- 22 Feb, 2018 7 commits
-
-
Johnson Lin authored
Some panels support limited range output (16-235) compared to full range RGB values (0-255). Also userspace can control the RGB range using "Broadcast RGB" property. Currently the code to handle full range to limited range is broken. This patch fixes the same by properly scaling down all the full range co-efficients with limited range scaling factor. v2: Fixed Ville's review comments. v3: Changed input to const and used correct data types as suggested by Ville v4: Fixed some missing data type corrections. Signed-off-by:Johnson Lin <johnson.lin@intel.com> Signed-off-by:
Uma Shankar <uma.shankar@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Tvrtko Ursulin authored
Slightly smaller code and a bit more logical layout. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180222111658.4999-1-tvrtko.ursulin@linux.intel.com
-
Lionel Landwerlin authored
It turns out that HSW has a register that tells us how many EUs are disabled per half-slice (roughly a similar notion to subslice). We didn't read those registers so far as most userspace drivers didn't need those values prior to Gen8, but an internal library would like to have access to this. Since we already have the getparam interface, there is no harm in exposing this. v2: Rename bits value (Joonas) v3: s/GEM_BUG_ON/MISSING_CASE/ (Joonas) v4: s/GEM_BUG_ON/MISSING_CASE/ again... (Lionel) Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180221204902.23084-1-lionel.g.landwerlin@intel.com
-
Tvrtko Ursulin authored
Show GEN11 specific interrupt registers in debugfs v2: Update for POR changes. (Daniele Ceraolo Spurio) v3: get runtime pm ref. unify common parts with gen8 (Daniele) Cc: Ceraolo Spurio, Daniele <daniele.ceraolospurio@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180220153755.13509-2-mika.kuoppala@linux.intel.com
-
Paulo Zanoni authored
This is the current PCI ID list in our documentation. Let's leave the _gt#_ part out for now since our current documentation is not 100% clear and we don't need this info now anyway. v2: Use the new ICL_11 naming (Kelvin Gardiner). v3: Latest IDs as per BSpec (Oscar). v4: Make it compile (Paulo). v5: Remove comments (Lucas). v6: Multile rebases (Paulo). v7: Rebase (Mika) Reviewed-by: Anuj Phogat <anuj.phogat@intel.com> (v1) Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Oscar Mateo <oscar.mateo@intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180220153755.13509-1-mika.kuoppala@linux.intel.com
-
Chris Wilson authored
Print out the current request/context before doing the GEM_BUG_ON, so that we can inspect the values in the ftrace. Signed-off-by:
-
Chris Wilson authored
Include a GEM_TRACE to show when the context is complete and we advance the ELSP port. Signed-off-by:
-
- 21 Feb, 2018 6 commits
-
-
Chris Wilson authored
Load an empty ringbuffer for preemption, ignoring the lite-restore workaround as we know the preempt context is always idle before preemption. Note that after some digging by Michal Winiarski, we found that RING_HEAD is no longer being updated (due to inhibiting context save restore) so this patch is already in effect! Signed-off-by:
-
Chris Wilson authored
We want to de-emphasize the link between the request (dependency, execution and fence tracking) from GEM and so rename the struct from drm_i915_gem_request to i915_request. That is we may implement the GEM user interface on top of requests, but they are an abstraction for tracking execution rather than an implementation detail of GEM. (Since they are not tied to HW, we keep the i915 prefix as opposed to intel.) In short, the spatch: @@ @@ - struct drm_i915_gem_request + struct i915_request A corollary to contracting the type name, we also harmonise on using 'rq' shorthand for local variables where space if of the essence and repetition makes 'request' unwieldy. For globals and struct members, 'request' is still much preferred for its clarity. Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Acked-by:
-
Dhinakaran Pandiyan authored
No code changes, fixes doc build warnings and polish some doc text. Reported-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
Daniel Vetter authored
Noticed while reading some unrelated patches. Unfortunately Imre's patch to add our early/late hooks predated the device_link infrastructure by 2 years. Cc: Imre Deak <imre.deak@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Acked-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180220132017.30719-1-daniel.vetter@ffwll.ch
-
Tvrtko Ursulin authored
Commit fe49789f ("drm/i915: Deconstruct execute fence") re-arranged the code and moved the i915_gem_request_execute tracepoint to before the global seqno is assigned to the request. We need to move the tracepoint a bit later so this information is once again available. Signed-off-by:
-
Joonas Lahtinen authored
Signed-off-by:
-
- 20 Feb, 2018 9 commits
-
-
Chris Wilson authored
Rather than trusting the cached value of plane_state->vma->fence to imply whether the plane_state itself holds a reference on the framebuffer's fence, use the information provided in the plane_state->flags (PLANE_HAS_FENCE). Note that we still assume that FBC is entirely bounded by the plane_state active life span; it's not clear if that is a safe assumption. Suggested-by:
-
Chris Wilson authored
Use the information about the fence state from the time of pinning to determine if the fbdev writes are going through a fence. This avoids any confusion in cases where the fence may appear or disappear unconnected to the use by fbdev. Suggested-by:
-
Chris Wilson authored
Currently we make the unilateral decision inside i915_gem_object_pin_to_display() where the VMA should resided (inside the fence and mappable region or above?). This is not our decision to make as it impacts on how the display engine can use the resulting scanout object, and it would rather instruct us where to place the VMA so that it can enable the features it wants. As such, make the pin flags an argument to i915_gem_object_pin_to_display() and control them from intel_pin_and_fence_fb_obj() Whilst taking control of the mapping for ourselves, start tracking how we use it to avoid trying to free a fence we never claimed: <3>[ 227.151869] GEM_BUG_ON(vma->fence->pin_count <= 0) <4>[ 227.152064] ------------[ cut here ]------------ <2>[ 227.152068] kernel BUG at drivers/gpu/drm/i915/i915_vma.h:391! <4>[ 227.152084] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI <0>[ 227.152092] Dumping ftrace buffer: <0>[ 227.152099] (ftrace buffer empty) <4>[ 227.152102] Modules linked in: i915 snd_hda_codec_analog snd_hda_codec_generic coretemp snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm lpc_ich e1000e mei_me mei prime_numbers <4>[ 227.152131] CPU: 1 PID: 1587 Comm: kworker/u16:49 Tainted: G U 4.16.0-rc1-gbab67b2f6177-kasan_7+ #1 <4>[ 227.152134] Hardware name: Dell Inc. OptiPlex 755 /0PU052, BIOS A08 02/19/2008 <4>[ 227.152236] Workqueue: events_unbound intel_atomic_commit_work [i915] <4>[ 227.152292] RIP: 0010:intel_unpin_fb_vma+0x23a/0x2a0 [i915] <4>[ 227.152295] RSP: 0018:ffff88005aad7b68 EFLAGS: 00010286 <4>[ 227.152300] RAX: 0000000000000026 RBX: ffff88005c359580 RCX: 0000000000000000 <4>[ 227.152304] RDX: 0000000000000026 RSI: ffffffff8707d840 RDI: ffffed000b55af63 <4>[ 227.152307] RBP: ffff880056817e58 R08: 0000000000000001 R09: 0000000000000000 <4>[ 227.152311] R10: ffff88005aad7b88 R11: 0000000000000000 R12: ffff8800568184d0 <4>[ 227.152314] R13: ffff880065b5ab08 R14: 0000000000000000 R15: dffffc0000000000 <4>[ 227.152318] FS: 0000000000000000(0000) GS:ffff88006ac40000(0000) knlGS:0000000000000000 <4>[ 227.152322] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 227.152325] CR2: 00007f5fb25550a8 CR3: 0000000068c78000 CR4: 00000000000006e0 <4>[ 227.152328] Call Trace: <4>[ 227.152385] intel_cleanup_plane_fb+0x6b/0xd0 [i915] <4>[ 227.152395] drm_atomic_helper_cleanup_planes+0x166/0x280 <4>[ 227.152452] intel_atomic_commit_tail+0x159d/0x3380 [i915] <4>[ 227.152463] ? process_one_work+0x66e/0x1460 <4>[ 227.152516] ? skl_update_crtcs+0x9c0/0x9c0 [i915] <4>[ 227.152523] ? lock_acquire+0x13d/0x390 <4>[ 227.152527] ? lock_acquire+0x13d/0x390 <4>[ 227.152534] process_one_work+0x71a/0x1460 <4>[ 227.152540] ? __schedule+0x815/0x1e20 <4>[ 227.152547] ? pwq_dec_nr_in_flight+0x2b0/0x2b0 <4>[ 227.152553] ? _raw_spin_lock_irq+0xa/0x40 <4>[ 227.152559] worker_thread+0xdf/0xf60 <4>[ 227.152569] ? process_one_work+0x1460/0x1460 <4>[ 227.152573] kthread+0x2cf/0x3c0 <4>[ 227.152578] ? _kthread_create_on_node+0xa0/0xa0 <4>[ 227.152583] ret_from_fork+0x3a/0x50 <4>[ 227.152591] Code: c6 00 11 86 c0 48 c7 c7 e0 bd 85 c0 e8 60 e7 a9 c4 0f ff e9 1f fe ff ff 48 c7 c6 40 10 86 c0 48 c7 c7 e0 ca 85 c0 e8 2b 95 bd c4 <0f> 0b 48 89 ef e8 4c 44 e8 c4 e9 ef fd ff ff e8 42 44 e8 c4 e9 <1>[ 227.152720] RIP: intel_unpin_fb_vma+0x23a/0x2a0 [i915] RSP: ffff88005aad7b68 v2: i915_vma_pin_fence() is a no-op if a fence isn't required, so check vma->fence as well. Signed-off-by:
-
Chris Wilson authored
We cannot simply use !view as shorthand for all normal GGTT views as a few callers will always populate a i915_ggtt_view struct and set the type to NORMAL instead. So check for (!view || view->type == NORMAL) inside i915_gem_object_ggtt_pin(). Signed-off-by:
-
Ville Syrjälä authored
WaDoubleCursorLP3Latency was meant for pre-production hardware. Drop it. Signed-off-by:
Mika Kahola <mika.kahola@intel.com>
-
Ville Syrjälä authored
i965 and g4x still have the pipe select bits in the plane control registers, they're just hardcoded to select a specific pipe. However plane C on i965 can still move between the pipes, thus we should program the pipe select bits on i965 if we want to expose plane C some day. Since there is no harm in programming the bits on any plane on i965/g4x let's just always set them. This will also make our pre-computed register value match what the hardware register would read, should we want to cross check the two. Signed-off-by:
-
Ville Syrjälä authored
G4x cursor control registers still allow us to write to the pipe select bits even though cursors are supposed to be fixed to a specific pipe. Bspec tells us that we should only ever write 0 to these bits. Let's follow that recommendation. On ilk+ the bits become hardwired to 0. Also looks like ICL repurposes these bits for some other use, so we had better stop setting them to bogus values there. Signed-off-by:
-
Ville Syrjälä authored
Add some compile time assrts to the frontbuffer tracking to make sure that we have enough bits per pipe to cover all the planes, and that we have enough total bits to cover all the planes across all pipes. We'll ignore any potential clash between the overlay bit and the plane bits because that will allow us to keep using a total of 32 bits for the foreseeable future. While at it change the macros to use BIT() and GENMASK(). The latter gets rid of the hardcoded 0xff and thus means we can change the number of bits per pipe by just changing INTEL_FRONTBUFFER_BITS_PER_PIPE. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Chris Wilson authored
During igt, we frequently call into the driver to reset both HW and driver state (idling the device, waiting for it to become idle and freeing off old objects) to ensure that we start each test/subtest/pass from known state. This process incurs an RCU barrier or two to ensure that any such pending frees are indeed flushed before we return. However, unconditionally waiting on the RCU barrier adds needless delay to many callers, which adds up to several seconds when repeated thousands of times. We can skip the rcu_barrier() if by tracking how many outstanding frees we have, we know there are none. The same path is used along suspend, where we may be able to save the unconditional RCU barrier. To put it into perspective with a completely meaningless microbenchmark, igt/gem_sync/idle is improved from 50ms to 30us on bdw. v2: Remove the extra synchronize_rcu() inside i915_drop_caches_set() Signed-off-by:
-
- 19 Feb, 2018 7 commits
-
-
Chris Wilson authored
clang spots drivers/gpu/drm/i915/intel_pm.c:4655:6: warning: variable 'trans_min' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] if (INTEL_GEN(dev_priv) >= 10) but fortunately for us we skip the function unless on a gen10+ device. However, to keep the function generic in case we do want to re-enable it for gen9 again, initialise trans_min to 0. References: ca47667f ("drm/i915/gen10: Calculate and enable transition WM") Signed-off-by: -
Chris Wilson authored
If we fail to unbind the vma (due to a signal on an active buffer that needs to be moved for the next execbuf), then we need to clear the persistent tracking state we setup for this execbuf. Fixes: c7c6e46f ("drm/i915: Convert execbuf to use struct-of-array packing for critical fields") Testcase: igt/gem_fenced_exec_thrash/no-spare-fences-busy* Signed-off-by:
-
Chris Wilson authored
The compiler is not automatically caching the i915->regs address inside a register and emitting a load for every mmio access. For simple functions like gen8_gt_irq_handler that are already using the raw accessors, we can open-code them for substantial savings: add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-83 (-83) Function old new delta gen8_gt_irq_handler 290 266 -24 gen8_gt_irq_ack 181 122 -59 Total: Before=954637, After=954554, chg -0.01% v2: Add raw_reg_read/raw_reg_write. Signed-off-by:
-
Chris Wilson authored
Keep the master iir and use it to reduce the number of reads and writes to the GT iir array, i.e. only the bits marked as set by the master iir are valid inside GT iir array and will be handled during the interrupt. Signed-off-by:
-
Chris Wilson authored
As the driver is called to handle circumstances beyond it's control, we cannot assume that the pm_runtime core is happy to see us. For example, if we are called from shrink_slab to free up our pages during suspend, rpm may be disabled and pm_runtime_if_in_use() decides to fail with -EINVAL rather than simply say no. This is expected to happen, so don't warn. For example, [ 217.429228] Suspending console(s) (use no_console_suspend to debug) [ 217.557179] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 217.559399] sd 0:0:0:0: [sda] Stopping disk [ 218.661567] i915 0000:00:02.0: Resetting chip after gpu hang [ 219.523879] ------------[ cut here ]------------ [ 219.524474] pm_runtime_get_if_in_use() failed: -22 [ 219.524817] WARNING: CPU: 1 PID: 14 at drivers/gpu/drm/i915/intel_runtime_pm.c:3351 intel_runtime_pm_get_if_in_use+0xe3/0x150 [i915] [ 219.524836] Modules linked in: vgem i915 snd_hda_codec_realtek snd_hda_codec_generic coretemp snd_hda_intel snd_hda_codec r8169 lpc_ich snd_hwdep mii snd_hda_core snd_pcm prime_numbers [ 219.525054] CPU: 1 PID: 14 Comm: cpuhp/1 Tainted: G U 4.16.0-rc1-g740f57c54ecf-kasan_6+ #1 [ 219.525070] Hardware name: /D510MO, BIOS MOPNV10J.86A.0311.2010.0802.2346 08/02/2010 [ 219.525294] RIP: 0010:intel_runtime_pm_get_if_in_use+0xe3/0x150 [i915] [ 219.525313] RSP: 0018:ffff880018f5edf8 EFLAGS: 00010286 [ 219.525344] RAX: dffffc0000000008 RBX: ffff880007fc0000 RCX: 0000000000000000 [ 219.525361] RDX: 0000000000000001 RSI: ffffffff850609c0 RDI: ffffffff872992a0 [ 219.525377] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 [ 219.525394] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880007fc0000 [ 219.525411] R13: ffff880018f5f0f8 R14: ffff880007fc8de8 R15: ffff880018f5f0f0 [ 219.525429] FS: 0000000000000000(0000) GS:ffff880019c80000(0000) knlGS:0000000000000000 [ 219.525446] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 219.525463] CR2: 0000564df7897e86 CR3: 0000000000d7c000 CR4: 00000000000006e0 [ 219.525478] Call Trace: [ 219.525734] i915_gem_shrink+0x841/0xb50 [i915] [ 219.525802] ? debug_check_no_locks_freed+0x2a0/0x2a0 [ 219.525842] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 219.526083] ? i915_gem_shrinker_count+0x2f0/0x2f0 [i915] [ 219.526131] ? lock_acquire+0x138/0x3c0 [ 219.526157] ? lock_acquire+0x138/0x3c0 [ 219.526391] ? shrinker_lock+0x49/0x210 [i915] [ 219.526465] ? mutex_trylock+0x15c/0x1a0 [ 219.526694] ? shrinker_lock+0x49/0x210 [i915] [ 219.526969] ? i915_gem_shrinker_scan+0xc4/0x320 [i915] [ 219.527200] i915_gem_shrinker_scan+0xc4/0x320 [i915] [ 219.527448] ? i915_gem_shrinker_vmap+0x3a0/0x3a0 [i915] [ 219.527533] shrink_slab.part.18+0x2d0/0x8d0 [ 219.527613] ? unregister_shrinker+0x1f0/0x1f0 [ 219.527668] ? mem_cgroup_iter+0x37d/0xc50 [ 219.527728] shrink_node+0x882/0xbe0 [ 219.527847] ? shrink_node_memcg+0x11c0/0x11c0 [ 219.527882] ? mark_held_locks+0xa8/0xf0 [ 219.527931] ? trace_hardirqs_on_caller+0x33f/0x590 [ 219.527961] ? ktime_get+0xad/0x140 [ 219.528015] do_try_to_free_pages+0x2d3/0xd70 [ 219.528099] ? allow_direct_reclaim.part.23+0x1d0/0x1d0 [ 219.528132] ? shrink_node+0xbe0/0xbe0 [ 219.528213] try_to_free_pages+0x1cd/0x570 [ 219.528257] ? do_try_to_free_pages+0xd70/0xd70 [ 219.528355] __alloc_pages_nodemask+0xadf/0x2110 [ 219.528423] ? unwind_next_frame+0x870/0x1970 [ 219.528465] ? deref_stack_reg+0x97/0xc0 [ 219.528503] ? gfp_pfmemalloc_allowed+0x150/0x150 [ 219.528539] ? register_sched_domain_sysctl+0x23a/0x1b90 [ 219.528588] ? unwind_next_frame+0x138/0x1970 [ 219.528619] ? kthread+0x30a/0x3d0 [ 219.528677] ? __read_once_size_nocheck.constprop.4+0x10/0x10 [ 219.528698] ? deref_stack_reg+0xc0/0xc0 [ 219.528762] ? __save_stack_trace+0x6e/0xd0 [ 219.528822] depot_save_stack+0x3bc/0x430 [ 219.528870] kasan_kmalloc+0x142/0x170 [ 219.528912] ? __kmalloc+0xf7/0x340 [ 219.528935] ? register_sched_domain_sysctl+0x23a/0x1b90 [ 219.528957] ? partition_sched_domains+0x4d4/0x840 [ 219.528978] ? sched_cpu_deactivate+0x11b/0x150 [ 219.529001] ? cpuhp_invoke_callback+0x160/0x15f0 [ 219.529023] ? cpuhp_thread_fun+0x35e/0x710 [ 219.529044] ? smpboot_thread_fn+0x50a/0x7f0 [ 219.529065] ? kthread+0x30a/0x3d0 [ 219.529086] ? ret_from_fork+0x24/0x50 [ 219.529141] ? register_sched_domain_sysctl+0x23a/0x1b90 [ 219.529169] ? register_sched_domain_sysctl+0x23a/0x1b90 [ 219.529198] ? set_track+0x87/0x100 [ 219.529225] ? init_object+0x6e/0x80 [ 219.529275] ? ___slab_alloc.constprop.36+0x232/0x3e0 [ 219.529303] ? ___slab_alloc.constprop.36+0x232/0x3e0 [ 219.529325] ? register_sched_domain_sysctl+0x23a/0x1b90 [ 219.529410] ? mark_held_locks+0xa8/0xf0 [ 219.529453] ? register_sched_domain_sysctl+0x23a/0x1b90 [ 219.529479] ? trace_hardirqs_on_caller+0x33f/0x590 [ 219.529532] __kmalloc+0xf7/0x340 [ 219.529557] ? register_sched_domain_sysctl+0x23a/0x1b90 [ 219.529604] register_sched_domain_sysctl+0x23a/0x1b90 [ 219.529684] ? sched_debug_show+0x20/0x20 [ 219.529713] ? debug_object_activate+0x530/0x530 [ 219.529771] ? rcu_lockdep_current_cpu_online+0xdc/0x130 [ 219.529802] ? partition_sched_domains+0x4ae/0x840 [ 219.529825] ? rcu_read_lock_sched_held+0x10f/0x130 [ 219.529875] partition_sched_domains+0x4d4/0x840 [ 219.529955] ? sched_init_domains+0x110/0x110 [ 219.529981] ? __wait_rcu_gp+0x24f/0x390 [ 219.530054] sched_cpu_deactivate+0x11b/0x150 [ 219.530086] ? sched_cpu_activate+0x1e0/0x1e0 [ 219.530112] ? __call_rcu.constprop.53+0x680/0x680 [ 219.530132] ? call_rcu_bh+0x10/0x10 [ 219.530166] ? debug_check_no_locks_freed+0x2a0/0x2a0 [ 219.530201] ? trace_raw_output_rcu_utilization+0xa0/0xa0 [ 219.530267] ? trace_raw_output_rcu_utilization+0xa0/0xa0 [ 219.530337] ? rcu_lockdep_current_cpu_online+0xdc/0x130 [ 219.530370] ? sched_cpu_activate+0x1e0/0x1e0 [ 219.530397] cpuhp_invoke_callback+0x160/0x15f0 [ 219.530424] ? lock_acquire+0x138/0x3c0 [ 219.530445] ? lock_acquire+0x138/0x3c0 [ 219.530471] ? cpuhp_thread_fun+0xaf/0x710 [ 219.530507] ? pci_mmcfg_check_reserved+0x100/0x100 [ 219.530565] cpuhp_thread_fun+0x35e/0x710 [ 219.530618] ? cpuhp_complete_idle_dead+0x10/0x10 [ 219.530639] smpboot_thread_fn+0x50a/0x7f0 [ 219.530678] ? sort_range+0x20/0x20 [ 219.530709] ? __kthread_parkme+0xba/0x1f0 [ 219.530739] ? schedule+0x84/0x1a0 [ 219.530768] ? __kthread_parkme+0xbf/0x1f0 [ 219.530805] ? sort_range+0x20/0x20 [ 219.530831] kthread+0x30a/0x3d0 [ 219.530859] ? _kthread_create_on_node+0xb0/0xb0 [ 219.530900] ret_from_fork+0x24/0x50 [ 219.530999] Code: 01 00 00 00 85 c0 74 4a 89 e8 5b 5d c3 80 3d 48 37 4e 00 00 75 f2 89 c6 48 c7 c7 40 f0 61 c0 c6 05 36 37 4e 00 01 e8 ed 2a e1 c2 <0f> ff eb d9 80 3d 3f 37 4e 00 00 75 94 48 c7 c7 60 e8 61 c0 c6 [ 219.531880] ---[ end trace 18ec0139488ea0c8 ]--- [ 219.607967] IRQ 16: no longer affine to CPU1 [ 219.670291] IRQ 24: no longer affine to CPU2 [ 219.701489] IRQ 8: no longer affine to CPU3 [ 219.701529] IRQ 9: no longer affine to CPU3 [ 219.701582] IRQ 18: no longer affine to CPU3 [ 219.701640] IRQ 25: no longer affine to CPU3 [ 219.743857] cache: parent cpu1 should not be sleeping [ 219.784549] cache: parent cpu2 should not be sleeping [ 219.816041] cache: parent cpu3 should not be sleeping v2: Add Returns: information to intel_runtime_pm_get_if_in_use() kerneldoc. Signed-off-by:
-
Mauro Carvalho Chehab authored
The in-lined comments for channel.port doesn't follow the syntax described at kernel-doc document, causing the following warning: $ ./scripts/kernel-doc -none drivers/gpu/drm/i915/intel_dpio_phy.c drivers/gpu/drm/i915/intel_dpio_phy.c:154: warning: Function parameter or member 'channel.port' not described in 'bxt_ddi_phy_info' While the best would be for the Kernel to deduce that from the context, supporting it is not trivial. So, let's just stick with the existing syntax. [Jani: depends on "scripts: kernel-doc: support in-line comments on nested structs/unions" to actually fix the warning.] Reported-by:
Jani Nikula <jani.nikula@intel.com> Tested-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Maarten Lankhorst authored
Hitting the failure path through check_digital_port_conflicts triggers: ================================================ WARNING: lock held when returning to user space! 4.16.0-rc1-CI-kasan_1+ #1 Tainted: G W ------------------------------------------------ kms_3d/1439 is leaving the kernel with locks still held! 1 lock held by kms_3d/1439: #0: (drm_connector_list_iter){.+.+}, at: [<000000003745d183>] intel_atomic_check+0x1d9d/0x3ff0 [i915] Rearrange the code to have a single exit path through the unlock. Signed-off-by:Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reported-by:
-
- 16 Feb, 2018 3 commits
-
-
Chris Wilson authored
We can't assert that the execlists are active before we set the flag. So perform the assert after we are expected to have marked the execlists active. Fixes: 339ccd35 ("drm/i915: Assert that we always complete a submission to guc/execlists") Signed-off-by:
Tomi Sarvela <tomi.p.sarvela@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180216153210.30551-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
The continual resubmission model for execlists (and emulated over guc) requires that we keep feeding requests into the HW in order to generate more CS interrupts to drain the rest of the queue. Add a couple of asserts to ensure that we don't skip a cycle and come to a grinding halt. Signed-off-by:
-
Christian König authored
i915 is the only driver using those fields in the drm_gem_object structure, so they only waste memory for all other drivers. Move the fields into drm_i915_gem_object instead and patch the i915 code with the following sed commands: sed -i "s/obj->base.read_domains/obj->read_domains/g" drivers/gpu/drm/i915/*.c drivers/gpu/drm/i915/*/*.c sed -i "s/obj->base.write_domain/obj->write_domain/g" drivers/gpu/drm/i915/*.c drivers/gpu/drm/i915/*/*.c Change is only compile tested. v2: move fields around as suggested by Chris. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
-
- 15 Feb, 2018 8 commits
-
-
Mahesh Kumar authored
Register Address for CNL_PORT_DW5_LN0_D is 0x162E54, but current code is defining it as 0x162ED4. Similarly for CNL_PORT_DW7_LN0_D register address is defined 0x162EDC instead of 0x162E5C, fix it. Signed-off-by:
Mahesh Kumar <mahesh1.kumar@intel.com> Fixes: 04416108 ("drm/i915/cnl: Add registers related to voltage swing sequences.") Reviewed-by:
-
Dhinakaran Pandiyan authored
The frame counter may have got reset between disabling and enabling vblank interrupts due to DMC putting the hardware to DC5/6 states if PSR was active. The frame counter could also have stalled if PSR was active in case there was no DMC. The frame counter resetting has a user visible impact of screen freezes. Make use of drm_vblank_restore() to compute missed vblanks for the duration in which vblank interrupts were disabled and update the vblank counter with this value as diff. There's no need to check if PSR was actually active in the interrupt disabled duration, so simplify the check to a feature check. Enabling vblank interrupts wakes up the hardware from DC5/6 and prevents it from going back again as long as the there are pending interrupts. So, we don't have to explicity disallow DC5/6 after enabling vblank interrupts to keep the counter running. This change is not applicable to CHV, as enabling interrupts does not prevent the hardware from activating PSR. v2: Added comments(Rodrigo) and rewrote commit message. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
The HW frame counter can get reset if device enters a low power state after vblank interrupts were disabled. This messes up any following vblank count update as a negative diff (huge unsigned diff) is calculated from the HW frame counter change. We cannot ignore negative diffs altogther as there could be legitimate wrap arounds. So, allow drivers to update vblank->count with missed vblanks for the time interrupts were disabled. This is similar to _crtc_vblank_on() except that vblanks interrupts are not enabled at the end as this function is expected to be called from the driver _enable_vblank() vfunc. v2: drm_crtc_vblank_restore should take crtc as arg. (Chris) Add docs and sprinkle some asserts. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Dänzer <michel@daenzer.net> Signed-off-by: -
Dhinakaran Pandiyan authored
Updating vblank counts requires register reads and these reads may not return meaningful values if the device was in a low power state after vblank interrupts were last disabled. So, update the count only if vblank interrupts are enabled. Secondly, this means the registers should be read before disabling vblank interrupts. v2: Don't check vblank->enabled outside it's lock (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Michel Dänzer <michel@daenzer.net> Signed-off-by:
-
Dhinakaran Pandiyan authored
570e8696 ("drm: Widen vblank count to 64-bits [v3]") changed the return type for drm_crtc_vblank_count() to u64. The flip ioctl receives a 32-bit target sequence from user space and is compared against the current sequence from drm_crtc_vblank_count(). So, typecast return from drm_crtc_vblank_count() explicitly to add clarity. __drm_crtcs_state.last_vblank_count however only ever stores the value from drm_crtc_vblank_count() and can be upgraded to u64. Cc: Keith Packard <keithp@keithp.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
570e8696 ("drm: Widen vblank count to 64-bits [v3]") changed the return type for drm_crtc_vblank_count() to u64. This could cause potential problems if the return value is used in arithmetic operations with a 32-bit reference HW vblank count. Explicitly typecasting this down to u32 either fixes a potential problem or serves to add clarity in case the implicit typecasting was already correct. Cc: Keith Packard <keithp@keithp.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
570e8696 ("drm: Widen vblank count to 64-bits [v3]") changed the return type for drm_crtc_vblank_count() to u64. This could cause potential problems if the return value is used in arithmetic operations with a 32-bit reference HW vblank count. Explicitly typecasting this down to u32 either fixes a potential problem or serves to add clarity in case the implicit typecasting was already correct. Cc: Keith Packard <keithp@keithp.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
570e8696 ("drm: Widen vblank count to 64-bits [v3]") changed the return type for drm_crtc_vblank_count() to u64. This could cause potential problems if the return value is used in arithmetic operations with a 32-bit reference HW vblank count. Explicitly typecasting this down to u32 either fixes a potential problem or serves to add clarity in case the typecasting was implicitly done. Cc: Keith Packard <keithp@keithp.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> for both this patch Signed-off-by:
-
