- 16 Feb, 2024 29 commits
-
-
Ard Biesheuvel authored
When LPA2 is enabled, bits 8 and 9 of page and block descriptors become part of the output address instead of carrying shareability attributes for the region in question. So avoid setting these bits if TCR.DS == 1, which means LPA2 is enabled. Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20240214122845.2033971-74-ardb+git@google.comSigned-off-by:
Catalin Marinas <catalin.marinas@arm.com>
-
Ard Biesheuvel authored
The LPA2 feature introduces new FSC values to report abort exceptions related to translation level -1. Define these and wire them up. Reuse the new ESR FSC classification helpers that arrived via the KVM arm64 tree, and update the one for translation faults to check specifically for a translation fault at level -1. (Access flag or permission faults cannot occur at level -1 because they alway involve a descriptor at the superior level so changing those helpers is not needed). Signed-off-by:
-
Ard Biesheuvel authored
The PROT_* macros resolve to expressions that are only valid in C and not in assembler, and so they are only usable from C code. Currently, we make an exception for the permission indirection init code in proc.S, which doesn't care about the bits that are conditionally set, and so we just #define PTE_MAYBE_NG to 0x0 for any assembler file that includes these definitions. This is dodgy because this means that PROT_NORMAL and friends is generally available in asm code, but defined in a way that deviates from the definition that C code will observe, which might lead to hard to diagnose issues down the road. So instead, #define PTE_MAYBE_NG only in the place where the PIE constants are evaluated, and #undef it again right after. This allows us to drop the #define from pgtable-prot.h, and avoid the risk of deviating definitions between asm and C. Signed-off-by:
-
Ard Biesheuvel authored
Add support for overriding the VARange field of the MMFR2 CPU ID register. This permits the associated LVA feature to be overridden early enough for the boot code that creates the kernel mapping to take it into account. Given that LPA2 implies LVA, disabling the latter should disable the former as well. So override the ID_AA64MMFR0.TGran field of the current page size as well if it advertises support for 52-bit addressing. Signed-off-by:
-
Ard Biesheuvel authored
Currently, we detect CPU support for 52-bit virtual addressing (LVA) extremely early, before creating the kernel page tables or enabling the MMU. We cannot override the feature this early, and so large virtual addressing is always enabled on CPUs that implement support for it if the software support for it was enabled at build time. It also means we rely on non-trivial code in asm to deal with this feature. Given that both the ID map and the TTBR1 mapping of the kernel image are guaranteed to be 48-bit addressable, it is not actually necessary to enable support this early, and instead, we can model it as a CPU feature. That way, we can rely on code patching to get the correct TCR.T1SZ values programmed on secondary boot and resume from suspend. On the primary boot path, we simply enable the MMU with 48-bit virtual addressing initially, and update TCR.T1SZ if LVA is supported from C code, right before creating the kernel mapping. Given that TTBR1 still points to reserved_pg_dir at this point, updating TCR.T1SZ should be safe without the need for explicit TLB maintenance. Since this gets rid of all accesses to the vabits_actual variable from asm code that occurred before TCR.T1SZ had been programmed, we no longer have a need for this variable, and we can replace it with a C expression that produces the correct value directly, based on the value of TCR.T1SZ. Signed-off-by:
-
Ard Biesheuvel authored
This reverts commit 1682c45b, which is no longer needed now that we create the permanent kernel mapping directly during early boot. This is a RINO (revert in name only) given that some of the code has moved around, but the changes are straight-forward. Signed-off-by:
-
Ard Biesheuvel authored
Now that the early kernel mapping is created with all the right attributes and segment boundaries, there is no longer a need to recreate it and switch to it. This also means we no longer have to copy the kasan shadow or some parts of the fixmap from one set of page tables to the other. Signed-off-by:
-
Ard Biesheuvel authored
Early in the boot, when .rodata is still writable, we can poke swapper_pg_dir entries directly, and there is no need to go through the fixmap. After a future patch, we will enter the kernel with swapper_pg_dir already active, and early swapper_pg_dir updates for creating the fixmap page table hierarchy itself cannot go through the fixmap for obvious reaons. So let's keep track of whether rodata is writable, and update the descriptor directly in that case. As the same reasoning applies to early KASAN init, make the function noinstr as well. Signed-off-by:
-
Ard Biesheuvel authored
The asm code that creates the initial ID map is rather intricate and hard to follow. This is problematic because it makes adding support for things like LPA2 or WXN more difficult than necessary. Also, it is parameterized like the rest of the MM code to run with a configurable number of levels, which is rather pointless, given that all AArch64 CPUs implement support for 48-bit virtual addressing, and that many systems exist with DRAM located outside of the 39-bit addressable range, which is the only smaller VA size that is widely used, and we need additional tricks to make things work in that combination. So let's bite the bullet, and rip out all the asm macros, and fiddly code, and replace it with a C implementation based on the newly added routines for creating the early kernel VA mappings. And while at it, create the initial ID map based on 48-bit virtual addressing as well, regardless of the number of configured levels for the kernel proper. Note that this code may execute with the MMU and caches disabled, and is therefore not permitted to make unaligned accesses. This shouldn't generally happen in any case for the algorithm as implemented, but to be sure, let's pass -mstrict-align to the compiler just in case. Signed-off-by:
-
Ard Biesheuvel authored
The mapping from PGD/PUD/PMD to levels and shifts is very confusing, given that, due to folding, the shifts may be equal for different levels, if the macros are even #define'd to begin with. In a subsequent patch, we will modify the ID mapping code to decouple the number of levels from the kernel's view of how these types are folded, so prepare for this by reformulating the macros without the use of these types. Instead, use SWAPPER_BLOCK_SHIFT as the base quantity, and derive it from either PAGE_SHIFT or PMD_SHIFT, which -if defined at all- are defined unambiguously for a given page size, regardless of the number of configured levels. Signed-off-by:
-
Ard Biesheuvel authored
Even though we support loading kernels anywhere in 48-bit addressable physical memory, we create the ID maps based on the number of levels that we happened to configure for the kernel VA and user VA spaces. The reason for this is that the PGD/PUD/PMD based classification of translation levels, along with the associated folding when the number of levels is less than 5, does not permit creating a page table hierarchy of a set number of levels. This means that, for instance, on 39-bit VA kernels we need to configure an additional level above PGD level on the fly, and 36-bit VA kernels still only support 47-bit virtual addressing with this trick applied. Now that we have a separate helper to populate page table hierarchies that does not define the levels in terms of PUDS/PMDS/etc at all, let's reuse it to create the permanent ID map with a fixed VA size of 48 bits. Signed-off-by:
-
Ard Biesheuvel authored
The asm version of the kernel mapping code works fine for creating a coarse grained identity map, but for mapping the kernel down to its exact boundaries with the right attributes, it is not suitable. This is why we create a preliminary RWX kernel mapping first, and then rebuild it from scratch later on. So let's reimplement this in C, in a way that will make it unnecessary to create the kernel page tables yet another time in paging_init(). Signed-off-by:
-
Ard Biesheuvel authored
__cpu_replace_ttbr1() is a static inline, and so it gets instantiated wherever it is used. This is not really necessary, as it is never called on a hot path. It also has the unfortunate side effect that the symbol idmap_cpu_replace_ttbr1 may never be referenced from kCFI enabled C code, and this means the type id symbol may not exist either. This will result in a build error once we start referring to this symbol from asm code as well. (Note that this problem only occurs when CnP, KAsan and suspend/resume are all disabled in the Kconfig but that is a valid config, if unusual). So let's just move it out of line so all callers will share the same implementation, which will reference idmap_cpu_replace_ttbr1 unconditionally. Signed-off-by:
-
Ard Biesheuvel authored
In preparation for moving the first assignment of arm64_use_ng_mappings to an earlier stage in the boot, ensure that kaslr_requires_kpti() is accessible without relying on the core kernel's view on whether or not KASLR is enabled. So make it a static inline, and move the kaslr_enabled() check out of it and into the callers, one of which will disappear in a subsequent patch. Once/when support for the obsolete ThunderX 1 platform is dropped, this check reduces to a E0PD feature check on the local CPU. Signed-off-by:
-
Ard Biesheuvel authored
Now that we can set BSS variables from the early code running from the ID map, we can set memstart_offset_seed directly from the C code that derives the value instead of passing it back and forth between C and asm code. Signed-off-by:
-
Ard Biesheuvel authored
In preparation for switching to an early kernel mapping routine that maps each segment according to its precise boundaries, and with the correct attributes, let's allocate some extra pages for page tables for the 4k page size configuration. This is necessary because the start and end of each segment may not be aligned to the block size, and so we'll need an extra page table at each segment boundary. Signed-off-by:
-
Ard Biesheuvel authored
Add some helpers that will be used by the early kernel mapping code to check feature support on the local CPU. This permits the early kernel mapping to be created with the right attributes, removing the need for tearing it down and recreating it. Signed-off-by:
-
Ard Biesheuvel authored
Add rodata=off to the set of kernel command line options that is parsed early using the CPU feature override detection code, so we can easily refer to it when creating the kernel mapping. Signed-off-by:
-
Ard Biesheuvel authored
The early kaslr code open codes the detection of 'nokaslr' on the kernel command line, and this is no longer necessary now that the feature detection code, which also looks for the same string, executes before this code. Signed-off-by:
-
Ard Biesheuvel authored
Add some helpers to extract and apply feature overrides to the bare idreg values. This involves inspecting the value and mask of the specific field that we are interested in, given that an override value/mask pair might be invalid for one field but valid for another. Then, wire up the new helper for the hVHE test - note that we can drop the sysreg test here, as the override will be invalid when trying to enable hVHE on non-VHE capable hardware. Signed-off-by:
-
Ard Biesheuvel authored
Once we update the early kernel mapping code to only map the kernel once with the right permissions, we can no longer perform code patching via this mapping. So move this code to an earlier stage of the boot, right after applying the relocations. Signed-off-by:
-
Ard Biesheuvel authored
To permit the feature overrides to be taken into account before the KASLR init code runs and the kernel mapping is created, move the detection code to an earlier stage in the boot. In a subsequent patch, this will be taken advantage of by merging the preliminary and permanent mappings of the kernel text and data into a single one that gets created and relocated before start_kernel() is called. Signed-off-by:
-
Ard Biesheuvel authored
In order to allow the CPU feature override detection code to run even earlier, move the feature override global variables into BSS, which is the only part of the static kernel image that is mapped read-write in the initial ID map. Signed-off-by:
-
Ard Biesheuvel authored
We will move the CPU feature overrides into BSS in a subsequent patch, and this requires that BSS is zeroed before the feature override detection code runs. So let's map BSS read-write in the ID map, and zero it via this mapping. Since the kernel page tables are right next to it, and also zeroed via the ID map, let's drop the separate clear_page_tables() function, and just zero everything in one go. Signed-off-by:
-
Ard Biesheuvel authored
The early FDT remap code is no longer used so let's drop it. Signed-off-by:
-
Ard Biesheuvel authored
We will want to parse the ID register overrides even earlier, so that we can take them into account before creating the kernel mapping. So migrate the code and make it work in the context of the early C runtime. We will move the invocation to an earlier stage in a subsequent patch. Signed-off-by:
-
Ard Biesheuvel authored
Now that we have a mini C runtime before the kernel mapping is up, we can move the non-trivial relocation processing code out of head.S and reimplement it in C. Signed-off-by:
-
Ard Biesheuvel authored
We will add some code under pi/ that contains global variables that should not end up in __initdata, as they will not be writable via the initial ID map. So only rely on objcopy for making the libfdt code __init, and use explicit annotations for the rest. Signed-off-by:
-
Ard Biesheuvel authored
The mini C runtime runs before relocations are processed, and so it cannot rely on statically initialized pointer variables. Add a check to ensure that such code does not get introduced by accident, by going over the relocations in each object, identifying the ones that operate on data sections that are part of the executable image, and raising an error if any relocations of type R_AARCH64_ABS64 exist. Note that such relocations are permitted in other places (e.g., debug sections) and will never occur in compiler generated code sections when using the small code model, so only check sections that have SHF_ALLOC set and SHF_EXECINSTR cleared. To accommodate cases where statically initialized symbol references are unavoidable, introduce a special case for ELF input data sections that have ".rodata.prel64" in their names, and in these cases, instead of rejecting any encountered ABS64 relocations, convert them into PREL64 relocations, which don't require any runtime fixups. Note that the code in question must still be modified to deal with this, as it needs to convert the 64-bit signed offsets into absolute addresses before use. Signed-off-by:
-
- 09 Feb, 2024 7 commits
-
-
Ard Biesheuvel authored
Currently, we base the KASLR randomization range on a rough estimate of the available space in the upper VA region: the lower 1/4th has the module region and the upper 1/4th has the fixmap, vmemmap and PCI I/O ranges, and so we pick a random location in the remaining space in the middle. Once we enable support for 5-level paging with 4k pages, this no longer works: the vmemmap region, being dimensioned to cover a 52-bit linear region, takes up so much space in the upper VA region (the size of which is based on a 48-bit VA space for compatibility with non-LVA hardware) that the region above the vmalloc region takes up more than a quarter of the available space. So instead of a heuristic, let's derive the randomization range from the actual boundaries of the vmalloc region. Signed-off-by:
Mark Rutland <mark.rutland@arm.com>
-
Ard Biesheuvel authored
The vmemmap array is statically sized based on the maximum supported size of the virtual address space, but it is located inside the upper VA region, which is statically sized based on the *minimum* supported size of the VA space. This doesn't matter much when using 64k pages, which is the only configuration that currently supports 52-bit virtual addressing. However, upcoming LPA2 support will change this picture somewhat, as in that case, the vmemmap array will take up more than 25% of the upper VA region when using 4k pages. Given that most of this space is never used when running on a system that does not support 52-bit virtual addressing, let's reclaim the unused vmemmap area in that case. Signed-off-by:
-
Ard Biesheuvel authored
The placement and size of the vmemmap region in the kernel virtual address space is currently derived from the base2 order of the size of a struct page. This makes for nicely aligned constants with lots of leading 0xf and trailing 0x0 digits, but given that the actual struct pages are indexed as an ordinary array, this resulting region is severely overdimensioned when the size of a struct page is just over a power of 2. This doesn't matter today, but once we enable 52-bit virtual addressing for 4k pages configurations, the vmemmap region may take up almost half of the upper VA region with the current struct page upper bound at 64 bytes. And once we enable KMSAN or other features that push the size of a struct page over 64 bytes, we will run out of VMALLOC space entirely. So instead, let's derive the region size from the actual size of a struct page, and place the entire region 1 GB from the top of the VA space, where it still doesn't share any lower level translation table entries with the fixmap. Acked-by:
-
Ard Biesheuvel authored
We will soon reclaim the part of the vmemmap region that covers VA space that is not addressable by the hardware. To avoid confusion, ensure that the 'vmemmap start' marker points at the start of the region that is actually being used for the struct page array, rather than the start of the region we set aside for it at build time. Signed-off-by:
-
Ard Biesheuvel authored
Rework the way the address_markers array is populated so that we can tolerate values that are not compile time constants generally, rather than keeping track manually of the array indexes in question, and poking new values into them manually. This will be needed for VMALLOC_END, which will cease to be a compile time constant after a subsequent patch. Acked-by:
-
Ard Biesheuvel authored
Move the fixmap region above the vmemmap region, so that the start of the vmemmap delineates the end of the region available for vmalloc and vmap allocations and the randomized placement of the kernel and modules. In a subsequent patch, we will take advantage of this to reclaim most of the vmemmap area when running a 52-bit VA capable build with 52-bit virtual addressing disabled at runtime. Note that the existing guard region of 256 MiB covers the fixmap and PCI I/O regions as well, so we can reduce it 8 MiB, which is what we use in other places too. Signed-off-by:
-
Ard Biesheuvel authored
Move the PCI I/O region above the vmemmap region in the kernel's VA space. This will permit us to reclaim the lower part of the vmemmap region for vmalloc/vmap allocations when running a 52-bit VA capable build on a 48-bit VA capable system. Also, given that PCI_IO_START is derived from VMEMMAP_END, use that symbolic constant directly in ptdump rather than deriving it from VMEMMAP_START and VMEMMAP_SIZE, as those definitions will change in subsequent patches. Signed-off-by:
-
- 04 Feb, 2024 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Miscellaneous bug fixes and cleanups in ext4's multi-block allocator and extent handling code" * tag 'for-linus-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits) ext4: make ext4_set_iomap() recognize IOMAP_DELALLOC map type ext4: make ext4_map_blocks() distinguish delalloc only extent ext4: add a hole extent entry in cache after punch ext4: correct the hole length returned by ext4_map_blocks() ext4: convert to exclusive lock while inserting delalloc extents ext4: refactor ext4_da_map_blocks() ext4: remove 'needed' in trace_ext4_discard_preallocations ext4: remove unnecessary parameter "needed" in ext4_discard_preallocations ext4: remove unused return value of ext4_mb_release_group_pa ext4: remove unused return value of ext4_mb_release_inode_pa ext4: remove unused return value of ext4_mb_release ext4: remove unused ext4_allocation_context::ac_groups_considered ext4: remove unneeded return value of ext4_mb_release_context ext4: remove unused parameter ngroup in ext4_mb_choose_next_group_*() ext4: remove unused return value of __mb_check_buddy ext4: mark the group block bitmap as corrupted before reporting an error ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal() ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found() ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt ext4: avoid bb_free and bb_fragments inconsistency in mb_free_blocks() ...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: "Five smb3 client fixes, mostly multichannel related: - four multichannel fixes including fix for channel allocation when multiple inactive channels, fix for unneeded race in channel deallocation, correct redundant channel scaling, and redundant multichannel disabling scenarios - add warning if max compound requests reached" * tag 'v6.8-rc3-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb: client: increase number of PDUs allowed in a compound request cifs: failure to add channel on iface should bump up weight cifs: do not search for channel if server is terminating cifs: avoid redundant calls to disable multichannel cifs: make sure that channel scaling is done only once -
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Chandan Babu: - Clear XFS_ATTR_INCOMPLETE filter on removing xattr from a node format attribute fork - Remove conditional compilation of realtime geometry validator functions to prevent confusing error messages from being printed on the console during the mount operation * tag 'xfs-6.8-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: remove conditional building of rt geometry validator functions xfs: reset XFS_ATTR_INCOMPLETE filter on node removal
-
