Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>

Merge tag 'keys-misc-20160708' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into next

The Smack working tree has moved from gitorious to github.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>

Add a separate Kconfig option for SAMPLES_SECCOMP.

Main reason for this is that, just like other samples, it's forced to
be a module.

Without this, since the sample is a target only controlled by
CONFIG_SECCOMP_FILTER, the samples will be built before include files are
put in place properly. For example, from an arm64 allmodconfig built with
"make -sk -j 32" (without specific target), the following happens:

  samples/seccomp/bpf-fancy.c:13:27: fatal error: linux/seccomp.h: No such file or directory
  samples/seccomp/bpf-helper.h:20:50: fatal error: linux/seccomp.h: No such file or directory
  samples/seccomp/dropper.c:20:27: fatal error: linux/seccomp.h: No such file or directory
  samples/seccomp/bpf-direct.c:21:27: fatal error: linux/seccomp.h: No such file or directory

So, just stick to the same format as other samples.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Kees Cook <keescook@chromium.org>

Extend the PCR supplied as a parameter, instead of assuming that the
measurement entry uses the default configured PCR.
Signed-off-by: Eric Richter <erichte@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

IMA avoids re-measuring files by storing the current state as a flag in
the integrity cache. It will then skip adding a new measurement log entry
if the cache reports the file as already measured.

If a policy measures an already measured file to a new PCR, the measurement
will not be added to the list. This patch implements a new bitfield for
specifying which PCR the file was measured into, rather than if it was
measured.
Signed-off-by: Eric Richter <erichte@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

Template entry duplicates are prevented from being added to the
measurement list by checking a hash table that contains the template
entry digests. However, the PCR value is not included in this comparison,
so duplicate template entry digests with differing PCRs may be dropped.

This patch redefines duplicate template entries as template entries with
the same digest and same PCR values.
Reported-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Eric Richter <erichte@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

IMA assumes that the same default Kconfig PCR is extended for each
entry. This patch replaces the default configured PCR with the policy
defined PCR.
Signed-off-by: Eric Richter <erichte@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

The IMA measurement list entries include the Kconfig defined PCR value.
This patch defines a new ima_template_entry field for including the PCR
as specified in the policy rule.
Signed-off-by: Eric Richter <erichte@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

Different policy rules may extend different PCRs. This patch retrieves
the specific PCR for the matched rule.  Subsequent patches will include
the rule specific PCR in the measurement list and extend the appropriate
PCR.
Signed-off-by: Eric Richter <erichte@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

This patch defines a new IMA measurement policy rule option "pcr=",
which allows extending different PCRs on a per rule basis. For example,
the system independent files could extend the default IMA Kconfig
specified PCR, while the system dependent files could extend a different
PCR.

The following is an example of this usage with an SELinux policy; the
rule would extend PCR 11 with system configuration files:

  measure func=FILE_CHECK mask=MAY_READ obj_type=system_conf_t pcr=11

Changelog v3:
- FIELD_SIZEOF returns bytes, not bits. Fixed INVALID_PCR
Signed-off-by: Eric Richter <erichte@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

To keep track of which measurements have been extended to which PCRs, this
patch defines a new integrity_iint_cache field named measured_pcrs. This
field is a bitmask of the PCRs measured. Each bit corresponds to a PCR
index. For example, bit 10 corresponds to PCR 10.
Signed-off-by: Eric Richter <erichte@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>

SMACK uses similar functions to control CIPSO, these are
the equivalent functions for CALIPSO and follow exactly
the same semantics.

int netlbl_cfg_calipso_add(struct calipso_doi *doi_def,
                           struct netlbl_audit *audit_info)
    Adds a CALIPSO doi.

void netlbl_cfg_calipso_del(u32 doi, struct netlbl_audit *audit_info)
    Removes a CALIPSO doi.

int netlbl_cfg_calipso_map_add(u32 doi, const char *domain,
                               const struct in6_addr *addr,
                               const struct in6_addr *mask,
                               struct netlbl_audit *audit_info)
    Creates a mapping between a domain and a CALIPSO doi.  If
    addr and mask are non-NULL this creates an address-selector
    type mapping.

This also extends netlbl_cfg_map_del() to remove IPv6 address-selector
mappings.
Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

This works in exactly the same way as the CIPSO label cache.
The idea is to allow the lsm to cache the result of a secattr
lookup so that it doesn't need to perform the lookup for
every skbuff.

It introduces two sysctl controls:
 calipso_cache_enable - enables/disables the cache.
 calipso_cache_bucket_size - sets the size of a cache bucket.
Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

Lengths, checksum and the DOI are checked.  Checking of the
level and categories are left for the socket layer.

CRC validation is performed in the calipso module to avoid
unconditionally linking crc_ccitt() into ipv6.
Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

This makes it possible to route the error to the appropriate
labelling engine.  CALIPSO is far less verbose than CIPSO
when encountering a bogus packet, so there is no need for a
CALIPSO error handler.
Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

In some cases, the lsm needs to add the label to the skbuff directly.
A NF_INET_LOCAL_OUT IPv6 hook is added to selinux to match the IPv4
behaviour.  This allows selinux to label the skbuffs that it requires.
Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

Request sockets need to have a label that takes into account the
incoming connection as well as their parent's label.  This is used
for the outgoing SYN-ACK and for their child full-socket.
Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

If set, these will take precedence over the parent's options during
both sending and child creation.  If they're not set, the parent's
options (if any) will be used.

This is to allow the security_inet_conn_request() hook to modify the
IPv6 options in just the same way that it already may do for IPv4.
Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

If a socket has a netlabel in place then don't let setsockopt() alter
the socket's IPv6 hop-by-hop option.  This is in the same spirit as
the existing check for IPv4.
Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

CALIPSO is a hop-by-hop IPv6 option.  A lot of this patch is based on
the equivalent CISPO code.  The main difference is due to manipulating
the options in the hop-by-hop header.
Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

This is to allow the CALIPSO labelling engine to use these.
Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

The functionality is equivalent to ipv6_renew_options() except
that the newopt pointer is in kernel, not user, memory

The kernel memory implementation will be used by the CALIPSO network
labelling engine, which needs to be able to set IPv6 hop-by-hop
options.
Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

Remove a specified DOI through the NLBL_CALIPSO_C_REMOVE command.
It requires the attribute:
 NLBL_CALIPSO_A_DOI.
Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

This extends the NLBL_MGMT_C_ADD and NLBL_MGMT_C_ADDDEF commands
to accept CALIPSO protocol DOIs.
Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

Enumerate the DOI list through the NLBL_CALIPSO_C_LISTALL command.
It takes no attributes.
Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

Query a specified DOI through the NLBL_CALIPSO_C_LIST command.
It requires the attribute:
 NLBL_CALIPSO_A_DOI.

The reply will contain:
 NLBL_CALIPSO_A_MTYPE
Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

CALIPSO is a packet labelling protocol for IPv6 which is very similar
to CIPSO.  It is specified in RFC 5570.  Much of the code is based on
the current CIPSO code.

This adds support for adding passthrough-type CALIPSO DOIs through the
NLBL_CALIPSO_C_ADD command.  It requires attributes:

 NLBL_CALIPSO_A_TYPE which must be CALIPSO_MAP_PASS.
 NLBL_CALIPSO_A_DOI.

In passthrough mode the CALIPSO engine will map MLS secattr levels
and categories directly to the packet label.

At this stage, the major difference between this and the CIPSO
code is that IPv6 may be compiled as a module.  To allow for
this the CALIPSO functions are registered at module init time.
Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

The reason is to allow different labelling protocols for
different address families with the same domain.

This requires the addition of an address family attribute
in the netlink communication protocol.  It is used in several
messages:

NLBL_MGMT_C_ADD and NLBL_MGMT_C_ADDDEF take it as an optional
attribute for the unlabelled protocol.  It may be one of AF_INET,
AF_INET6 or AF_UNSPEC (to specify both address families).  If it
is missing, it defaults to AF_UNSPEC.

NLBL_MGMT_C_LISTALL and NLBL_MGMT_C_LISTDEF return it as part of
the enumeration of each item.  Addtionally, it may be sent to
LISTDEF to specify which address family to return.
Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

This fixes sparse errors of the form:
  incompatible types in comparison expression (different address spaces)
Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>

When running make C=2 M=drivers/char/tpm/

  CHECK   drivers/char/tpm//tpm_crb.c
drivers/char/tpm//tpm_crb.c:248:31: warning: incorrect type in return expression (different address spaces)
drivers/char/tpm//tpm_crb.c:248:31:    expected void [noderef] <asn:2>*
drivers/char/tpm//tpm_crb.c:248:31:    got void *

CC: stable@vger.kernel.org
Fixes: 1bd047be ("tpm_crb: Use devm_ioremap_resource")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>

When running make C=2 M=drivers/char/tpm/

  CC [M]  drivers/char/tpm//tpm_crb.o
  CHECK   drivers/char/tpm//tpm_vtpm_proxy.c
drivers/char/tpm//tpm_vtpm_proxy.c:552:32: warning: incorrect type in assignment (different address spaces)
drivers/char/tpm//tpm_vtpm_proxy.c:552:32:    expected struct vtpm_proxy_new_dev *vtpm_new_dev_p
drivers/char/tpm//tpm_vtpm_proxy.c:552:32:    got void [noderef] <asn:1>*argp
drivers/char/tpm//tpm_vtpm_proxy.c:553:51: warning: incorrect type in argument 2 (different address spaces)
drivers/char/tpm//tpm_vtpm_proxy.c:553:51:    expected void const [noderef] <asn:1>*from
drivers/char/tpm//tpm_vtpm_proxy.c:553:51:    got struct vtpm_proxy_new_dev *vtpm_new_dev_p
drivers/char/tpm//tpm_vtpm_proxy.c:559:34: warning: incorrect type in argument 1 (different address spaces)
drivers/char/tpm//tpm_vtpm_proxy.c:559:34:    expected void [noderef] <asn:1>*to
drivers/char/tpm//tpm_vtpm_proxy.c:559:34:    got struct vtpm_proxy_new_dev *vtpm_new_dev_p

The __user annotation was missing from the corresponding variable.

Fixes: 794c38e01358 ("tpm: Proxy driver for supporting multiple emulated TPMs")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>

Spi protocol standardized by the TCG is now supported by most of TPM
vendors.

It supports SPI Bit Protocol as describe in the TCG PTP
specification (chapter 6.4.6 SPI Bit Protocol).

Irq mode is not supported.

This commit is based on the initial work by Peter Huewe.
Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

To avoid code duplication between the old tpm_tis and the new and future
native tcg tis driver(ie: spi, i2c...), the tpm_tis driver was reworked,
so that all common logic is extracted and can be reused from all drivers.

The core methods can also be used from other TIS like drivers.

itpm workaround is now managed with a specific tis flag
TPM_TIS_ITPM_POSSIBLE.

This commit is based on the initial work by Peter Huewe.
Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Add missing vendor to vendor-prefix.txt.

Trusted Computing Group design common specifications for
TPM (Trusted Platform Module) vendors.
TCG designates a TPM answering to a public specification.

This commit is based on the initial work by Peter Huewe.

Cc: devicetree@vger.kernel.org
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

Add missing vendor to vendor-prefix.txt

This commit is based on the initial work by Peter Huewe.

Cc: devicetree@vger.kernel.org
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

This splits tpm_tis in a high-level protocol part and a low-level interface
for the actual TPM communication. The low-level interface can then be
implemented by additional drivers to provide access to TPMs using other
mechanisms, for example native I2C or SPI transfers, while still reusing
the same TIS protocol implementation.

Though the ioread/iowrite calls cannot fail, other implementations of this
interface might want to return error codes if their communication fails.

This follows the usual pattern of negative values representing errors and
zero representing success. Positive values are not used (yet).

Errors are passed back to the caller if possible. If the interface of a
function does not allow that, it tries to do the most sensible thing it
can, but this might also mean ignoring the error in this instance.

This commit is based on the initial work by Peter Huewe.
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>