- 15 Mar, 2022 2 commits
-
-
Leilk Liu authored
This patch adds dt-binding documentation for MT7986. Signed-off-by:
Leilk Liu <leilk.liu@mediatek.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220315032411.2826-3-leilk.liu@mediatek.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Leilk Liu authored
this patch support tick_delay bit[31:30] without enhance_timing feature. Fixes: f84d866a("spi: mediatek: add tick_delay support") Signed-off-by:
-
- 11 Mar, 2022 1 commit
-
-
Kuldeep Singh authored
PL022 has two input clocks named sspclk and apb_pclk. Current schema refers to two notations of sspclk which are indeed same and thus one can be dropped. Update clock-names property to reflect the same. Signed-off-by:
Kuldeep Singh <singh.kuldeep87k@gmail.com> Link: https://lore.kernel.org/r/20220309171847.5345-1-singh.kuldeep87k@gmail.comSigned-off-by:
-
- 10 Mar, 2022 1 commit
-
-
Yihao Han authored
Remove dev_err() messages after platform_get_irq*() failures. platform_get_irq() already prints an error. Generated by: scripts/coccinelle/api/platform_get_irq.cocci Signed-off-by:
Yihao Han <hanyihao@vivo.com> Link: https://lore.kernel.org/r/20220310094806.13734-1-hanyihao@vivo.comSigned-off-by:
-
- 08 Mar, 2022 7 commits
-
-
Mark Brown authored
Merge series from Alim Akhtar: This series adds support for the SPI controller in the Tesla FSD SoC, also pulling in: git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ib-mfd-spi-dt-v5.18 from the MFD tree which has dependencies for the DT bindings.
-
Alim Akhtar authored
Add compatible and port configuration for spi controller for Tesla Full Self-Driving SoC. Cc: linux-fsd@tesla.com Signed-off-by:
Aswani Reddy <aswani.reddy@samsung.com> Signed-off-by:
Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by:
Andi Shyti <andi@etezian.org> Link: https://lore.kernel.org/r/20220308121640.27344-2-alim.akhtar@samsung.comSigned-off-by:
-
Alim Akhtar authored
Adds spi controller dt-binding compatible information for Tesla Full Self-Driving (FSD) SoC. Cc: linux-fsd@tesla.com Signed-off-by:
Adithya K V <adithya.kv@samsung.com> Signed-off-by:
-
Mark Brown authored
Merge series from Krishna Yarlagadda <kyarlagadda@nvidia.com>: Add ACPI support for Tegra210 QUAD SPI driver Support new Tegra194 feature, combined sequence mode.
-
Andy Shevchenko authored
DMA device is expected to be available while SPI transfer is ongoing. Prevent usage of potentially stale DMA device by keeping reference count till the end of the transfer. Fixes: 4d986ffa ("spi: add missing pci_dev_put() before return") Reported-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220307173740.80996-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Krishna Yarlagadda authored
Add combined sequence mode supported by Tegra QSPI controller. For commands which contain cmd, addr, data parts to it, controller can accept all 3 transfers at once and avoid interrupt for each transfer. This would improve read & write performance. Signed-off-by:
Krishna Yarlagadda <kyarlagadda@nvidia.com> Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220307165519.38380-3-kyarlagadda@nvidia.comSigned-off-by:
-
Krishna Yarlagadda authored
Add ACPI ID for Tegra QUAD SPI. Switch to common device property calls. Skip clock calls that are not updated in ACPI boot. Runtime PM support is not yet enabled with ACPI boot. Signed-off-by:
-
- 07 Mar, 2022 18 commits
-
-
Jonathan Neuschäfer authored
The platform is called NPCM, not NPXM. Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20220306142312.109017-1-j.neuschaefer@gmx.netSigned-off-by:
-
Jon Hunter authored
When running dt_binding_check on the nvidia,tegra210-quad.yaml binding document the following error is reported ... nvidia,tegra210-quad.example.dt.yaml:0:0: /example-0/spi@70410000/flash@0: failed to match any schema with compatible: ['spi-nor'] Update the example in the binding document to fix the above error. Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Fixes: 9684752e ("dt-bindings: spi: Add Tegra Quad SPI device tree binding") Link: https://lore.kernel.org/r/20220307113529.315685-1-jonathanh@nvidia.comSigned-off-by:
-
Xingbang Liu authored
The code has been in a irq-disabled context since it is hard IRQ. There is no necessity to do it again. Signed-off-by:
Xingbang Liu <liu.airalert@gmail.com> Link: https://lore.kernel.org/r/20220302071521.6638-1-liu.airalert@gmail.comSigned-off-by:
-
Yihao Han authored
Remove dev_err() messages after platform_get_irq*() failures. platform_get_irq() already prints an error. Generated by: scripts/coccinelle/api/platform_get_irq.cocci Signed-off-by:
-
Kuldeep Singh authored
Add Han Xu as flexspi maintainer. Also, update my email address as previous one is not working anymore. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220302192915.6193-1-singh.kuldeep87k@gmail.comSigned-off-by:
-
Krzysztof Kozlowski authored
Convert the MFD part of Maxim MAX77802 PMIC to DT schema format. The example DTS was copied from existing DTS (exynos5800-peach-pi.dts), so keep the license as GPL-2.0-only. Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220215075344.31421-3-krzysztof.kozlowski@canonical.com
-
Krzysztof Kozlowski authored
Convert the regulators of Maxim MAX77802 PMIC to DT schema format. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert the MFD part of Maxim MAX14577/MAX77836 MUIC to DT schema format. The example DTS was copied from existing DTS (exynos3250-rinato.dts), so keep the license as GPL-2.0-only. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert the regulator bindings of Maxim MAX14577/MAX77835 MUIC to DT schema format. The existing bindings were defined in ../bindings/mfd/max14577.txt. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert the Charger bindings of Maxim MAX14577/MAX77836 MUIC to DT schema format. The existing bindings were defined in ../bindings/mfd/max14577.txt. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The Samsung SoC SPI driver requires to provide controller-data node for each of SPI peripheral device nodes. Make this controller-data node optional, so DTS could be simpler. Suggested-by:
Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by:
-
Krzysztof Kozlowski authored
Correct level of indentation in the example. Signed-off-by:
-
Krzysztof Kozlowski authored
The ChromeOS Embedded Controller appears on boards with Samsung Exynos SoC, where Exynos SPI bindings expect controller-data node. Reference SPI peripheral bindings which include now Samsung SPI peripheral parts. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert the Samsung SoC (S3C24xx, S3C64xx, S5Pv210, Exynos) SPI controller bindings to DT schema format. The conversion also drops requirement from providing controller-data and its data for each of SPI peripheral device nodes. The dtschema cannot express this and the requirement is being relaxed in the driver now. Signed-off-by:
Pratyush Yadav <p.yadav@ti.com> Reviewed-by:
-
Krzysztof Kozlowski authored
The MAX77843 is used in Exynos5433-based TM2 boards and shares some parts of code with MAX77693 (regulator and haptic motor drivers). Include all MAX77843 drivers in the entry for Maxim PMIC/MUIC drivers for Exynos boards, so they will receive some dedicated review coverage. Signed-off-by:
-
Krzysztof Kozlowski authored
Document the bindings for MAX77843 MFD driver, based on Exynos5433 TM2 devicetree. These are neither accurate nor finished bindings but at least allow parsing existing DTS files. The example DTS was copied from existing DTS (exynos5433-tm2-common.dtsi), so keep the license as GPL-2.0-only. Signed-off-by:
-
Krzysztof Kozlowski authored
Document the bindings for MAX77843 regulator driver. The bindings are almost identical to MAX77693 bindings, except the actual names of regulators. Signed-off-by:
-
Krzysztof Kozlowski authored
Document the bindings for MAX77843 MUIC/extcon driver, based on Exynos5433 TM2 devicetree. These are neither accurate nor finished bindings but at least allow parsing existing DTS files. Signed-off-by:
-
- 03 Mar, 2022 1 commit
-
-
Minghao Chi (CGEL ZTE) authored
Use of_device_get_match_data() to simplify the code. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220303092131.2060044-1-chi.minghao@zte.com.cnSigned-off-by:
-
- 02 Mar, 2022 3 commits
-
-
Jiasheng Jiang authored
As the potential failure of the dma_set_mask(), it should be better to check it and return error if fails. Fixes: 126bdb60 ("spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220302092051.121343-1-jiasheng@iscas.ac.cnSigned-off-by:
-
Rob Herring authored
The minimum array length defaults to the same size as the maximum. For 'mediatek,pad-select', the example has a length of 2 and in-tree .dts files have a length of 1, but the schema says the length must be 4. There's currently no warning in the example because the schema fixups are not handling this case correctly. Signed-off-by:
-
Lad Prabhakar authored
Drop comment "# RZ/A and RZ/G2{L,LC}" for generic compatible string "renesas,rspi-rz" as this will avoid changing the line for every new SoC addition. Suggested-by:Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220301134244.20174-1-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by:
-
- 28 Feb, 2022 7 commits
-
-
Lad Prabhakar authored
Add RSPI binding documentation for Renesas RZ/V2L SoC. RSPI block is identical to one found on RZ/A, so no driver changes are required. The fallback compatible string "renesas,rspi-rz" will be used on RZ/V2L. Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Acked-by:
-
Yun Zhou authored
Commit d40f0b6f instroduced last_cs_enable to avoid setting chipselect if it's not necessary, but it also introduces a bug. The chipselect may not be set correctly on multi-device SPI busses. The reason is that we can't judge the chipselect by bool last_cs_enable, since chipselect may be modified after other devices were accessed. So we should record the specific state of chipselect in case of confusion. Signed-off-by:
Yun Zhou <yun.zhou@windriver.com> Link: https://lore.kernel.org/r/20220217141234.72737-1-yun.zhou@windriver.comSigned-off-by:
-
Andy Shevchenko authored
Now when there are no dynamical changes required, we may constify struct pxa_spi_info variables. Signed-off-by:
-
Andy Shevchenko authored
Instead of using temporary storage, assign the values directly to the corresponding struct pxa2xx_spi_controller members. Signed-off-by:
-
Andy Shevchenko authored
Extract pxa2xx_spi_pci_clk_register() from ->probe() in order to reuse it later on for getting rid of max_clk_rate temporary storage. Signed-off-by:
-
Andy Shevchenko authored
All of the LPSS devices are using DMA and set the parameters up, hence no need to test for that. Signed-off-by:
-
Andy Shevchenko authored
Instead of creating an abstraction on top of PCI IDs, just use them directly. The corresponding enum can be dropped. Signed-off-by:
-
