commit b1ac62a7 upstream.

Open-coding a timeout loop invariably leads to errors with handling
the timeout properly in one corner case or another.  In the case of
cqhci we might report "CQE stuck on" even if it wasn't stuck on.
You'd just need this sequence of events to happen in cqhci_off():

1. Call ktime_get().
2. Something happens to interrupt the CPU for > 100 us (context switch
   or interrupt).
3. Check time and; set "timed_out" to true since > 100 us.
4. Read CQHCI_CTL.
5. Both "reg & CQHCI_HALT" and "timed_out" are true, so break.
6. Since "timed_out" is true, falsely print the error message.

Rather than fixing the polling loop, use readx_poll_timeout() like
many people do.  This has been time tested to handle the corner cases.

Fixes: a4080225 ("mmc: cqhci: support for command queue enabled host")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200413162717.1.Idece266f5c8793193b57a1ddb1066d030c6af8e0@changeidSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fcc99734 upstream.

[BUG]
One run of btrfs/063 triggered the following lockdep warning:
  ============================================
  WARNING: possible recursive locking detected
  5.6.0-rc7-custom+ #48 Not tainted
  --------------------------------------------
  kworker/u24:0/7 is trying to acquire lock:
  ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs]

  but task is already holding lock:
  ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs]

  other info that might help us debug this:
   Possible unsafe locking scenario:

         CPU0
         ----
    lock(sb_internal#2);
    lock(sb_internal#2);

   *** DEADLOCK ***

   May be due to missing lock nesting notation

  4 locks held by kworker/u24:0/7:
   #0: ffff88817b495948 ((wq_completion)btrfs-endio-write){+.+.}, at: process_one_work+0x557/0xb80
   #1: ffff888189ea7db8 ((work_completion)(&work->normal_work)){+.+.}, at: process_one_work+0x557/0xb80
   #2: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs]
   #3: ffff888174ca4da8 (&fs_info->reloc_mutex){+.+.}, at: btrfs_record_root_in_trans+0x83/0xd0 [btrfs]

  stack backtrace:
  CPU: 0 PID: 7 Comm: kworker/u24:0 Not tainted 5.6.0-rc7-custom+ #48
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
  Call Trace:
   dump_stack+0xc2/0x11a
   __lock_acquire.cold+0xce/0x214
   lock_acquire+0xe6/0x210
   __sb_start_write+0x14e/0x290
   start_transaction+0x66c/0x890 [btrfs]
   btrfs_join_transaction+0x1d/0x20 [btrfs]
   find_free_extent+0x1504/0x1a50 [btrfs]
   btrfs_reserve_extent+0xd5/0x1f0 [btrfs]
   btrfs_alloc_tree_block+0x1ac/0x570 [btrfs]
   btrfs_copy_root+0x213/0x580 [btrfs]
   create_reloc_root+0x3bd/0x470 [btrfs]
   btrfs_init_reloc_root+0x2d2/0x310 [btrfs]
   record_root_in_trans+0x191/0x1d0 [btrfs]
   btrfs_record_root_in_trans+0x90/0xd0 [btrfs]
   start_transaction+0x16e/0x890 [btrfs]
   btrfs_join_transaction+0x1d/0x20 [btrfs]
   btrfs_finish_ordered_io+0x55d/0xcd0 [btrfs]
   finish_ordered_fn+0x15/0x20 [btrfs]
   btrfs_work_helper+0x116/0x9a0 [btrfs]
   process_one_work+0x632/0xb80
   worker_thread+0x80/0x690
   kthread+0x1a3/0x1f0
   ret_from_fork+0x27/0x50

It's pretty hard to reproduce, only one hit so far.

[CAUSE]
This is because we're calling btrfs_join_transaction() without re-using
the current running one:

btrfs_finish_ordered_io()
|- btrfs_join_transaction()		<<< Call #1
   |- btrfs_record_root_in_trans()
      |- btrfs_reserve_extent()
	 |- btrfs_join_transaction()	<<< Call #2

Normally such btrfs_join_transaction() call should re-use the existing
one, without trying to re-start a transaction.

But the problem is, in btrfs_join_transaction() call #1, we call
btrfs_record_root_in_trans() before initializing current::journal_info.

And in btrfs_join_transaction() call #2, we're relying on
current::journal_info to avoid such deadlock.

[FIX]
Call btrfs_record_root_in_trans() after we have initialized
current::journal_info.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f135cea3 upstream.

When we have an inode with a prealloc extent that starts at an offset
lower than the i_size and there is another prealloc extent that starts at
an offset beyond i_size, we can end up losing part of the first prealloc
extent (the part that starts at i_size) and have an implicit hole if we
fsync the file and then have a power failure.

Consider the following example with comments explaining how and why it
happens.

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt

  # Create our test file with 2 consecutive prealloc extents, each with a
  # size of 128Kb, and covering the range from 0 to 256Kb, with a file
  # size of 0.
  $ xfs_io -f -c "falloc -k 0 128K" /mnt/foo
  $ xfs_io -c "falloc -k 128K 128K" /mnt/foo

  # Fsync the file to record both extents in the log tree.
  $ xfs_io -c "fsync" /mnt/foo

  # Now do a redudant extent allocation for the range from 0 to 64Kb.
  # This will merely increase the file size from 0 to 64Kb. Instead we
  # could also do a truncate to set the file size to 64Kb.
  $ xfs_io -c "falloc 0 64K" /mnt/foo

  # Fsync the file, so we update the inode item in the log tree with the
  # new file size (64Kb). This also ends up setting the number of bytes
  # for the first prealloc extent to 64Kb. This is done by the truncation
  # at btrfs_log_prealloc_extents().
  # This means that if a power failure happens after this, a write into
  # the file range 64Kb to 128Kb will not use the prealloc extent and
  # will result in allocation of a new extent.
  $ xfs_io -c "fsync" /mnt/foo

  # Now set the file size to 256K with a truncate and then fsync the file.
  # Since no changes happened to the extents, the fsync only updates the
  # i_size in the inode item at the log tree. This results in an implicit
  # hole for the file range from 64Kb to 128Kb, something which fsck will
  # complain when not using the NO_HOLES feature if we replay the log
  # after a power failure.
  $ xfs_io -c "truncate 256K" -c "fsync" /mnt/foo

So instead of always truncating the log to the inode's current i_size at
btrfs_log_prealloc_extents(), check first if there's a prealloc extent
that starts at an offset lower than the i_size and with a length that
crosses the i_size - if there is one, just make sure we truncate to a
size that corresponds to the end offset of that prealloc extent, so
that we don't lose the part of that extent that starts at i_size if a
power failure happens.

A test case for fstests follows soon.

Fixes: 31d11b83 ("Btrfs: fix duplicate extents after fsync of file with prealloc extents")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fb739741 upstream.

Fix the SELinux netlink_send hook to properly handle multiple netlink
messages in a single sk_buff; each message is parsed and subject to
SELinux access control.  Prior to this patch, SELinux only inspected
the first message in the sk_buff.

Cc: stable@vger.kernel.org
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b9f96020 upstream.

Under some circumstances, i.e. when test is still running and about to
time out and user runs, for example,

	grep -H . /sys/module/dmatest/parameters/*

the iterations parameter is not respected and test is going on and on until
user gives

	echo 0 > /sys/module/dmatest/parameters/run

This is not what expected.

The history of this bug is interesting. I though that the commit
  2d88ce76 ("dmatest: add a 'wait' parameter")
is a culprit, but looking closer to the code I think it simple revealed the
broken logic from the day one, i.e. in the commit
  0a2ff57d ("dmaengine: dmatest: add a maximum number of test iterations")
which adds iterations parameter.

So, to the point, the conditional of checking the thread to be stopped being
first part of conjunction logic prevents to check iterations. Thus, we have to
always check both conditions to be able to stop after given iterations.

Since it wasn't visible before second commit appeared, I add a respective
Fixes tag.

Fixes: 2d88ce76 ("dmatest: add a 'wait' parameter")
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20200424161147.16895-1-andriy.shevchenko@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7648f939 upstream.

nfs3_set_acl keeps track of the acl it allocated locally to determine if an acl
needs to be released at the end.  This results in a memory leak when the
function allocates an acl as well as a default acl.  Fix by releasing acls
that differ from the acl originally passed into nfs3_set_acl.

Fixes: b7fa0554 ("[PATCH] NFS: Add support for NFSv3 ACLs")
Reported-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5ce00760 upstream.

gcc-10 points out a few instances of suspicious integer arithmetic
leading to value truncation:

sound/isa/opti9xx/opti92x-ad1848.c: In function 'snd_opti9xx_configure':
sound/isa/opti9xx/opti92x-ad1848.c:322:43: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_opti9xx_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow]
  322 |   (snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask)))
      |   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/opti92x-ad1848.c:351:3: note: in expansion of macro 'snd_opti9xx_write_mask'
  351 |   snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
      |   ^~~~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/miro.c: In function 'snd_miro_configure':
sound/isa/opti9xx/miro.c:873:40: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_miro_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow]
  873 |   (snd_miro_read(chip, reg) & ~(mask)) | ((value) & (mask)))
      |   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/miro.c:1010:3: note: in expansion of macro 'snd_miro_write_mask'
 1010 |   snd_miro_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
      |   ^~~~~~~~~~~~~~~~~~~

These are all harmless here as only the low 8 bit are passed down
anyway. Change the macros to inline functions to make the code
more readable and also avoid the warning.

Strictly speaking those functions also need locking to make the
read/write pair atomic, but it seems unlikely that anyone would
still run into that issue.

Fixes: 1841f613 ("[ALSA] Add snd-miro driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200429190216.85919-1-arnd@arndb.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b74aa02d upstream.

Currently, system fails to boot because the legacy interrupt remapping
mode does not enable 128-bit IRTE (GA), which is required for x2APIC
support.

Fix by using AMD_IOMMU_GUEST_IR_LEGACY_GA mode when booting with
kernel option amd_iommu_intr=legacy instead. The initialization
logic will check GASup and automatically fallback to using
AMD_IOMMU_GUEST_IR_LEGACY if GA mode is not supported.

Fixes: 3928aa3f ("iommu/amd: Detect and enable guest vAPIC support")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/1587562202-14183-1-git-send-email-suravee.suthikulpanit@amd.comSigned-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1d2ff149 upstream.

SBC4 specifies that WRITE SAME requests with the UNMAP bit set to zero
"shall perform the specified write operation to each LBA specified by the
command".  Commit 2237498f ("target/iblock: Convert WRITE_SAME to
blkdev_issue_zeroout") modified the iblock backend to call
blkdev_issue_zeroout() when handling WRITE SAME requests with UNMAP=0 and a
zero data segment.

The iblock blkdev_issue_zeroout() call incorrectly provides a flags
parameter of 0 (bool false), instead of BLKDEV_ZERO_NOUNMAP.  The bool
false parameter reflects the blkdev_issue_zeroout() API prior to commit
ee472d83 ("block: add a flags argument to (__)blkdev_issue_zeroout")
which was merged shortly before 2237498f.

Link: https://lore.kernel.org/r/20200419163109.11689-1-ddiss@suse.de
Fixes: 2237498f ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b52649ae upstream.

The function qcom_iommu_device_probe() does not perform sufficient
error checking after executing devm_ioremap_resource(), which can
result in crashes if a critical error path is encountered.

Fixes: 0ae349a0 ("iommu/qcom: Add qcom_iommu")
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200418134703.1760-1-tangbin@cmss.chinamobile.comSigned-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5cbf3264 upstream.

Use follow_pfn() to get the PFN of a PFNMAP VMA instead of assuming that
vma->vm_pgoff holds the base PFN of the VMA.  This fixes a bug where
attempting to do VFIO_IOMMU_MAP_DMA on an arbitrary PFNMAP'd region of
memory calculates garbage for the PFN.

Hilariously, this only got detected because the first "PFN" calculated
by vaddr_get_pfn() is PFN 0 (vma->vm_pgoff==0), and iommu_iova_to_phys()
uses PA==0 as an error, which triggers a WARN in vfio_unmap_unpin()
because the translation "failed".  PFN 0 is now unconditionally reserved
on x86 in order to mitigate L1TF, which causes is_invalid_reserved_pfn()
to return true and in turns results in vaddr_get_pfn() returning success
for PFN 0.  Eventually the bogus calculation runs into PFNs that aren't
reserved and leads to failure in vfio_pin_map_dma().  The subsequent
call to vfio_remove_dma() attempts to unmap PFN 0 and WARNs.

  WARNING: CPU: 8 PID: 5130 at drivers/vfio/vfio_iommu_type1.c:750 vfio_unmap_unpin+0x2e1/0x310 [vfio_iommu_type1]
  Modules linked in: vfio_pci vfio_virqfd vfio_iommu_type1 vfio ...
  CPU: 8 PID: 5130 Comm: sgx Tainted: G        W         5.6.0-rc5-705d787c7fee-vfio+ #3
  Hardware name: Intel Corporation Mehlow UP Server Platform/Moss Beach Server, BIOS CNLSE2R1.D00.X119.B49.1803010910 03/01/2018
  RIP: 0010:vfio_unmap_unpin+0x2e1/0x310 [vfio_iommu_type1]
  Code: <0f> 0b 49 81 c5 00 10 00 00 e9 c5 fe ff ff bb 00 10 00 00 e9 3d fe
  RSP: 0018:ffffbeb5039ebda8 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff9a55cbf8d480 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff9a52b771c200
  RBP: 0000000000000000 R08: 0000000000000040 R09: 00000000fffffff2
  R10: 0000000000000001 R11: ffff9a51fa896000 R12: 0000000184010000
  R13: 0000000184000000 R14: 0000000000010000 R15: ffff9a55cb66ea08
  FS:  00007f15d3830b40(0000) GS:ffff9a55d5600000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000561cf39429e0 CR3: 000000084f75f005 CR4: 00000000003626e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   vfio_remove_dma+0x17/0x70 [vfio_iommu_type1]
   vfio_iommu_type1_ioctl+0x9e3/0xa7b [vfio_iommu_type1]
   ksys_ioctl+0x92/0xb0
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x4c/0x180
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f15d04c75d7
  Code: <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48

Fixes: 73fa0d10 ("vfio: Type1 IOMMU implementation")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0ea971f8 upstream.

add parentheses to avoid possible vaddr overflow.

Fixes: a54eb550 ("vfio iommu type1: Add support for mediated devices")
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f0abc761 upstream.

The call to ->lookup_put() was too early and it caused an unlock of the
read/write protection of the uobject after the FD was put. This allows a
race:

     CPU1                                 CPU2
 rdma_lookup_put_uobject()
   lookup_put_fd_uobject()
     fput()
				   fput()
				     uverbs_uobject_fd_release()
				       WARN_ON(uverbs_try_lock_object(uobj,
					       UVERBS_LOOKUP_WRITE));
   atomic_dec(usecnt)

Fix the code by changing the order, first unlock and call to
->lookup_put() after that.

Fixes: 38321256 ("IB/core: Add support for idr types")
Link: https://lore.kernel.org/r/20200423060122.6182-1-leon@kernel.orgSuggested-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0fb00941 upstream.

FDs can only be used on the ufile that created them, they cannot be mixed
to other ufiles. We are lacking a check to prevent it.

  BUG: KASAN: null-ptr-deref in atomic64_sub_and_test include/asm-generic/atomic-instrumented.h:1547 [inline]
  BUG: KASAN: null-ptr-deref in atomic_long_sub_and_test include/asm-generic/atomic-long.h:460 [inline]
  BUG: KASAN: null-ptr-deref in fput_many+0x1a/0x140 fs/file_table.c:336
  Write of size 8 at addr 0000000000000038 by task syz-executor179/284

  CPU: 0 PID: 284 Comm: syz-executor179 Not tainted 5.5.0-rc5+ #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
  Call Trace:
   __dump_stack lib/dump_stack.c:77 [inline]
   dump_stack+0x94/0xce lib/dump_stack.c:118
   __kasan_report+0x18f/0x1b7 mm/kasan/report.c:510
   kasan_report+0xe/0x20 mm/kasan/common.c:639
   check_memory_region_inline mm/kasan/generic.c:185 [inline]
   check_memory_region+0x15d/0x1b0 mm/kasan/generic.c:192
   atomic64_sub_and_test include/asm-generic/atomic-instrumented.h:1547 [inline]
   atomic_long_sub_and_test include/asm-generic/atomic-long.h:460 [inline]
   fput_many+0x1a/0x140 fs/file_table.c:336
   rdma_lookup_put_uobject+0x85/0x130 drivers/infiniband/core/rdma_core.c:692
   uobj_put_read include/rdma/uverbs_std_types.h:96 [inline]
   _ib_uverbs_lookup_comp_file drivers/infiniband/core/uverbs_cmd.c:198 [inline]
   create_cq+0x375/0xba0 drivers/infiniband/core/uverbs_cmd.c:1006
   ib_uverbs_create_cq+0x114/0x140 drivers/infiniband/core/uverbs_cmd.c:1089
   ib_uverbs_write+0xaa5/0xdf0 drivers/infiniband/core/uverbs_main.c:769
   __vfs_write+0x7c/0x100 fs/read_write.c:494
   vfs_write+0x168/0x4a0 fs/read_write.c:558
   ksys_write+0xc8/0x200 fs/read_write.c:611
   do_syscall_64+0x9c/0x390 arch/x86/entry/common.c:294
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x44ef99
  Code: 00 b8 00 01 00 00 eb e1 e8 74 1c 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c4 ff ff ff f7 d8 64 89 01 48
  RSP: 002b:00007ffc0b74c028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
  RAX: ffffffffffffffda RBX: 00007ffc0b74c030 RCX: 000000000044ef99
  RDX: 0000000000000040 RSI: 0000000020000040 RDI: 0000000000000005
  RBP: 00007ffc0b74c038 R08: 0000000000401830 R09: 0000000000401830
  R10: 00007ffc0b74c038 R11: 0000000000000246 R12: 0000000000000000
  R13: 0000000000000000 R14: 00000000006be018 R15: 0000000000000000

Fixes: cf8966b3 ("IB/core: Add support for fd objects")
Link: https://lore.kernel.org/r/20200421082929.311931-2-leon@kernel.orgSuggested-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c08cfb2d upstream.

Initialize ib_spec on the stack before using it, otherwise we will have
garbage values that will break creating default rules with invalid parsing
error.

Fixes: a37a1a42 ("IB/mlx4: Add mechanism to support flow steering over IB links")
Link: https://lore.kernel.org/r/20200413132235.930642-1-leon@kernel.orgSigned-off-by: Alaa Hleihel <alaa@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2d7e3ff7 upstream.

GRH fields such as sgid_index, hop limit, et. are set in the QP context
when QP is created/modified.

Currently, when query QP is performed, we fill the GRH fields only if the
GRH bit is set in the QP context, but this bit is not set for RoCE. Adjust
the check so we will set all relevant data for the RoCE too.

Since this data is returned to userspace, the below is an ABI regression.

Fixes: d8966fcd ("IB/core: Use rdma_ah_attr accessor functions")
Link: https://lore.kernel.org/r/20200413132028.930109-1-leon@kernel.orgSigned-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5a263892 upstream.

qlt_free_session_done() tries to post async PRLO / LOGO, and waits for the
completion of these async commands. If UNLOADING is set, this is doomed to
timeout, because the async logout command will never complete.

The only way to avoid waiting pointlessly is to fail posting these commands
in the first place if the driver is in UNLOADING state.  In general,
posting any command should be avoided when the driver is UNLOADING.

With this patch, "rmmod qla2xxx" completes without noticeable delay.

Link: https://lore.kernel.org/r/20200421204621.19228-3-mwilck@suse.com
Fixes: 45235022 ("scsi: qla2xxx: Fix driver unload by shutting down chip")
Acked-by: Arun Easi <aeasi@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 856e152a upstream.

The purpose of the UNLOADING flag is to avoid port login procedures to
continue when a controller is in the process of shutting down.  It makes
sense to set this flag before starting session teardown.

Furthermore, use atomic test_and_set_bit() to avoid the shutdown being run
multiple times in parallel. In qla2x00_disable_board_on_pci_error(), the
test for UNLOADING is postponed until after the check for an already
disabled PCI board.

Link: https://lore.kernel.org/r/20200421204621.19228-2-mwilck@suse.com
Fixes: 45235022 ("scsi: qla2xxx: Fix driver unload by shutting down chip")
Reviewed-by: Arun Easi <aeasi@marvell.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5686dee3 upstream.

When adding devices that don't have a scsi_dh on a BIO based multipath,
I was able to consistently hit the warning below and lock-up the system.

The problem is that __map_bio reads the flag before it potentially being
modified by choose_pgpath, and ends up using the older value.

The WARN_ON below is not trivially linked to the issue. It goes like
this: The activate_path delayed_work is not initialized for non-scsi_dh
devices, but we always set MPATHF_QUEUE_IO, asking for initialization.
That is fine, since MPATHF_QUEUE_IO would be cleared in choose_pgpath.
Nevertheless, only for BIO-based mpath, we cache the flag before calling
choose_pgpath, and use the older version when deciding if we should
initialize the path.  Therefore, we end up trying to initialize the
paths, and calling the non-initialized activate_path work.

[   82.437100] ------------[ cut here ]------------
[   82.437659] WARNING: CPU: 3 PID: 602 at kernel/workqueue.c:1624
  __queue_delayed_work+0x71/0x90
[   82.438436] Modules linked in:
[   82.438911] CPU: 3 PID: 602 Comm: systemd-udevd Not tainted 5.6.0-rc6+ #339
[   82.439680] RIP: 0010:__queue_delayed_work+0x71/0x90
[   82.440287] Code: c1 48 89 4a 50 81 ff 00 02 00 00 75 2a 4c 89 cf e9
94 d6 07 00 e9 7f e9 ff ff 0f 0b eb c7 0f 0b 48 81 7a 58 40 74 a8 94 74
a7 <0f> 0b 48 83 7a 48 00 74 a5 0f 0b eb a1 89 fe 4c 89 cf e9 c8 c4 07
[   82.441719] RSP: 0018:ffffb738803977c0 EFLAGS: 00010007
[   82.442121] RAX: ffffa086389f9740 RBX: 0000000000000002 RCX: 0000000000000000
[   82.442718] RDX: ffffa086350dd930 RSI: ffffa0863d76f600 RDI: 0000000000000200
[   82.443484] RBP: 0000000000000200 R08: 0000000000000000 R09: ffffa086350dd970
[   82.444128] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa086350dd930
[   82.444773] R13: ffffa0863d76f600 R14: 0000000000000000 R15: ffffa08636738008
[   82.445427] FS:  00007f6abfe9dd40(0000) GS:ffffa0863dd80000(0000) knlGS:00000
[   82.446040] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   82.446478] CR2: 0000557d288db4e8 CR3: 0000000078b36000 CR4: 00000000000006e0
[   82.447104] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   82.447561] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   82.448012] Call Trace:
[   82.448164]  queue_delayed_work_on+0x6d/0x80
[   82.448472]  __pg_init_all_paths+0x7b/0xf0
[   82.448714]  pg_init_all_paths+0x26/0x40
[   82.448980]  __multipath_map_bio.isra.0+0x84/0x210
[   82.449267]  __map_bio+0x3c/0x1f0
[   82.449468]  __split_and_process_non_flush+0x14a/0x1b0
[   82.449775]  __split_and_process_bio+0xde/0x340
[   82.450045]  ? dm_get_live_table+0x5/0xb0
[   82.450278]  dm_process_bio+0x98/0x290
[   82.450518]  dm_make_request+0x54/0x120
[   82.450778]  generic_make_request+0xd2/0x3e0
[   82.451038]  ? submit_bio+0x3c/0x150
[   82.451278]  submit_bio+0x3c/0x150
[   82.451492]  mpage_readpages+0x129/0x160
[   82.451756]  ? bdev_evict_inode+0x1d0/0x1d0
[   82.452033]  read_pages+0x72/0x170
[   82.452260]  __do_page_cache_readahead+0x1ba/0x1d0
[   82.452624]  force_page_cache_readahead+0x96/0x110
[   82.452903]  generic_file_read_iter+0x84f/0xae0
[   82.453192]  ? __seccomp_filter+0x7c/0x670
[   82.453547]  new_sync_read+0x10e/0x190
[   82.453883]  vfs_read+0x9d/0x150
[   82.454172]  ksys_read+0x65/0xe0
[   82.454466]  do_syscall_64+0x4e/0x210
[   82.454828]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[...]
[   82.462501] ---[ end trace bb39975e9cf45daa ]---

Cc: stable@vger.kernel.org
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 31b22120 upstream.

The dm-writecache reads metadata in the target constructor. However, when
we reload the target, there could be another active instance running on
the same device. This is the sequence of operations when doing a reload:

1. construct new target
2. suspend old target
3. resume new target
4. destroy old target

Metadata that were written by the old target between steps 1 and 2 would
not be visible by the new target.

Fix the data corruption by loading the metadata in the resume handler.

Also, validate block_size is at least as large as both the devices'
logical block size and only read 1 block from the metadata during
target constructor -- no need to read entirety of metadata now that it
is done during resume.

Fixes: 48debafe ("dm: add writecache target")
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ad4e80a6 upstream.

The error correction data is computed as if data and hash blocks
were concatenated. But hash block number starts from v->hash_start.
So, we have to calculate hash block number based on that.

Fixes: a739ff3f ("dm verity: add support for forward error correction")
Cc: stable@vger.kernel.org
Signed-off-by: Sunwook Eom <speed.eom@samsung.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2351f8d2 upstream.

Currently the kernel threads are not frozen in software_resume(), so
between dpm_suspend_start(PMSG_QUIESCE) and resume_target_kernel(),
system_freezable_power_efficient_wq can still try to submit SCSI
commands and this can cause a panic since the low level SCSI driver
(e.g. hv_storvsc) has quiesced the SCSI adapter and can not accept
any SCSI commands: https://lkml.org/lkml/2020/4/10/47

At first I posted a fix (https://lkml.org/lkml/2020/4/21/1318) trying
to resolve the issue from hv_storvsc, but with the help of
Bart Van Assche, I realized it's better to fix software_resume(),
since this looks like a generic issue, not only pertaining to SCSI.

Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a9b760b0 upstream.

Transitioned power state logged at the end of setting ACPI power.

However, D3cold won't be in the message because state can only be
D3hot at most.

Use target_state to corretly report when power state is D3cold.

Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4285de07 upstream.

The checks of the plugin buffer overflow in the previous fix by commit
  f2ecf903 ("ALSA: pcm: oss: Avoid plugin buffer overflow")
are put in the wrong places mistakenly, which leads to the expected
(repeated) sound when the rate plugin is involved.  Fix in the right
places.

Also, at those right places, the zero check is needed for the
termination node, so added there as well, and let's get it done,
finally.

Fixes: f2ecf903 ("ALSA: pcm: oss: Avoid plugin buffer overflow")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200424193350.19678-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a2f64724 upstream.

Fix the following coccicheck warning:
sound/pci/hda/patch_hdmi.c:1852:2-8: preceding lock on line 1846

After add sanity check to pass klockwork check,
The spdif_mutex should be unlock before return true
in check_non_pcm_per_cvt().

Fixes: 960a581e ("ALSA: hda: fix some klockwork scan warnings")
Signed-off-by: Wu Bo <wubo40@huawei.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1587907042-694161-1-git-send-email-wubo40@huawei.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 547d2c9c upstream.

The USB vendor ID of NuPrime DAC-10 is not 16b0 but 16d0.

Fixes: f656891c ("ALSA: usb-audio: add more quirks for DSD interfaces")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200430124755.15940-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ef0b3203 upstream.

This new Lenovo ThinkCenter has two front mics which can't be handled
by PA so far, so apply the fixup ALC283_FIXUP_HEADSET_MIC to change
the location for one of the mics.

Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200427030039.10121-1-hui.wang@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f6033c5e upstream.

btrfs_remove_block_group() invokes btrfs_lookup_block_group(), which
returns a local reference of the block group that contains the given
bytenr to "block_group" with increased refcount.

When btrfs_remove_block_group() returns, "block_group" becomes invalid,
so the refcount should be decreased to keep refcount balanced.

The reference counting issue happens in several exception handling paths
of btrfs_remove_block_group(). When those error scenarios occur such as
btrfs_alloc_path() returns NULL, the function forgets to decrease its
refcnt increased by btrfs_lookup_block_group() and will cause a refcnt
leak.

Fix this issue by jumping to "out_put_group" label and calling
btrfs_put_block_group() when those error scenarios occur.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 933db733 upstream.

qxl_release should not be accesses after qxl_push_*_ring_release() calls:
userspace driver can process submitted command quickly, move qxl_release
into release_ring, generate interrupt and trigger garbage collector.

It can lead to crashes in qxl driver or trigger memory corruption
in some kmalloc-192 slab object

Gerd Hoffmann proposes to swap the qxl_release_fence_buffer_objects() +
qxl_push_{cursor,command}_ring_release() calls to close that race window.

cc: stable@vger.kernel.org
Fixes: f64122c1 ("drm: add new QXL driver. (v1.4)")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Link: http://patchwork.freedesktop.org/patch/msgid/fa17b338-66ae-f299-68fe-8d32419d9071@virtuozzo.comSigned-off-by: Gerd Hoffmann <kraxel@redhat.com>
[backported to v.4.19 stable]
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a65aa9c3 upstream.

Cc: stable@vger.kernel.org
Fixes: 8002db63 ("qxl: convert qxl driver to proper use for reservations")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Link: http://patchwork.freedesktop.org/patch/msgid/2e5a13ae-9ab2-5401-aa4d-03d5f5593423@virtuozzo.comSigned-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 85e9b88a upstream.

ret should be changed to release allocated struct qxl_release

Cc: stable@vger.kernel.org
Fixes: 8002db63 ("qxl: convert qxl driver to proper use for reservations")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Link: http://patchwork.freedesktop.org/patch/msgid/22cfd55f-07c8-95d0-a2f7-191b7153c3d4@virtuozzo.comSigned-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6292b8ef upstream.

The DispID DTD pixel clock is documented as:
"00 00 00 h → FF FF FF h | Pixel clock ÷ 10,000 0.01 → 167,772.16 Mega Pixels per Sec"
Which seems to imply that we to add one to the raw value.

Reality seems to agree as there are tiled displays in the wild
which currently show a 10kHz difference in the pixel clock
between the tiles (one tile gets its mode from the base EDID,
the other from the DispID block).

Cc: stable@vger.kernel.org
References: https://gitlab.freedesktop.org/drm/intel/-/issues/27Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200423151743.18767-1-ville.syrjala@linux.intel.comReviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b0d3869c upstream.

... to protect the modification of mp->m_count done by it.  Most of
the places that modify that thing also have namespace_lock held,
but not all of them can do so, so we really need mount_lock here.
Kudos to Piotr Krysiuk <piotras@gmail.com>, who'd spotted a related
bug in pivot_root(2) (fixed unnoticed in 5.3); search for other
similar turds has caught out this one.

Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f1eec3b0 upstream.

While calculating overhead for internal journal, also check
that j_inum shouldn't be 0. Otherwise we get below error with
xfstests generic/050 with external journal (XXX_LOGDEV config) enabled.

It could be simply reproduced with loop device with an external journal
and marking blockdev as RO before mounting.

[ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode #
------------[ cut here ]------------
generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2)
WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0
CPU: 107 PID: 115347 Comm: mount Tainted: G             L   --------- -t - 4.18.0-167.el8.ppc64le #1
NIP:  c0000000006f6d44 LR: c0000000006f6d40 CTR: 0000000030041dd4
<...>
NIP [c0000000006f6d44] generic_make_request_checks+0x6b4/0x7d0
LR [c0000000006f6d40] generic_make_request_checks+0x6b0/0x7d0
<...>
Call Trace:
generic_make_request_checks+0x6b0/0x7d0 (unreliable)
generic_make_request+0x3c/0x420
submit_bio+0xd8/0x200
submit_bh_wbc+0x1e8/0x250
__sync_dirty_buffer+0xd0/0x210
ext4_commit_super+0x310/0x420 [ext4]
__ext4_error+0xa4/0x1e0 [ext4]
__ext4_iget+0x388/0xe10 [ext4]
ext4_get_journal_inode+0x40/0x150 [ext4]
ext4_calculate_overhead+0x5a8/0x610 [ext4]
ext4_fill_super+0x3188/0x3260 [ext4]
mount_bdev+0x778/0x8f0
ext4_mount+0x28/0x50 [ext4]
mount_fs+0x74/0x230
vfs_kern_mount.part.6+0x6c/0x250
do_mount+0x2fc/0x1280
sys_mount+0x158/0x180
system_call+0x5c/0x70
EXT4-fs (pmem1p2): no journal found
EXT4-fs (pmem1p2): can't get journal size
EXT4-fs (pmem1p2): mounted filesystem without journal. Opts: dax,norecovery

Fixes: 3c816ded ("ext4: use journal inode to determine journal overhead")
Reported-by: Harish Sriram <harish@linux.ibm.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200316093038.25485-1-riteshh@linux.ibm.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8063f761 upstream.

The qed_chain data structure was modified in
commit 1a4a6975 ("qed: Chain support for external PBL") to support
receiving an external pbl (due to iWARP FW requirements).
The pages pointed to by the pbl are allocated in qed_chain_alloc
and their virtual address are stored in an virtual addresses array to
enable accessing and freeing the data. The physical addresses however
weren't stored and were accessed directly from the external-pbl
during free.

Destroy-qp flow, leads to freeing the external pbl before the chain is
freed, when the chain is freed it tries accessing the already freed
external pbl, leading to a use-after-free. Therefore we need to store
the physical addresses in additional to the virtual addresses in a
new data structure.

Fixes: 1a4a6975 ("qed: Chain support for external PBL")
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Yuval Bason <ybason@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 50fe7ebb upstream.

The current JIT clobbers the destination register for BPF_JSET BPF_X
and BPF_K by using "and" and "or" instructions. This is fine when the
destination register is a temporary loaded from a register stored on
the stack but not otherwise.

This patch fixes the problem (for both BPF_K and BPF_X) by always loading
the destination register into temporaries since BPF_JSET should not
modify the destination register.

This bug may not be currently triggerable as BPF_REG_AX is the only
register not stored on the stack and the verifier uses it in a limited
way.

Fixes: 03f5781b ("bpf, x86_32: add eBPF JIT compiler for ia32")
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Wang YanQing <udknight@gmail.com>
Link: https://lore.kernel.org/bpf/20200422173630.8351-2-luke.r.nels@gmail.comSigned-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c843b382 ]

The jc42 driver passes I2C client's name as hwmon device name. In case
of device tree probed devices this ends up being part of the compatible
string, "jc-42.4-temp". This name contains hyphens and the hwmon core
doesn't like this:

jc42 2-0018: hwmon: 'jc-42.4-temp' is not a valid name attribute, please fix

This changes the name to "jc42" which doesn't have any illegal
characters.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20200417092853.31206-1-s.hauer@pengutronix.deSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 907ea529 ]

If the in-core buddy bitmap gets corrupted (or out of sync with the
block bitmap), issue a WARN_ON and try to recover.  In most cases this
involves skipping trying to allocate out of a particular block group.
We can end up declaring the file system corrupted, which is fair,
since the file system probably should be checked before we proceed any
further.

Link: https://lore.kernel.org/r/20200414035649.293164-1-tytso@mit.edu
Google-Bug-Id: 34811296
Google-Bug-Id: 34639169
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a17a9d93 ]

Current wait times have proven to be too short to protect against inode
reuses that lead to metadata inconsistencies.

Now that we will retry the inode allocation if we can't find any
recently deleted inodes, it's a lot safer to increase the recently
deleted time from 5 seconds to a minute.

Link: https://lore.kernel.org/r/20200414023925.273867-1-tytso@mit.edu
Google-Bug-Id: 36602237
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>