Merge tag 'renesas-arm64-dt2-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64

Pull "Second Round of Renesas ARM64 Based SoC DT Updates for v4.10" from Simon Horman:

Enhancements:
* Add device nodes for PRR
* Add m3ulcb board
* Enable I2C on r8a7796/salvator-x board
* Enable SDHI0 on h3ulcb board

* tag 'renesas-arm64-dt2-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: r8a7796: Add device node for PRR
  arm64: dts: r8a7795: Add device node for PRR
  arm64: dts: h3ulcb: rename SDHI0 pins
  arm64: dts: h3ulcb: enable SDHI2
  arm64: dts: m3ulcb: enable SDHI2
  arm64: dts: m3ulcb: enable SDHI0
  arm64: dts: m3ulcb: enable WDT
  arm64: dts: m3ulcb: enable EXTALR clk
  arm64: dts: m3ulcb: enable GPIO keys
  arm64: dts: m3ulcb: enable GPIO leds
  arm64: dts: m3ulcb: enable SCIF clk and pins
  arm64: dts: m3ulcb: initial device tree
  arm64: dts: m3ulcb: add M3ULCB board DT bindings
  arm64: dts: h3ulcb: update header
  arm64: dts: h3ulcb: update documentation with official board name
  arm64: dts: r8a7796: salvator-x: enable I2C
  arm64: dts: r8a7796: Enable I2C DMA
  arm64: dts: r8a7796: add I2C support

Two branches were incorrectly sent without having the necessary
header file changes. Rather than back those out now, I'm replacing
the symbolic names for the clks and resets with the numeric
values to get 'make allmodconfig dtbs' back to work.

After the header file changes are merged, we can revert this
patch.

Fixes: 6bc37fac ("arm64: dts: add Allwinner A64 SoC .dtsi")
Fixes: 50784e61 ("dts: arm64: db820c: add pmic pins specific dts file")
Acked-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull "mvebu dt64 for 4.10 (part 2)" from Gregory CLEMENT:

Fix DTC warning on Armada 37xx and 7K/8K

* tag 'mvebu-dt64-4.10-2' of git://git.infradead.org/linux-mvebu:
  ARM64: dts: marvell: Fixup memory DT warning for Armada 37xx
  arm64: dts: marvell: Fixup config-space DT warning For Armada 7K/8K
  arm64: dts: marvell: Fixup internal-regs DT warning for Armada 37xx

Add PCIe support to the ARTPEC-6 SoC. This uses the existing
pcie-artpec6 driver.
So, all that is needed is device tree entries in the DTS.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Jesper Nilsson <jespern@axis.com>

Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This changes SDHI0 pin names for H3ULCB board
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This supports SDHI2 for H3ULCB onboard eMMC
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This supports SDHI2 for M3ULCB onboard eMMC
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This supports SDHI0 on M3ULCB board SD card slot
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This supports watchdog timer for M3ULCB board
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This enables EXTALR clock that can be used for the watchdog.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This supports GPIO keys on M3ULCB board
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This supports GPIO leds on M3ULCB board
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This enables the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add the initial device tree for the R8A7796 SoC based M3ULCB low cost
board (R-Car Starter Kit Pro)

This commit supports the following peripherals:
- SCIF (console)
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add M3ULCB Device tree bindings Documentation, listing it as a supported
board.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This updates H3ULCB device tree header with official board name
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This updates H3ULCB Device tree bindings Documentation with
official board name
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

memory has a reg property so the unit name should contain an address.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

config-space has a ranges property so the unit name should contain an
address.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

internal-regs has a ranges property so the unit name should contain an
address.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Merge tag 'samsung-dt64-gic-flags-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64

Topic branch with DT arm64 changes for v4.10.

Fix invalid GIC interrupt flags - type IRQ_TYPE_NONE is not allowed for GIC
interrupts.  Although this was working but with error messages like:
        genirq: Setting trigger mode 0 for irq 16 failed

Use level high interrupt instead of type none.  The choice of level high was
rather an arbitrary decision hoping it will work on each platform.  Tests shown
no issues so far.

* tag 'samsung-dt64-gic-flags-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: Use human-friendly symbols for interrupt properties in exynos7
  arm64: dts: exynos: Fix invalid GIC interrupt flags in exynos7
Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu dt64 for 4.10 (part 1)

Adding the new "community" board for Armada 3700

* tag 'mvebu-dt64-4.10-1' of git://git.infradead.org/linux-mvebu:
  arm64: dts: marvell: Add definition for the Globalscale Marvell ESPRESSOBin Board
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64

Amlogic DT changes for 64-bit platforms for v4.10

Support for new drivers:
- USB
- i2c
- SPI
- mailbox/MHU
- PWM
- ethernet MAC, PHY
- secure monitor
- IR
- watchdog

* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (27 commits)
  ARM64: dts: meson-gxbb-vega-s95: Add SD/SDIO/MMC and PWM nodes
  ARM64: dts: meson-gxl-s905x: Enable internal ethernet PHY
  ARM64: dts: meson-gxl-p23x: Enable ethernet
  ARM64: dts: meson-gxl: Add ethernet nodes with internal PHY
  ARM64: dts: amlogic: Reorder copyrights for meson-gx
  ARM64: dts: meson-gxl-p23x: Enable IR receiver
  ARM64: dts: meson-gxl-p23x: Add SD/SDIO/MMC and PWM nodes
  ARM64: dts: meson-gxl-p23x: Add uart pinctrl
  ARM64: dts: meson-gxl: Add MMC/SD/SDIO nodes
  ARM64: dts: meson-gxl: Add i2c nodes
  ARM64: dts: meson-gxl: Add clock nodes
  ARM64: dts: meson-gxl: Add pinctrl nodes
  ARM64: dts: meson-gxbb: Move common nodes to meson-gx
  ARM64: dts: meson-gxbb: Add SCPI with cpufreq & sensors Nodes
  ARM64: dts: meson-gxbb: Add SRAM node
  ARM64: dts: meson-gxbb: Add MMC nodes to Nexbox A95x
  ARM64: dts: meson-gxbb: Add P20x Wifi SDIO support
  ARM64: dts: meson-gxbb: Add Wifi 32K clock for p20x boards
  ARM64: dts: meson-gxbb: add MMC support
  ARM64: dts: meson-gxbb-odroidc2: Enable USB Nodes
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-dt64-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt64

Allwinner arm64 DT changes for 4.10

Support for the Allwinner A64, their first armv8 SoC.

* tag 'sunxi-dt64-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  arm64: dts: add Pine64 support
  Documentation: devicetree: add vendor prefix for Pine64
  arm64: dts: add Allwinner A64 SoC .dtsi
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM64: DT: Hisilicon SoC DT updates for 4.10

- Correct the hardware pin number of the usb node on the Hip06
- Add the Hisilicon Hip07 D05 board dts binding
- Add the initial dts for the Hip07 D05 board
- Fix the warning for the node without reg propery on the Hip06
- Fix the sas am max transmissions quirk property on the Hip06
- Disable the sas0 and sas2 on D03 board
- Add refclk node for SAS on the Hip06

* tag 'hisi-arm64-dt-4.10' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: hisi: add refclk node to hip06 dts files for SAS
  arm64: dts: hisi: disable sas0 and sas2 for d03
  arm64: dts: hisi: fix hip06 sas am-max-trans quirk
  arm64: dts: hip06: Fix no reg property warning
  arm64: dts: hisilicon: Add initial dts for Hip07 D05 board
  Documentation: arm64: Add Hisilicon Hip07 D05 dts binding
  arm64: dts: hip06: Correct hardware pin number of usb node
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-dt64-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64

Freescale arm64 device tree updates for 4.10:
 - Enable Thermal Monitoring Unit (TMU) for thermal management on
   LS1043A and LS2080A.
 - Add support for LS1046A SoC, which has similar peripherals as
   LS1043A but integrates 4 A72 cores.
 - Add two LS1046A based board support: LS1046A-QDS and LS1046A-RDB.

* tag 'imx-dt64-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: ls2080a: Add TMU device tree support for LS2080A
  arm64: dts: ls1043a: Add TMU device tree support for LS1043A
  arm64: dts: add LS1046A-QDS board support
  Documentation: DT: Add entry for QorIQ LS1046A-QDS board
  arm64: dts: add LS1046A-RDB board support
  Documentation: DT: Add entry for QorIQ LS1046A-RDB board
  arm64: dts: add QorIQ LS1046A SoC support
  dt-bindings: ahci-fsl-qoriq: updated for SoC ls1046a
  dt-bindings: qoriq-clock: add LS1043A/LS1046A/LS2080A compatible for clockgen
  dt-bindings: i2c: adds two more nxp devices
  dt-bindings: fsl: add LS1043A/LS1046A/LS2080A compatible for SCFG and DCFG
  dt-bindings: fsl: Add LS1043A/LS1046A/LS2080A SoC compatible strings
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-arm64-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt64

Qualcomm ARM64 Updates for v4.10

* Add Hexagon SMD/PIL nodes
* Add DB820c PMIC pins
* Fixup APQ8016 voltage ranges
* Add various MSM8996 nodes to support SMD/SMEM/SMP2P
* Add support for Huawei Nexus 6P (Angler)
* Add support for LG Nexus 5x (Bullhead)

* tag 'qcom-arm64-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  arm64: dts: msm8994 SoC and Huawei Angler (Nexus 6P) support
  dt-bindings: qcom: Add msm899(2/4) bindings
  arm64: dts: msm8992 SoC and LG Bullhead (Nexus 5X) support
  arm64: dts: msm8996: Add SMP2P and APCS nodes
  arm64: dts: msm8996: Add SMEM DT nodes
  arm64: dts: msm8996: Add reserve-memory nodes
  arm64: dts: msm8996: Add SMEM reserve-memory node
  arm64: dts: apq8016-sbc: add analog audio support with multicodec
  arm64: dts: qcom: Add missing interrupt entry for pm8994 gpios
  arm64: dts: apq8016-sbc: Set up LDO2, LDO6 and LDO17 regulator voltage ranges
  dts: arm64: db820c: add pmic pins specific dts file
  arm64: dts: qcom: msm8916: Add Hexagon PIL node
  arm64: dts: qcom: msm8916: Add Hexagon SMD edge
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge branch 'clk-qcom-8994' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux into next/dt64

* 'clk-qcom-8994' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: qcom: Add support for msm8994 global clock controller
  dt-bindings: qcom: clocks: Add msm8994 clock bindings

Merge tag 'v4.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64

64bit devicetree changes including the px5 evaluation board
a fix for wrong i2c registers on rk3368 a new nvmem cell and
power-domain on rk3399 as well as moving mmc frequency
properties to the more generic max-frequency one.

* tag 'v4.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: replace to "max-frequency" instead of "clock-freq-min-max"
  arm64: dts: rockchip: add cpu-id nvmem cell node for rk3399
  arm64: dts: rockchip: add sdmmc support for px5-evb
  arm64: dts: rockchip: Add more properties for emmc on px5-evb
  arm64: dts: rockchip: Add PX5 Evaluation board
  arm64: dts: rockchip: add powerdomain for typec on rk3399
  arm64: dts: rockchip: fix i2c resource error of rk3368
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-dt64-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64

Finally, I am really pleased to announce adding support for Exynos5433 ARMv8
SoC along with two boards.  A lot of Samsung people contributed into this
but the final work and commits were done by Chanwoo Choi.

This means that for v4.10 we got:
1. Exynos5433 DTSI.
2. Two boards: TM2 and TM2E.  These are (almost fully) working mobile phones.

* tag 'samsung-dt64-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: Add dts file for Exynos5433-based TM2E board
  arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board
  arm64: dts: exynos: Add dtsi files for Samsung Exynos5433 64bit SoC
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'uniphier-dt64-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt64

UniPhier ARM64 SoC DT updates for v4.10

- Switch CPU enable-method from spin-table to PSCI
- Add OPP tables to support generic cpufreq driver
- Misc fixes

* tag 'uniphier-dt64-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: make compatible of syscon nodes SoC-specific
  arm64: dts: uniphier: add CPU clocks and OPP tables for LD20 SoC
  arm64: dts: uniphier: add CPU clock and OPP table for LD11 SoC
  arm64: dts: uniphier: increase register region size of sysctrl node
  arm64: dts: uniphier: switch over to PSCI enable method
Signed-off-by: Olof Johansson <olof@lixom.net>

Linux 4.9-rc3

* tag 'v4.9-rc3': (292 commits)
  Linux 4.9-rc3
  x86/smpboot: Init apic mapping before usage
  ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region()
  ACPICA: Dispatcher: Fix an unbalanced lock exit path in acpi_ds_auto_serialize_method()
  ACPICA: Dispatcher: Fix order issue of method termination
  ARC: module: print pretty section names
  ARC: module: elide loop to save reference to .eh_frame
  ARC: mm: retire ARC_DBG_TLB_MISS_COUNT...
  ARC: build: retire old toggles
  ARC: boot log: refactor cpu name/release printing
  ARC: boot log: remove awkward space comma from MMU line
  ARC: boot log: don't assume SWAPE instruction support
  ARC: boot log: refactor printing abt features not captured in BCRs
  ARCv2: boot log: print IOC exists as well as enabled status
  ubifs: Fix regression in ubifs_readdir()
  ubi: fastmap: Fix add_vol() return value test in ubi_attach_fastmap()
  MAINTAINERS: Add entry for genwqe driver
  VMCI: Doorbell create and destroy fixes
  GenWQE: Fix bad page access during abort of resource allocation
  vme: vme_get_size potentially returning incorrect value on failure
  ...

Merge tag 'renesas-arm64-dt-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64

Renesas ARM64 Based SoC DT Updates for v4.10

Enablement:
* Enable On-board eMMC
* Enable SDHI 0 & 3 with UHS
* Add SYS-DMAC controller nodes to r8a7796 SoC
* Populate EXTALR on r8a7796/salvator-x board; used by watchdog
* Add DU LVDS output endpoint on r8a7795/salvator-x board
* Add bias setting for USB1 pins on r8a7795/salvator-x board

Clean-Up:
* Remove FCP SoC-specific compatible strings

* tag 'renesas-arm64-dt-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: renesas: r8a7796: add SYS-DMAC controller nodes
  arm64: dts: r8a7795: salvator-x: add bias setting for usb1_pins
  arm64: dts: r8a7796: salvator: enable on board eMMC
  arm64: dts: r8a7795: salvator: enable on-board eMMC
  arm64: dts: r8a7796: salvator-x: enable UHS for SDHI 0 & 3
  arm64: dts: r8a7796: salvator-x: enable SDHI0 & 3
  arm64: dts: r8a7796: add SDHI nodes
  arm64: dts: r8a7795: Remove FCP SoC-specific compatible strings
  dt-bindings: media: renesas-fcp: Remove SoC-specific compatible strings
  arm64: dts: r8a7795: salvator-x: Add DU LVDS output endpoint
  arm64: dts: r8a7796: salvator-x: Populate EXTALR
  arm64: dts: r8a7795: salvator-x: enable UHS for SDHI 0 & 3
Signed-off-by: Olof Johansson <olof@lixom.net>

All boards from the Tronsmart Vega S95 series are sharing similar MMC
based hardware.
sd_emmc_a is used to connect a Broadcom based SDIO wifi card (supported
by the brcmfmac driver). The 32.768KHz LPO clock for the wifi chip is
generated by PWM_E.
sd_emmc_b is routed to the SD-card. Unlike p20x there is no GPIO
regulator, meaning it only supports 3.3V (which seems to be hard-wired).
The eMMC chip is connected to sd_emmc_c and is implemented similar to
the meson-gxbb-p20x boards (meaning that hard-wired fixed regulators
are used).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>