]
  do_fast_syscall_32+0x3ee/0xf9d arch/x86/entry/common.c:389
  entry_SYSENTER_compat+0x54/0x63 arch/x86/entry/entry_64_compat.S:129

In order to correct the mistake, __tipc_nl_compat_doit() has been
protected by RTNL lock, which means the whole operation of setting
bearer/media properties is under RTNL protection.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reported-by: syzbot <syzbot+6345fd433db009b29413@syzkaller.appspotmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce __tipc_nl_net_set() which doesn't hold RTNL lock.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce __tipc_nl_media_set() which doesn't hold RTNL lock.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce __tipc_nl_bearer_set() which doesn't holding RTNL lock.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce __tipc_nl_bearer_enable() which doesn't hold RTNL lock.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce __tipc_nl_bearer_disable() which doesn't hold RTNL lock.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As preparation for adding RTNL to make (*cmd->transcode)() and
(*cmd->transcode)() constantly protected by RTNL lock, we move out of
memory allocations existing between them as many as possible so that
the time of holding RTNL can be minimized in __tipc_nl_compat_doit().
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Thomas Falcon says:

====================
ibmvnic: Fix memory leaks in the driver

This patch set is pretty self-explanatory. It includes
a number of patches that fix memory leaks found with
kmemleak in the ibmvnic driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

During device close or reset, there were some cases of outstanding
RX socket buffers not being freed. Include a function similar to the
one that already exists to clean TX socket buffers in this case.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If a RX buffer is returned to the client driver with an error, free the
corresponding socket buffer before continuing.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This memory is allocated during initialization but never freed,
so do that now.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During device bringup, the driver exchanges login buffers with
firmware. These buffers contain information such number of TX
and RX queues alloted to the device, RX buffer size, etc. These
buffers weren't being properly freed on device reset or close.

We can free the buffer we send to firmware as soon as we get
a response. There is information in the response buffer that
the driver needs for normal operation so retain it until the
next reset or removal.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pushes back setting the carrier on until the end of the reset
code. This resolves a bug where a watchdog timer was detecting
that a TX queue had stalled before the adapter reset was complete.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit aa136d0c.

As I previously[1] pointed out this implementation of XDP_REDIRECT is
wrong.  XDP_REDIRECT is a facility that must work between different
NIC drivers.  Another NIC driver can call ndo_xdp_xmit/nicvf_xdp_xmit,
but your driver patch assumes payload data (at top of page) will
contain a queue index and a DMA addr, this is not true and worse will
likely contain garbage.

Given you have not fixed this in due time (just reached v4.16-rc1),
the only option I see is a revert.

[1] http://lkml.kernel.org/r/20171211130902.482513d3@redhat.com

Cc: Sunil Goutham <sgoutham@cavium.com>
Cc: Christina Jacob <cjacob@caviumnetworks.com>
Cc: Aleksey Makarov <aleksey.makarov@cavium.com>
Fixes: aa136d0c ("net: thunderx: Add support for xdp redirect")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to fix the file comments in stream.c and
stream_interleave.c

v1->v2:
  rephrase the comment for stream.c according to Neil's suggestion.

Fixes: a8386317 ("sctp: prepare asoc stream for stream reconf")
Fixes: 0c3f6f65 ("sctp: implement make_datafrag for sctp_stream_interleave")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netif_set_real_num_tx_queues() can be called when netdev is up.
That usually happens when user requests change of number of
channels/rings with ethtool -L.  The procedure for changing
the number of queues involves resetting the qdiscs and setting
dev->num_tx_queues to the new value.  When the new value is
lower than the old one, extra care has to be taken to ensure
ordering of accesses to the number of queues vs qdisc reset.

Currently the queues are reset before new dev->num_tx_queues
is assigned, leaving a window of time where packets can be
enqueued onto the queues going down, leading to a likely
crash in the drivers, since most drivers don't check if TX
skbs are assigned to an active queue.

Fixes: e6484930 ("net: allocate tx queues in register_netdevice")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit ebeeb1ad ("rds: tcp: use rds_destroy_pending() to synchronize
netns/module teardown and rds connection/workq management")
adds an rcu read critical section to __rd_conn_create. The
memory allocations in that critcal section need to use
GFP_ATOMIC to avoid sleeping.

This patch was verified with syzkaller reproducer.

Reported-by: syzbot+a0564419941aaae3fe3c@syzkaller.appspotmail.com
Fixes: ebeeb1ad ("rds: tcp: use rds_destroy_pending() to synchronize
       netns/module teardown and rds connection/workq management")
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
net: sched: couple of fixes

This patchset contains couple of fixes following-up the shared block
patchsets.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The offending commit wrongly assumes 1:1 mapping between block and q.
However, there are multiple blocks for a single q for classful qdiscs.
Since the obscure tc_u_common sharing mechanism expects it to be shared
among a qdisc, fix it by storing q pointer in case the block is not
shared.
Reported-by: Paweł Staszewski <pstaszewski@itcare.pl>
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Fixes: 7fa9d974 ("net: sched: cls_u32: use block instead of q in tc_u_common")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is pointless to set block->q for block which are shared among
multiple qdiscs. So remove the assignment in that case. Do a bit of code
reshuffle to make block->index initialized at that point so we can use
tcf_block_shared() helper.
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Fixes: 48617387 ("net: sched: introduce shared filter blocks infrastructure")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since mlxsw_sp_fib_create() and mlxsw_sp_mr_table_create()
use ERR_PTR macro to propagate int err through return of a pointer,
the return value is not NULL in case of failure. So if one
of the calls fails, one of vr->fib4, vr->fib6 or vr->mr4_table
is not NULL and mlxsw_sp_vr_is_used wrongly assumes
that vr is in use which leads to crash like following one:

[ 1293.949291] BUG: unable to handle kernel NULL pointer dereference at 00000000000006c9
[ 1293.952729] IP: mlxsw_sp_mr_table_flush+0x15/0x70 [mlxsw_spectrum]

Fix this by using local variables to hold the pointers and set vr->*
only in case everything went fine.

Fixes: 76610ebb ("mlxsw: spectrum_router: Refactor virtual router handling")
Fixes: a3d9bc50 ("mlxsw: spectrum_router: Extend virtual routers with IPv6 support")
Fixes: d42b0965 ("mlxsw: spectrum_router: Add multicast routes notification handling functionality")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change "minimun" to "minimum".
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes a compile problem of some user space applications by not
including linux/libc-compat.h in uapi/if_ether.h.

linux/libc-compat.h checks which "features" the header files, included
from the libc, provide to make the Linux kernel uapi header files only
provide no conflicting structures and enums. If a user application mixes
kernel headers and libc headers it could happen that linux/libc-compat.h
gets included too early where not all other libc headers are included
yet. Then the linux/libc-compat.h would not prevent all the
redefinitions and we run into compile problems.
This patch removes the include of linux/libc-compat.h from
uapi/if_ether.h to fix the recently introduced case, but not all as this
is more or less impossible.

It is no problem to do the check directly in the if_ether.h file and not
in libc-compat.h as this does not need any fancy glibc header detection
as glibc never provided struct ethhdr and should define
__UAPI_DEF_ETHHDR by them self when they will provide this.

The following test program did not compile correctly any more:

#include <linux/if_ether.h>
#include <netinet/in.h>
#include <linux/in.h>

int main(void)
{
	return 0;
}

Fixes: 6926e041 ("uapi/if_ether.h: prevent redefinition of struct ethhdr")
Reported-by: Guillaume Nault <g.nault@alphalink.fr>
Cc: <stable@vger.kernel.org> # 4.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prevent a kernel panic on reboot if ptp_clock is NULL by checking
the ptp pointer before using it.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Fixes: 8c56df37 ("net: add support for Cavium PTP coprocessor")
Cc: Radoslaw Biernacki <rad@semihalf.com>
Cc: Aleksey Makarov <aleksey.makarov@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The control channel calls registered callbacks when control messages
such as XDomain protocol messages are received. The control channel
handling is done in a worker running on system workqueue which means the
networking driver can't run tear down flow which includes sending
disconnect request and waiting for a reply in the same worker. Otherwise
reply is never received (as the work is already running) and the
operation times out.

To fix this run disconnect ThunderboltIP flow asynchronously once
ThunderboltIP logout message is received.

Fixes: e69b6c02 ("net: Add support for networking over Thunderbolt cable")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>