When last descriptor in a descriptor list completed with XferComplete
interrupt, core switching to handle next descriptor and assert BNA
interrupt. Both these interrupts are set while dwc2_hsotg_epint()
handler called. Each interrupt should be handled separately: first
XferComplete interrupt then BNA interrupt, otherwise last completed
transfer will not be giveback to function driver as completed
request.

Fixes: 729cac69 ("usb: dwc2: Change ISOC DDMA flow")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/a36981accc26cd674c5d8f8da6164344b94ec1fe.1631386531.git.Minas.Harutyunyan@synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

No functional change. Since configuration to stop HCD is invoked from
multiple places, group all of them in usb_stop_hcd().
Tested-by: Chris Chiu <chris.chiu@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210909064200.16216-4-kishon@ti.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Set "HCD_FLAG_DEFER_RH_REGISTER" to hcd->flags in xhci_run() to defer
registering primary roothub in usb_add_hcd(). This will make sure both
primary roothub and secondary roothub will be registered along with the
second HCD. This is required for cold plugged USB devices to be detected
in certain PCIe USB cards (like Inateck USB card connected to AM64 EVM
or J7200 EVM).

CC: stable@vger.kernel.org # 5.4+
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210909064200.16216-3-kishon@ti.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It has been observed with certain PCIe USB cards (like Inateck connected
to AM64 EVM or J7200 EVM) that as soon as the primary roothub is
registered, port status change is handled even before xHC is running
leading to cold plug USB devices not detected. For such cases, registering
both the root hubs along with the second HCD is required. Add support for
deferring roothub registration in usb_add_hcd(), so that both primary and
secondary roothubs are registered along with the second HCD.

CC: stable@vger.kernel.org # 5.4+
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Chris Chiu <chris.chiu@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210909064200.16216-2-kishon@ti.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

According USB spec each ISOC transaction should be performed in a
designated for that transaction interval. On bus errors or delays
in operating system scheduling of client software can result in no
packet being transferred for a (micro)frame. An error indication
should be returned as status to the client software in such a case.

Current implementation in case of missed/dropped interval send same
data in next possible interval instead of reporting missed isoc.

This fix complete requests with -ENODATA if interval elapsed.

HSOTG core in BDMA and Slave modes haven't HW support for
(micro)frames tracking, this is why SW should care about tracking
of (micro)frames. Because of that method and consider operating
system scheduling delays, added few additional checking's of elapsed
target (micro)frame:
1. Immediately before enabling EP to start transfer.
2. With any transfer completion interrupt.
3. With incomplete isoc in/out interrupt.
4. With EP disabled interrupt because of incomplete transfer.
5. With OUT token received while EP disabled interrupt (for OUT
transfers).
6. With NAK replied to IN token interrupt (for IN transfers).

As part of ISOC flow, additionally fixed 'current' and 'target' frame
calculation functions. In HS mode SOF limits provided by DSTS register
is 0x3fff, but in non HS mode this limit is 0x7ff.

Tested by internal tool which also using for dwc3 testing.
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/95d1423adf4b0f68187c9894820c4b7e964a3f7f.1631175721.git.Minas.Harutyunyan@synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

After we start to do core soft reset while usb role switch,
the phy init is invoked at every switch to device mode, but
its counter part de-init is missing, this causes the actual
phy init can not be done when we really want to re-init phy
like system resume, because the counter maintained by phy
core is not 0. considering phy init is actually redundant for
role switch, so move out the phy init from core soft reset to
dwc3 core init where is the only place required.

Fixes: f88359e1 ("usb: dwc3: core: Do core softreset when switch mode")
Cc: <stable@vger.kernel.org>
Tested-by: faqiang.zhu <faqiang.zhu@nxp.com>
Tested-by: John Stultz <john.stultz@linaro.org> #HiKey960
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1631068099-13559-1-git-send-email-jun.li@nxp.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit f3de5d85.

That commit broke USB on all routers that have USB always powered on and
don't require toggling any GPIO. It's a majority of devices actually.

The original code worked and seemed safe: vcc GPIO is optional and
bcma_hci_platform_power_gpio() takes care of checking the pointer before
using it.

This revert fixes:
[   10.801127] bcma_hcd: probe of bcma0:11 failed with error -2

Fixes: f3de5d85 ("USB: bcma: Add a check for devm_gpiod_get")
Cc: stable <stable@vger.kernel.org>
Cc: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20210831065419.18371-1-zajec5@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use platform_register_drivers() and platform_unregister_drivers() to
register and unregister ehci platform drivers. This simplifies the code
and prevents the following build errors seen with sparc:allmodconfig.

drivers/usb/host/ehci-hcd.c:1301: error:
	"PLATFORM_DRIVER" redefined
drivers/usb/host/ehci-sh.c:173:31: error:
	'ehci_hcd_sh_driver' defined but not used
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210907123002.3951446-1-linux@roeck-us.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If the driver runs out of minor numbers it would release minor 0 and
allow another device to claim the minor while still in use.

Fortunately, registering the tty class device of the second device would
fail (with a stack dump) due to the sysfs name collision so no memory is
leaked.

Fixes: cae2bc76 ("usb: cdc-acm: Decrement tty port's refcount if probe() fail")
Cc: stable@vger.kernel.org      # 4.19
Cc: Jaejoong Kim <climbbb.kim@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210907082318.7757-1-johan@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210831084236.1359677-1-yangyingliang@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For DEV_VER_V3 version there exist race condition between clearing
ep_sts.EP_STS_TRBERR and setting ep_cmd.EP_CMD_DRDY bit.
Setting EP_CMD_DRDY will be ignored by controller when
EP_STS_TRBERR is set. So, between these two instructions we have
a small time gap in which the EP_STSS_TRBERR can be set. In such case
the transfer will not start after setting doorbell.

Fixes: 7733f6c3 ("usb: cdns3: Add Cadence USB3 DRD Driver")
cc: <stable@vger.kernel.org> # 5.12.x
Tested-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20210907062619.34622-1-pawell@gli-login.cadence.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This loop is supposed to loop until if reads something other than
CS_IDST or until it times out after 30,000 attempts.  But because of
the || vs && bug, it will never time out and instead it will loop a
minimum of 30,000 times.

This bug is quite old but the code is only used in USB_DEVICE_TEST_MODE
so it probably doesn't affect regular usage.

Fixes: 96fe53ef ("usb: gadget: r8a66597-udc: add support for TEST_MODE")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210906094221.GA10957@kiliSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The patch increases the bitshift in feedback frequency
calculation with EP-OUT bInterval value.

Tests have revealed that Win10 and OSX UAC2 drivers require
the feedback frequency to be based on the actual packet
interval instead of on the USB2 microframe. Otherwise they
ignore the feedback value. Linux snd-usb-audio driver
detects the applied bitshift automatically.
Tested-by: Henrik Enquist <henrik.enquist@gmail.com>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210906130822.12256-1-pavel.hofman@ivitera.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

testusb' application which uses 'usbtest' driver reports 'unknown speed'
from the function 'find_testdev'. The variable 'entry->speed' was not
updated from  the application. The IOCTL mentioned in the FIXME comment can
only report whether the connection is low speed or not. Speed is read using
the IOCTL USBDEVFS_GET_SPEED which reports the proper speed grade.  The
call is implemented in the function 'handle_testdev' where the file
descriptor was availble locally. Sample output is given below where 'high
speed' is printed as the connected speed.

sudo ./testusb -a
high speed      /dev/bus/usb/001/011    0
/dev/bus/usb/001/011 test 0,    0.000015 secs
/dev/bus/usb/001/011 test 1,    0.194208 secs
/dev/bus/usb/001/011 test 2,    0.077289 secs
/dev/bus/usb/001/011 test 3,    0.170604 secs
/dev/bus/usb/001/011 test 4,    0.108335 secs
/dev/bus/usb/001/011 test 5,    2.788076 secs
/dev/bus/usb/001/011 test 6,    2.594610 secs
/dev/bus/usb/001/011 test 7,    2.905459 secs
/dev/bus/usb/001/011 test 8,    2.795193 secs
/dev/bus/usb/001/011 test 9,    8.372651 secs
/dev/bus/usb/001/011 test 10,    6.919731 secs
/dev/bus/usb/001/011 test 11,   16.372687 secs
/dev/bus/usb/001/011 test 12,   16.375233 secs
/dev/bus/usb/001/011 test 13,    2.977457 secs
/dev/bus/usb/001/011 test 14 --> 22 (Invalid argument)
/dev/bus/usb/001/011 test 17,    0.148826 secs
/dev/bus/usb/001/011 test 18,    0.068718 secs
/dev/bus/usb/001/011 test 19,    0.125992 secs
/dev/bus/usb/001/011 test 20,    0.127477 secs
/dev/bus/usb/001/011 test 21 --> 22 (Invalid argument)
/dev/bus/usb/001/011 test 24,    4.133763 secs
/dev/bus/usb/001/011 test 27,    2.140066 secs
/dev/bus/usb/001/011 test 28,    2.120713 secs
/dev/bus/usb/001/011 test 29,    0.507762 secs
Signed-off-by: Faizel K B <faizel.kb@dicortech.com>
Link: https://lore.kernel.org/r/20210902114444.15106-1-faizel.kb@dicortech.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:

 - Add missing fields and remove some duplicate fields when printing a
   perf_event_attr.

 - Fix hybrid config terms list corruption.

 - Update kernel header copies, some resulted in new kernel features
   being automagically added to 'perf trace' syscall/tracepoint argument
   id->string translators.

 - Add a file generated during the documentation build to .gitignore.

 - Add an option to build without libbfd, as some distros, like Debian
   consider its ABI unstable.

 - Add support to print a textual representation of IBS raw sample data
   in 'perf report'.

 - Fix bpf 'perf test' sample mismatch reporting

 - Fix passing arguments to stackcollapse report in a 'perf script'
   python script.

 - Allow build-id with trailing zeros.

 - Look for ImageBase in PE file to compute .text offset.

* tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits)
  tools headers UAPI: Update tools's copy of drm.h headers
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Sync linux/fs.h with the kernel sources
  tools headers UAPI: Sync linux/in.h copy with the kernel sources
  perf tools: Add an option to build without libbfd
  perf tools: Allow build-id with trailing zeros
  perf tools: Fix hybrid config terms list corruption
  perf tools: Factor out copy_config_terms() and free_config_terms()
  perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields
  perf tools: Ignore Documentation dependency file
  perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions
  tools include UAPI: Update linux/mount.h copy
  perf beauty: Cover more flags in the  move_mount syscall argument beautifier
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  tools include UAPI: Sync sound/asound.h copy with the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
  perf report: Add support to print a textual representation of IBS raw sample data
  perf report: Add tools/arch/x86/include/asm/amd-ibs.h
  perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings
  ...

Pull compiler attributes updates from Miguel Ojeda:

 - Fix __has_attribute(__no_sanitize_coverage__) for GCC 4 (Marco Elver)

 - Add Nick as Reviewer for compiler_attributes.h (Nick Desaulniers)

 - Move __compiletime_{error|warning} (Nick Desaulniers)

* tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux:
  compiler_attributes.h: move __compiletime_{error|warning}
  MAINTAINERS: add Nick as Reviewer for compiler_attributes.h
  Compiler Attributes: fix __has_attribute(__no_sanitize_coverage__) for GCC 4

Pull auxdisplay updates from Miguel Ojeda:
 "An assortment of improvements for auxdisplay:

   - Replace symbolic permissions with octal permissions (Jinchao Wang)

   - ks0108: Switch to use module_parport_driver() (Andy Shevchenko)

   - charlcd: Drop unneeded initializers and switch to C99 style (Andy
     Shevchenko)

   - hd44780: Fix oops on module unloading (Lars Poeschel)

   - Add I2C gpio expander example (Ralf Schlatterbeck)"

* tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux:
  auxdisplay: Replace symbolic permissions with octal permissions
  auxdisplay: ks0108: Switch to use module_parport_driver()
  auxdisplay: charlcd: Drop unneeded initializers and switch to C99 style
  auxdisplay: hd44780: Fix oops on module unloading
  auxdisplay: Add I2C gpio expander example

Pull CPU hotplug updates from Thomas Gleixner:
 "Updates for the SMP and CPU hotplug:

   - Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the
     original hotplug code and now causing trouble with the ARM64 cache
     topology setup due to the pointless SMP function call.

     It's not longer required as the hotplug callbacks are guaranteed to
     be invoked on the upcoming CPU.

   - Remove the deprecated and now unused CPU hotplug functions

   - Rewrite the CPU hotplug API documentation"

* tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation: core-api/cpuhotplug: Rewrite the API section
  cpu/hotplug: Remove deprecated CPU-hotplug functions.
  thermal: Replace deprecated CPU-hotplug functions.
  drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()

Merge tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull misc driver fix from Greg KH:
 "Here is a single patch for 5.15-rc1, for the lkdtm misc driver.

  It resolves a build issue that many people were hitting with your
  current tree, and Kees and others felt would be good to get merged
  before -rc1 comes out, to prevent them from having to constantly hit
  it as many development trees restart on -rc1, not older -rc releases.

  It has NOT been in linux-next, but has passed 0-day testing and looks
  'obviously correct' when reviewing it locally :)"

* tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  lkdtm: Use init_uts_ns.name instead of macros

Pull IPMI updates from Corey Minyard:
 "A couple of very minor fixes for style and rate limiting.

  Nothing big, but probably needs to go in"

* tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi:
  char: ipmi: use DEVICE_ATTR helper macro
  ipmi: rate limit ipmi smi_event failure message

Pull scheduler fixes from Borislav Petkov:

 - Make sure the idle timer expires in hardirq context, on PREEMPT_RT

 - Make sure the run-queue balance callback is invoked only on the
   outgoing CPU

* tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Prevent balance_push() on remote runqueues
  sched/idle: Make the idle timer expire in hard interrupt context

Pull locking fixes from Borislav Petkov:

 - Fix the futex PI requeue machinery to not return to userspace in
   inconsistent state

 - Avoid a potential null pointer dereference in the ww_mutex deadlock
   check

 - Other smaller cleanups and optimizations

* tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rtmutex: Fix ww_mutex deadlock check
  futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic()
  futex: Avoid redundant task lookup
  futex: Clarify comment for requeue_pi_wake_futex()
  futex: Prevent inconsistent state and exit race
  futex: Return error code instead of assigning it without effect
  locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT

Pull timer fix from Borislav Petkov:

 - Handle negative second values properly when converting a timespec64
   to nanoseconds.

* tag 'timers_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Handle negative seconds correctly in timespec64_to_ns()

Pull namei updates from Al Viro:
 "Clearing fallout from mkdirat in io_uring series. The fix in the
  kern_path_locked() patch plus associated cleanups"

* 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  putname(): IS_ERR_OR_NULL() is wrong here
  namei: Standardize callers of filename_create()
  namei: Standardize callers of filename_lookup()
  rename __filename_parentat() to filename_parentat()
  namei: Fix use after free in kern_path_locked

Pull smbfs updates from Steve French:
 "cifs/smb3 updates:

   - DFS reconnect fix

   - begin creating common headers for server and client

   - rename the cifs_common directory to smbfs_common to be more
     consistent ie change use of the name cifs to smb (smb3 or smbfs is
     more accurate, as the very old cifs dialect has long been
     superseded by smb3 dialects).

  In the future we can rename the fs/cifs directory to fs/smbfs.

  This does not include the set of multichannel fixes nor the two
  deferred close fixes (they are still being reviewed and tested)"

* tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: properly invalidate cached root handle when closing it
  cifs: move SMB FSCTL definitions to common code
  cifs: rename cifs_common to smbfs_common
  cifs: update FSCTL definitions

Pull virtio updates from Michael Tsirkin:

 - vduse driver ("vDPA Device in Userspace") supporting emulated virtio
   block devices

 - virtio-vsock support for end of record with SEQPACKET

 - vdpa: mac and mq support for ifcvf and mlx5

 - vdpa: management netlink for ifcvf

 - virtio-i2c, gpio dt bindings

 - misc fixes and cleanups

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
  Documentation: Add documentation for VDUSE
  vduse: Introduce VDUSE - vDPA Device in Userspace
  vduse: Implement an MMU-based software IOTLB
  vdpa: Support transferring virtual addressing during DMA mapping
  vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
  vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
  vhost-iotlb: Add an opaque pointer for vhost IOTLB
  vhost-vdpa: Handle the failure of vdpa_reset()
  vdpa: Add reset callback in vdpa_config_ops
  vdpa: Fix some coding style issues
  file: Export receive_fd() to modules
  eventfd: Export eventfd_wake_count to modules
  iova: Export alloc_iova_fast() and free_iova_fast()
  virtio-blk: remove unneeded "likely" statements
  virtio-balloon: Use virtio_find_vqs() helper
  vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
  vsock_test: update message bounds test for MSG_EOR
  af_vsock: rename variables in receive loop
  virtio/vsock: support MSG_EOR bit processing
  vhost/vsock: support MSG_EOR bit processing
  ...

Pull more RISC-V updates from Palmer Dabbelt:

 - A pair of defconfig additions, for NVMe and the EFI filesystem
   localization options.

 - A larger address space for stack randomization.

 - A cleanup to our install rules.

 - A DTS update for the Microchip Icicle board, to fix the serial
   console.

 - Support for build-time table sorting, which allows us to have
   __ex_table read-only.

* tag 'riscv-for-linus-5.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Move EXCEPTION_TABLE to RO_DATA segment
  riscv: Enable BUILDTIME_TABLE_SORT
  riscv: dts: microchip: mpfs-icicle: Fix serial console
  riscv: move the (z)install rules to arch/riscv/Makefile
  riscv: Improve stack randomisation on RV64
  riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1
  riscv: defconfig: enable BLK_DEV_NVME

Pull coccinelle updates from Julia Lawall:
 "These changes update some existing semantic patches with
  respect to some recent changes in the kernel.

  Specifically, the change to kvmalloc.cocci searches for
  kfree_sensitive rather than kzfree, and the change to
  use_after_iter.cocci adds list_entry_is_head as a valid
  use of a list iterator index variable after the end of
  the loop"

* 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
  scripts: coccinelle: allow list_entry_is_head() to use pos
  coccinelle: api: rename kzfree to kfree_sensitive

Picking the changes from:

  17ce9c61 ("drm: document DRM_IOCTL_MODE_RMFB")

Doesn't result in any tooling changes:

  $ tools/perf/trace/beauty/drm_ioctl.sh  > before
  $ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
  $ tools/perf/trace/beauty/drm_ioctl.sh  > after
  $ diff -u before after

Silencing these perf build warnings:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
  diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h

Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes in:

  b65a9489 ("drm/i915/userptr: Probe existence of backing struct pages upon creation")
  ee242ca7 ("drm/i915/guc: Implement GuC priority management")
  81340cf3 ("drm/i915/uapi: reject set_domain for discrete")
  7961c5b6 ("drm/i915: Add TTM offset argument to mmap.")
  aef7b67a ("drm/i915/uapi: convert drm_i915_gem_userptr to kernel doc")
  e7737b67 ("drm/i915/uapi: reject caching ioctls for discrete")
  3aa8c57f ("drm/i915/uapi: convert drm_i915_gem_set_domain to kernel doc")
  289f5a72 ("drm/i915/uapi: convert drm_i915_gem_caching to kernel doc")
  4a766ae4 ("drm/i915: Drop the CONTEXT_CLONE API (v2)")
  6ff6d61d ("drm/i915: Drop I915_CONTEXT_PARAM_NO_ZEROMAP")
  fe4751c3 ("drm/i915: Drop I915_CONTEXT_PARAM_RINGSIZE")
  57772953 ("drm/i915: Document the Virtual Engine uAPI")
  c649432e ("drm/i915: Fix busy ioctl commentary")

That doesn't result in any changes to tooling as no new ioctl were
added (at least not perceived by tools/perf/trace/beauty/drm_ioctl.sh).

Addressing this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
  diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the change in:

  7957d93b ("block: add ioctl to read the disk sequence number")

It adds a new ioctl, but we are still not using that to generate tables
for 'perf trace', so no changes in tooling.

This silences this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
  diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes in:

  db243b79 ("net/ipv4/ipv6: Replace one-element arraya with flexible-array members")
  2d3e5caf ("net/ipv4: Replace one-element array with flexible-array member")

That don't result in any change in tooling, the structs changed remains
with the same layout.

This addresses this build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
  diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h

Cc: David S. Miller <davem@davemloft.net>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Some distributions, like debian, don't link perf with libbfd. Add a
build flag to make this configuration buildable and testable.

This was inspired by:

  https://lore.kernel.org/linux-perf-users/20210910102307.2055484-1-tonyg@leastfixedpoint.com/T/#uSigned-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: tony garnock-jones <tonyg@leastfixedpoint.com>
Link: http://lore.kernel.org/lkml/20210910225756.729087-1-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Currently perf saves a build-id with size but old versions assumes the
size of 20.  In case the build-id is less than 20 (like for MD5), it'd
fill the rest with 0s.

I saw a problem when old version of perf record saved a binary in the
build-id cache and new version of perf reads the data.  The symbols
should be read from the build-id cache (as the path no longer has the
same binary) but it failed due to mismatch in the build-id.

  symsrc__init: build id mismatch for /home/namhyung/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf.

The build-id event in the data has 20 byte build-ids, but it saw a
different size (16) when it reads the build-id of the elf file in the
build-id cache.

  $ readelf -n ~/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf

  Displaying notes found in: .note.gnu.build-id
    Owner                Data size 	Description
    GNU                  0x00000010	NT_GNU_BUILD_ID (unique build ID bitstring)
      Build ID: 53e4c2f42a4c61a2d632d92a72afa08f

Let's fix this by allowing trailing zeros if the size is different.

Fixes: 39be8d01 ("perf tools: Pass build_id object to dso__build_id_equal()")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210910224630.1084877-1-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

A config terms list was spliced twice, resulting in a never-ending loop
when the list was traversed. Fix by using list_splice_init() and copying
and freeing the lists as necessary.

This patch also depends on patch "perf tools: Factor out
copy_config_terms() and free_config_terms()"

Example on ADL:

 Before:

  # perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname &
  # jobs
  [1]+  Running                    perf record -e "{intel_pt//,cycles/aux-sample-size=4096/pp}" uname
  # perf top -E 10
    PerfTop:    4071 irqs/sec  kernel: 6.9%  exact: 100.0% lost: 0/0 drop: 0/0 [4000Hz cycles],  (all, 24 CPUs)
  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    97.60%  perf           [.] __evsel__get_config_term
     0.25%  [kernel]       [k] kallsyms_expand_symbol.constprop.13
     0.24%  perf           [.] kallsyms__parse
     0.15%  [kernel]       [k] _raw_spin_lock
     0.14%  [kernel]       [k] number
     0.13%  [kernel]       [k] advance_transaction
     0.08%  [kernel]       [k] format_decode
     0.08%  perf           [.] map__process_kallsym_symbol
     0.08%  perf           [.] rb_insert_color
     0.08%  [kernel]       [k] vsnprintf
  exiting.
  # kill %1

After:

  # perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname &
  Linux
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.060 MB perf.data ]
  # perf script | head
       perf-exec   604 [001]  1827.312293:                            psb:  psb offs: 0                       ffffffffb8415e87 pt_config_start+0x37 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb856a3bd event_sched_in.isra.133+0xfd ([kernel.kallsyms]) => ffffffffb856a9a0 perf_pmu_nop_void+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb856b10e merge_sched_in+0x26e ([kernel.kallsyms]) => ffffffffb856a2c0 event_sched_in.isra.133+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb856a45d event_sched_in.isra.133+0x19d ([kernel.kallsyms]) => ffffffffb8568b80 perf_event_set_state.part.61+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb8568b86 perf_event_set_state.part.61+0x6 ([kernel.kallsyms]) => ffffffffb85662a0 perf_event_update_time+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb856a35c event_sched_in.isra.133+0x9c ([kernel.kallsyms]) => ffffffffb8567610 perf_log_itrace_start+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb856a377 event_sched_in.isra.133+0xb7 ([kernel.kallsyms]) => ffffffffb8403b40 x86_pmu_add+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb8403b86 x86_pmu_add+0x46 ([kernel.kallsyms]) => ffffffffb8403940 collect_events+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb8403a7b collect_events+0x13b ([kernel.kallsyms]) => ffffffffb8402cd0 collect_event+0x0 ([kernel.kallsyms])

Fixes: 30def61f ("perf parse-events Create two hybrid cache events")
Fixes: 94da591b ("perf parse-events Create two hybrid raw events")
Fixes: 9cbfa2f6 ("perf parse-events Create two hybrid hardware events")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https //lore.kernel.org/r/20210909125508.28693-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Factor out copy_config_terms() and free_config_terms() so that they can
be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https //lore.kernel.org/r/20210909125508.28693-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Some fields are missing and text_poke is duplicated. Fix that up.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210911120550.12203-1-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When building directly on the checked out repository the build process
produces a file that should be ignored, so add it to .gitignore.

Fixes: a81df63a ("perf doc: Fix doc.dep")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210910232249.739661-1-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull io_uring fixes from Jens Axboe:

 - Fix an off-by-one in a BUILD_BUG_ON() check. Not a real issue right
   now as we have plenty of flags left, but could become one. (Hao)

 - Fix lockdep issue introduced in this merge window (me)

 - Fix a few issues with the worker creation (me, Pavel, Qiang)

 - Fix regression with wq_has_sleeper() for IOPOLL (Pavel)

 - Timeout link error propagation fix (Pavel)

* tag 'io_uring-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
  io_uring: fix off-by-one in BUILD_BUG_ON check of __REQ_F_LAST_BIT
  io_uring: fail links of cancelled timeouts
  io-wq: fix memory leak in create_io_worker()
  io-wq: fix silly logic error in io_task_work_match()
  io_uring: drop ctx->uring_lock before acquiring sqd->lock
  io_uring: fix missing mb() before waitqueue_active
  io-wq: fix cancellation on create-worker failure