- 01 Nov, 2017 37 commits
-
-
Serge Semin authored
Battery charging settings are supported by USB251xb hubs only. USB2517i isn't one of them. So we need to reflect it within the device-specific data structure. The driver doesn't support dts property changing this setting, but instead defaults it with zero. So the flag isn't used anywhere in the driver, but still can be helpful in future, when necessity of the corresponding dts setting arises. Signed-off-by:
Serge Semin <fancer.lancer@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Serge Semin authored
USB electrical signaling drive strength boost bit is also supported by USB2517 hub. Since it got three addition ports, the designers needed to add one more register for initialization. It turned out to be formerly reserved 0xF7. As before we just initialize it with default zeros. Signed-off-by:
Richard Leitner <richard.leitner@skidata.com> Signed-off-by:
-
Serge Semin authored
USB2517 got three additionl downstream ports, which can as well be mapped to another logical ports. USB251xb driver currently doesn't fully support such setting configuration from dts file. This patch doesn't change this, but adds usb2517 spcific ports default liner mapping. Signed-off-by:
-
Serge Semin authored
USB251xb as well as USB2517 datasheet states, that all these hubs differ by number of ports declared as the last digit in the model name. So USB2512 got two ports, USB2513 - three, and so on. Such setting must be reflected in the device specific data structure and corresponding dts property should be checked whether it doesn't get out of available ports. Signed-off-by:
-
Serge Semin authored
There are USB2517 and USB2517i hubs, which have almost the same registers space as already supported USB251xBi series. The difference it in DIDs and in a few functions. This patch adds the USB2517/i data structures to the driver, so it would have different setting depending on the device discovered on i2c-bus. Signed-off-by:
-
Serge Semin authored
Since hub usb2517 is going to be supported by the usb251xb driver, the bindings need to be properly updated. Particularly: - add "microchip,usb2517" and "microchip,usb2517i" compatible strings. - add "boolean" description to all the properties, which really accept a boolean value including a new one "led-{usb,speed}-mode". - move reset-gpios property to the optional section. It isn't defined as required in the code and shouldn't be required at all, since hardware may handle reset pins by itself. - add new led-{usb,speed}-mode mode property. USB2517 device supports two LED modes: USB mode and speed (default) indication mode. The last one can be switched on by this property. - add {bp,sp}-max-{total,removable}-current-microamp property measured in microamp. It hasn't been defined as property before. Since the limitation specified by these parameters is hardware specific it needs to be defined in dts. Signed-off-by:Rob Herring <robh@kernel.org> Signed-off-by:
-
Jules Maselbas authored
Documentation modification, now interrupt-parent is an optional property. Also fix few typos. Signed-off-by:
Jules Maselbas <jules.maselbas@grenoble-inp.org> Reported-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Jules Maselbas authored
We do not have to test if platform_data pointer is null in max3421_hub_control(), as the driver probe will fail if no platform_data is found. Fixes: 721fdc83 ("usb: max3421: Add devicetree support") Signed-off-by:
Julia Lawall <julia.lawall@lip6.fr> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Alex Elder authored
No Qualcomm SoC requires the "phy-qcom-8x16-usb.c" USB phy driver support any more, so remove the code. Suggested-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Alex Elder <elder@linaro.org> Acked-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
-
Alex Elder authored
No Qualcomm SoC requires the "phy-msm-usb.c" USB phy driver support any more, so remove the code. Suggested-by:
-
Alex Elder authored
No Qualcomm SoC requires the "ehci-msm.c" code any more. So remove it. Suggested-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Colin Ian King authored
Pointer urbp is assigned but is never read, hence it is redundant and can be removed. Cleans up clang warning: drivers/usb/c67x00/c67x00-sched.c:975:2: warning: Value stored to 'urbp' is never read Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1162594 Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115016 Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115006 Addresses-Coverity-ID: 115007 Signed-off-by:
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Adds a static tracking variable to match the timer global. Signed-off-by:
Kees Cook <keescook@chromium.org> Acked-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. This rearranges the arrays of timers to minimize the need for a pointer back to the main structure. Cc: Chris Brandt <chris.brandt@renesas.com> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: "Gustavo A. R. Silva" <garsilva@embeddedor.com> Cc: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by:
-
Alan Stern authored
Commit 8b52291a ("usb-storage: fix deadlock involving host lock and scsi_done") added a local variable to usb_stor_control_thread() in the usb-storage driver. This local variable holds the value of us->srb, for use after the host lock has been released. But as long as we have the value in a local variable, we may as well use it instead of dereferencing the us pointer all over the place. This patch makes no functional change; it just makes the code a little shorter and a little neater. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115004 Addresses-Coverity-ID: 115005 Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
Himanshu Jha authored
Use put_unaligned_le32 rather than using byte ordering function and memcpy which makes code clear. Also, add the header file where it is declared. Done using Coccinelle and semantic patch used is : @ rule1 @ identifier tmp; expression ptr,x; type T; @@ - tmp = cpu_to_le32(x); <+... when != tmp - memcpy(ptr, (T)&tmp, ...); + put_unaligned_le32(x,ptr); ...+> @ depends on rule1 @ type j; identifier tmp; @@ - j tmp; ...when != tmp Signed-off-by:
Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
-
Bin Liu authored
Now struct musb has the timer (dev_timer) for glue drivers, so let's remove the duplicated timer defined in dsps glue driver, and use dev_timer defined in struct musb. Signed-off-by:
Bin Liu <b-liu@ti.com> Reviewed-by:
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Instead of a per-device static timer variable, a spare timer "dev_timer" is added to the musb structure for devices to use for their per-device timer. Cc: linux-usb@vger.kernel.org Signed-off-by:
-
- 30 Oct, 2017 3 commits
-
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1397608 Signed-off-by:
-
Alexandre Bailon authored
There is some registers defined in da8xx.c though they are not used. These registers are also defined and used in musb_cppi41.c Remove these defines from da8xx.c. Signed-off-by:
Alexandre Bailon <abailon@baylibre.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
-
