Merge tag 'usb-serial-5.10-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for 5.10-rc3

Here's a fix for a long-standing issue with the cyberjack driver and
some new device ids.

All have been in linux-next with no reported issues.

* tag 'usb-serial-5.10-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: option: add Telit FN980 composition 0x1055
  USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231
  USB: serial: cyberjack: fix write-URB completion race
  USB: serial: option: add Quectel EC200T module support

pm_runtime_get_sync() will increment pm usage at first and it
will resume the device later. If runtime of the device has
error or device is in inaccessible state(or other error state),
resume operation will fail. If we do not call put operation to
decrease the reference, the result is that this device cannot
enter the idle state and always stay busy or other non-idle
state.

Fixes: 249fa821 ("USB: Add driver to control USB fast charge for iOS devices")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201102022650.67115-1-zhangqilong3@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes a possible issue when mtu3_gadget_stop()
already assigned NULL to mtu->gadget_driver during mtu_gadget_disconnect().

[<ffffff9008161974>] notifier_call_chain+0xa4/0x128
[<ffffff9008161fd4>] __atomic_notifier_call_chain+0x84/0x138
[<ffffff9008162ec0>] notify_die+0xb0/0x120
[<ffffff900809e340>] die+0x1f8/0x5d0
[<ffffff90080d03b4>] __do_kernel_fault+0x19c/0x280
[<ffffff90080d04dc>] do_bad_area+0x44/0x140
[<ffffff90080d0f9c>] do_translation_fault+0x4c/0x90
[<ffffff9008080a78>] do_mem_abort+0xb8/0x258
[<ffffff90080849d0>] el1_da+0x24/0x3c
[<ffffff9009bde01c>] mtu3_gadget_disconnect+0xac/0x128
[<ffffff9009bd576c>] mtu3_irq+0x34c/0xc18
[<ffffff90082ac03c>] __handle_irq_event_percpu+0x2ac/0xcd0
[<ffffff90082acae0>] handle_irq_event_percpu+0x80/0x138
[<ffffff90082acc44>] handle_irq_event+0xac/0x148
[<ffffff90082b71cc>] handle_fasteoi_irq+0x234/0x568
[<ffffff90082a8708>] generic_handle_irq+0x48/0x68
[<ffffff90082a96ac>] __handle_domain_irq+0x264/0x1740
[<ffffff90080819f4>] gic_handle_irq+0x14c/0x250
[<ffffff9008084cec>] el1_irq+0xec/0x194
[<ffffff90085b985c>] dma_pool_alloc+0x6e4/0xae0
[<ffffff9008d7f890>] cmdq_mbox_pool_alloc_impl+0xb0/0x238
[<ffffff9008d80904>] cmdq_pkt_alloc_buf+0x2dc/0x7c0
[<ffffff9008d80f60>] cmdq_pkt_add_cmd_buffer+0x178/0x270
[<ffffff9008d82320>] cmdq_pkt_perf_begin+0x108/0x148
[<ffffff9008d824d8>] cmdq_pkt_create+0x178/0x1f0
[<ffffff9008f96230>] mtk_crtc_config_default_path+0x328/0x7a0
[<ffffff90090246cc>] mtk_drm_idlemgr_kick+0xa6c/0x1460
[<ffffff9008f9bbb4>] mtk_drm_crtc_atomic_begin+0x1a4/0x1a68
[<ffffff9008e8df9c>] drm_atomic_helper_commit_planes+0x154/0x878
[<ffffff9008f2fb70>] mtk_atomic_complete.isra.16+0xe80/0x19c8
[<ffffff9008f30910>] mtk_atomic_commit+0x258/0x898
[<ffffff9008ef142c>] drm_atomic_commit+0xcc/0x108
[<ffffff9008ef7cf0>] drm_mode_atomic_ioctl+0x1c20/0x2580
[<ffffff9008ebc768>] drm_ioctl_kernel+0x118/0x1b0
[<ffffff9008ebcde8>] drm_ioctl+0x5c0/0x920
[<ffffff900863b030>] do_vfs_ioctl+0x188/0x1820
[<ffffff900863c754>] SyS_ioctl+0x8c/0xa0

Fixes: df2069ac ("usb: Add MediaTek USB3 DRD driver")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1604642069-20961-1-git-send-email-macpaul.lin@mediatek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add the following Telit FN980 composition:

0x1055: tty, adb, tty, tty, tty, tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20201103124425.12940-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>

Add following Telit LE910Cx compositions:

0x1203: rndis, tty, adb, tty, tty, tty, tty
0x1230: tty, adb, rmnet, audio, tty, tty, tty, tty
0x1231: rndis, tty, adb, audio, tty, tty, tty, tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20201031225458.10512-1-dnlplm@gmail.com
[ johan: add comments after entries ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>

The write-URB busy flag was being cleared before the completion handler
was done with the URB, something which could lead to corrupt transfers
due to a racing write request if the URB is resubmitted.

Fixes: 507ca9bc ("[PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.")
Cc: stable <stable@vger.kernel.org>     # 2.6.13
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

In Bugzilla #208257, Julien Humbert reports that a 32-GB Kingston
flash drive spontaneously disconnects and reconnects, over and over.
Testing revealed that disabling Link Power Management for the drive
fixed the problem.

This patch adds a quirk entry for that drive to turn off LPM permanently.

CC: Hans de Goede <jwrdegoede@fedoraproject.org>
CC: <stable@vger.kernel.org>
Reported-and-tested-by: Julien Humbert <julroy67@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20201102145821.GA1478741@rowland.harvard.eduSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'fixes-for-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

USB: fixes for v5.10-rc2

Nothing major as of yet, we're adding support for Intel Alder Lake-S
in dwc3, together with a few fixes that are quite important (memory
leak in raw-gadget, probe crashes in goku_udc, and so on).
Signed-off-by: Felipe Balbi <balbi@kernel.org>

* tag 'fixes-for-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
  usb: raw-gadget: fix memory leak in gadget_setup
  usb: dwc2: Avoid leaving the error_debugfs label unused
  usb: dwc3: ep0: Fix delay status handling
  usb: gadget: fsl: fix null pointer checking
  usb: gadget: goku_udc: fix potential crashes in probe
  usb: dwc3: pci: add support for the Intel Alder Lake-S

Pull x86 fixes from Thomas Gleixner:
 "Three fixes all related to #DB:

   - Handle the BTF bit correctly so it doesn't get lost due to a kernel
     #DB

   - Only clear and set the virtual DR6 value used by ptrace on user
     space triggered #DB. A kernel #DB must leave it alone to ensure
     data consistency for ptrace.

   - Make the bitmasking of the virtual DR6 storage correct so it does
     not lose DR_STEP"

* tag 'x86-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/debug: Fix DR_STEP vs ptrace_get_debugreg(6)
  x86/debug: Only clear/set ->virtual_dr6 for userspace #DB
  x86/debug: Fix BTF handling

Pull timer fixes from Thomas Gleixner:
 "A few fixes for timers/timekeeping:

   - Prevent undefined behaviour in the timespec64_to_ns() conversion
     which is used for converting user supplied time input to
     nanoseconds. It lacked overflow protection.

   - Mark sched_clock_read_begin/retry() to prevent recursion in the
     tracer

   - Remove unused debug functions in the hrtimer and timerlist code"

* tag 'timers-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Prevent undefined behaviour in timespec64_to_ns()
  timers: Remove unused inline funtion debug_timer_free()
  hrtimer: Remove unused inline function debug_hrtimer_free()
  time/sched_clock: Mark sched_clock_read_begin/retry() as notrace

Pull smp fix from Thomas Gleixner:
 "A single fix for stop machine.

  Mark functions no trace to prevent a crash caused by recursion when
  enabling or disabling a tracer on RISC-V (probably all architectures
  which patch through stop machine)"

* tag 'smp-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  stop_machine, rcu: Mark functions as notrace

Pull locking fixes from Thomas Gleixner:
 "A couple of locking fixes:

   - Fix incorrect failure injection handling in the fuxtex code

   - Prevent a preemption warning in lockdep when tracking
     local_irq_enable() and interrupts are already enabled

   - Remove more raw_cpu_read() usage from lockdep which causes state
     corruption on !X86 architectures.

   - Make the nr_unused_locks accounting in lockdep correct again"

* tag 'locking-urgent-2020-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep: Fix nr_unused_locks accounting
  locking/lockdep: Remove more raw_cpu_read() usage
  futex: Fix incorrect should_fail_futex() handling
  lockdep: Fix preemption WARN for spurious IRQ-enable

Pull char/misc fixes/removals from Greg KH:
 "Here's some small fixes for 5.10-rc2 and a big driver removal.

  The fixes are for some reported issues in the interconnect and
  coresight drivers, nothing major.

  The "big" driver removal is the MIC drivers have been asked to be
  removed as the hardware never shipped and Intel no longer wants to
  maintain something that no one can use. This is welcomed by many as
  the DMA usage of these drivers was "interesting" and the security
  people were starting to question some issues that were starting to be
  found in the codebase.

  Note, one of the subsystems for this driver, the "VOP" code, will
  probably come back in future kernel versions as it was looking to
  potentially solve some PCIe virtualization issues that a number of
  other vendors were wanting to solve. But as-is, this codebase didn't
  work for anyone else so no actual functionality is being removed.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  coresight: cti: Initialize dynamic sysfs attributes
  coresight: Fix uninitialised pointer bug in etm_setup_aux()
  coresight: add module license
  misc: mic: remove the MIC drivers
  interconnect: qcom: use icc_sync state for sm8[12]50
  interconnect: qcom: Ensure that the floor bandwidth value is enforced
  interconnect: qcom: sc7180: Init BCMs before creating the nodes
  interconnect: qcom: sdm845: Init BCMs before creating the nodes
  interconnect: Aggregate before setting initial bandwidth
  interconnect: qcom: sdm845: Enable keepalive for the MM1 BCM

Merge tag 'driver-core-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core and documentation fixes from Greg KH:
 "Here is one tiny debugfs change to fix up an API where the last user
  was successfully fixed up in 5.10-rc1 (so it couldn't be merged
  earlier), and a much larger Documentation/ABI/ update to the files so
  they can be automatically parsed by our tools.

  The Documentation/ABI/ updates are just formatting issues, small ones
  to bring the files into parsable format, and have been acked by
  numerous subsystem maintainers and the documentation maintainer. I
  figured it was good to get this into 5.10-rc2 to help wih the merge
  issues that would arise if these were to stick in linux-next until
  5.11-rc1.

  The debugfs change has been in linux-next for a long time, and the
  Documentation updates only for the last linux-next release"

* tag 'driver-core-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (40 commits)
  scripts: get_abi.pl: assume ReST format by default
  docs: ABI: sysfs-class-led-trigger-pattern: remove hw_pattern duplication
  docs: ABI: sysfs-class-backlight: unify ABI documentation
  docs: ABI: sysfs-c2port: remove a duplicated entry
  docs: ABI: sysfs-class-power: unify duplicated properties
  docs: ABI: unify /sys/class/leds/<led>/brightness documentation
  docs: ABI: stable: remove a duplicated documentation
  docs: ABI: change read/write attributes
  docs: ABI: cleanup several ABI documents
  docs: ABI: sysfs-bus-nvdimm: use the right format for ABI
  docs: ABI: vdso: use the right format for ABI
  docs: ABI: fix syntax to be parsed using ReST notation
  docs: ABI: convert testing/configfs-acpi to ReST
  docs: Kconfig/Makefile: add a check for broken ABI files
  docs: abi-testing.rst: enable --rst-sources when building docs
  docs: ABI: don't escape ReST-incompatible chars from obsolete and removed
  docs: ABI: create a 2-depth index for ABI
  docs: ABI: make it parse ABI/stable as ReST-compatible files
  docs: ABI: sysfs-uevent: make it compatible with ReST output
  docs: ABI: testing: make the files compatible with ReST output
  ...

Pull staging driver fixes from Greg KH:
 "Here are some small staging driver fixes for issues that have been
  reported in 5.10-rc1:

   - octeon driver fixes

   - wfx driver fixes

   - memory leak fix in vchiq driver

   - fieldbus driver bugfix

   - comedi driver bugfix

  All of these have been in linux-next with no reported issues"

* tag 'staging-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: fieldbus: anybuss: jump to correct label in an error path
  staging: wfx: fix test on return value of gpiod_get_value()
  staging: wfx: fix use of uninitialized pointer
  staging: mmal-vchiq: Fix memory leak for vchiq_instance
  staging: comedi: cb_pcidas: Allow 2-channel commands for AO subdevice
  staging: octeon: Drop on uncorrectable alignment or FCS error
  staging: octeon: repair "fixed-link" support

Pull tty/serial fixes from Greg KH:
 "Here are some small TTY and Serial driver fixes for reported issues
  for 5.10-rc2. They include:

   - vt ioctl bugfix for reported problems

   - fsl_lpuart serial driver fix

   - 21285 serial driver bugfix

  All have been in linux-next with no reported issues"

* tag 'tty-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt_ioctl: fix GIO_UNIMAP regression
  vt: keyboard, extend func_buf_lock to readers
  vt: keyboard, simplify vt_kdgkbsent
  tty: serial: fsl_lpuart: LS1021A has a FIFO size of 16 words, like LS1028A
  tty: serial: 21285: fix lockup on open

Pull USB driver fixes from Greg KH:
 "Here are a number of small bugfixes for reported issues in some USB
  drivers. They include:

   - typec bugfixes

   - xhci bugfixes and lockdep warning fixes

   - cdc-acm driver regression fix

   - kernel doc fixes

   - cdns3 driver bugfixes for a bunch of reported issues

   - other tiny USB driver fixes

  All have been in linux-next with no reported issues"

* tag 'usb-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: cdns3: gadget: own the lock wrongly at the suspend routine
  usb: cdns3: Fix on-chip memory overflow issue
  usb: cdns3: gadget: suspicious implicit sign extension
  xhci: Don't create stream debugfs files with spinlock held.
  usb: xhci: Workaround for S3 issue on AMD SNPS 3.0 xHC
  xhci: Fix sizeof() mismatch
  usb: typec: stusb160x: fix signedness comparison issue with enum variables
  usb: typec: add missing MODULE_DEVICE_TABLE() to stusb160x
  USB: apple-mfi-fastcharge: don't probe unhandled devices
  usbcore: Check both id_table and match() when both available
  usb: host: ehci-tegra: Fix error handling in tegra_ehci_probe()
  usb: typec: stusb160x: fix an IS_ERR() vs NULL check in probe
  usb: typec: tcpm: reset hard_reset_count for any disconnect
  usb: cdc-acm: fix cooldown mechanism
  usb: host: fsl-mph-dr-of: check return of dma_set_mask()
  usb: fix kernel-doc markups
  usb: typec: stusb160x: fix some signedness bugs
  usb: cdns3: Variable 'length' set but not used

Pull kvm fixes from Paolo Bonzini:
 "ARM:
   - selftest fix
   - force PTE mapping on device pages provided via VFIO
   - fix detection of cacheable mapping at S2
   - fallback to PMD/PTE mappings for composite huge pages
   - fix accounting of Stage-2 PGD allocation
   - fix AArch32 handling of some of the debug registers
   - simplify host HYP entry
   - fix stray pointer conversion on nVHE TLB invalidation
   - fix initialization of the nVHE code
   - simplify handling of capabilities exposed to HYP
   - nuke VCPUs caught using a forbidden AArch32 EL0

  x86:
   - new nested virtualization selftest
   - miscellaneous fixes
   - make W=1 fixes
   - reserve new CPUID bit in the KVM leaves"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: vmx: remove unused variable
  KVM: selftests: Don't require THP to run tests
  KVM: VMX: eVMCS: make evmcs_sanitize_exec_ctrls() work again
  KVM: selftests: test behavior of unmapped L2 APIC-access address
  KVM: x86: Fix NULL dereference at kvm_msr_ignored_check()
  KVM: x86: replace static const variables with macros
  KVM: arm64: Handle Asymmetric AArch32 systems
  arm64: cpufeature: upgrade hyp caps to final
  arm64: cpufeature: reorder cpus_have_{const, final}_cap()
  KVM: arm64: Factor out is_{vhe,nvhe}_hyp_code()
  KVM: arm64: Force PTE mapping on fault resulting in a device mapping
  KVM: arm64: Use fallback mapping sizes for contiguous huge page sizes
  KVM: arm64: Fix masks in stage2_pte_cacheable()
  KVM: arm64: Fix AArch32 handling of DBGD{CCINT,SCRext} and DBGVCR
  KVM: arm64: Allocate stage-2 pgd pages with GFP_KERNEL_ACCOUNT
  KVM: arm64: Drop useless PAN setting on host EL1 to EL2 transition
  KVM: arm64: Remove leftover kern_hyp_va() in nVHE TLB invalidation
  KVM: arm64: Don't corrupt tpidr_el2 on failed HVC call
  x86/kvm: Reserve KVM_FEATURE_MSI_EXT_DEST_ID

Pull vhost fixes from Michael Tsirkin:
 "Fixes all over the place.

  A new UAPI is borderline: can also be considered a new feature but
  also seems to be the only way we could come up with to fix addressing
  for userspace - and it seems important to switch to it now before
  userspace making assumptions about addressing ability of devices is
  set in stone"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vdpasim: allow to assign a MAC address
  vdpasim: fix MAC address configuration
  vdpa: handle irq bypass register failure case
  vdpa_sim: Fix DMA mask
  Revert "vhost-vdpa: fix page pinning leakage in error path"
  vdpa/mlx5: Fix error return in map_direct_mr()
  vhost_vdpa: Return -EFAULT if copy_from_user() fails
  vdpa_sim: implement get_iova_range()
  vhost: vdpa: report iova range
  vdpa: introduce config op to get valid iova range

Merge tag 'flexible-array-conversions-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull more flexible-array member conversions from Gustavo A. R. Silva:
 "Replace zero-length arrays with flexible-array members"

* tag 'flexible-array-conversions-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  printk: ringbuffer: Replace zero-length array with flexible-array member
  net/smc: Replace zero-length array with flexible-array member
  net/mlx5: Replace zero-length array with flexible-array member
  mei: hw: Replace zero-length array with flexible-array member
  gve: Replace zero-length array with flexible-array member
  Bluetooth: btintel: Replace zero-length array with flexible-array member
  scsi: target: tcmu: Replace zero-length array with flexible-array member
  ima: Replace zero-length array with flexible-array member
  enetc: Replace zero-length array with flexible-array member
  fs: Replace zero-length array with flexible-array member
  Bluetooth: Replace zero-length array with flexible-array member
  params: Replace zero-length array with flexible-array member
  tracepoint: Replace zero-length array with flexible-array member
  platform/chrome: cros_ec_proto: Replace zero-length array with flexible-array member
  platform/chrome: cros_ec_commands: Replace zero-length array with flexible-array member
  mailbox: zynqmp-ipi-message: Replace zero-length array with flexible-array member
  dmaengine: ti-cppi5: Replace zero-length array with flexible-array member

Pull dma-mapping fix from Christoph Hellwig:
 "Fix an integer overflow on 32-bit platforms in the new DMA range code
  (Geert Uytterhoeven)"

* tag 'dma-mapping-5.10-2' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: fix 32-bit overflow with CONFIG_ARM_LPAE=n

Pull SCSI fixes from James Bottomley:
 "Four driver fixes and one core fix.

  The core fix closes a race window where we could kick off a second
  asynchronous scan because the test and set of the variable preventing
  it isn't atomic"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: hisi_sas: Stop using queue #0 always for v2 hw
  scsi: ibmvscsi: Fix potential race after loss of transport
  scsi: mptfusion: Fix null pointer dereferences in mptscsih_remove()
  scsi: qla2xxx: Return EBUSY on fcport deletion
  scsi: core: Don't start concurrent async scan on same host

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Unless we want to test with THP, then we shouldn't require it to be
configured by the host kernel. Unfortunately, even advising with
MADV_NOHUGEPAGE does require it, so check for THP first in order
to avoid madvise failing with EINVAL.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20201029201703.102716-2-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

It was noticed that evmcs_sanitize_exec_ctrls() is not being executed
nowadays despite the code checking 'enable_evmcs' static key looking
correct. Turns out, static key magic doesn't work in '__init' section
(and it is unclear when things changed) but setup_vmcs_config() is called
only once per CPU so we don't really need it to. Switch to checking
'enlightened_vmcs' instead, it is supposed to be in sync with
'enable_evmcs'.

Opportunistically make evmcs_sanitize_exec_ctrls '__init' and drop unneeded
extra newline from it.
Reported-by: Yang Weijiang <weijiang.yang@intel.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20201014143346.2430936-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add a regression test for commit 671ddc70 ("KVM: nVMX: Don't leak
L1 MMIO regions to L2").

First, check to see that an L2 guest can be launched with a valid
APIC-access address that is backed by a page of L1 physical memory.

Next, set the APIC-access address to a (valid) L1 physical address
that is not backed by memory. KVM can't handle this situation, so
resuming L2 should result in a KVM exit for internal error
(emulation).
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20201026180922.3120555-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull block fixes from Jens Axboe:

 - null_blk zone fixes (Damien, Kanchan)

 - NVMe pull request from Christoph:
       - improve zone revalidation (Keith Busch)
       - gracefully handle zero length messages in nvme-rdma (zhenwei pi)
       - nvme-fc error handling fixes (James Smart)
       - nvmet tracing NULL pointer dereference fix (Chaitanya Kulkarni)"

 - xsysace platform fixes (Andy)

 - scatterlist type cleanup (David)

 - blk-cgroup memory fixes (Gabriel)

 - nbd block size update fix (Ming)

 - Flush completion state fix (Ming)

 - bio_add_hw_page() iteration fix (Naohiro)

* tag 'block-5.10-2020-10-30' of git://git.kernel.dk/linux-block:
  blk-mq: mark flush request as IDLE in flush_end_io()
  lib/scatterlist: use consistent sg_copy_buffer() return type
  xsysace: use platform_get_resource() and platform_get_irq_optional()
  null_blk: Fix locking in zoned mode
  null_blk: Fix zone reset all tracing
  nbd: don't update block size after device is started
  block: advance iov_iter on bio_add_hw_page failure
  null_blk: synchronization fix for zoned device
  nvmet: fix a NULL pointer dereference when tracing the flush command
  nvme-fc: remove nvme_fc_terminate_io()
  nvme-fc: eliminate terminate_io use by nvme_fc_error_recovery
  nvme-fc: remove err_work work item
  nvme-fc: track error_recovery while connecting
  nvme-rdma: handle unexpected nvme completion data length
  nvme: ignore zone validate errors on subsequent scans
  blk-cgroup: Pre-allocate tree node on blkg_conf_prep
  blk-cgroup: Fix memleak on error path

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arraysSigned-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arraysSigned-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arraysSigned-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arraysSigned-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure.  Kernel code
should always use “flexible array members”[1] for these cases.  The
older style of one-element or zero-length arrays should no longer be
used[2].

Refactor the code according to the use of a flexible-array member in
struct gve_stats_report, instead of a zero-length array, and use the
struct_size() helper to calculate the size for the resource allocation.

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arraysSigned-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arraysSigned-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

Pull io_uring fixes from Jens Axboe:

 - Fixes for linked timeouts (Pavel)

 - Set IO_WQ_WORK_CONCURRENT early for async offload (Pavel)

 - Two minor simplifications that make the code easier to read and
   follow (Pavel)

* tag 'io_uring-5.10-2020-10-30' of git://git.kernel.dk/linux-block:
  io_uring: use type appropriate io_kiocb handler for double poll
  io_uring: simplify __io_queue_sqe()
  io_uring: simplify nxt propagation in io_queue_sqe
  io_uring: don't miss setting IO_WQ_WORK_CONCURRENT
  io_uring: don't defer put of cancelled ltimeout
  io_uring: always clear LINK_TIMEOUT after cancel
  io_uring: don't adjust LINK_HEAD in cancel ltimeout
  io_uring: remove opcode check on ltimeout kill

Pull libata fix from Jens Axboe:
 "Single fix for an old regression with sata_nv"

* tag 'libata-5.10-2020-10-30' of git://git.kernel.dk/linux-block:
  ata: sata_nv: Fix retrieving of active qcs

Pull btrfs fixes from David Sterba:

 - lockdep fixes:
     - drop path locks before manipulating sysfs objects or qgroups
     - preliminary fixes before tree locks get switched to rwsem
     - use annotated seqlock

 - build warning fixes (printk format)

 - fix relocation vs fallocate race

 - tree checker properly validates number of stripes and parity

 - readahead vs device replace fixes

 - iomap dio fix for unnecessary buffered io fallback

* tag 'for-5.10-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: convert data_seqcount to seqcount_mutex_t
  btrfs: don't fallback to buffered read if we don't need to
  btrfs: add a helper to read the tree_root commit root for backref lookup
  btrfs: drop the path before adding qgroup items when enabling qgroups
  btrfs: fix readahead hang and use-after-free after removing a device
  btrfs: fix use-after-free on readahead extent after failure to create it
  btrfs: tree-checker: validate number of chunk stripes and parity
  btrfs: tree-checker: fix incorrect printk format
  btrfs: drop the path before adding block group sysfs files
  btrfs: fix relocation failure due to race with fallocate

Pull arm64 fixes from Will Deacon:
 "The diffstat is a bit spread out thanks to an invasive CPU erratum
  workaround which missed the merge window and also a bunch of fixes to
  the recently added MTE selftests.

   - Fixes to MTE kselftests

   - Fix return code from KVM Spectre-v2 hypercall

   - Build fixes for ld.lld and Clang's infamous integrated assembler

   - Ensure RCU is up and running before we use printk()

   - Workaround for Cortex-A77 erratum 1508412

   - Fix linker warnings from unexpected ELF sections

   - Ensure PE/COFF sections are 64k aligned"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Change .weak to SYM_FUNC_START_WEAK_PI for arch/arm64/lib/mem*.S
  arm64/smp: Move rcu_cpu_starting() earlier
  arm64: Add workaround for Arm Cortex-A77 erratum 1508412
  arm64: Add part number for Arm Cortex-A77
  arm64: mte: Document that user PSTATE.TCO is ignored by kernel uaccess
  module: use hidden visibility for weak symbol references
  arm64: efi: increase EFI PE/COFF header padding to 64 KB
  arm64: vmlinux.lds: account for spurious empty .igot.plt sections
  kselftest/arm64: Fix check_user_mem test
  kselftest/arm64: Fix check_ksm_options test
  kselftest/arm64: Fix check_mmap_options test
  kselftest/arm64: Fix check_child_memory test
  kselftest/arm64: Fix check_tags_inclusion test
  kselftest/arm64: Fix check_buffer_fill test
  arm64: avoid -Woverride-init warning
  KVM: arm64: ARM_SMCCC_ARCH_WORKAROUND_1 doesn't return SMCCC_RET_NOT_REQUIRED
  arm64: vdso32: Allow ld.lld to properly link the VDSO

Merge tag 'asm-generic-fixes-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic fix from Arnd Bergmann:
 "One small bugfix, fixing a build regression for RISC-V"

* tag 'asm-generic-fixes-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: mark __{get,put}_user_fn as __always_inline

Pull ARM SoC fixes from Arnd Bergmann:
 "This is a fairly large set of bug fixes on top of -rc1, as most of
  them were ready but didn't quite make it into the last-minute pull
  requests for the merge window.

  Allwinner:
   - fix for incorrect CPU overtemperature limit

  Amlogic:
   - multiple smaller DT bugfixes, and missing device nodes

  Marvell EBU:
   - add missing aliases for ethernet switch ports on espressobin board

  Marvell MMP:
   - DTC warning fix
   - bugfix for camera interface power-down

  NXP i.MX:
   - re-enable the GPIO driver on all defconfigs

  ST STM32MP1:
   - fix random crashes from incorrect voltage settings

  Synaptics Berlin:
   - enable the correct hardware timer driver

  Texas Instruments K2G:
   - fix a boot regression in the power domain code

  TEE drivers:
   - fix regression in TEE "login" method

  SCMI drivers:
   - multiple code fixes for corner cases in newly added code

  MAINTAINERS file:
   - move Kukjin Kim and Sangbeom Kim to credits (used to work on
     Samsung Exynos)
   - Masahiro Yamada is stepping down as Uniphier maintainer

  I did not include a series of patches that work around a regression
  caused by a bugfix in an ethernet phy driver that resulted in an
  inadvertent DT binding change. This is still under discussion"

* tag 'arm-soc-fixes-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
  soc: ti: ti_sci_pm_domains: check for proper args count in xlate
  ARM: dts: stm32: Describe Vin power supply on stm32mp157c-edx board
  ARM: dts: stm32: Describe Vin power supply on stm32mp15xx-dkx board
  ARM: multi_v5_defconfig: Select CONFIG_GPIO_MXC
  ARM: imx_v4_v5_defconfig: Select CONFIG_GPIO_MXC
  ARM: dts: mmp2-olpc-xo-1-75: Use plural form of "-gpios"
  ARM: dts: mmp3: Add power domain for the camera
  arm64: berlin: Select DW_APB_TIMER_OF
  dt-bindings: sram: sunxi-sram: add V3s compatible string
  MAINTAINERS: Move Sangbeom Kim to credits
  MAINTAINERS: Move Kukjin Kim to credits
  MAINTAINERS: step down as maintainer of UniPhier SoCs and Denali driver
  ARM: multi_v7_defconfig: Build in CONFIG_GPIO_MXC by default
  ARM: imx_v6_v7_defconfig: Build in CONFIG_GPIO_MXC by default
  arm64: defconfig: Build in CONFIG_GPIO_MXC by default
  arm64: dts: meson: odroid-n2 plus: fix vddcpu_a pwm
  ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
  arm64: dts: amlogic: add missing ethernet reset ID
  firmware: arm_scmi: Fix duplicate workqueue name
  firmware: arm_scmi: Fix locking in notifications
  ...