- 23 Jul, 2014 16 commits
-
-
Mauro Carvalho Chehab authored
The firmware name at: http://www.kernellabs.com/firmware/xc4000/ Is different from the one at the Kernel. Update it try first the new name, falling back to the previous one if the new name can't be found. Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Himangi Saraogi authored
This patch removes the null test on ch. ch is initialized at the beginning of the function to &demod->dtv_property_cache. Since demod is dereferenced prior to the null test, demod must be a valid pointer, and &demod->dtv_property_cache cannot be null. The following Coccinelle script is used for detecting the change: @r@ expression e,f; identifier g,y; statement S1,S2; @@ *e = &f->g <+... f->y ...+> *if (e != NULL || ...) S1 else S2 Signed-off-by:
Himangi Saraogi <himangi774@gmail.com> Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Mauro Carvalho Chehab authored
Instead of looking at the guard interval field, it was using the interval length, with is wrong. Fix it. Signed-off-by: -
Mauro Carvalho Chehab authored
Interleaving code was wrong at mb86a20s: instead, it was looking at the Guard Interval. Fix it. Signed-off-by: -
Mauro Carvalho Chehab authored
The driver was reporting an incorrect mode, when mode 2 is selected. While testing it, noticed that neither mode 1 or guard interval 1/32 is supported by this device. Document it, and ensure that it will report _AUTO when it doesn't lock, in order to not report a wrong detection to userspace. Signed-off-by: -
Antti Palosaari authored
Implement read_ber for BER estimate. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
There was 32-bit calculation overflow. Use div_u64. Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Cc: Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Cc: Antti Palosaari <crope@iki.fi> Cc: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Emil Goode authored
This cleans up some line over 80 character violations. Signed-off-by:
Emil Goode <emilgoode@gmail.com> Signed-off-by:
-
Emil Goode authored
This removes checks of struct member addresses since they likely result in the condition always being true. Also in the stb6100_get_bandwidth and tda8261_get_bandwidth functions the pointers frontend_ops and tuner_ops are assigned the same addresses twice. Signed-off-by:
-
Heinrich Schuchardt authored
This updated patch also fixes out of bound access to b[]. In dib9000_risc_apb_access_write() an out of bound access to mb[]. The current test to avoid out of bound access to mb[] is insufficient. For len = 19 non-existent mb[10] will be accessed. For odd values of len b[] is accessed out of bounds. For large values of len an of bound access to mb[] may occur in dib9000_mbx_send_attr. Signed-off-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Dan Carpenter authored
>From the context this should be hex 0x80 instead of decimal 80. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 22 Jul, 2014 24 commits
-
-
Mauro Carvalho Chehab authored
changeset a733291d didn't merge the fixes well. It ended by restoring some bad logic removed there. Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by Kbuildtest: warning: (VIDEO_PVRUSB2 && VIDEO_TLG2300 && VIDEO_USBVISION && VIDEO_GO7007 && VIDEO_AU0828_V4L2 && VIDEO_CX231XX && VIDEO_TM6000 && VIDEO_EM28XX && VIDEO_IVTV && VIDEO_MXB && VIDEO_CX18 && VIDEO_CX23885 && VIDEO_CX88 && VIDEO_BT848 && VIDEO_SAA7134 && VIDEO_SAA7164) selects VIDEO_TUNER which has unmet direct dependencies (MEDIA_SUPPORT && MEDIA_TUNER) That happens when: # CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y # CONFIG_MEDIA_RADIO_SUPPORT is not set # CONFIG_MEDIA_SDR_SUPPORT is not set CONFIG_VIDEO_AU0828_V4L2=y CONFIG_VIDEO_CX231XX=y CONFIG_VIDEO_TM6000=y CONFIG_VIDEO_EM28XX=y CONFIG_VIDEO_TUNER=y CONFIG_MEDIA_SUPPORT=y With means that we need to enable MEDIA_TUNER also when DTV is enabled. While the above config doesn't cover, if we enable SDR, the same error can also happen. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Hans Verkuil authored
Now that the custom motion detection API in this driver has been replaced with a standard API there is no reason anymore to keep it in staging. So (finally!) move it to drivers/media/usb. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Hans Verkuil authored
Now that the custom motion detection API has been replaced with a standard API there is no reason anymore to keep it in staging. So (finally!) move it to drivers/media/pci. Signed-off-by:
-
Philipp Zabel authored
Similarly to workbuf_size and tempbuf_size, store iram_size in the coda_devtype structure. This also decreases the IRAM used on i.MX6DL to 128 KiB. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Philipp Zabel authored
Similarly to the work buffer size, store the temporary buffer size in the coda_devtype structure. Signed-off-by:
-
Philipp Zabel authored
We had the workbuf_size field since the beginning. Use it to tighten the code a little bit. Signed-off-by:
-
Philipp Zabel authored
This patch exports all auxiliary buffers, including SRAM, as debugfs binary blobs for debugging purposes. It shows, for example, that psbuf currently doesn't seem to be used at all on CODA7541, and that slicebuf and workbuf usage is far from the maximum. It can also be used to validate SRAM size allocation. Signed-off-by:
-
Philipp Zabel authored
When encoding into h.264, the input frame stride needs to be a multiple of 16. During allocation of the input buffers, it may not be known yet whether the encoder should create h.264 or not. Assume the worst and always use a frame stride that is a multiple of 16. Signed-off-by:
-
Philipp Zabel authored
CODA7541 only supports encoding h.264 frames with width and height that are multiples of the macroblock size. Signed-off-by:
-
Philipp Zabel authored
Even though the CODA h.264 decoder always decodes complete macroblocks, we can set the stride to the corresponding multiple of 16 and use a value smaller than that as real width. Unfortunately the same doesn't work for height, as there is no vertical linesperframe stride for discontiguous planar YUV frames. Signed-off-by:
-
Philipp Zabel authored
bytesperline is calculated in multiple places, store it in the coda_q_data structure. This will be more useful later when adding JPEG support. Signed-off-by:
-
Philipp Zabel authored
On i.MX53 and i.MX6, the CODA VPU can be reset by the System Reset Controller. We can use this to get out of dire situations, for example after a picture run timeout. Signed-off-by:
-
Philipp Zabel authored
Rename the per-context prescan_failed variable to hold, as this is what the flag does: it temporarily keeps the coda from running until new data is fed into the bitstream buffer or stop_streaming is called on the input side. A prescan failure on i.MX5 is one possible reason to enter this state, another one is a picture run timeout on i.MX6. Signed-off-by:
-
Philipp Zabel authored
The coda h.264 decoder also counts PIC_RUNs where no frame was decoded but a frame was rotated out / marked as ready to be displayed. This causes an offset between the incoming encoded frame's sequence number and the decode sequence number returned by the coda. This patch introduces a sequence counter offset variable to keep track of the difference. Signed-off-by:
-
Philipp Zabel authored
If the CODA reports macroblock errors, also set the VB2_BUF_STATE_ERROR flag to alert userspace. Signed-off-by:
-
Philipp Zabel authored
The coda driver advertises timestamp_type V4L2_BUF_FLAG_TIMESTAMP_COPY on both queues, so we have to copy timestamps from input v4l2 buffers to the corresponding destination v4l2 buffers. Since the h.264 decoder can reorder frames, a timestamp queue is needed to keep track of and assign the correct timestamp to destination buffers. Signed-off-by:
-
Michael Olbrich authored
In case no further buffers are queued after the stop command, restart job scheduling explicitly. Signed-off-by:
Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by:
-
Michael Olbrich authored
Some drivers might allow to decode remaining frames from an internal ringbuffer after a decoder stop command. Allow those to call v4l2_m2m_try_schedule directly. Signed-off-by:
-
Philipp Zabel authored
Allow userspace to enable cyclic intra refresh by setting the number of intra macroblocks per frame to a non-zero value. Signed-off-by:
-
Philipp Zabel authored
This adds controls for the h.264 deblocking loop filter. Signed-off-by:
-
Philipp Zabel authored
If the bitrate control is set, the encoder works in CBR mode, dynamically changing the quantization parameters to achieve a constant bitrate. With the min/max QP controls the quantization parameters can be limited to a given range. Signed-off-by:
-
Philipp Zabel authored
The driver uses the genalloc API, which doesn't have stubs in case GENERIC_ALLOCATOR is disabled. Signed-off-by:
-
Philipp Zabel authored
This adds a new function coda_check_firmware that does the firmware version checks so that this can be done only once from coda_probe instead of every time the runtime pm framework resumes the coda. Signed-off-by:
-
