- 12 Mar, 2013 3 commits
-
-
Paul Zimmerman authored
This file contains code to support the HCD descriptor DMA mode of the controller Signed-off-by:
Paul Zimmerman <paulz@synopsys.com> Reviewed-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Zimmerman authored
These files contain the HCD code, and implement the Linux hc_driver API. Support for both slave mode and buffer DMA mode of the controller is included. Signed-off-by:
-
Paul Zimmerman authored
The core code provides basic services for accessing and managing the DWC_otg hardware. These services are used by both the Host Controller Driver and (in future) the Peripheral Controller Driver. Signed-off-by:
-
- 11 Mar, 2013 37 commits
-
-
Ganesan Ramalingam authored
Add support for the Network Accelerator Engine on Netlogic XLR/XLS MIPS SoCs. The XLR/XLS NAE blocks can be configured as one 10G interface or four 1G interfaces. This driver supports blocks with 1G ports. Signed-off-by:
Ganesan Ramalingam <ganesanr@broadcom.com> Signed-off-by:
-
Wei Yongjun authored
In case of error, the function anon_inode_getfile() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Wei Yongjun authored
Remove duplicated include. Signed-off-by:
-
Masanari Iida authored
Correct spelling typos in staging/comedi Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
-
H Hartley Sweeten authored
Format the multi-line comments in the kernel CodingStyle. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
H Hartley Sweeten authored
Remove all the unnecessary includes. Signed-off-by:
-
H Hartley Sweeten authored
The PCI device id is only used in the device table. Remove the define and just open code the device id. Signed-off-by:
-
H Hartley Sweeten authored
The (*insn_read) and (*insn_write) functions for all the subdevices in this driver are the same except for the 'offset' that is added to the iobase and channel to read/write a register on the board. Pass the 'offset' in s->private so we can use the same (*insn_read) and (*insn->write) functions for all the subdevices. Also, fix the (*insn_read) and (*insn_write) functions so they work correctly. The comedi core expects them to read/write insn->n data values and then return the number of values used. For aesthetic reasons, add some whitespace to the subdevice init. Remove the dev_info() noise at the end of the attach. Signed-off-by:
-
H Hartley Sweeten authored
The low-level i/o functions in this driver simply read/write a register based on the channel in insn->chanspec and an offset. Create a macro, PCI8164_AXIS(), that takes the channel number as a parameter and returns the register value. Remove the switch() statements used to figure out the 'axis_reg' and use the new macro instead. Signed-off-by:
-
H Hartley Sweeten authored
The dev_dbg() messages in the adl_pci8164_insn_{read,out} functions output the 'data' that was read/write to the device. Two 'data' values are always printed, data[0] and data[1]. The 'data' pointer points to an array of unsigned int values. The number of values in the array is indicated by insn->n. The number of data elements is never checked so the dev_dbg() could be trying to access a 'data' element that is invalid. Instead of fixing the dev_dbg() just remove them. They are really just added noise. Signed-off-by: -
H Hartley Sweeten authored
With the bus specific code split out, the device id in the boardinfo is no longer needed. Remove it. Signed-off-by:
-
H Hartley Sweeten authored
The vendor/device ids in the boardinfo are not longer needed. Remove them. Signed-off-by:
-
H Hartley Sweeten authored
This driver only uses the boardinfo to get the dev->board_name. Just use the dev->driver->driver_name and remove the unnecessary boardinfo completely. Signed-off-by:
-
H Hartley Sweeten authored
Only one board type is supported by this driver. Remove the 'interrupt' field from the boardinfo and just call the function directly in v_ADDI_Interrupt(). Signed-off-by:
-
H Hartley Sweeten authored
All the users of the addi_common code now set the dev->board_ptr before calling addi_auto_attach(). Remove the unnecessary function that searches for the boardinfo. Signed-off-by:
-
H Hartley Sweeten authored
Create an enum to the boardinfo and pass that enum in the pci_driver id_table as the driver_data. Change the macro used to fill in the device table from PCI_DEVICE() to PCI_VDEVICE(). This allows passing the enum as the next field. Set the dev->board_ptr before calling addi_auto_attach(). This removes the need for the common code to search for the boardinfo. Since the search is not done we can remove the unnecessary board information from the comedi_driver. Signed-off-by:
-
H Hartley Sweeten authored
Create an enum to the boardinfo and pass that enum in the pci_driver id_table as the driver_data. Change the macro used to fill in the device table from PCI_DEVICE() to PCI_VDEVICE(). This allows passing the enum as the next field. Set the dev->board_ptr before calling addi_auto_attach(). This removes the need for the common code to search for the boardinfo. Since the search is not done we can remove the unnecessary board information from the comedi_driver. For aesthetic reasons, move the pci device table near the pci_driver. Signed-off-by:
-
H Hartley Sweeten authored
This driver only supports a single PCI device. If we set the dev->board_ptr before calling addi_auto_attach() we remove the need for the common code to search for the boardinfo. Since the search is not done we can remove the unnecessary board information from the comedi_driver. Signed-off-by:
-
H Hartley Sweeten authored
This driver only supports a single PCI device. If we set the dev->board_ptr before calling addi_auto_attach() we remove the need for the common code to search for the boardinfo. Since the search is not done we can remove the unnecessary board information from the comedi_driver. Signed-off-by:
-
H Hartley Sweeten authored
This driver only supports a single PCI device. If we set the dev->board_ptr before calling addi_auto_attach() we remove the need for the common code to search for the boardinfo. Since the search is not done we can remove the unnecessary board information from the comedi_driver. Signed-off-by:
-
H Hartley Sweeten authored
The addi_apci_035, addi_apci_1500, addi_apci_1564, and addi_apci_3xxx drivers still use the addi_common code. Allow those drivers to set the dev->board_ptr before calling addi_auto_attach(). Signed-off-by:
-
H Hartley Sweeten authored
For aesthetic reasons, add some whitespace to the boardinfo. Signed-off-by:
-
H Hartley Sweeten authored
Create an enum to the boardinfo and pass that enum in the pci_driver id_table as the driver_data. Change the macro used to fill in the device table from PCI_DEVICE() to PCI_VDEVICE(). This allows passing the enum as the next field. This allows removing the 'devid' data from the boardinfo as well the search function that was used to locate the boardinfo for the PCI device. Cleanup some of the comments to describe the usage of the 'context' in the (*auto_attach). Signed-off-by:
-
H Hartley Sweeten authored
For aesthetic reasons, add some whitespace to the pci_driver declaration. Also, move the pci device table near the pci_driver. Signed-off-by:
-
H Hartley Sweeten authored
Create an enum to the boardinfo and pass that enum in the pci_driver id_table as the driver_data. Change the macro used to fill in the device table from PCI_DEVICE() to PCI_VDEVICE(). This allows passing the enum as the next field. This allows removing the 'device_id' data from the boardinfo as well the search function that was used to locate the boardinfo for the PCI device. Signed-off-by:
-
H Hartley Sweeten authored
For aesthetic reasons, add some whitespace to the boardinfo. Signed-off-by:
-
H Hartley Sweeten authored
This macro is not used, remove it. Signed-off-by:
-
H Hartley Sweeten authored
This macro relies on a local variable having a specific name and returns an object that variable points to. This object is the boardinfo used by the driver. The comedi core provides the comedi_board() helper to return a const pointer to the boardinfo. Remove the 'boardtype' macro and fix all the users of the 'boardtype' macro to use the comedi_board() helper to get the const boardinfo pointer. Signed-off-by:
-
H Hartley Sweeten authored
Create an enum to the boardinfo and pass that enum in the pci_driver id_table as the driver_data. A couple of the entries in the boardinfo are #if 0'ed out due to unknown device ids. Add the enums for them also but comment them out. Change the macro used to fill in the device table from PCI_DEVICE() to PCI_VDEVICE(). This allows passing the enum as the next field. This allows removing the 'device_id' data from the boardinfo as well the search function that was used to locate the boardinfo for the PCI device. Remove the dev_info function trace noise in the attach. Use the boardinfo 'board' pointer instead of accessing the data directly with the 'boardtype' macro in the attach. Signed-off-by:
-
H Hartley Sweeten authored
This macro relies on a local variable having a specific name and derives a pointer from that local variable. It's only used in the attach and we already have the local variable 'board' that has the same information. Use that instead. Signed-off-by:
-
H Hartley Sweeten authored
This macro is not used in the driver. Remove it. Signed-off-by:
-
H Hartley Sweeten authored
Create an enum to the boardinfo and pass that enum in the pci_driver id_table as the driver_data. Change the macro used to fill in the device table from PCI_DEVICE() to PCI_VDEVICE(). This allows passing the enum as the next field. This allows removing the 'dev_id' data from the boardinfo as well the search function that was used to locate the boardinfo for the PCI device. Signed-off-by:
-
H Hartley Sweeten authored
Create an enum to the boardinfo and pass that enum in the pci_driver id_table as the driver_data. Change the macro used to fill in the device table from PCI_DEVICE() to PCI_VDEVICE(). This allows passing the enum as the next field. This allows removing the 'dev_id' data from the boardinfo as well the search function that was used to locate the boardinfo for the PCI device. Signed-off-by:
-
H Hartley Sweeten authored
For aesthetic reasons, add some whitespace to the boardinfo. Signed-off-by:
-
H Hartley Sweeten authored
Create an enum to the boardinfo and pass that enum in the pci_driver id_table as the driver_data. Change the macro used to fill in the device table from PCI_DEVICE() to PCI_VDEVICE(). This allows passing the enum as the next field. This allows removing the 'dev_id' data from the boardinfo as well the search function that was used to locate the boardinfo for the PCI device. Signed-off-by:
-
H Hartley Sweeten authored
For aesthetic reasons, add some whitespace to the boardinfo. Signed-off-by:
-
H Hartley Sweeten authored
This macro is not used in the driver. Remove it. Signed-off-by:
-
