- 10 Sep, 2018 39 commits
-
-
Stefan Bader authored
BugLink: https://bugs.launchpad.net/bugs/1791080 At the time we backported "x86/bugs: Expose /sys/../spec_store_bypass" there was no definition for Knights Mill Atom CPUs. This was added later when doing L1TF but we did not update the list of CPUs not affected by SSB. Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Stefan Bader authored
BugLink: https://bugs.launchpad.net/bugs/1791080 Merging with upstream stable 4.4.y introduced 3 new inline functions which were modified by "x86/bugs: Read SPEC_CTRL MSR during boot and re-use reserved bits". Things changed in later patches, so I am picking up the final state as seen in 4.4.154. Signed-off-by:
-
David Woodhouse authored
BugLink: https://bugs.launchpad.net/bugs/1791080 commit def9331a upstream When running as Xen pv guest X86_BUG_SYSRET_SS_ATTRS must not be set on AMD cpus. This bug/feature bit is kind of special as it will be used very early when switching threads. Setting the bit and clearing it a little bit later leaves a critical window where things can go wrong. This time window has enlarged a little bit by using setup_clear_cpu_cap() instead of the hypervisor's set_cpu_features callback. It seems this larger window now makes it rather easy to hit the problem. The proper solution is to never set the bit in case of Xen. Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Srivatsa S. Bhat <srivatsa@csail.mit.edu> Reviewed-by:
Matt Helsley (VMware) <matt.helsley@gmail.com> Reviewed-by:
Alexey Makhalov <amakhalov@vmware.com> Reviewed-by:
Bo Gan <ganb@vmware.com> Signed-off-by:
-
Juergen Gross authored
BugLink: https://bugs.launchpad.net/bugs/1791080 Upstream commit: 0808e80c ("xen: set cpu capabilities from xen_start_kernel()") There is no need to set the same capabilities for each cpu individually. This can easily be done for all cpus when starting the kernel. Signed-off-by:
-
Mickaël Salaün authored
BugLink: https://bugs.launchpad.net/bugs/1791080 commit 505ce68c upstream Signed-off-by:
Mickaël Salaün <mic@digikod.net> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Kees Cook <keescook@chromium.org> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Will Drewry <wad@chromium.org> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Ingo Molnar authored
BugLink: https://bugs.launchpad.net/bugs/1791080 commit d72f4e29 upstream. firmware_restrict_branch_speculation_*() recently started using preempt_enable()/disable(), but those are relatively high level primitives and cause build failures on some 32-bit builds. Since we want to keep <asm/nospec-branch.h> low level, convert them to macros to avoid header hell... Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: arjan.van.de.ven@intel.com Cc: bp@alien8.de Cc: dave.hansen@intel.com Cc: jmattson@google.com Cc: karahmed@amazon.de Cc: kvm@vger.kernel.org Cc: pbonzini@redhat.com Cc: rkrcmar@redhat.com Cc: linux-kernel@vger.kernel.org Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
David Woodhouse authored
BugLink: https://bugs.launchpad.net/bugs/1791080 commit dd84441a upstream. Retpoline means the kernel is safe because it has no indirect branches. But firmware isn't, so use IBRS for firmware calls if it's available. Block preemption while IBRS is set, although in practice the call sites already had to be doing that. Ignore hpwdt.c for now. It's taking spinlocks and calling into firmware code, from an NMI handler. I don't want to touch that with a bargepole. Signed-off-by:
-
Tim Chen authored
BugLink: https://bugs.launchpad.net/bugs/1791080 commit 18bf3c3e upstream. Flush indirect branches when switching into a process that marked itself non dumpable. This protects high value processes like gpg better, without having too high performance overhead. If done naïvely, we could switch to a kernel idle thread and then back to the original process, such as: process A -> idle -> process A In such scenario, we do not have to do IBPB here even though the process is non-dumpable, as we are switching back to the same process after a hiatus. To avoid the redundant IBPB, which is expensive, we track the last mm user context ID. The cost is to have an extra u64 mm context id to track the last mm we were using before switching to the init_mm used by idle. Avoiding the extra IBPB is probably worth the extra memory for this common scenario. For those cases where tlb_defer_switch_to_init_mm() returns true (non PCID), lazy tlb will defer switch to init_mm, so we will not be changing the mm for the process A -> idle -> process A switch. So IBPB will be skipped for this case. Thanks to the reviewers and Andy Lutomirski for the suggestion of using ctx_id which got rid of the problem of mm pointer recycling. Signed-off-by:
Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by:
-
Andy Lutomirski authored
BugLink: https://bugs.launchpad.net/bugs/1791080 commit f39681ed upstream. This adds two new variables to mmu_context_t: ctx_id and tlb_gen. ctx_id uniquely identifies the mm_struct and will never be reused. For a given mm_struct (and hence ctx_id), tlb_gen is a monotonic count of the number of times that a TLB flush has been requested. The pair (ctx_id, tlb_gen) can be used as an identifier for TLB flush actions and will be used in subsequent patches to reliably determine whether all needed TLB flushes have occurred on a given CPU. This patch is split out for ease of review. By itself, it has no real effect other than creating and updating the new variables. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Reviewed-by:
Nadav Amit <nadav.amit@gmail.com> Reviewed-by:
-
Dave Hansen authored
BugLink: https://bugs.launchpad.net/bugs/1791080 commit 39a0526f upstream The arch-specific mm_context_t is a great place to put protection-key allocation state. But, we need to initialize the allocation state because pkey 0 is always "allocated". All of the runtime initialization of mm_context_t is done in *_ldt() manipulation functions. This renames the existing LDT functions like this: init_new_context() -> init_new_context_ldt() destroy_context() -> destroy_context_ldt() and makes init_new_context() and destroy_context() available for generic use. Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by:
-
Juergen Gross authored
BugLink: https://bugs.launchpad.net/bugs/1791080 commit 71c208dd upstream. Older Xen versions (4.5 and before) might have problems migrating pv guests with MSR_IA32_SPEC_CTRL having a non-zero value. So before suspending zero that MSR and restore it after being resumed. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Cc: xen-devel@lists.xenproject.org Cc: boris.ostrovsky@oracle.com Link: https://lkml.kernel.org/r/20180226140818.4849-1-jgross@suse.comSigned-off-by:
-
Dan Williams authored
BugLink: https://bugs.launchpad.net/bugs/1791080 commit be3233fb upstream. Allow the compiler to handle @size as an immediate value or memory directly rather than allocating a register. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/151797010204.1289.1510000292250184993.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
-
Ingo Molnar authored
BugLink: https://bugs.launchpad.net/bugs/1791080 commit 21e433bd upstream. Harmonize all the Spectre messages so that a: dmesg | grep -i spectre ... gives us most Spectre related kernel boot messages. Also fix a few other details: - clarify a comment about firmware speculation control - s/KPTI/PTI - remove various line-breaks that made the code uglier Acked-by:
-
Dan Williams authored
BugLink: https://bugs.launchpad.net/bugs/1791080 commit 6b8cf5cc upstream. At entry userspace may have populated registers with values that could otherwise be useful in a speculative execution attack. Clear them to minimize the kernel's attack surface. Originally-From: Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Denys Vlasenko authored
BugLink: https://bugs.launchpad.net/bugs/1791080 commit 778843f9 upstream Use of a temporary R8 register here seems to be unnecessary. "push %r8" is a two-byte insn (it needs REX prefix to specify R8), "push $0" is two-byte too. It seems just using the latter would be no worse. Thus, code had an unnecessary "xorq %r8,%r8" insn. It probably costs nothing in execution time here since we are probably limited by store bandwidth at this point, but still. Run-tested under QEMU: 32-bit calls still work: / # ./test_syscall_vdso32 [RUN] Executing 6-argument 32-bit syscall via VDSO [OK] Arguments are preserved across syscall [NOTE] R11 has changed:0000000000200ed7 - assuming clobbered by SYSRET insn [OK] R8..R15 did not leak kernel data [RUN] Executing 6-argument 32-bit syscall via INT 80 [OK] Arguments are preserved across syscall [OK] R8..R15 did not leak kernel data [RUN] Running tests under ptrace [RUN] Executing 6-argument 32-bit syscall via VDSO [OK] Arguments are preserved across syscall [NOTE] R11 has changed:0000000000200ed7 - assuming clobbered by SYSRET insn [OK] R8..R15 did not leak kernel data [RUN] Executing 6-argument 32-bit syscall via INT 80 [OK] Arguments are preserved across syscall [OK] R8..R15 did not leak kernel data Signed-off-by:
Denys Vlasenko <dvlasenk@redhat.com> Acked-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1791080 (cherry picked from commit 4bf5d56d) I'm seeing build failures from the two newly introduced arrays that are marked 'const' and '__initdata', which are mutually exclusive: arch/x86/kernel/cpu/common.c:882:43: error: 'cpu_no_speculation' causes a section type conflict with 'e820_table_firmware_init' arch/x86/kernel/cpu/common.c:895:43: error: 'cpu_no_meltdown' causes a section type conflict with 'e820_table_firmware_init' The correct annotation is __initconst. Fixes: fec9434a ("x86/pti: Do not enable PTI on CPUs which are not vulnerable to Meltdown") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
David Woodhouse authored
BugLink: https://bugs.launchpad.net/bugs/1791080 Expose indirect_branch_prediction_barrier() for use in subsequent patches. Our approach for IBRS/IBPB is still based on the Intel v4 patchset and I did not want to completely switch that in this upstream stable set. For that reason I skipped most changes from "x86/speculation: Add basic IBPB (Indirect Branch Prediction Barrier) support" from the 4.4.144 update. Only indirect_branch_prediction_barrier() I picked up because it will later be used for an update to "x86/speculation: Use Indirect Branch Prediction Barrier in context switch". Signed-off-by:
-
Stefan Bader authored
BugLink: https://bugs.launchpad.net/bugs/1791080 The 4.4.144 backport of this patch adds the bit definitions for two AVX-512 features: X86_FEATURE_AVX512_4VNNIW and X86_FEATURE_AVX512_4FMAPS. Those bits were not defined before in 4.4, but pick them up to be in sync with upstream stable. Fixes: e8e6c1d5 "x86/cpufeatures: Add CPUID_7_EDX CPUID leaf" Signed-off-by:
-
Nick Desaulniers authored
BugLink: https://bugs.launchpad.net/bugs/1791080 commit d0a8d937 upstream. native_save_fl() is marked static inline, but by using it as a function pointer in arch/x86/kernel/paravirt.c, it MUST be outlined. paravirt's use of native_save_fl() also requires that no GPRs other than %rax are clobbered. Compilers have different heuristics which they use to emit stack guard code, the emittance of which can break paravirt's callee saved assumption by clobbering %rcx. Marking a function definition extern inline means that if this version cannot be inlined, then the out-of-line version will be preferred. By having the out-of-line version be implemented in assembly, it cannot be instrumented with a stack protector, which might violate custom calling conventions that code like paravirt rely on. The semantics of extern inline has changed since gnu89. This means that folks using GCC versions >= 5.1 may see symbol redefinition errors at link time for subdirs that override KBUILD_CFLAGS (making the C standard used implicit) regardless of this patch. This has been cleaned up earlier in the patch set, but is left as a note in the commit message for future travelers. Reports: https://lkml.org/lkml/2018/5/7/534 https://github.com/ClangBuiltLinux/linux/issues/16 Discussion: https://bugs.llvm.org/show_bug.cgi?id=37512 https://lkml.org/lkml/2018/5/24/1371 Thanks to the many folks that participated in the discussion. [Backport for 4.4. 4.4 is missing commit 784d5699 "x86: move exports to actual definitions" which doesn't apply cleanly, and not really worth backporting IMO. It's simpler to change this patch from upstream: + #include <asm-generic/export.h> rather than + #include <asm/export.h>] Debugged-by:
Alistair Strachan <astrachan@google.com> Debugged-by:
Matthias Kaehlcke <mka@chromium.org> Suggested-by:
H. Peter Anvin <hpa@zytor.com> Suggested-by:
Tom Stellar <tstellar@redhat.com> Reported-by:
Sedat Dilek <sedat.dilek@gmail.com> Tested-by:
Nick Desaulniers <ndesaulniers@google.com> Acked-by:
-
Mathias Nyman authored
BugLink: https://bugs.launchpad.net/bugs/1791080 commit 229bc19f upstream. Don't rely on event interrupt (EINT) bit alone to detect pending port change in resume. If no change event is detected the host may be suspended again, oterwise roothubs are resumed. There is a lag in xHC setting EINT. If we don't notice the pending change in resume, and the controller is runtime suspeded again, it causes the event handler to assume host is dead as it will fail to read xHC registers once PCI puts the controller to D3 state. [ 268.520969] xhci_hcd: xhci_resume: starting port polling. [ 268.520985] xhci_hcd: xhci_hub_status_data: stopping port polling. [ 268.521030] xhci_hcd: xhci_suspend: stopping port polling. [ 268.521040] xhci_hcd: // Setting command ring address to 0x349bd001 [ 268.521139] xhci_hcd: Port Status Change Event for port 3 [ 268.521149] xhci_hcd: resume root hub [ 268.521163] xhci_hcd: port resume event for port 3 [ 268.521168] xhci_hcd: xHC is not running. [ 268.521174] xhci_hcd: handle_port_status: starting port polling. [ 268.596322] xhci_hcd: xhci_hc_died: xHCI host controller not responding, assume dead The EINT lag is described in a additional note in xhci specs 4.19.2: "Due to internal xHC scheduling and system delays, there will be a lag between a change bit being set and the Port Status Change Event that it generated being written to the Event Ring. If SW reads the PORTSC and sees a change bit set, there is no guarantee that the corresponding Port Status Change Event has already been written into the Event Ring." Cc: <stable@vger.kernel.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Stefano Brivio authored
BugLink: https://bugs.launchpad.net/bugs/1791080 [ Upstream commit e78bfb07 ] Commit 8b700862 ("net: Don't copy pfmemalloc flag in __copy_skb_header()") introduced a different handling for the pfmemalloc flag in copy and clone paths. In __skb_clone(), now, the flag is set only if it was set in the original skb, but not cleared if it wasn't. This is wrong and might lead to socket buffers being flagged with pfmemalloc even if the skb data wasn't allocated from pfmemalloc reserves. Copy the flag instead of ORing it. Reported-by:
Sabrina Dubroca <sd@queasysnail.net> Fixes: 8b700862 ("net: Don't copy pfmemalloc flag in __copy_skb_header()") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Tested-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Stefano Brivio authored
BugLink: https://bugs.launchpad.net/bugs/1791080 [ Upstream commit 8b700862 ] The pfmemalloc flag indicates that the skb was allocated from the PFMEMALLOC reserves, and the flag is currently copied on skb copy and clone. However, an skb copied from an skb flagged with pfmemalloc wasn't necessarily allocated from PFMEMALLOC reserves, and on the other hand an skb allocated that way might be copied from an skb that wasn't. So we should not copy the flag on skb copy, and rather decide whether to allow an skb to be associated with sockets unrelated to page reclaim depending only on how it was allocated. Move the pfmemalloc flag before headers_start[0] using an existing 1-bit hole, so that __copy_skb_header() doesn't copy it. When cloning, we'll now take care of this flag explicitly, contravening to the warning comment of __skb_clone(). While at it, restore the newline usage introduced by commit b1937227 ("net: reorganize sk_buff for faster __copy_skb_header()") to visually separate bytes used in bitfields after headers_start[0], that was gone after commit a9e419dc ("netfilter: merge ctinfo into nfct pointer storage area"), and describe the pfmemalloc flag in the kernel-doc structure comment. This doesn't change the size of sk_buff or cacheline boundaries, but consolidates the 15 bits hole before tc_index into a 2 bytes hole before csum, that could now be filled more easily. Reported-by:
Patrick Talbert <ptalbert@redhat.com> Fixes: c93bdd0e ("netvm: allow skb allocation to use PFMEMALLOC reserves") Signed-off-by:
-
Sanjeev Bansal authored
BugLink: https://bugs.launchpad.net/bugs/1791080 [ Upstream commit 3a498606 ] This patch has fix for TX timeout while running bi-directional traffic with 100 Mbps using 5762. Signed-off-by:
Sanjeev Bansal <sanjeevb.bansal@broadcom.com> Signed-off-by:
Siva Reddy Kallam <siva.kallam@broadcom.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Gustavo A. R. Silva authored
BugLink: https://bugs.launchpad.net/bugs/1791080 [ Upstream commit 9ba8376c ] It seems that a *break* is missing in order to avoid falling through to the default case. Otherwise, checking *chan* makes no sense. Fixes: 72df7a72 ("ptp: Allow reassigning calibration pin function") Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
BugLink: https://bugs.launchpad.net/bugs/1791080 [ Upstream commit df8ed346 ] Currently also the pause flags are removed from phydev->supported because they're not included in PHY_DEFAULT_FEATURES. I don't think this is intended, especially when considering that this function can be called via phy_set_max_speed() anywhere in a driver. Change the masking to mask out only the values we're going to change. In addition remove the misleading comment, job of this small function is just to adjust the supported and advertised speeds. Fixes: f3a6bd39 ("phylib: Add phy_set_max_speed helper") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David Ahern authored
BugLink: https://bugs.launchpad.net/bugs/1791080 [ Upstream commit e7372197 ] Xin reported that icmp replies may not use the address on the device the echo request is received if the destination address is broadcast. Instead a route lookup is done without considering VRF context. Fix by setting oif in flow struct to the master device if it is enslaved. That directs the lookup to the VRF table. If the device is not enslaved, oif is still 0 so no affect. Fixes: cd2fbe1b ("net: Use VRF device index for lookups on RX") Reported-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Davidlohr Bueso authored
BugLink: https://bugs.launchpad.net/bugs/1791080 [ Upstream commit 107d01f5 ] rhashtable_init() currently does not take into account the user-passed min_size parameter unless param->nelem_hint is set as well. As such, the default size (number of buckets) will always be HASH_DEFAULT_SIZE even if the smallest allowed size is larger than that. Remediate this by unconditionally calling into rounded_hashtable_size() and handling things accordingly. Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1791080 [ Upstream commit 169dc027 ] The rol32 call is currently rotating hash but the rol'd value is being discarded. I believe the current code is incorrect and hash should be assigned the rotated value returned from rol32. Thanks to David Lebrun for spotting this. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Tyler Hicks authored
BugLink: https://bugs.launchpad.net/bugs/1791080 [ Upstream commit 70ba5b6d ] The low and high values of the net.ipv4.ping_group_range sysctl were being silently forced to the default disabled state when a write to the sysctl contained GIDs that didn't map to the associated user namespace. Confusingly, the sysctl's write operation would return success and then a subsequent read of the sysctl would indicate that the low and high values are the overflowgid. This patch changes the behavior by clearly returning an error when the sysctl write operation receives a GID range that doesn't map to the associated user namespace. In such a situation, the previous value of the sysctl is preserved and that range will be returned in a subsequent read of the sysctl. Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
Jing Xia authored
BugLink: https://bugs.launchpad.net/bugs/1791080 commit 9f15bde6 upstream. It was reported that a kernel crash happened in mem_cgroup_iter(), which can be triggered if the legacy cgroup-v1 non-hierarchical mode is used. Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b8f ...... Call trace: mem_cgroup_iter+0x2e0/0x6d4 shrink_zone+0x8c/0x324 balance_pgdat+0x450/0x640 kswapd+0x130/0x4b8 kthread+0xe8/0xfc ret_from_fork+0x10/0x20 mem_cgroup_iter(): ...... if (css_tryget(css)) <-- crash here break; ...... The crashing reason is that mem_cgroup_iter() uses the memcg object whose pointer is stored in iter->position, which has been freed before and filled with POISON_FREE(0x6b). And the root cause of the use-after-free issue is that invalidate_reclaim_iterators() fails to reset the value of iter->position to NULL when the css of the memcg is released in non- hierarchical mode. Link: http://lkml.kernel.org/r/1531994807-25639-1-git-send-email-jing.xia@unisoc.com Fixes: 6df38689 ("mm: memcontrol: fix possible memcg leak due to interrupted reclaim") Signed-off-by:
Jing Xia <jing.xia.mail@gmail.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: <chunyan.zhang@unisoc.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Vineet Gupta authored
BugLink: https://bugs.launchpad.net/bugs/1791080 commit 93312b6d upstream. mprotect(EXEC) was failing for stack mappings as default vm flags was missing MAYEXEC. This was triggered by glibc test suite nptl/tst-execstack testcase What is surprising is that despite running LTP for years on, we didn't catch this issue as it lacks a directed test case. gcc dejagnu tests with nested functions also requiring exec stack work fine though because they rely on the GNU_STACK segment spit out by compiler and handled in kernel elf loader. This glibc case is different as the stack is non exec to begin with and a dlopen of shared lib with GNU_STACK segment triggers the exec stack proceedings using a mprotect(PROT_EXEC) which was broken. CC: stable@vger.kernel.org Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Alexey Brodkin authored
BugLink: https://bugs.launchpad.net/bugs/1791080 commit 6e376114 upstream. swap was broken on ARC due to silly copy-paste issue. We encode offset from swapcache page in __swp_entry() as (off << 13) but were not decoding back in __swp_offset() as (off >> 13) - it was still (off << 13). This finally fixes swap usage on ARC. | # mkswap /dev/sda2 | | # swapon -a -e /dev/sda2 | Adding 500728k swap on /dev/sda2. Priority:-2 extents:1 across:500728k | | # free | total used free shared buffers cached | Mem: 765104 13456 751648 4736 8 4736 | -/+ buffers/cache: 8712 756392 | Swap: 500728 0 500728 Cc: stable@vger.kernel.org Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1791080 commit 39675f7a upstream. The SNDRV_RAWMIDI_IOCTL_PARAMS ioctl may resize the buffers and the current code is racy. For example, the sequencer client may write to buffer while it being resized. As a simple workaround, let's switch to the resized buffer inside the stream runtime lock. Reported-by: syzbot+52f83f0ea8df16932f7f@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
OGAWA Hirofumi authored
BugLink: https://bugs.launchpad.net/bugs/1791080 commit 35033ab9 upstream. In parse_options(), if match_strdup() failed, parse_options() leaves opts->iocharset in unexpected state (i.e. still pointing the freed string). And this can be the cause of double free. To fix, this initialize opts->iocharset always when freeing. Link: http://lkml.kernel.org/r/8736wp9dzc.fsf@mail.parknet.co.jpSigned-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reported-by: syzbot+90b8e10515ae88228a92@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Dewet Thibaut authored
BugLink: https://bugs.launchpad.net/bugs/1791080 commit fbdb328c upstream. commit b3b7c479 ("x86/MCE: Serialize sysfs changes") introduced a min interval limitation when setting the check interval for polled MCEs. However, the logic is that 0 disables polling for corrected MCEs, see Documentation/x86/x86_64/machinecheck. The limitation prevents disabling. Remove this limitation and allow the value 0 to disable polling again. Fixes: b3b7c479 ("x86/MCE: Serialize sysfs changes") Signed-off-by:
Dewet Thibaut <thibaut.dewet@nokia.com> Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> [ Massage commit message. ] Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Lan Tianyu authored
BugLink: https://bugs.launchpad.net/bugs/1791080 commit b5020a8e upstream. Syzbot reports crashes in kvm_irqfd_assign(), caused by use-after-free when kvm_irqfd_assign() and kvm_irqfd_deassign() run in parallel for one specific eventfd. When the assign path hasn't finished but irqfd has been added to kvm->irqfds.items list, another thead may deassign the eventfd and free struct kvm_kernel_irqfd(). The assign path then uses the struct kvm_kernel_irqfd that has been freed by deassign path. To avoid such issue, keep irqfd under kvm->irq_srcu protection after the irqfd has been added to kvm->irqfds.items list, and call synchronize_srcu() in irq_shutdown() to make sure that irqfd has been fully initialized in the assign path. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Tianyu Lan <tianyu.lan@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Martin Schwidefsky authored
CVE-2017-5715 (Spectre v2 s390x) git commit e1cf4bef "bpf, s390x: remove ld_abs/ld_ind" removed the code that generated the indirect branch "basr %b5,%w1" from the BPF JIT. Older versions of the BPF which still have support for LD_ABS/LD_IND need a patch to add the execute trampoline for this branch instruction. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com> Signed-off-by:
-
Martin Schwidefsky authored
CVE-2017-5715 (Spectre v2 s390x) The memove, memset, memcpy, __memset16, __memset32 and __memset64 function have an additional indirect return branch in form of a "bzr" instruction. These need to use expolines as well. Fixes: 97489e06 ("s390/lib: use expoline for indirect branches") Signed-off-by:
-
Martin Schwidefsky authored
CVE-2017-5715 (Spectre v2 s390x) Detect and report the etoken facility. With spectre_v2=auto or CONFIG_EXPOLINE_AUTO=y automatically disable expolines and use the full branch prediction mode for the kernel. Signed-off-by:
-
- 06 Sep, 2018 1 commit
-
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1790884Signed-off-by:
-
