- 04 Dec, 2013 30 commits
-
-
Larry Finger authored
commit 78dbfecb upstream. The routine that processes received frames was returning the RSSI value for the signal strength; however, that value is available only for associated APs. As a result, the strength was the absurd value of 10 dBm. As a result, scans return incorrect values for the strength, which causes unwanted attempts to roam. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Larry Finger authored
commit b4ade797 upstream. The routine that processes received frames was returning the RSSI value for the signal strength; however, that value is available only for associated APs. As a result, the strength was the absurd value of 10 dBm. As a result, scans return incorrect values for the strength, which causes unwanted attempts to roam. This patch fixes https://bugzilla.kernel.org/show_bug.cgi?id=63881. Signed-off-by:
Matthieu Baerts <matttbe@gmail.com> Signed-off-by:
-
Larry Finger authored
commit 3545f3d5 upstream. The routine that processes received frames was returning the RSSI value for the signal strength; however, that value is available only for associated APs. As a result, the strength was the absurd value of 10 dBm. As a result, scans return incorrect values for the strength, which causes unwanted attempts to roam. Signed-off-by:
-
Malcolm Priestley authored
commit 9df68292 upstream. This fixes resets on heavy TX data traffic. Vendor driver VT6656_Linux_src_v1.21.03_x86_11.04.zip http://www.viaembedded.com/servlet/downloadSvl?id=1890&download_file_id=14704 This is GPL-licensed code. original code BBbVT3184Init ... //2007-0725, RobertChang add, Enable Squelch detect reset option(SQ_RST_Opt), USB (register4, bit1) CONTROLnsRequestIn(pDevice, MESSAGE_TYPE_READ, (WORD)0x600+4, // USB's Reg4's bit1 MESSAGE_REQUEST_MEM, 1, (PBYTE) &byData); byData = byData|2 ; CONTROLnsRequestOut(pDevice, MESSAGE_TYPE_WRITE, (WORD)0x600+4, // USB's Reg4's bit1 MESSAGE_REQUEST_MEM, 1, (PBYTE) &byData); return TRUE;//ntStatus; .... A back port patch is needed for kernels less than 3.10. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Vegard Nossum authored
commit ea5ec76d upstream. If the permission check fails, we drop a reference to the blkif without having taken it in the first place. The bug was introduced in commit 604c499c (xen/blkback: Check device permissions before allowing OP_DISCARD). Cc: Jan Beulich <JBeulich@suse.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Theodore Ts'o authored
commit dcb9917b upstream. Reported-by:
Dave Jones <davej@redhat.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Huang Shijie authored
commit 7b3d2fb9 upstream. [1] The gpmi uses the nand_command_lp to issue the commands to NAND chips. The gpmi issues a DMA operation with gpmi_cmd_ctrl when it handles a NAND_CMD_NONE control command. So when we read a page(NAND_CMD_READ0) from the NAND, we may send two DMA operations back-to-back. If we do not serialize the two DMA operations, we will meet a bug when 1.1) we enable CONFIG_DMA_API_DEBUG, CONFIG_DMADEVICES_DEBUG, and CONFIG_DEBUG_SG. 1.2) Use the following commands in an UART console and a SSH console: cmd 1: while true;do dd if=/dev/mtd0 of=/dev/null;done cmd 1: while true;do dd if=/dev/mmcblk0 of=/dev/null;done The kernel log shows below: ----------------------------------------------------------------- kernel BUG at lib/scatterlist.c:28! Unable to handle kernel NULL pointer dereference at virtual address 00000000 ......................... [<80044a0c>] (__bug+0x18/0x24) from [<80249b74>] (sg_next+0x48/0x4c) [<80249b74>] (sg_next+0x48/0x4c) from [<80255398>] (debug_dma_unmap_sg+0x170/0x1a4) [<80255398>] (debug_dma_unmap_sg+0x170/0x1a4) from [<8004af58>] (dma_unmap_sg+0x14/0x6c) [<8004af58>] (dma_unmap_sg+0x14/0x6c) from [<8027e594>] (mxs_dma_tasklet+0x18/0x1c) [<8027e594>] (mxs_dma_tasklet+0x18/0x1c) from [<8007d444>] (tasklet_action+0x114/0x164) ----------------------------------------------------------------- 1.3) Assume the two DMA operations is X (first) and Y (second). The root cause of the bug: Assume process P issues DMA X, and sleep on the completion @this->dma_done. X's tasklet callback is dma_irq_callback. It firstly wake up the process sleeping on the completion @this->dma_done, and then trid to unmap the scatterlist S. The waked process P will issue Y in another ARM core. Y initializes S->sg_magic to zero with sg_init_one(), while dma_irq_callback is unmapping S at the same time. See the diagram: ARM core 0 | ARM core 1 ------------------------------------------------------------- (P issues DMA X, then sleep) --> | | (X's tasklet wakes P) --> | | | <-- (P begin to issue DMA Y) | (X's tasklet unmap the | scatterlist S with dma_unmap_sg) --> | <-- (Y calls sg_init_one() to init | scatterlist S) | [2] This patch serialize both the X and Y in the following way: Unmap the DMA scatterlist S firstly, and wake up the process at the end of the DMA callback, in such a way, Y will be executed after X. After this patch: ARM core 0 | ARM core 1 ------------------------------------------------------------- (P issues DMA X, then sleep) --> | | (X's tasklet unmap the | scatterlist S with dma_unmap_sg) --> | | (X's tasklet wakes P) --> | | | <-- (P begin to issue DMA Y) | | <-- (Y calls sg_init_one() to init | scatterlist S) | Signed-off-by:
Huang Shijie <b32955@freescale.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Wang Haitao authored
commit a4d62bab upstream. Hardware: CPU: XLP832,the 64-bit OS NOR Flash:S29GL128S 128M Software: Kernel:2.6.32.41 Filesystem:JFFS2 When writing files, errors appear: Write len 182 but return retlen 180 Write of 182 bytes at 0x072c815c failed. returned -5, retlen 180 Write len 186 but return retlen 184 Write of 186 bytes at 0x072caff4 failed. returned -5, retlen 184 These errors exist only in 64-bit systems,not in 32-bit systems. After analysis, we found that the left shift operation is wrong in map_word_load_partial. For instance: unsigned char buf[3] ={0x9e,0x3a,0xea}; map_bankwidth(map) is 4; for (i=0; i < 3; i++) { int bitpos; bitpos = (map_bankwidth(map)-1-i)*8; orig.x[0] &= ~(0xff << bitpos); orig.x[0] |= buf[i] << bitpos; } The value of orig.x[0] is expected to be 0x9e3aeaff, but in this situation(64-bit System) we'll get the wrong value of 0xffffffff9e3aeaff due to the 64-bit sign extension: buf[i] is defined as "unsigned char" and the left-shift operation will convert it to the type of "signed int", so when left-shift buf[i] by 24 bits, the final result will get the wrong value: 0xffffffff9e3aeaff. If the left-shift bits are less than 24, then sign extension will not occur. Whereas the bankwidth of the nor flash we used is 4, therefore this BUG emerges. Signed-off-by:
Pang Xunlei <pang.xunlei@zte.com.cn> Signed-off-by:
Zhang Yi <zhang.yi20@zte.com.cn> Signed-off-by:
Lu Zhongjun <lu.zhongjun@zte.com.cn> Signed-off-by:
-
Brian Norris authored
commit 4355b70c upstream. Some bright specification writers decided to write this in the ONFI spec (from ONFI 3.0, Section 3.1): "The number of blocks and number of pages per block is not required to be a power of two. In the case where one of these values is not a power of two, the corresponding address shall be rounded to an integral number of bits such that it addresses a range up to the subsequent power of two value. The host shall not access upper addresses in a range that is shown as not supported." This breaks every assumption MTD makes about NAND block/chip-size dimensions -- they *must* be a power of two! And of course, an enterprising manufacturer has made use of this lovely freedom. Exhibit A: Micron MT29F32G08CBADAWP "- Plane size: 2 planes x 1064 blocks per plane - Device size: 32Gb: 2128 blockss [sic]" This quickly hits a BUG() in nand_base.c, since the extra dimensions overflow so we think it's a second chip (on my single-chip setup): ONFI param page 0 valid ONFI flash detected NAND device: Manufacturer ID: 0x2c, Chip ID: 0x44 (Micron MT29F32G08CBADAWP), 4256MiB, page size: 8192, OOB size: 744 ------------[ cut here ]------------ kernel BUG at drivers/mtd/nand/nand_base.c:203! Internal error: Oops - BUG: 0 [#1] SMP ARM [... trim ...] [<c02cf3e4>] (nand_select_chip+0x18/0x2c) from [<c02d25c0>] (nand_do_read_ops+0x90/0x424) [<c02d25c0>] (nand_do_read_ops+0x90/0x424) from [<c02d2dd8>] (nand_read+0x54/0x78) [<c02d2dd8>] (nand_read+0x54/0x78) from [<c02ad2c8>] (mtd_read+0x84/0xbc) [<c02ad2c8>] (mtd_read+0x84/0xbc) from [<c02d4b28>] (scan_read.clone.4+0x4c/0x64) [<c02d4b28>] (scan_read.clone.4+0x4c/0x64) from [<c02d4c88>] (search_bbt+0x148/0x290) [<c02d4c88>] (search_bbt+0x148/0x290) from [<c02d4ea4>] (nand_scan_bbt+0xd4/0x5c0) [... trim ...] ---[ end trace 0c9363860d865ff2 ]--- So to fix this, just truncate these dimensions down to the greatest power-of-2 dimension that is less than or equal to the specified dimension. Signed-off-by:
-
Mikulas Patocka authored
commit 3ec981e3 upstream. loop: fix crash if blk_alloc_queue fails If blk_alloc_queue fails, loop_add cleans up, but it doesn't clean up the identifier allocated with idr_alloc. That causes crash on module unload in idr_for_each(&loop_index_idr, &loop_exit_cb, NULL); where we attempt to remove non-existed device with that id. BUG: unable to handle kernel NULL pointer dereference at 0000000000000380 IP: [<ffffffff812057c9>] del_gendisk+0x19/0x2d0 PGD 43d399067 PUD 43d0ad067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: loop(-) dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_loop dm_mod ip6table_filter ip6_tables uvesafb cfbcopyarea cfbimgblt cfbfillrect fbcon font bitblit fbcon_rotate fbcon_cw fbcon_ud fbcon_ccw softcursor fb fbdev msr ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 xt_state ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc tun ipv6 cpufreq_userspace cpufreq_stats cpufreq_ondemand cpufreq_conservative cpufreq_powersave spadfs fuse hid_generic usbhid hid raid0 md_mod dmi_sysfs nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc lm85 hwmon_vid snd_hwdep snd_usbmidi_lib snd_rawmidi snd soundcore acpi_cpufreq ohci_hcd freq_table tg3 ehci_pci mperf ehci_hcd kvm_amd kvm sata_svw serverworks libphy libata ide_core k10temp usbcore hwmon microcode ptp pcspkr pps_core e100 skge mii usb_common i2c_piix4 floppy evdev rtc_cmos i2c_core processor but! ton unix CPU: 7 PID: 2735 Comm: rmmod Tainted: G W 3.10.15-devel #15 Hardware name: empty empty/S3992-E, BIOS 'V1.06 ' 06/09/2009 task: ffff88043d38e780 ti: ffff88043d21e000 task.ti: ffff88043d21e000 RIP: 0010:[<ffffffff812057c9>] [<ffffffff812057c9>] del_gendisk+0x19/0x2d0 RSP: 0018:ffff88043d21fe10 EFLAGS: 00010282 RAX: ffffffffa05102e0 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88043ea82800 RDI: 0000000000000000 RBP: ffff88043d21fe48 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 00000000000000ff R13: 0000000000000080 R14: 0000000000000000 R15: ffff88043ea82800 FS: 00007ff646534700(0000) GS:ffff880447000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000380 CR3: 000000043e9bf000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffff8100aba4 0000000000000092 ffff88043d21fe48 ffff88043ea82800 00000000000000ff ffff88043d21fe98 0000000000000000 ffff88043d21fe60 ffffffffa05102b4 0000000000000000 ffff88043d21fe70 ffffffffa05102ec Call Trace: [<ffffffff8100aba4>] ? native_sched_clock+0x24/0x80 [<ffffffffa05102b4>] loop_remove+0x14/0x40 [loop] [<ffffffffa05102ec>] loop_exit_cb+0xc/0x10 [loop] [<ffffffff81217b74>] idr_for_each+0x104/0x190 [<ffffffffa05102e0>] ? loop_remove+0x40/0x40 [loop] [<ffffffff8109adc5>] ? trace_hardirqs_on_caller+0x105/0x1d0 [<ffffffffa05135dc>] loop_exit+0x34/0xa58 [loop] [<ffffffff810a98ea>] SyS_delete_module+0x13a/0x260 [<ffffffff81221d5e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff813cff16>] system_call_fastpath+0x1a/0x1f Code: f0 4c 8b 6d f8 c9 c3 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 56 41 55 4c 8d af 80 00 00 00 41 54 53 48 89 fb 48 83 ec 18 <48> 83 bf 80 03 00 00 00 74 4d e8 98 fe ff ff 31 f6 48 c7 c7 20 RIP [<ffffffff812057c9>] del_gendisk+0x19/0x2d0 RSP <ffff88043d21fe10> CR2: 0000000000000380 ---[ end trace 64ec069ec70f1309 ]--- Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Jan Kara authored
commit 4adcf7fb upstream. ipath_user_sdma_queue_pkts() gets called with mmap_sem held for writing. Except for get_user_pages() deep down in ipath_user_sdma_pin_pages() we don't seem to need mmap_sem at all. Even more interestingly the function ipath_user_sdma_queue_pkts() (and also ipath_user_sdma_coalesce() called somewhat later) call copy_from_user() which can hit a page fault and we deadlock on trying to get mmap_sem when handling that fault. So just make ipath_user_sdma_pin_pages() use get_user_pages_fast() and leave mmap_sem locking for mm. This deadlock has actually been observed in the wild when the node is under memory pressure. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> [ Merged in fix for call to get_user_pages_fast from Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>. - Roland ] Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Eric Seppanen authored
commit 86784c6b upstream. In iSCSI negotiations with initiator CHAP enabled, usernames with trailing garbage are permitted, because the string comparison only checks the strlen of the configured username. e.g. "usernameXXXXX" will be permitted to match "username". Just check one more byte so the trailing null char is also matched. Signed-off-by:
Eric Seppanen <eric@purestorage.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Eric Seppanen authored
commit 369653e4 upstream. extract_param() is called with max_length set to the total size of the output buffer. It's not safe to allow a parameter length equal to the buffer size as the terminating null would be written one byte past the end of the output buffer. Signed-off-by:
-
Samir Benmendil authored
commit 6d5278a6 upstream. Tested with a DAWICONTROL DC-624e on 3.10.10 Signed-off-by:
Samir Benmendil <samir.benmendil@gmail.com> Signed-off-by:
Levente Kurusa <levex@linux.com> Signed-off-by:
-
xiangliang yu authored
commit 89dafa20 upstream. Tested with Marvell 88se9125, attached with one port mulitplier(5 ports) and one disk, we will get following boot log messages if using current code: ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 330) ata8.15: Port Multiplier 1.2, 0x1b4b:0x9715 r160, 5 ports, feat 0x1/0x1f ahci 0000:03:00.0: FBS is enabled ata8.00: hard resetting link ata8.00: SATA link down (SStatus 0 SControl 330) ata8.01: hard resetting link ata8.01: SATA link down (SStatus 0 SControl 330) ata8.02: hard resetting link ata8.02: SATA link down (SStatus 0 SControl 330) ata8.03: hard resetting link ata8.03: SATA link up 6.0 Gbps (SStatus 133 SControl 133) ata8.04: hard resetting link ata8.04: failed to resume link (SControl 133) ata8.04: failed to read SCR 0 (Emask=0x40) ata8.04: failed to read SCR 0 (Emask=0x40) ata8.04: failed to read SCR 1 (Emask=0x40) ata8.04: failed to read SCR 0 (Emask=0x40) ata8.03: native sectors (2) is smaller than sectors (976773168) ata8.03: ATA-8: ST3500413AS, JC4B, max UDMA/133 ata8.03: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata8.03: configured for UDMA/133 ata8.04: failed to IDENTIFY (I/O error, err_mask=0x100) ata8.15: hard resetting link ata8.15: SATA link up 6.0 Gbps (SStatus 133 SControl 330) ata8.15: Port Multiplier vendor mismatch '0x1b4b' != '0x133' ata8.15: PMP revalidation failed (errno=-19) ata8.15: hard resetting link ata8.15: SATA link up 6.0 Gbps (SStatus 133 SControl 330) ata8.15: Port Multiplier vendor mismatch '0x1b4b' != '0x133' ata8.15: PMP revalidation failed (errno=-19) ata8.15: limiting SATA link speed to 3.0 Gbps ata8.15: hard resetting link ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 320) ata8.15: Port Multiplier vendor mismatch '0x1b4b' != '0x133' ata8.15: PMP revalidation failed (errno=-19) ata8.15: failed to recover PMP after 5 tries, giving up ata8.15: Port Multiplier detaching ata8.03: disabled ata8.00: disabled ata8: EH complete The reason is that current detection code doesn't follow AHCI spec: First,the port multiplier detection process look like this: ahci_hardreset(link, class, deadline) if (class == ATA_DEV_PMP) { sata_pmp_attach(dev) /* will enable FBS */ sata_pmp_init_links(ap, nr_ports); ata_for_each_link(link, ap, EDGE) { sata_std_hardreset(link, class, deadline); if (link_is_online) /* do soft reset */ ahci_softreset(link, class, deadline); } } But, according to chapter 9.3.9 in AHCI spec: Prior to issuing software reset, software shall clear PxCMD.ST to '0' and then clear PxFBS.EN to '0'. The patch test ok with kernel 3.11.1. tj: Patch white space contaminated, applied manually with trivial updates. Signed-off-by:
Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by:
-
Larry Finger authored
commit eafbdde9 upstream. This driver uses a number of macros to get and set various fields in the RX and TX descriptors. To work correctly, a u8 pointer to the descriptor must be used; however, in some cases a descriptor structure pointer is used instead. In addition, a duplicated statement is removed. Signed-off-by:
Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by:
-
Felipe Pena authored
commit 3aef7dde upstream. There is a typo in the struct member name on assignment when checking rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40, the check uses pwrgroup_ht40 for bound limit and uses pwrgroup_ht20 when assigning instead. Signed-off-by:
Felipe Pena <felipensp@gmail.com> Acked-by:
-
Ryan Mallon authored
commit 312b4e22 upstream. Some setuid binaries will allow reading of files which have read permission by the real user id. This is problematic with files which use %pK because the file access permission is checked at open() time, but the kptr_restrict setting is checked at read() time. If a setuid binary opens a %pK file as an unprivileged user, and then elevates permissions before reading the file, then kernel pointer values may be leaked. This happens for example with the setuid pppd application on Ubuntu 12.04: $ head -1 /proc/kallsyms 00000000 T startup_32 $ pppd file /proc/kallsyms pppd: In file /proc/kallsyms: unrecognized option 'c1000000' This will only leak the pointer value from the first line, but other setuid binaries may leak more information. Fix this by adding a check that in addition to the current process having CAP_SYSLOG, that effective user and group ids are equal to the real ids. If a setuid binary reads the contents of a file which uses %pK then the pointer values will be printed as NULL if the real user is unprivileged. Update the sysctl documentation to reflect the changes, and also correct the documentation to state the kptr_restrict=0 is the default. This is a only temporary solution to the issue. The correct solution is to do the permission check at open() time on files, and to replace %pK with a function which checks the open() time permission. %pK uses in printk should be removed since no sane permission check can be done, and instead protected by using dmesg_restrict. Signed-off-by:
Ryan Mallon <rmallon@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Joe Perches <joe@perches.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Shan Hai authored
commit 0523f037 upstream. The "Slimtype DVD A DS8A9SH" drive locks up with following backtrace when the max sector is smaller than 65535 bytes, fix it by adding a quirk to set the max sector to 65535 bytes. INFO: task flush-11:0:663 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. flush-11:0 D 00000000ffff5ceb 0 663 2 0x00000000 ffff88026d3b1710 0000000000000046 0000000000000001 0000000000000000 ffff88026f2530c0 ffff88026d365860 ffff88026d3b16e0 ffffffff812ffd52 ffff88026d4fd3d0 0000000100000001 ffff88026d3b16f0 ffff88026d3b1fd8 Call Trace: [<ffffffff812ffd52>] ? cfq_may_queue+0x52/0xf0 [<ffffffff81604338>] schedule+0x18/0x30 [<ffffffff81604392>] io_schedule+0x42/0x60 [<ffffffff812f22bb>] get_request_wait+0xeb/0x1f0 [<ffffffff81065660>] ? autoremove_wake_function+0x0/0x40 [<ffffffff812eb382>] ? elv_merge+0x42/0x210 [<ffffffff812f26ae>] __make_request+0x8e/0x4e0 [<ffffffff812f068e>] generic_make_request+0x21e/0x5e0 [<ffffffff812f0aad>] submit_bio+0x5d/0xd0 [<ffffffff81141422>] submit_bh+0xf2/0x130 [<ffffffff8114474c>] __block_write_full_page+0x1dc/0x3a0 [<ffffffff81143f60>] ? end_buffer_async_write+0x0/0x120 [<ffffffff811474e0>] ? blkdev_get_block+0x0/0x70 [<ffffffff811474e0>] ? blkdev_get_block+0x0/0x70 [<ffffffff81143f60>] ? end_buffer_async_write+0x0/0x120 [<ffffffff811449ee>] block_write_full_page_endio+0xde/0x100 [<ffffffff81144a20>] block_write_full_page+0x10/0x20 [<ffffffff81148703>] blkdev_writepage+0x13/0x20 [<ffffffff810d7525>] __writepage+0x15/0x40 [<ffffffff810d7c0f>] write_cache_pages+0x1cf/0x3e0 [<ffffffff810d7510>] ? __writepage+0x0/0x40 [<ffffffff810d7e42>] generic_writepages+0x22/0x30 [<ffffffff810d7e6f>] do_writepages+0x1f/0x40 [<ffffffff8113ae67>] writeback_single_inode+0xe7/0x3b0 [<ffffffff8113b574>] writeback_sb_inodes+0x184/0x280 [<ffffffff8113bedb>] writeback_inodes_wb+0x6b/0x1a0 [<ffffffff8113c24b>] wb_writeback+0x23b/0x2a0 [<ffffffff8113c42d>] wb_do_writeback+0x17d/0x190 [<ffffffff8113c48b>] bdi_writeback_task+0x4b/0xe0 [<ffffffff810e82a0>] ? bdi_start_fn+0x0/0x100 [<ffffffff810e8321>] bdi_start_fn+0x81/0x100 [<ffffffff810e82a0>] ? bdi_start_fn+0x0/0x100 [<ffffffff8106522e>] kthread+0x8e/0xa0 [<ffffffff81039274>] ? finish_task_switch+0x54/0xc0 [<ffffffff81003334>] kernel_thread_helper+0x4/0x10 [<ffffffff810651a0>] ? kthread+0x0/0xa0 [<ffffffff81003330>] ? kernel_thread_helper+0x0/0x10 The above trace was triggered by "dd if=/dev/zero of=/dev/sr0 bs=2048 count=32768" Signed-off-by:
Shan Hai <shan.hai@windriver.com> Signed-off-by:
-
Gwendal Grignou authored
commit 3e85c3ec upstream. 6.0 Gbps link speed was not decoded properly: speed was reported at 3.0 Gbps only. Tested: On a machine where libata reports 6.0 Gbps in /var/log/messages: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Before: cat /sys/class/ata_link/link1/sata_spd 3.0 Gbps After: cat /sys/class/ata_link/link1/sata_spd 6.0 Gbps Signed-off-by:
Gwendal Grignou <gwendal@google.com> Signed-off-by:
-
Marc Kleine-Budde authored
commit 0d1862ea upstream. In the flexcan_chip_start() function first the flexcan core is going through the soft reset sequence, then the RX FIFO is enabled. With the hardware is put into FIFO mode, message buffers 1...7 are reserved by the FIFO engine. The remaining message buffers are in reset default values. This patch removes the bogus initialization of the message buffers, as it causes an imprecise external abort on imx6. Reported-by:
Lothar Waßmann <LW@KARO-electronics.de> Tested-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Ilija Hadzic authored
commit 66da0e1f upstream. When devpts is unmounted, there may be a no-longer-used IDR tree hanging off the superblock we are about to kill. This needs to be cleaned up before destroying the SB. The leak is usually not a big deal because unmounting devpts is typically done when shutting down the whole machine. However, shutting down an LXC container instead of a physical machine exposes the problem (the garbage is detectable with kmemleak). Signed-off-by:
Ilija Hadzic <ihadzic@research.bell-labs.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by:
-
KOSAKI Motohiro authored
commit 98d6f4dd upstream. Fedora Ruby maintainer reported latest Ruby doesn't work on Fedora Rawhide on ARM. (http://bugs.ruby-lang.org/issues/9008) Because of, commit 1c6b39ad (alarmtimers: Return -ENOTSUPP if no RTC device is present) intruduced to return ENOTSUPP when clock_get{time,res} can't find a RTC device. However this is incorrect. First, ENOTSUPP isn't exported to userland (ENOTSUP or EOPNOTSUP are the closest userland equivlents). Second, Posix and Linux man pages agree that clock_gettime and clock_getres should return EINVAL if clk_id argument is invalid. While the arugment that the clockid is valid, but just not supported on this hardware could be made, this is just a technicality that doesn't help userspace applicaitons, and only complicates error handling. Thus, this patch changes the code to use EINVAL. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Reported-by:
Vit Ondruch <v.ondruch@tiscali.cz> Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> [jstultz: Tweaks to commit message to include full rational] Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Takashi Iwai authored
commit afed4dbe upstream. Fixes: 4b2ffc20 ('ASoC: Blackfin I2S: add 8-bit sample support') Reported-by: David Binderman Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Nicolin Chen authored
commit 50bfcf2d upstream. It's safer to turn on regcache_cache_only before disabling regulator since the driver will turn off the regcache_cache_only after enabling regulator. If we remain cache_only false, some command like 'amixer cset' would get failure if being run before wm8962_resume(). Signed-off-by:
Nicolin Chen <b42378@freescale.com> Signed-off-by:
-
Phil Edworthy authored
commit 7b5bfb82 upstream. If you record the sound during playback, the playback sound becomes silent. Modify so that the codec driver does not clear SG_SL1::DACL bit which is controlled under widget Signed-off-by:
Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
Johan Hovold authored
commit 185d9144 upstream. The driver supports 16-bit brightness values, but the value returned from get_brightness was truncated to eight bits. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit 930ba4a3 upstream. There seems to be no active maintainer for the driver, and there is an unfixed security bug, so disable the driver for now. Hopefully someone steps up to be the maintainer, and works to get this out of staging, otherwise it will be deleted soon. Reported-by:
Nico Golde <nico@ngolde.de> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Omar Ramirez Luna <omar.ramirez@copitl.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Kanigeri, Hari <h-kanigeri2@ti.com> Cc: Ameya Palande <ameya.palande@nokia.com> Cc: Guzman Lugo, Fernando <fernando.lugo@ti.com> Cc: Hebbar, Shivananda <x0hebbar@ti.com> Cc: Ramos Falcon, Ernesto <ernesto@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Anna, Suman <s-anna@ti.com> Cc: Gupta, Ramesh <grgupta@ti.com> Cc: Gomez Castellanos, Ivan <ivan.gomez@ti.com> Cc: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Cc: Armando Uribe De Leon <x0095078@ti.com> Cc: Deepak Chitriki <deepak.chitriki@ti.com> Cc: Menon, Nishanth <nm@ti.com> Cc: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Jonathan Austin authored
commit 30aeadd4 upstream. This turns on the internal integrator LCD display(s). It seems that the code to do this got lost in refactoring of the CLCD driver. Signed-off-by:
Jonathan Austin <jonathan.austin@arm.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Russell King authored
commit f3964fe1 upstream. The CS2 region contains the Assabet board configuration and status registers, which are 32-bit. Unfortunately, some boot loaders do not configure this region correctly, leaving it setup as a 16-bit region. Fix this. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
- 29 Nov, 2013 10 commits
-
-
Greg Kroah-Hartman authored
-
Mauro Carvalho Chehab authored
commit 72a0c557 upstream. On cris arch, the functions below aren't defined: drivers/media/platform/sh_veu.c: In function 'sh_veu_reg_read': drivers/media/platform/sh_veu.c:228:2: error: implicit declaration of function 'ioread32' [-Werror=implicit-function-declaration] drivers/media/platform/sh_veu.c: In function 'sh_veu_reg_write': drivers/media/platform/sh_veu.c:234:2: error: implicit declaration of function 'iowrite32' [-Werror=implicit-function-declaration] drivers/media/platform/vsp1/vsp1.h: In function 'vsp1_read': drivers/media/platform/vsp1/vsp1.h:66:2: error: implicit declaration of function 'ioread32' [-Werror=implicit-function-declaration] drivers/media/platform/vsp1/vsp1.h: In function 'vsp1_write': drivers/media/platform/vsp1/vsp1.h:71:2: error: implicit declaration of function 'iowrite32' [-Werror=implicit-function-declaration] drivers/media/platform/vsp1/vsp1.h: In function 'vsp1_read': drivers/media/platform/vsp1/vsp1.h:66:2: error: implicit declaration of function 'ioread32' [-Werror=implicit-function-declaration] drivers/media/platform/vsp1/vsp1.h: In function 'vsp1_write': drivers/media/platform/vsp1/vsp1.h:71:2: error: implicit declaration of function 'iowrite32' [-Werror=implicit-function-declaration] drivers/media/platform/soc_camera/rcar_vin.c: In function 'rcar_vin_setup': drivers/media/platform/soc_camera/rcar_vin.c:284:3: error: implicit declaration of function 'iowrite32' [-Werror=implicit-function-declaration] drivers/media/platform/soc_camera/rcar_vin.c: In function 'rcar_vin_request_capture_stop': drivers/media/platform/soc_camera/rcar_vin.c:353:2: error: implicit declaration of function 'ioread32' [-Werror=implicit-function-declaration] Yet, they're available, as CONFIG_GENERIC_IOMAP is defined. What happens is that asm/io.h was not including asm-generic/iomap.h. Suggested-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by:
-
Junxiao Bi authored
commit 76ae281f upstream. A race window in configfs, it starts from one dentry is UNHASHED and end before configfs_d_iput is called. In this window, if a lookup happen, since the original dentry was UNHASHED, so a new dentry will be allocated, and then in configfs_attach_attr(), sd->s_dentry will be updated to the new dentry. Then in configfs_d_iput(), BUG_ON(sd->s_dentry != dentry) will be triggered and system panic. sys_open: sys_close: ... fput dput dentry_kill __d_drop <--- dentry unhashed here, but sd->dentry still point to this dentry. lookup_real configfs_lookup configfs_attach_attr---> update sd->s_dentry to new allocated dentry here. d_kill configfs_d_iput <--- BUG_ON(sd->s_dentry != dentry) triggered here. To fix it, change configfs_d_iput to not update sd->s_dentry if sd->s_count > 2, that means there are another dentry is using the sd beside the one that is going to be put. Use configfs_dirent_lock in configfs_attach_attr to sync with configfs_d_iput. With the following steps, you can reproduce the bug. 1. enable ocfs2, this will mount configfs at /sys/kernel/config and fill configure in it. 2. run the following script. while [ 1 ]; do cat /sys/kernel/config/cluster/$your_cluster_name/idle_timeout_ms > /dev/null; done & while [ 1 ]; do cat /sys/kernel/config/cluster/$your_cluster_name/idle_timeout_ms > /dev/null; done & Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Stanislaw Gruszka authored
commit 36165fd5 upstream. Polling TX statuses too frequently has two negative effects. First is randomly peek CPU usage, causing overall system functioning delays. Second bad effect is that device is not able to fill TX statuses in H/W register on some workloads and we get lot of timeouts like below: ieee80211 phy4: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2 ieee80211 phy4: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2 ieee80211 phy4: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping This not only cause flood of messages in dmesg, but also bad throughput, since rate scaling algorithm can not work optimally. In the future, we should probably make polling interval be adjusted automatically, but for now just increase values, this make mentioned problems gone. Resolve: https://bugzilla.kernel.org/show_bug.cgi?id=62781Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Trond Myklebust authored
commit a6b31d18 upstream. The following scenario can cause silent data corruption when doing NFS writes. It has mainly been observed when doing database writes using O_DIRECT. 1) The RPC client uses sendpage() to do zero-copy of the page data. 2) Due to networking issues, the reply from the server is delayed, and so the RPC client times out. 3) The client issues a second sendpage of the page data as part of an RPC call retransmission. 4) The reply to the first transmission arrives from the server _before_ the client hardware has emptied the TCP socket send buffer. 5) After processing the reply, the RPC state machine rules that the call to be done, and triggers the completion callbacks. 6) The application notices the RPC call is done, and reuses the pages to store something else (e.g. a new write). 7) The client NIC drains the TCP socket send buffer. Since the page data has now changed, it reads a corrupted version of the initial RPC call, and puts it on the wire. This patch fixes the problem in the following manner: The ordering guarantees of TCP ensure that when the server sends a reply, then we know that the _first_ transmission has completed. Using zero-copy in that situation is therefore safe. If a time out occurs, we then send the retransmission using sendmsg() (i.e. no zero-copy), We then know that the socket contains a full copy of the data, and so it will retransmit a faithful reproduction even if the RPC call completes, and the application reuses the O_DIRECT buffer in the meantime. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Michael Neuling authored
commit c13f20ac upstream. The VSX MSR bit in the user context indicates if the context contains VSX state. Currently we set this when the process has touched VSX at any stage. Unfortunately, if the user has not provided enough space to save the VSX state, we can't save it but we currently still set the MSR VSX bit. This patch changes this to clear the MSR VSX bit when the user doesn't provide enough space. This indicates that there is no valid VSX state in the user context. This is needed to support get/set/make/swapcontext for applications that use VSX but only provide a small context. For example, getcontext in glibc provides a smaller context since the VSX registers don't need to be saved over the glibc function call. But since the program calling getcontext may have used VSX, the kernel currently says the VSX state is valid when it's not. If the returned context is then used in setcontext (ie. a small context without VSX but with MSR VSX set), the kernel will refuse the context. This situation has been reported by the glibc community. Based on patch from Carlos O'Donell. Tested-by:
Haren Myneni <haren@linux.vnet.ibm.com> Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Gavin Shan authored
commit 631ad691 upstream. We need add PE to its own PELTV. Otherwise, the errors originated from the PE might contribute to other PEs. In the result, we can't clear up the error successfully even we're checking and clearing errors during access to PCI config space. Reported-by: kalshett@in.ibm.com Signed-off-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by:
-
Prarit Bhargava authored
commit 411cabf7 upstream. Commit e82b89a6 used strcat instead of strcpy which can result in an overflow of newlines on the buffer. Signed-off-by: Prarit Bhargava Cc: benh@kernel.crashing.org Cc: ben@decadent.org.uk Signed-off-by:
-
Mike Snitzer authored
commit d82ae52e upstream. Without this patch all DM devices will default to BLK_MAX_SEGMENT_SIZE (65536) even if the underlying device(s) have a larger value -- this is due to blk_stack_limits() using min_not_zero() when stacking the max_segment_size limit. 1073741824 before patch: 65536 after patch: 1073741824 Reported-by:
Lukasz Flis <l.flis@cyfronet.pl> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit a207f593 upstream. The probe function is supposed to return NULL on failure (as we can see in kobj_lookup: kobj = probe(dev, index, data); ... if (kobj) return kobj; However, in loop and brd, it returns negative error from ERR_PTR. This causes a crash if we simulate disk allocation failure and run less -f /dev/loop0 because the negative number is interpreted as a pointer: BUG: unable to handle kernel NULL pointer dereference at 00000000000002b4 IP: [<ffffffff8118b188>] __blkdev_get+0x28/0x450 PGD 23c677067 PUD 23d6d1067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: loop hpfs nvidia(PO) ip6table_filter ip6_tables uvesafb cfbcopyarea cfbimgblt cfbfillrect fbcon font bitblit fbcon_rotate fbcon_cw fbcon_ud fbcon_ccw softcursor fb fbdev msr ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 xt_state ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc tun ipv6 cpufreq_stats cpufreq_ondemand cpufreq_userspace cpufreq_powersave cpufreq_conservative hid_generic spadfs usbhid hid fuse raid0 snd_usb_audio snd_pcm_oss snd_mixer_oss md_mod snd_pcm snd_timer snd_page_alloc snd_hwdep snd_usbmidi_lib dmi_sysfs snd_rawmidi nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack snd soundcore lm85 hwmon_vid ohci_hcd ehci_pci ehci_hcd serverworks sata_svw libata acpi_cpufreq freq_table mperf ide_core usbcore kvm_amd kvm tg3 i2c_piix4 libphy microcode e100 usb_common ptp skge i2c_core pcspkr k10temp evdev floppy hwmon pps_core mii rtc_cmos button processor unix [last unloaded: nvidia] CPU: 1 PID: 6831 Comm: less Tainted: P W O 3.10.15-devel #18 Hardware name: empty empty/S3992-E, BIOS 'V1.06 ' 06/09/2009 task: ffff880203cc6bc0 ti: ffff88023e47c000 task.ti: ffff88023e47c000 RIP: 0010:[<ffffffff8118b188>] [<ffffffff8118b188>] __blkdev_get+0x28/0x450 RSP: 0018:ffff88023e47dbd8 EFLAGS: 00010286 RAX: ffffffffffffff74 RBX: ffffffffffffff74 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001 RBP: ffff88023e47dc18 R08: 0000000000000002 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88023f519658 R13: ffffffff8118c300 R14: 0000000000000000 R15: ffff88023f519640 FS: 00007f2070bf7700(0000) GS:ffff880247400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000002b4 CR3: 000000023da1d000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: 0000000000000002 0000001d00000000 000000003e47dc50 ffff88023f519640 ffff88043d5bb668 ffffffff8118c300 ffff88023d683550 ffff88023e47de60 ffff88023e47dc98 ffffffff8118c10d 0000001d81605698 0000000000000292 Call Trace: [<ffffffff8118c300>] ? blkdev_get_by_dev+0x60/0x60 [<ffffffff8118c10d>] blkdev_get+0x1dd/0x370 [<ffffffff8118c300>] ? blkdev_get_by_dev+0x60/0x60 [<ffffffff813cea6c>] ? _raw_spin_unlock+0x2c/0x50 [<ffffffff8118c300>] ? blkdev_get_by_dev+0x60/0x60 [<ffffffff8118c365>] blkdev_open+0x65/0x80 [<ffffffff8114d12e>] do_dentry_open.isra.18+0x23e/0x2f0 [<ffffffff8114d214>] finish_open+0x34/0x50 [<ffffffff8115e122>] do_last.isra.62+0x2d2/0xc50 [<ffffffff8115eb58>] path_openat.isra.63+0xb8/0x4d0 [<ffffffff81115a8e>] ? might_fault+0x4e/0xa0 [<ffffffff8115f4f0>] do_filp_open+0x40/0x90 [<ffffffff813cea6c>] ? _raw_spin_unlock+0x2c/0x50 [<ffffffff8116db85>] ? __alloc_fd+0xa5/0x1f0 [<ffffffff8114e45f>] do_sys_open+0xef/0x1d0 [<ffffffff8114e559>] SyS_open+0x19/0x20 [<ffffffff813cff16>] system_call_fastpath+0x1a/0x1f Code: 44 00 00 55 48 89 e5 41 57 49 89 ff 41 56 41 89 d6 41 55 41 54 4c 8d 67 18 53 48 83 ec 18 89 75 cc e9 f2 00 00 00 0f 1f 44 00 00 <48> 8b 80 40 03 00 00 48 89 df 4c 8b 68 58 e8 d5 a4 07 00 44 89 RIP [<ffffffff8118b188>] __blkdev_get+0x28/0x450 RSP <ffff88023e47dbd8> CR2: 00000000000002b4 ---[ end trace bb7f32dbf02398dc ]--- The brd change should be backported to stable kernels starting with 2.6.25. The loop change should be backported to stable kernels starting with 2.6.22. Signed-off-by:
-
