We need to ensure that we create the mirror requests before calling
nfs_pageio_add_request_mirror() on the request we are adding.
Otherwise, we can end up with a use-after-free if the call to
nfs_pageio_add_request_mirror() triggers I/O.

Fixes: c917cfaf ("NFS: Fix up NFS I/O subrequest creation")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

When a subrequest is being detached from the subgroup, we want to
ensure that it is not holding the group lock, or in the process
of waiting for the group lock.

Fixes: 5b2b5187 ("NFS: Fix nfs_page_group_destroy() and nfs_lock_and_join_requests() race cases")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

When we detach a subrequest from the list, we must also release the
reference it holds to the parent.

Fixes: 5b2b5187 ("NFS: Fix nfs_page_group_destroy() and nfs_lock_and_join_requests() race cases")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

NFSoRDMA Client Updates for Linux 5.7

New Features:
- Allow one active connection and several zombie connections to prevent
  blocking if the remote server is unresponsive.

Bugfixes and Cleanups:
- Enhance MR-related trace points
- Refactor connection set-up and disconnect functions
- Make Protection Domains per-connection instead of per-transport
- Merge struct rpcrdma_ia into rpcrdma_ep

If the FLUSH_SYNC flag is set, nfs_initiate_pgio() will currently
wait for completion, and then return the status of the I/O operation.
What we actually want to report in nfs_pageio_doio() is whether or
not the RPC call was launched successfully, whereas actual I/O
status is intended handled in the reply callbacks.

Since FLUSH_SYNC is never set by any of the callers anyway, let's
just remove that code altogether.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Move from requesting only full file layout segments, to requesting
layout segments that match our I/O size. This means the server is
still free to return a full file layout, but we will no longer
error out if it does not.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Remove the requirement that the server always sends whole file
layouts.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

When starting to read or write with a layout segment, check that the
range matches our request.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Check that the number of mirrors, and the mirror information matches
before deciding to merge layout segments in pNFS/flexfiles.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Fix up pnfs_layout_mark_request_commit() to alway reschedule the write
if the layout segment is invalid. Also minor cleanup.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Move the pNFS commit related operations into a separate structure
that can be carried by the pnfs_ds_commit_info.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Remove the unused bucket array in struct pnfs_ds_commit_info.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Lift filelayout_search_commit_reqs() into the generic pnfs/nfs code,
and add support for commit arrays.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Enable adding and lookup of per-layout segment commits in filelayout
and flexfilelayout.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Ensure that both the file and flexfiles layout types clean up when
freeing the layout segments.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Add support for scanning the full list of per-layout segment commit
arrays to nfs_clear_pnfs_ds_commit_verifiers().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Instead of trying to save the commit verifiers and checking them against
previous writes, adopt the same strategy as for buffered writes, of
just checking the verifiers at commit time.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Fix the O_DIRECT code to avoid retries if the COMMIT fails with a fatal
error.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Add a pNFS callback to allow the O_DIRECT code to release the DS
commitinfo when freeing the dreq.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Add support for scanning the full list of per-layout segment commit
arrays to pnfs_generic_commit_pagelist().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Add support for scanning the full list of per-layout segment commit
arrays to pnfs_generic_recover_commit_reqs().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Add support for scanning the full list of per-layout segment commit
arrays to pnfs_generic_scan_commit_lists()
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

When we have multiple layout segments with different lists of mirrored
data, we need to track the commits on a per layout segment basis.
This patch adds a list to support this tracking in struct
pnfs_ds_commit_info.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Change the rpcrdma_xprt_disconnect() function so that it no longer
waits for the DISCONNECTED event.  This prevents blocking if the
remote is unresponsive.

In rpcrdma_xprt_disconnect(), the transport's rpcrdma_ep is
detached. Upon return from rpcrdma_xprt_disconnect(), the transport
(r_xprt) is ready immediately for a new connection.

The RDMA_CM_DEVICE_REMOVAL and RDMA_CM_DISCONNECTED events are now
handled almost identically.

However, because the lifetimes of rpcrdma_xprt structures and
rpcrdma_ep structures are now independent, creating an rpcrdma_ep
needs to take a module ref count. The ep now owns most of the
hardware resources for a transport.

Also, a kref is needed to ensure that rpcrdma_ep sticks around
long enough for the cm_event_handler to finish.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

rpcrdma_cm_event_handler() is always passed an @id pointer that is
valid. However, in a subsequent patch, we won't be able to extract
an r_xprt in every case. So instead of using the r_xprt's
presentation address strings, extract them from struct rdma_cm_id.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

I eventually want to allocate rpcrdma_ep separately from struct
rpcrdma_xprt so that on occasion there can be more than one ep per
xprt.

The new struct rpcrdma_ep will contain all the fields currently in
rpcrdma_ia and in rpcrdma_ep. This is all the device and CM settings
for the connection, in addition to per-connection settings
negotiated with the remote.

Take this opportunity to rename the existing ep fields from rep_* to
re_* to disambiguate these from struct rpcrdma_rep.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Completion errors after a disconnect often occur much sooner than a
CM_DISCONNECT event. Use this to try to detect connection loss more
quickly.

Note that other kernel ULPs do take care to disconnect explicitly
when a WR is flushed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Clean up:
The upper layer serializes calls to xprt_rdma_close, so there is no
need for an atomic bit operation, saving 8 bytes in rpcrdma_ia.

This enables merging rpcrdma_ia_remove directly into the disconnect
logic.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Move rdma_cm_id creation into rpcrdma_ep_create() so that it is now
responsible for allocating all per-connection hardware resources.

With this clean-up, all three arms of the switch statement in
rpcrdma_ep_connect are exactly the same now, thus the switch can be
removed.

Because device removal behaves a little differently than
disconnection, there is a little more work to be done before
rpcrdma_ep_destroy() can release the connection's rdma_cm_id. So
it is not quite symmetrical with rpcrdma_ep_create() yet.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Make a Protection Domain (PD) a per-connection resource rather than
a per-transport resource. In other words, when the connection
terminates, the PD is destroyed.

Thus there is one less HW resource that remains allocated to a
transport after a connection is closed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Clean up: Simplify the synopses of functions in the connect and
disconnect paths in preparation for combining the rpcrdma_ia and
struct rpcrdma_ep structures.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Clean up: Simplify the synopses of functions in the post_send path
by combining the struct rpcrdma_ia and struct rpcrdma_ep arguments.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Clean up: prepare for combining the rpcrdma_ia and rpcrdma_ep
structures. Take the opportunity to rename the function to be
consistent with the "subsystem _ object _ verb" naming scheme.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Refactor rpcrdma_ep_create(), rpcrdma_ep_disconnect(), and
rpcrdma_ep_destroy().

rpcrdma_ep_create will be invoked at connect time instead of at
transport set-up time. It will be responsible for allocating per-
connection resources. In this patch it allocates the CQs and
creates a QP. More to come.

rpcrdma_ep_destroy() is the inverse functionality that is
invoked at disconnect time. It will be responsible for releasing
the CQs and QP.

These changes should be safe to do because both connect and
disconnect is guaranteed to be serialized by the transport send
lock.

This takes us another step closer to resolving the address and route
only at connect time so that connection failover to another device
will work correctly.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Two changes:
- Show the number of SG entries that were mapped. This helps debug
  DMA-related problems.
- Record the MR's resource ID instead of its memory address. This
  groups each MR with its associated rdma-tool output, and reduces
  needless exposure of memory addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Refactor pnfs_generic_commit_pagelist() to simplify the conversion
to layout segment based commit lists.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Just allocate the array at the end of the layout segment structure,
instead of allocating it as a separate array of pointers.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Ever since commit 2c94b8ec ("SUNRPC: Use au_rslack when computing
reply buffer size"). It changed how "req->rq_rcvsize" is calculated. It
used to use au_cslack value which was nice and large and changed it to
au_rslack value which turns out to be too small.

Since 5.1, v3 mount with sec=krb5p fails against an Ontap server
because client's receive buffer it too small.

For gss krb5p, we need to account for the mic token in the verifier,
and the wrap token in the wrap token.

RFC 4121 defines:
mic token
Octet no   Name        Description
         --------------------------------------------------------------
         0..1     TOK_ID     Identification field.  Tokens emitted by
                             GSS_GetMIC() contain the hex value 04 04
                             expressed in big-endian order in this
                             field.
         2        Flags      Attributes field, as described in section
                             4.2.2.
         3..7     Filler     Contains five octets of hex value FF.
         8..15    SND_SEQ    Sequence number field in clear text,
                             expressed in big-endian order.
         16..last SGN_CKSUM  Checksum of the "to-be-signed" data and
                             octet 0..15, as described in section 4.2.4.

that's 16bytes (GSS_KRB5_TOK_HDR_LEN) + chksum

wrap token
Octet no   Name        Description
         --------------------------------------------------------------
          0..1     TOK_ID    Identification field.  Tokens emitted by
                             GSS_Wrap() contain the hex value 05 04
                             expressed in big-endian order in this
                             field.
          2        Flags     Attributes field, as described in section
                             4.2.2.
          3        Filler    Contains the hex value FF.
          4..5     EC        Contains the "extra count" field, in big-
                             endian order as described in section 4.2.3.
          6..7     RRC       Contains the "right rotation count" in big-
                             endian order, as described in section
                             4.2.5.
          8..15    SND_SEQ   Sequence number field in clear text,
                             expressed in big-endian order.
          16..last Data      Encrypted data for Wrap tokens with
                             confidentiality, or plaintext data followed
                             by the checksum for Wrap tokens without
                             confidentiality, as described in section
                             4.2.4.

Also 16bytes of header (GSS_KRB5_TOK_HDR_LEN), encrypted data, and cksum
(other things like padding)

RFC 3961 defines known cksum sizes:
Checksum type              sumtype        checksum         section or
                                value            size         reference
   ---------------------------------------------------------------------
   CRC32                            1               4           6.1.3
   rsa-md4                          2              16           6.1.2
   rsa-md4-des                      3              24           6.2.5
   des-mac                          4              16           6.2.7
   des-mac-k                        5               8           6.2.8
   rsa-md4-des-k                    6              16           6.2.6
   rsa-md5                          7              16           6.1.1
   rsa-md5-des                      8              24           6.2.4
   rsa-md5-des3                     9              24             ??
   sha1 (unkeyed)                  10              20             ??
   hmac-sha1-des3-kd               12              20            6.3
   hmac-sha1-des3                  13              20             ??
   sha1 (unkeyed)                  14              20             ??
   hmac-sha1-96-aes128             15              20         [KRB5-AES]
   hmac-sha1-96-aes256             16              20         [KRB5-AES]
   [reserved]                  0x8003               ?         [GSS-KRB5]

Linux kernel now mainly supports type 15,16 so max cksum size is 20bytes.
(GSS_KRB5_MAX_CKSUM_LEN)

Re-use already existing define of GSS_KRB5_MAX_SLACK_NEEDED that's used
for encoding the gss_wrap tokens (same tokens are used in reply).

Fixes: 2c94b8ec ("SUNRPC: Use au_rslack when computing reply buffer size")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>