- 08 Dec, 2011 7 commits
-
-
Catalin Marinas authored
This patch introduces the pgtable-3level*.h files with definitions specific to the LPAE page table format (3 levels of page tables). Each table is 4KB and has 512 64-bit entries. An entry can point to a 40-bit physical address. The young, write and exec software bits share the corresponding hardware bits (negated). Other software bits use spare bits in the PTE. The patch also changes some variable types from unsigned long or int to pteval_t or pgprot_t. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
Will Deacon authored
Before we enable the MMU, we must ensure that the TTBR registers contain sane values. After the MMU has been enabled, we jump to the *virtual* address of the following function, so we also need to ensure that the SCTLR write has taken effect. This patch adds ISB instructions around the SCTLR write to ensure the visibility of the above. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
Catalin Marinas authored
This patch modifies the proc-v7.S file so that it only contains code shared between classic MMU and LPAE. The non-common code is factored out into a separate file. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
Catalin Marinas authored
The FSR structure is different with LPAE and this patch moves the classic MMU specific definition to a separate fsr-2level.c file that is included in fault.c. It also moves the fsr_fs and FSR bits to the fault.h file. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
Catalin Marinas authored
The page table maintenance macros need to be duplicated between the classic and the LPAE MMU so this patch moves those that are not common to the pgtable-2level.h file. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
Russell King authored
Nick Piggin noted upon introducing 4level-fixup.h: | Add a temporary "fallback" header so architectures can run with | the 4level pagetables patch without modification. All architectures | should be converted to use the folding headers (include/asm-generic/ | pgtable-nop?d.h) as soon as possible, and the fallback header removed. This makes ARM compliant with this statement. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
Catalin Marinas authored
With the arch/arm code conversion to pgtable-nopud.h, the section and supersection (un|re)map code triggers compiler warnings on UP systems. This is caused by pmd_offset() being given a pgd_t argument rather than a pud_t one. This patch makes the necessary conversion with the assumption that the pud is folded into the pgd. The page table setting code only loops over the pmd which is enough with the classic page tables. This code is not compiled when LPAE is enabled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
- 06 Dec, 2011 6 commits
-
-
Will Deacon authored
The ARM SMP booting code allocates a temporary set of page tables containing an identity mapping of the kernel image and provides this to secondary CPUs for initial booting. In reality, we only need to include the __turn_mmu_on function in the identity mapping since the rest of the kernel is executing from virtual addresses after this point. This patch adds __turn_mmu_on to the .idmap.text section, allowing the SMP booting code to use the idmap_pgd directly and not have to populate its own set of page table. As a result of this patch, we can make the identity_mapping_add function static (since it is only used within mm/idmap.c) and also remove the identity_mapping_del function. The identity map population is moved to an early initcall so that it is setup in time for secondary CPU bringup. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
-
Will Deacon authored
__create_page_tables identity maps the region of memory from __enable_mmu to the end of __turn_mmu_on. In preparation for including __turn_mmu_on in the .idmap.text section, this patch modifies the identity mapping so that it only includes the __turn_mmu_on code. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
-
Will Deacon authored
For soft-rebooting a system, it is necessary to map the MMU-off code with an identity mapping so that execution can continue safely once the MMU has been switched off. Currently, switch_mm_for_reboot takes out a 1:1 mapping from 0x0 to TASK_SIZE during reboot in the hope that the reset code lives at a physical address corresponding to a userspace virtual address. This patch modifies the code so that we switch to the idmap_pgd tables, which contain a 1:1 mapping of the cpu_reset code. This has the advantage of only remapping the code that we need and also means we don't need to worry about allocating a pgd from an atomic context in the case that the physical address of the cpu_reset code aliases with the virtual space used by the kernel. Acked-by: Dave Martin <dave.martin@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
-
Will Deacon authored
The CPU reset functions disable the MMU and therefore must be executed with an identity mapping in place. This patch places the CPU reset functions into the .idmap.text section, causing the idmap code to include them as part of the identity mapping. Acked-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
-
Will Deacon authored
The ARM CPU suspend code requires cpu_resume_mmu to be identity mapped in order to re-enable the MMU when coming out of suspend. Currently, this is accomplished by maintaining a suspend_pgd with the relevant mapping put in place at init time. This patch replaces the use of suspend_pgd with the new idmap_pgd. cpu_resume_mmu is placed in the .idmap.text section so that it is included in the identity map. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Dave Martin <dave.martin@linaro.org> Tested-by: Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
-
Will Deacon authored
When disabling and re-enabling the MMU, it is necessary to take out an identity mapping for the code that manipulates the SCTLR in order to avoid it disappearing from under our feet. This is useful when soft rebooting and returning from CPU suspend. This patch allocates a set of page tables during boot and populates them with an identity mapping for the .idmap.text section. This means that users of the identity map do not need to manage their own pgd and can instead annotate their functions with __idmap or, in the case of assembly code, place them in the correct section. Acked-by: Dave Martin <dave.martin@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
-
- 05 Dec, 2011 2 commits
-
-
Santosh Shilimkar authored
Fix the below build break by including common.h arch/arm/mach-omap2/cpuidle34xx.c: In function 'omap3_enter_idle': arch/arm/mach-omap2/cpuidle34xx.c:117: error: implicit declaration of function 'omap_irq_pending' make[1]: *** [arch/arm/mach-omap2/cpuidle34xx.o] Error 1 make: *** [arch/arm/mach-omap2] Error 2 Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Santosh Shilimkar authored
Fix the build break by adding the necessary irq functions to common header. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 03 Dec, 2011 1 commit
-
-
Russell King authored
Merge branch 'irqchip-consolidation' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into devel-stable
-
- 02 Dec, 2011 2 commits
-
-
Axel Lin authored
Trivial fix to fix below build error: CC arch/arm/mach-exynos/mach-universal_c210.o arch/arm/mach-exynos/mach-universal_c210.c:24: error: expected identifier or '(' before '<' token Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Axel Lin authored
Fix below build error: CC arch/arm/mach-exynos/cpu.o arch/arm/mach-exynos/cpu.c: In function 'exynos4_init_irq': arch/arm/mach-exynos/cpu.c:245: error: 'gic_bank_offset' undeclared (first use in this function) arch/arm/mach-exynos/cpu.c:245: error: (Each undeclared identifier is reported only once arch/arm/mach-exynos/cpu.c:245: error: for each function it appears in.) arch/arm/mach-exynos/cpu.c:243: warning: unused variable 'bank_offset' make[1]: *** [arch/arm/mach-exynos/cpu.o] Error 1 make: *** [arch/arm/mach-exynos] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
- 21 Nov, 2011 5 commits
-
-
Russell King authored
Merge branch 'irqchip-consolidation' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into devel-stable Conflicts: arch/arm/mach-omap2/board-4430sdp.c arch/arm/mach-omap2/board-omap4panda.c arch/arm/mach-omap2/include/mach/omap4-common.h arch/arm/plat-omap/include/plat/irqs.h The changes to omap4-common.h were moved to arch/arm/mach-omap2/common.h and the other trivial conflicts resolved. The now empty ifdef in irqs.h was also eliminated.
-
Russell King authored
-
Russell King authored
The poodle restart handler was added in 74617fb6 (3593/1: Add reboot and shutdown handlers for Zaurus handhelds), and at that time it was necessary to deal with the RCSR register. This commit also forced all restarts to use the 'hard' restart method. In dc38e2ad (pxa: Fix RCSR handling), the RCSR handling was removed, leaving just the forcing to use a 'hard' restart. As hard restarts are the default (in the absense of a reboot= command line argument), this seems pointless. In any case, Richard Purdie says: > From what I remember that hardware either always reboots or always > halts. I think the option was therefore left hardcoded to make it clear > it wasn't expected to work. Later Zaurii models could do either but > required some manual poking of registers to make it happen iirc. > > Regardless, you can probably clean this up as you suggest now. So, lets remove the unnecessary interception and rely on the default restart mode. Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Rather than having separate extern declarations in nuc9*.h, provide a common header file containing these definitions. Tested-by: Wan Zongshun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
We only need to set the system up for a soft-restart if we're going to be doing a soft-restart. Provide a new function (soft_restart()) which does the setup and final call for this, and make platforms use it. Eliminate the call to setup_restart() from the default handler. This means that platforms arch_reset() function is no longer called with the page tables prepared for a soft-restart, and caches will still be enabled. Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Krzysztof Ha■asa <khc@pm.waw.pl> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 17 Nov, 2011 3 commits
-
-
Russell King authored
The separate files for clps711x which contain maybe one or two data structures or functions is an inefficient use of files, and encourages further small files as other changes happen. Collapse down these into a single core.c file. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Tony Lindgren authored
As suggested by Russell King - ARM Linux <linux@arm.linux.org.uk>, there's no need to keep local prototypes in non-local headers. Add mach-omap1/common.h and mach-omap2/common.h and move the local prototypes there from plat/common.h and mach/omap4-common.h. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
IRQs are already disabled by the time arch_reset() is called, so these calls to local_irq_disable() instead arch_reset() are redundant. Remove them. Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 15 Nov, 2011 14 commits
-
-
Jamie Iles authored
Now that all platforms are converted to MULTI_IRQ_HANDLER, remove the legacy support. Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Jamie Iles <jamie@jamieiles.com>
-
Jamie Iles authored
Now that there is a generic IRQ handler for multiple VIC devices use it for picoxcell to help building multi platform kernels. Signed-off-by: Jamie Iles <jamie@jamieiles.com>
-
Jamie Iles authored
Now that there is a generic IRQ handler for multiple VIC devices use it for samsung to help building multi platform kernels. Cc: Kukjin Kim <kgene.kim@samsung.com> Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Jamie Iles <jamie@jamieiles.com>
-
Jamie Iles authored
Now that there is a generic IRQ handler for multiple VIC devices use it for versatile to help building multi platform kernels. Cc: Russell King <linux@arm.linux.org.uk> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com>
-
Jamie Iles authored
Now that there is a generic IRQ handler for multiple VIC devices use it for u300 to help building multi platform kernels. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jamie Iles <jamie@jamieiles.com>
-
Jamie Iles authored
Now that there is a generic IRQ handler for multiple VIC devices use it for spear to help building multi platform kernels. Acked-by: Viresh Kumar <viresh.kumar@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com>
-
Jamie Iles authored
Now that there is a generic IRQ handler for multiple VIC devices use it for s3c64xx to help building multi platform kernels. Cc: Ben Dooks <ben-linux@fluff.org> Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Jamie Iles <jamie@jamieiles.com>
-
Jamie Iles authored
Now that there is a generic IRQ handler for multiple VIC devices use it for nomadik to help building multi platform kernels. Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Jamie Iles <jamie@jamieiles.com>
-
Jamie Iles authored
Now that there is a generic IRQ handler for multiple VIC devices use it for netx to help building multi platform kernels. Signed-off-by: Jamie Iles <jamie@jamieiles.com>
-
Jamie Iles authored
Now that there is a generic IRQ handler for multiple VIC devices use it for ep93xx to help building multi platform kernels. Cc: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com>
-
Jamie Iles authored
Add a handler for the VIC that is suitable for MULTI_IRQ_HANDLER platforms. This can replace the ASM entry macros for platforms that use the VIC. v4: - rebase ontop of move __exception and friends to asm/exception.h - rework polling loop to handle as many irqs as possible in one go v3: - simplify irq handling loop as suggested by Grant - service interrupts from msb->lsb order v2: - allow the handler be used for !CONFIG_OF - use irq_domain_to_irq() Cc: Rob Herring <robherring2@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Jamie Iles <jamie@jamieiles.com>
-
Jamie Iles authored
This adds a device tree binding for the VIC based on the of_irq_init() support. This adds an irqdomain to the vic and always registers all vics in the static vic array rather than for pm only to keep track of the irq domain. struct irq_data::hwirq is used where appropriate rather than runtime masking. v3: - include linux/export.h for THIS_MODULE v2: - use irq_domain_simple_ops - remove stub implementation of vic_of_init for !CONFIG_OF - Make VIC select IRQ_DOMAIN Reviewed-by: Rob Herring <robherring2@gmail.com> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Jamie Iles <jamie@jamieiles.com>
-
Marc Zyngier authored
Now that MULTI_IRQ_HANDLER is selected by all the in-tree GIC users, make it mandatory and remove the unused macros. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Marc Zyngier authored
After the MULTI_IRQ_HANDLER conversion, a couple of global variables can be removed. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-