- 02 Dec, 2022 2 commits
-
-
Fabien Parent authored
Add regulator driver for the MT6357 PMIC. Signed-off-by:
Fabien Parent <fparent@baylibre.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
Alexandre Mergnat <amergnat@baylibre.com> Link: https://lore.kernel.org/r/20221005-mt6357-support-v7-7-477e60126749@baylibre.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Fabien Parent authored
Add YAML schema for the MediaTek MT6357 regulators. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
- 01 Dec, 2022 2 commits
-
-
Yang Yingliang authored
If create_regulator() fails in set_supply(), the module refcount needs be put to keep refcount balanced. Fixes: e2c09ae7 ("regulator: core: Increase refcount for regulator supply's module") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221201122706.4055992-2-yangyingliang@huawei.comSigned-off-by:
-
Rui Zhang authored
I found a use_count leakage towards supply regulator of rdev with boot-on option. ┌───────────────────┐ ┌───────────────────┐ │ regulator_dev A │ │ regulator_dev B │ │ (boot-on) │ │ (boot-on) │ │ use_count=0 │
◀ ──supply──│ use_count=1 │ │ │ │ │ └───────────────────┘ └───────────────────┘ In case of rdev(A) configured with `regulator-boot-on', the use_count of supplying regulator(B) will increment inside regulator_enable(rdev->supply). Thus, B will acts like always-on, and further balanced regulator_enable/disable cannot actually disable it anymore. However, B was also configured with `regulator-boot-on', we wish it could be disabled afterwards. Signed-off-by:Rui Zhang <zr.zhang@vivo.com> Link: https://lore.kernel.org/r/20221201033806.2567812-1-zr.zhang@vivo.comSigned-off-by:
-
- 28 Nov, 2022 2 commits
-
-
Sebastian Reichel authored
Print error message for potential EPROBE_DEFER error using dev_err_probe, which captures the reason in /sys/kernel/debug/devices_deferred and otherwise silences the message. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20221020204251.108565-12-sebastian.reichel@collabora.comSigned-off-by:
-
Sebastian Reichel authored
Reduce usage of 'struct rk808' (driver data of the parent MFD), so that only the chip variant field is still being accessed directly. This allows restructuring the MFD driver to support SPI based PMICs. Acked-by:
-
- 25 Nov, 2022 1 commit
-
-
Mark Brown authored
Linux 6.1-rc4 which should get my CI working on RPi3s again.
-
- 24 Nov, 2022 7 commits
-
-
Jean Delvare authored
Since commit 0166dc11 ("of: make CONFIG_OF user selectable"), it is possible to test-build any driver which depends on OF on any architecture by explicitly selecting OF. Therefore depending on COMPILE_TEST as an alternative is no longer needed. It is actually better to always build such drivers with OF enabled, so that the test builds are closer to how each driver will actually be built on its intended target. Building them without OF may not test much as the compiler will optimize out potentially large parts of the code. In the worst case, this could even pop false positive warnings. Dropping COMPILE_TEST here improves the quality of our testing and avoids wasting time on non-existent issues. As a minor optimization, this also lets us drop several occurrences of of_match_ptr(), __maybe_unused and some ifdef guarding, as we now know what all of this will resolve to, we might as well save cpp some work. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Icenowy Zheng <icenowy@aosc.io> Link: https://lore.kernel.org/r/20221124144708.64371b98@endymion.delvareSigned-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-for-MFD-by:
Lee Jones <lee@kernel.org> Acked-for-Backlight-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Mark Brown authored
Merge series from Abel Vesa <abel.vesa@linaro.org>: This patchset adds regulator support for the new Qualcomm PM8550 PMIC.
-
- 23 Nov, 2022 15 commits
-
-
Mark Brown authored
Merge series from Matti Vaittinen <mazziesaccount@gmail.com>: Minor (printing) improvements for ROHM regulator drivers. This series: - Drops an unnecessary info print from bd718x7. (Added a fixes tag for this but not really sure if worth adding to stable) - Convert the ROHM BDxxxxx PMIC regulator drivers to use dev_err_probe(). - Change the probe logic for bd718x7 to favor the more usual devm-style where errors are returned immediately.
-
Abel Vesa authored
Add the rpmh regulators found in PM8550 PMIC and its variants, along with their compatibles and configuration data. They also contain some FT-SMPS 525, so add their configuration as well. Signed-off-by:
Abel Vesa <abel.vesa@linaro.org> Reviewed-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20221123153638.721254-3-abel.vesa@linaro.orgSigned-off-by:
-
Abel Vesa authored
Add compatible string for PM8550 used in SM8550 boards. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Acked-for-MFD-by:
-
Wang ShaoBo authored
Use kfree_const() to free supply_name conditionally in create_regulator() as supply_name may be allocated from kmalloc() or directly from .rodata section. Fixes: 87fe29b6 ("regulator: push allocations in create_regulator() outside of lock") Signed-off-by:
Wang ShaoBo <bobo.shaobowang@huawei.com> Link: https://lore.kernel.org/r/20221123034616.3609537-1-bobo.shaobowang@huawei.comSigned-off-by:
-
Matti Vaittinen authored
The dev_err_probe() has (at least) following benefits over dev_err() when printing an error print for a failed function call at a device driver probe: - Omit error level print if error is 'EPRBE_DEFER' - Standardized print format for returned error - return the error value allowing shortening calls like: if (ret) { dev_err(...); return ret; } to if (ret) return dev_err_probe(...); Convert the ROHM BD718x7 regulator driver to use the dev_err_probe() when returned error is not hard-coded constant. NOTE: This commit also changes the error handling path to return immediately from a spot where the error is spotted instead of using a single point of exit. Signed-off-by:Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/fee54c2d04bb41b51381e31523f9ed31575206d2.1669203610.git.mazziesaccount@gmail.comSigned-off-by:
-
Matti Vaittinen authored
The dev_err_probe() has (at least) following benefits over dev_err() when printing an error print for a failed function call at a device driver probe: - Omit error level print if error is 'EPRBE_DEFER' - Standardized print format for returned error - return the error value allowing shortening calls like: if (ret) { dev_err(...); return ret; } to if (ret) return dev_err_probe(...); Convert the ROHM BD71828, ROHM BD71815 and ROHM BD9576 regulator drivers to use the dev_err_probe() when returned error is not hard-coded constant. Signed-off-by: -
Matti Vaittinen authored
A device-tree node name was printed when bd718x7 driver's feedback-loop feature was developed. This print was accidentally left in driver. The info-level print just pollutes the log. Drop unnecessary pr_info() Fixes: d2ad9811 ("regulator: bd718x7: Support external connection to scale voltages") Signed-off-by:
-
Mark Brown authored
Merge branch 'i2c/client_device_id_helper-immutable' of https://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into regulator-6.2 so we can apply I2C API fixups.
-
- 22 Nov, 2022 11 commits
-
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Peng Wu authored
The regulator_get() function never returns NULL. It returns error pointers. Fixes: 27b9ecc7 ("regulator: Add of_regulator_bulk_get_all") Signed-off-by:
Peng Wu <wupeng58@huawei.com> Link: https://lore.kernel.org/r/20221122082242.82937-1-wupeng58@huawei.comSigned-off-by:
-
