- 31 Mar, 2016 17 commits
-
-
Alexander Shishkin authored
When ring buffer's AUX area is unmapped and rb->aux_mmap_count drops to zero, new AUX transactions into this buffer can still be started, even though the buffer in en route to deallocation. This patch adds a check to perf_aux_output_begin() for rb->aux_mmap_count being zero, in which case there is no point starting new transactions, in other words, the ring buffers that pass a certain point in perf_mmap_close will not have their events sending new data, which clears path for freeing those buffers' pages right there and then, provided that no active transactions are holding the AUX reference. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/1457098969-21595-2-git-send-email-alexander.shishkin@linux.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
There should (and can) only be a single PMU for perf_hw_context events. This is because of how we schedule events: once a hardware event fails to schedule (the PMU is 'full') we stop trying to add more. The trivial 'fix' would break the Round-Robin scheduling we do. Signed-off-by:
-
Peter Zijlstra authored
Ingo says: "If we do a separate file we should have it in arch/x86/events/Kconfig (not in arch/x86/Kconfig.perf), and also move some of the other bits, such as PERF_EVENTS_AMD_POWER?" Suggested-by:
-
Huang Rui authored
AMD Zeppelin (Family 17h, Model 00h) introduces an instructions retired performance counter which is indicated by CPUID.8000_0008H:EBX[1]. A dedicated Instructions Retired MSR register (MSR 0xC000_000E9) increments once for every instruction retired. Signed-off-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Huang Rui authored
AMD Carrizo (Family 15h, Model 60h) introduces a time-stamp counter which is indicated by CPUID.8000_0001H:ECX[27]. It increments at a 100 MHz rate in all P-states, and C states, S0, or S1. The frequency is about 100MHz. This counter will be used to calculate processor power and other parts. So add an interface into the MSR PMU to get the PTSC counter value. Signed-off-by:
-
Thomas Gleixner authored
Add the exit function and allow the driver to be built as a module. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Thomas Gleixner authored
There is no point in WARN_ON() inside of a well known init function. We already know the call stack and it's really not of critical importance whether the registration of a PMU fails. Aside of that for consistency reasons it's just pointless to try to register another PMU if the first register attempt failed. There is also no value in keeping one PMU if the second one can not be registered. Make it consistent so we can finaly modularize the driver. Signed-off-by:
-
Thomas Gleixner authored
The whole probing functionality can simply be expressed with model matching and a bunch of structures describing the variants. This is a first step to make that driver modular. While at it, get rid of completely pointless comments and name the enums so they are self explaining. Signed-off-by:
-
Thomas Gleixner authored
The current implementation aside of being an incomprehensible mess is broken. # cat /sys/bus/event_source/devices/cstate_core/cpumask 0-17 That's on a quad socket machine with 72 physical cores! Qualitee stuff. So it's not a surprise that event migration in case of CPU hotplug does not work either. # perf stat -e cstate_core/c6-residency/ -C 1 sleep 60 & # echo 0 >/sys/devices/system/cpu/cpu1/online Tracing cstate_pmu_event_update gives me: [001] cstate_pmu_event_update <-event_sched_out After the fix it properly moves the event: [001] cstate_pmu_event_update <-event_sched_out [073] cstate_pmu_event_update <-__perf_event_read [073] cstate_pmu_event_update <-event_sched_out The migration of pkg events does not work either. Not that I'm surprised. I really could not be bothered to decode that loop mess and simply replaced it by querying the proper cpumasks which give us the answer in a comprehensible way. This also requires to direct the event to the current active reader CPU in cstate_pmu_event_init() otherwise the hotplug logic can't work. Signed-off-by:
-
Kan Liang authored
By default, the RAPL driver will be built into the kernel. If it is configured as a module, the supported CPU model can be auto loaded. Also clean up the code of rapl_pmu_init(). Based-on-a-patch-by:
Kan Liang <kan.liang@intel.com> Signed-off-by:
-
Kan Liang authored
By default, the uncore driver will be built into the kernel. If it is configured as a module, the supported CPU model can be auto loaded. This patch also cleans up the code of uncore_cpu_init() and uncore_pci_init(). Based-on-a-patch-by:
-
Ingo Molnar authored
Signed-off-by: -
Peter Zijlstra authored
Patch 5a50f529 ("perf/x86/ibs: Fix race with IBS_STARTING state") closed a big hole while opening another, smaller hole. Signed-off-by:
-
Alexander Shishkin authored
In the error path, event_file not being NULL is used to determine whether the event itself still needs to be free'd, so fix it up to avoid leaking. Reported-by:
Leon Yu <chianglungyu@gmail.com> Signed-off-by:
-
Peter Zijlstra authored
Stephane reported that commit: 3cbaa590 ("perf: Fix ctx time tracking by introducing EVENT_TIME") introduced a regression wrt. time tracking, as easily observed by: > This patch introduce a bug in the time tracking of events when > multiplexing is used. > > The issue is easily reproducible with the following perf run: > > $ perf stat -a -C 0 -e branches,branches,branches,branches,branches,branches -I 1000 > 1.000730239 652,394 branches (66.41%) > 1.000730239 597,809 branches (66.41%) > 1.000730239 593,870 branches (66.63%) > 1.000730239 651,440 branches (67.03%) > 1.000730239 656,725 branches (66.96%) > 1.000730239 <not counted> branches > > One branches event is shown as not having run. Yet, with > multiplexing, all events should run especially with a 1s (-I 1000) > interval. The delta for time_running comes out to 0. Yet, the event > has run because the kernel is actually multiplexing the events. The > problem is that the time tracking is the kernel and especially in > ctx_sched_out() is wrong now. > > The problem is that in case that the kernel enters ctx_sched_out() with the > following state: > ctx->is_active=0x7 event_type=0x1 > Call Trace: > [<ffffffff813ddd41>] dump_stack+0x63/0x82 > [<ffffffff81182bdc>] ctx_sched_out+0x2bc/0x2d0 > [<ffffffff81183896>] perf_mux_hrtimer_handler+0xf6/0x2c0 > [<ffffffff811837a0>] ? __perf_install_in_context+0x130/0x130 > [<ffffffff810f5818>] __hrtimer_run_queues+0xf8/0x2f0 > [<ffffffff810f6097>] hrtimer_interrupt+0xb7/0x1d0 > [<ffffffff810509a8>] local_apic_timer_interrupt+0x38/0x60 > [<ffffffff8175ca9d>] smp_apic_timer_interrupt+0x3d/0x50 > [<ffffffff8175ac7c>] apic_timer_interrupt+0x8c/0xa0 > > In that case, the test: > if (is_active & EVENT_TIME) > > will be false and the time will not be updated. Time must always be updated on > sched out. Fix this by always updating time if EVENT_TIME was set, as opposed to only updating time when EVENT_TIME changed. Reported-by:
Stephane Eranian <eranian@google.com> Tested-by:
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-20160330' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes: User visible changes: - Add support for skipping itrace instructions, useful to fast forward processor trace (Intel PT, BTS) to right after initialization code at the start of a workload (Andi Kleen) - Add support for backtraces in perl 'perf script's (Dima Kogan) - Add -U/-K (--all-user/--all-kernel) options to 'perf mem' (Jiri Olsa) - Make -f/--force option documentation consistent across tools (Jiri Olsa) Infrastructure changes: - Add 'perf test' to check for event times (Jiri Olsa) - 'perf config' cleanups (Taeung Song) Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo-20160330' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix determination of a callchain node's childlessness in the top/report TUI, which was preventing navigating some callchains, --stdio unnaffected (Andres Freund) - Fix jitdump's genelf assumption that PowerPC is big endian only (Anton Blanchard) Signed-off-by:
-
- 30 Mar, 2016 12 commits
-
-
Anton Blanchard authored
Commit 9b07e27f ("perf inject: Add jitdump mmap injection support") incorrectly assumed that PowerPC is big endian only. Simplify things by consolidating the define of GEN_ELF_ENDIAN and checking for __BYTE_ORDER == __BIG_ENDIAN. The PowerPC checks were also incorrect, they do not match what gcc emits. We should first look for __powerpc64__, then __powerpc__. Signed-off-by:
Anton Blanchard <anton@samba.org> Acked-by:
Michael Ellerman <mpe@ellerman.id.au> Cc: Carl Love <cel@us.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Fixes: 9b07e27f ("perf inject: Add jitdump mmap injection support") Link: http://lkml.kernel.org/r/20160329175944.33a211cc@krytenSigned-off-by:
-
Andres Freund authored
The 4b3a3212 ("perf hists browser: Support flat callchains") commit over-aggressively tried to optimize callchain_node__init_have_children(). That lead to --tui mode not allowing to expand call chain elements if a call chain element had only one parent. That's why --inverted callgraphs looked halfway sane, but plain ones didn't. Revert that individual optimization, it wasn't really related to the rest of the commit. Signed-off-by:
Andres Freund <andres@anarazel.de> Acked-by:
Namhyung Kim <namhyung@kernel.org> Tested-by:
-
Andi Kleen authored
When using 'perf script' to look at PT traces it is often useful to ignore the initialization code at the beginning. On larger traces which may have many millions of instructions in initialization code doing that in a pipeline can be very slow, with perf script spending a lot of CPU time calling printf and writing data. This patch adds an extension to the --itrace argument that skips 'n' events (instructions, branches or transactions) at the beginning. This is much more efficient. v2: Add support for BTS (Adrian Hunter) Document in itrace.txt Fix branch check Check transactions and instructions too Committer note: To test intel_pt one needs to make sure VT-x isn't active, i.e. stopping KVM guests on the test machine, as described by Andi Kleen at http://lkml.kernel.org/r/20160301234953.GD23621@tassilo.jf.intel.comSigned-off-by:
Andi Kleen <ak@linux.intel.com> Tested-by:
-
Dima Kogan authored
We have some infrastructure to use perl or python to analyze logs generated by perf. Prior to this patch, only the python tools had access to backtrace information. This patch makes this information available to perl scripts as well. Example: Let's look at malloc() calls made by the seq utility. First we create a probe point: $ perf probe -x /lib/x86_64-linux-gnu/libc.so.6 malloc Added new events: ... Now we run seq, while monitoring malloc() calls with perf $ perf record --call-graph=dwarf -e probe_libc:malloc seq 5 1 2 3 4 5 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.064 MB perf.data (6 samples) ] We can use perf to look at its log to see the malloc calls and the backtrace $ perf script seq 14195 [000] 1927993.748254: probe_libc:malloc: (7f9ff8edd320) bytes=0x22 7f9ff8edd320 malloc (/lib/x86_64-linux-gnu/libc-2.22.so) 7f9ff8e8eab0 set_binding_values.part.0 (/lib/x86_64-linux-gnu/libc-2.22.so) 7f9ff8e8eda1 __bindtextdomain (/lib/x86_64-linux-gnu/libc-2.22.so) 401b22 main (/usr/bin/seq) 7f9ff8e82610 __libc_start_main (/lib/x86_64-linux-gnu/libc-2.22.so) 402799 _start (/usr/bin/seq) ... We can also use the scripting facilities. We create a skeleton perl script that simply prints out the events $ perf script -g perl generated Perl script: perf-script.pl We can then use this script to see the malloc() calls with a backtrace. Prior to this patch, the backtrace was not available to the perl scripts. $ perf script -s perf-script.pl probe_libc::malloc 0 1927993.748254260 14195 seq __probe_ip=140325052863264, bytes=34 [7f9ff8edd320] malloc [7f9ff8e8eab0] set_binding_values.part.0 [7f9ff8e8eda1] __bindtextdomain [401b22] main [7f9ff8e82610] __libc_start_main [402799] _start ... Tested-by:Dima Kogan <dima@secretsauce.net>
-
Taeung Song authored
Change the variable name 'v' to 'home' to make it more readable. Signed-off-by:
Taeung Song <treeze.taeung@gmail.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1459099340-16911-3-git-send-email-treeze.taeung@gmail.comSigned-off-by:
-
Taeung Song authored
To avoid repeated calling perf_config() remove buildid_dir_command_config() and add new perf_buildid_config into perf_default_config. Because perf_config() is already called with perf_default_config at main(). Signed-off-by:
-
Taeung Song authored
Signed-off-by:
-
Jiri Olsa authored
This test creates software event 'cpu-clock' attaches it in several ways and checks that enabled and running times match. Committer notes: Testing it: [acme@jouet linux]$ perf test -v times 44: Test events times : --- start --- test child forked, pid 27170 attaching to spawned child, enable on exec OK : ena 307328, run 307328 attaching to current thread as enabled OK : ena 7826, run 7826 attaching to current thread as disabled OK : ena 738, run 738 attaching to CPU 0 as enabled SKIP : not enough rights attaching to CPU 0 as enabled SKIP : not enough rights test child finished with -2 ---- end ---- Test events times: Skip [acme@jouet linux]$ [root@jouet ~]# perf test times 44: Test events times : Ok [root@jouet ~]# perf test -v times 44: Test events times : --- start --- test child forked, pid 27306 attaching to spawned child, enable on exec OK : ena 479290, run 479290 attaching to current thread as enabled OK : ena 11356, run 11356 attaching to current thread as disabled OK : ena 987, run 987 attaching to CPU 0 as enabled OK : ena 3717, run 3717 attaching to CPU 0 as enabled OK : ena 2323, run 2323 test child finished with 0 ---- end ---- Test events times: Ok [root@jouet ~]# Signed-off-by: -
Jiri Olsa authored
Signed-off-by:
-
Jiri Olsa authored
No need to export hists__collapse_insert_entry function. Signed-off-by:
-
Jiri Olsa authored
Add -U/-K (--all-user/--all-kernel) options to use the perf record --all-user/--all-kernel options. Signed-off-by:
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo-20160329' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fix from Arnaldo Carvalho de Melo: - Add missing initialization of perf_sample.cpumode in synthesized samples, affects jitdump, records for pre-existing threads and records synthesized from processor trace data, noticed while testing intel_pt events with 'perf script' (Arnaldo Carvalho de Melo) Signed-off-by:
-
- 29 Mar, 2016 2 commits
-
-
Arnaldo Carvalho de Melo authored
In 473398a2 ("perf tools: Add cpumode to struct perf_sample"), I missed some places where perf_sample fields are directly initialized in addition to what is done in perf_evsel__parse_sample(), namely when synthesizing PERF_RECORD_{MMAP*,COMM,FORK,EXIT} for pre-existing threads and also in intel_pt and intel_bts when synthesizing events from processor trace, the jitdump code also was affected, fix it. The problem was noticed with running: # perf record -e intel_pt//u true # perf script Where the samples wouldn't get resolved because perf_sample.cpumode would be left as zero, i.e. PERF_RECORD_MISC_CPUMODE_UNKNOWN, not resolving as kernel, hypervisor or user cpu modes. Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 473398a2 ("perf tools: Add cpumode to struct perf_sample") Link: http://lkml.kernel.org/n/tip-n5sdauxgk24d5nun8kuuu2mh@git.kernel.orgSigned-off-by:
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo-20160328' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fix from Arnaldo Carvalho de Melo: - Fix build break on PowerPC due to missing headers with prototypes for functions defined in tools/perf/arch/powerpc/util/header.c (Sukadev Bhattiprolu) Signed-off-by:
-
- 28 Mar, 2016 1 commit
-
-
Sukadev Bhattiprolu authored
Commit 531d2410 ("perf tools: Do not include stringify.h from the kernel sources") seems to have accidentially removed the inclusion of "util/header.h" from "arch/powerpc/util/header.c". "util/header.h" provides the prototype for get_cpuid() and is needed to build perf on Powerpc: arch/powerpc/util/header.c:17:1: error: no previous prototype for 'get_cpuid' [-Werror=missing-prototypes] Reported-by:
Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> [ Included "util.h" too, to get the scnprintf() prototype ] Signed-off-by:
-
- 25 Mar, 2016 2 commits
-
-
Huang Rui authored
randconfig builds can sometimes disable CONFIG_CPU_SUP_INTEL while enabling the AMD power reporting PMU driver, resulting in this build failure: arch/x86/kernel/cpu/perf_event.h:663:31: error: 'events_sysfs_show' undeclared here (not in a function) To fix it, move events_sysfs_show() outside of #ifdef CONFIG_CPU_SUP_INTEL. Reported-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
build test robot <lkp@intel.com> Signed-off-by:
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo-20160324' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix detached tarball building due to missing 'perf bench memcpy' headers (Arnaldo Carvalho de Melo) - Fix tarpkg build test error output redirection (Arnaldo Carvalho de Melo) Signed-off-by:
-
- 24 Mar, 2016 3 commits
-
-
Arnaldo Carvalho de Melo authored
A change on kernel files included by the 'perf bench memcpy' code grew some new include deps, breaking the detached tarball build: $ make -C tools/perf build-test make: Entering directory '/home/acme/git/linux/tools/perf' - tarpkg: ./tests/perf-targz-src-pkg . tests/make:302: recipe for target 'tarpkg' failed make[1]: *** [tarpkg] Error 2 Makefile:102: recipe for target 'build-test' failed make: *** [build-test] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ cat tools/perf/tarpkg ./tests/perf-targz-src-pkg . PERF_VERSION = 4.5.g05f5ec PERF_VERSION = 4.5.g05f5ec In file included from bench/mem-memcpy-x86-64-asm.S:9:0: bench/../../../arch/x86/lib/memcpy_64.S:5:29: fatal error: asm/cpufeatures.h: No such file or directory compilation terminated. mv: cannot stat ‘bench/.mem-memcpy-x86-64-asm.o.tmp’: No such file or directory make[5]: *** [bench/mem-memcpy-x86-64-asm.o] Error 1 make[5]: *** Waiting for unfinished jobs.... make[4]: *** [bench] Error 2 make[4]: *** Waiting for unfinished jobs.... make[3]: *** [perf-in.o] Error 2 make[3]: *** Waiting for unfinished jobs.... make[2]: *** [all] Error 2 $ Add arch/*/include/asm/*features.h to tools/perf/MANIFEST so that we can continue to use detached tarballs to build perf. Now it builds ok, doing it manually: $ make help | grep perf perf-tar-src-pkg - Build perf-4.5.0.tar source tarball perf-targz-src-pkg - Build perf-4.5.0.tar.gz source tarball perf-tarbz2-src-pkg - Build perf-4.5.0.tar.bz2 source tarball perf-tarxz-src-pkg - Build perf-4.5.0.tar.xz source tarball $ ls -la perf-4.5.0.tar ls: cannot access perf-4.5.0.tar: No such file or directory $ make perf-tar-src-pkg TAR PERF_VERSION = 4.5.g32c25b $ ls -la perf-4.5.0.tar -rw-rw-r--. 1 acme acme 6318080 Mar 24 11:52 perf-4.5.0.tar $ mv perf-4.5.0.tar /tmp $ cd /tmp $ tar xf perf-4.5.0.tar $ cd perf-4.5.0/tools/perf $ make > /dev/null PERF_VERSION = 4.5.g32c25b $ ls -la perf -rwxrwxr-x. 1 acme acme 14046416 Mar 24 11:53 perf $ ./perf --version perf version 4.5.g32c25b $ perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks futex: Futex stressing benchmarks all: All benchmarks $ perf bench mem # List of available benchmarks for collection 'mem': memcpy: Benchmark for memcpy() functions memset: Benchmark for memset() functions all: Run all memory access benchmarks $ perf bench mem memcpy # Running 'mem/memcpy' benchmark: # function 'default' (Default memcpy() provided by glibc) # Copying 1MB bytes ... 15.024038 GB/sec # function 'x86-64-unrolled' (unrolled memcpy() in arch/x86/lib/memcpy_64.S) # Copying 1MB bytes ... 17.438616 GB/sec # function 'x86-64-movsq' (movsq-based memcpy() in arch/x86/lib/memcpy_64.S) # Copying 1MB bytes ... 25.040064 GB/sec # function 'x86-64-movsb' (movsb-based memcpy() in arch/x86/lib/memcpy_64.S) # Copying 1MB bytes ... 25.040064 GB/sec $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-2c2sncwffuabw58fj1pw86gu@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
So we need to trow away just stdout, leaving stderr to be caught by the build tests infrastructure, so that we can see what went wrong when the tarpkg build test fails: $ make -C tools/perf build-test make: Entering directory '/home/acme/git/linux/tools/perf' - tarpkg: ./tests/perf-targz-src-pkg . tests/make:302: recipe for target 'tarpkg' failed make[1]: *** [tarpkg] Error 2 Makefile:102: recipe for target 'build-test' failed make: *** [build-test] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ cat tools/perf/tarpkg ./tests/perf-targz-src-pkg . PERF_VERSION = 4.5.g05f5ec PERF_VERSION = 4.5.g05f5ec In file included from bench/mem-memcpy-x86-64-asm.S:9:0: bench/../../../arch/x86/lib/memcpy_64.S:5:29: fatal error: asm/cpufeatures.h: No such file or directory compilation terminated. mv: cannot stat ‘bench/.mem-memcpy-x86-64-asm.o.tmp’: No such file or directory make[5]: *** [bench/mem-memcpy-x86-64-asm.o] Error 1 make[5]: *** Waiting for unfinished jobs.... make[4]: *** [bench] Error 2 make[4]: *** Waiting for unfinished jobs.... make[3]: *** [perf-in.o] Error 2 make[3]: *** Waiting for unfinished jobs.... make[2]: *** [all] Error 2 $ So the test flow is: 1. Run: 'make -C tools/perf build-test' 2. One of its tests failed, in this case, the 'tarpkg' one 3. Look at what went wrong, by looking at the output of that test, in tools/perf/tarpkg Admittedly, this should be shortcircuited to showing what went wrong directly from the 'make build-test' step, but lets first fix this tarpkg one and the problem it spotted, which should be fixed by adding some extra file to the tools/perf/MANIFEST so that detached tarballs continue being self contained and build successfully. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ynld6egoxolmftcddpnd7oh6@git.kernel.orgSigned-off-by: -
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-20160323' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core improvements and fixes: User visible fixes: - Fix documentation of :ppp modifier in 'perf list' (Andi Kleen) - Fix silly nodes bitfield bits/bytes length assertion in 'perf bench numa' (Jakub Jelen) - Remove redundant CPU output in libtraceevent (Steven Rostedt) - Remove 'core_id' check in topology 'perf test' (Sukadev Bhattiprolu) Infrastructure changes/fixes: - Record text offset in dso to calculate objdump address, to use with modules in addition to vDSO symbol address calculations (Wang Nan) - Move utilities.mak from perf to tools/scripts/ (Arnaldo Carvalho de Melo) - Add cpumode to the perf_sample struct, this way we don't need to pass the union event to the machine and thread resolving routines, shortening function signatures and allowing the future introduction of a way to use tracepoint events instead of the unavailable HW cycles counter on powerpc guests in perf kvm by just hooking on perf_evsel__parse_sample, at the end (Arnaldo Carvalho de Melo) - Remove/unexport die() related infrastructure, that at some point will finally be removed (Arnaldo Carvalho de Melo) - Adopt linux/stringify.h from the kernel sources, not to touch this kernel header from tools/ (Arnaldo Carvalho de Melo) - Stop using strbuf for things we can instead trivially use libc's asprintf() (Arnaldo Carvalho de Melo) - Ditch tools/lib/util/abspath.c, its only exported function was used at just one place and can be replaced by libc's realpath() (Arnaldo Carvalho de Melo) - Use strerror_r() in the llvm infrastructure, tread safe, its what is used elsewhere in tools/perf/ (Arnaldo Carvalho de Melo) Cleanups: - Removed misplaced or needless __maybe_unused/export (Arnaldo Carvalho de Melo) Signed-off-by:
-
- 23 Mar, 2016 3 commits
-
-
Arnaldo Carvalho de Melo authored
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-5njrq9dltckgm624omw9ljgu@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
To kill the last user of make_nonrelative_path(), that gets ditched, one more panicking function killed. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-3hu56rvyh4q5gxogovb6ko8a@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-nq1wvtky4mpu0nupjyar7sbw@git.kernel.orgSigned-off-by:
-
