Skip to content

L
linux
Switch branch/tag
  1. 13 Oct, 2023 3 commits
    • Ido Schimmel's avatar
      selftests: fib_tests: Disable RP filter in multipath list receive test · dbb13378
      Ido Schimmel authored 
      The test relies on the fib:fib_table_lookup trace point being triggered
once for each forwarded packet. If RP filter is not disabled, the trace
point will be triggered twice for each packet (for source validation and
forwarding), potentially masking actual bugs. Fix by explicitly
disabling RP filter.

Before:

 # ./fib_tests.sh -t ipv4_mpath_list

 IPv4 multipath list receive tests
     TEST: Multipath route hit ratio (1.99)                              [ OK ]

After:

 # ./fib_tests.sh -t ipv4_mpath_list

 IPv4 multipath list receive tests
     TEST: Multipath route hit ratio (.99)                               [ OK ]

Fixes: 8ae9efb8 ("selftests: fib_tests: Add multipath list receive tests")
Reported-by: default avatarkernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/netdev/202309191658.c00d8b8-oliver.sang@intel.com/Tested-by: default avatarkernel test robot <oliver.sang@intel.com>
Signed-off-by: default avatarIdo Schimmel <idosch@nvidia.com>
Reviewed-by: default avatarDavid Ahern <dsahern@kernel.org>
Tested-by: default avatarSriram Yagnaraman <sriram.yagnaraman@est.tech>
Link: https://lore.kernel.org/r/20231010132113.3014691-2-idosch@nvidia.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      dbb13378
    • Kuniyuki Iwashima's avatar
      tcp: Fix listen() warning with v4-mapped-v6 address. · 8702cf12
      Kuniyuki Iwashima authored 
      syzbot reported a warning [0] introduced by commit c48ef9c4 ("tcp: Fix
bind() regression for v4-mapped-v6 non-wildcard address.").

After the cited commit, a v4 socket's address matches the corresponding
v4-mapped-v6 tb2 in inet_bind2_bucket_match_addr(), not vice versa.

During X.X.X.X -> ::ffff:X.X.X.X order bind()s, the second bind() uses
bhash and conflicts properly without checking bhash2 so that we need not
check if a v4-mapped-v6 sk matches the corresponding v4 address tb2 in
inet_bind2_bucket_match_addr().  However, the repro shows that we need
to check that in a no-conflict case.

The repro bind()s two sockets to the 2-tuples using SO_REUSEPORT and calls
listen() for the first socket:

  from socket import *

  s1 = socket()
  s1.setsockopt(SOL_SOCKET, SO_REUSEPORT, 1)
  s1.bind(('127.0.0.1', 0))

  s2 = socket(AF_INET6)
  s2.setsockopt(SOL_SOCKET, SO_REUSEPORT, 1)
  s2.bind(('::ffff:127.0.0.1', s1.getsockname()[1]))

  s1.listen()

The second socket should belong to the first socket's tb2, but the second
bind() creates another tb2 bucket because inet_bind2_bucket_find() returns
NULL in inet_csk_get_port() as the v4-mapped-v6 sk does not match the
corresponding v4 address tb2.

  bhash2[] -> tb2(::ffff:X.X.X.X) -> tb2(X.X.X.X)

Then, listen() for the first socket calls inet_csk_get_port(), where the
v4 address matches the v4-mapped-v6 tb2 and WARN_ON() is triggered.

To avoid that, we need to check if v4-mapped-v6 sk address matches with
the corresponding v4 address tb2 in inet_bind2_bucket_match().

The same checks are needed in inet_bind2_bucket_addr_match() too, so we
can move all checks there and call it from inet_bind2_bucket_match().

Note that now tb->family is just an address family of tb->(v6_)?rcv_saddr
and not of sockets in the bucket.  This could be refactored later by
defining tb->rcv_saddr as tb->v6_rcv_saddr.s6_addr32[3] and prepending
::ffff: when creating v4 tb2.

[0]:
WARNING: CPU: 0 PID: 5049 at net/ipv4/inet_connection_sock.c:587 inet_csk_get_port+0xf96/0x2350 net/ipv4/inet_connection_sock.c:587
Modules linked in:
CPU: 0 PID: 5049 Comm: syz-executor288 Not tainted 6.6.0-rc2-syzkaller-00018-g2cf0f715 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023
RIP: 0010:inet_csk_get_port+0xf96/0x2350 net/ipv4/inet_connection_sock.c:587
Code: 7c 24 08 e8 4c b6 8a 01 31 d2 be 88 01 00 00 48 c7 c7 e0 94 ae 8b e8 59 2e a3 f8 2e 2e 2e 31 c0 e9 04 fe ff ff e8 ca 88 d0 f8 <0f> 0b e9 0f f9 ff ff e8 be 88 d0 f8 49 8d 7e 48 e8 65 ca 5a 00 31
RSP: 0018:ffffc90003abfbf0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888026429100 RCX: 0000000000000000
RDX: ffff88807edcbb80 RSI: ffffffff88b73d66 RDI: ffff888026c49f38
RBP: ffff888026c49f30 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff9260f200
R13: ffff888026c49880 R14: 0000000000000000 R15: ffff888026429100
FS:  00005555557d5380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000045ad50 CR3: 0000000025754000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 inet_csk_listen_start+0x155/0x360 net/ipv4/inet_connection_sock.c:1256
 __inet_listen_sk+0x1b8/0x5c0 net/ipv4/af_inet.c:217
 inet_listen+0x93/0xd0 net/ipv4/af_inet.c:239
 __sys_listen+0x194/0x270 net/socket.c:1866
 __do_sys_listen net/socket.c:1875 [inline]
 __se_sys_listen net/socket.c:1873 [inline]
 __x64_sys_listen+0x53/0x80 net/socket.c:1873
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f3a5bce3af9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 c1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc1a1c79e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000032
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3a5bce3af9
RDX: 00007f3a5bce3af9 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00007f3a5bd565f0 R08: 0000000000000006 R09: 0000000000000006
R10: 0000000000000006 R11: 0000000000000246 R12: 0000000000000001
R13: 431bde82d7b634db R14: 0000000000000001 R15: 0000000000000001
 </TASK>

Fixes: c48ef9c4 ("tcp: Fix bind() regression for v4-mapped-v6 non-wildcard address.")
Reported-by: syzbot+71e724675ba3958edb31@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=71e724675ba3958edb31Signed-off-by: default avatarKuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231010013814.70571-1-kuniyu@amazon.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      8702cf12
    • Jiri Wiesner's avatar
      bonding: Return pointer to data after pull on skb · d93f3f99
      Jiri Wiesner authored 
      Since 429e3d12 ("bonding: Fix extraction of ports from the packet
headers"), header offsets used to compute a hash in bond_xmit_hash() are
relative to skb->data and not skb->head. If the tail of the header buffer
of an skb really needs to be advanced and the operation is successful, the
pointer to the data must be returned (and not a pointer to the head of the
buffer).

Fixes: 429e3d12 ("bonding: Fix extraction of ports from the packet headers")
Signed-off-by: default avatarJiri Wiesner <jwiesner@suse.de>
Acked-by: default avatarJay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: default avatarJiri Pirko <jiri@nvidia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d93f3f99
  3. 12 Oct, 2023 14 commits
  5. 11 Oct, 2023 16 commits
  7. 10 Oct, 2023 7 commits
    • Ilya Leoshkevich's avatar
      s390/bpf: Fix unwinding past the trampoline · 5356ba1f
      Ilya Leoshkevich authored 
      When functions called by the trampoline panic, the backtrace that is
printed stops at the trampoline, because the trampoline does not store
its caller's frame address (backchain) on stack; it also stores the
return address at a wrong location.

Store both the same way as is already done for the regular eBPF programs.

Fixes: 528eb2cb ("s390/bpf: Implement arch_prepare_bpf_trampoline()")
Signed-off-by: default avatarIlya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231010203512.385819-3-iii@linux.ibm.com
      5356ba1f
    • Ilya Leoshkevich's avatar
      s390/bpf: Fix clobbering the caller's backchain in the trampoline · ce10fc06
      Ilya Leoshkevich authored 
      One of the first things that s390x kernel functions do is storing the
the caller's frame address (backchain) on stack. This makes unwinding
possible. The backchain is always stored at frame offset 152, which is
inside the 160-byte stack area, that the functions allocate for their
callees. The callees must preserve the backchain; the remaining 152
bytes they may use as they please.

Currently the trampoline uses all 160 bytes, clobbering the backchain.
This causes kernel panics when using __builtin_return_address() in
functions called by the trampoline.

Fix by reducing the usage of the caller-reserved stack area by 8 bytes
in the trampoline.

Fixes: 528eb2cb ("s390/bpf: Implement arch_prepare_bpf_trampoline()")
Reported-by: default avatarSong Liu <song@kernel.org>
Signed-off-by: default avatarIlya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231010203512.385819-2-iii@linux.ibm.com
      ce10fc06
    • Linus Torvalds's avatar
      Merge tag 'xsa441-6.6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip · 1c8b86a3
      Linus Torvalds authored 
      Pull xen fix from Juergen Gross:
 "A fix for the xen events driver:

  Closing of an event channel in the Linux kernel can result in a
  deadlock. This happens when the close is being performed in parallel
  to an unrelated Xen console action and the handling of a Xen console
  interrupt in an unprivileged guest.

  The closing of an event channel is e.g. triggered by removal of a
  paravirtual device on the other side. As this action will cause
  console messages to be issued on the other side quite often, the
  chance of triggering the deadlock is not negligible"

* tag 'xsa441-6.6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/events: replace evtchn_rwlock with RCU
      1c8b86a3
    • Sumit Garg's avatar
      KEYS: trusted: Remove redundant static calls usage · 01bbafc6
      Sumit Garg authored 
      Static calls invocations aren't well supported from module __init and
__exit functions. Especially the static call from cleanup_trusted() led
to a crash on x86 kernel with CONFIG_DEBUG_VIRTUAL=y.

However, the usage of static call invocations for trusted_key_init()
and trusted_key_exit() don't add any value from either a performance or
security perspective. Hence switch to use indirect function calls instead.

Note here that although it will fix the current crash report, ultimately
the static call infrastructure should be fixed to either support its
future usage from module __init and __exit functions or not.
Reported-and-tested-by: default avatarHyeonggon Yoo <42.hyeyoo@gmail.com>
Link: https://lore.kernel.org/lkml/ZRhKq6e5nF%2F4ZIV1@fedora/#t
Fixes: 5d0682be ("KEYS: trusted: Add generic trusted keys framework")
Signed-off-by: default avatarSumit Garg <sumit.garg@linaro.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      01bbafc6
    • Linus Torvalds's avatar
      Merge tag 'irq-urgent-2023-10-10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 87813e13
      Linus Torvalds authored 
      Pull irq fixes from Thomas Gleixner:
 "A set of updates for interrupt chip drivers:

   - Fix the fail of the Qualcomm PDC driver on v3.2 hardware which is
     caused by a control bit being moved to a different location

   - Update the SM8150 device tree PDC resource so the version register
     can be read

   - Make the Renesas RZG2L driver correct for interrupts which are
     outside of the LSB in the TSSR register by using the proper macro
     for calculating the mask

   - Document the Renesas RZ2GL device tree binding correctly and update
     them for a few devices which faul to boot otherwise

   - Use the proper accessor in the RZ2GL driver instead of blindly
     dereferencing an unchecked pointer

   - Make GICv3 handle the dma-non-coherent attribute correctly

   - Ensure that all interrupt controller nodes on RISCV are marked as
     initialized correctly

  Maintainer changes:

   - Add a new entry for GIC interrupt controllers and assign Marc
     Zyngier as the maintainer

   - Remove Marc Zyngier from the core and driver maintainer entries as
     he is burried in work and short of time to handle that.

  Thanks to Marc for all the great work he has done in the past couple
  of years!

  Also note that commit 5873d380 ("irqchip/qcom-pdc: Add support for
  v3.2 HW") has a incorrect SOB chain.

  The real author is Neil. His patch was posted by Dmitry once and Neil
  picked it up from the list and reposted it with the bogus SOB chain.

  Not a big deal, but worth to mention. I wanted to fix that up, but
  then got distracted and Marc piled more changes on top. So I decided
  to leave it as is instead of rebasing world"

* tag 'irq-urgent-2023-10-10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  MAINTAINERS: Remove myself from the general IRQ subsystem maintenance
  MAINTAINERS: Add myself as the ARM GIC maintainer
  irqchip/renesas-rzg2l: Convert to irq_data_get_irq_chip_data()
  irqchip/stm32-exti: add missing DT IRQ flag translation
  irqchip/riscv-intc: Mark all INTC nodes as initialized
  irqchip/gic-v3: Enable non-coherent redistributors/ITSes DT probing
  irqchip/gic-v3-its: Split allocation from initialisation of its_node
  dt-bindings: interrupt-controller: arm,gic-v3: Add dma-noncoherent property
  dt-bindings: interrupt-controller: renesas,irqc: Add r8a779f0 support
  dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G2UL SoC
  irqchip: renesas-rzg2l: Fix logic to clear TINT interrupt source
  dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update description for '#interrupt-cells' property
  arm64: dts: qcom: sm8150: extend the size of the PDC resource
  irqchip/qcom-pdc: Add support for v3.2 HW
      87813e13
    • Linus Torvalds's avatar
      Merge tag 'hyperv-fixes-signed-20231009' of... · b711538a
      Linus Torvalds authored 
      Merge tag 'hyperv-fixes-signed-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv fixes from Wei Liu:

 - fixes for Hyper-V VTL code (Saurabh Sengar and Olaf Hering)

 - fix hv_kvp_daemon to support keyfile based connection profile
   (Shradha Gupta)

* tag 'hyperv-fixes-signed-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  hv/hv_kvp_daemon:Support for keyfile based connection profile
  hyperv: reduce size of ms_hyperv_info
  x86/hyperv: Add common print prefix "Hyper-V" in hv_init
  x86/hyperv: Remove hv_vtl_early_init initcall
  x86/hyperv: Restrict get_vtl to only VTL platforms
      b711538a
    • Linus Torvalds's avatar
      Merge tag 'v6.6-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 · 832b5d0b
      Linus Torvalds authored 
      Pull crypto fix from Herbert Xu:
 "Fix a regression in dm-crypt"

* tag 'v6.6-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  dm crypt: Fix reqsize in crypt_iv_eboiv_gen
      832b5d0b
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7