- 29 Dec, 2016 18 commits
-
-
Michael Chan authored
Accept ipv6 flows in .ndo_rx_flow_steer() and support ETHTOOL_GRXCLSRULE ipv6 flows. Signed-off-by: Michael Chan <michael.chan@broadocm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Assign additional vnics to VFs whenever possible so that NTUPLE can be supported on the VFs. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The existing hardware RFS mode uses one hardware RSS context block per ring just to calculate the RSS hash. This is very wasteful and prevents VF functions from using it. The new hardware mode shares the same hardware RSS context for RSS placement and RFS steering. This allows VFs to enable RFS. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Add function bnxt_rfs_supported() that determines if the chip supports RFS. Refactor the existing function bnxt_rfs_capable() that determines if run-time conditions support RFS. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The new vnic RSS capability will enhance NTUPLE support, to be added in subsequent patches. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Call tcp_gro_complete() in the common code path instead of the chip- specific method. The newer 5731x method is missing the call. Signed-off-by: Michael Chan <michael.chan@broadcmo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The advertising field is closely related to the auto_link_speeds field. The former is the user setting while the latter is the firmware setting. Both should be u16. We should use the advertising field in bnxt_get_link_ksettings because the auto_link_speeds field may not be updated with the latest from the firmware yet. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The IRQ is disabled by writing to the completion ring doorbell. This should be done before the hardware completion ring is freed for correctness. The current code disables IRQs after all the completion rings are freed. Fix it by calling bnxt_disable_int_sync() before freeing the completion rings. Rearrange the code to avoid forward declaration. Signed-off-by: Michael Chan <michael.chan@broadocm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
For better busy polling and GRO support. Do not re-arm IRQ if napi_complete_done() returns false. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Use native NAPI polling instead. The next patch will complete the work by switching to use napi_complete_done() Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Rename DAUGTHER_ID to DAUGHTER_ID to fix spelling mistake Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dave Jones authored
np is already assigned in the variable declaration of ping_v6_sendmsg. At this point, we have already dereferenced np several times, so the NULL check is also redundant. Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
jpinto authored
When the hardware is synthesized with multiple queues, all queues are disabled for default. This patch adds the rx queues configuration. This patch was successfully tested in a Synopsys QoS Reference design. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Haishuang Yan authored
Different namespace application might require different maximal number of remembered connection requests. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Haishuang Yan authored
Different namespace application might require fast recycling TIME-WAIT sockets independently of the host. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shyam Saini authored
when some other buffer is immediately copied into allocated region. Replace calls to kmalloc followed by a memcpy with a direct call to kmemdup. Signed-off-by: Shyam Saini <mayhs11saini@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Several macros use non-standard styles where format and arguments are not verified. Convert these to a more typical fmt, ##__VA_ARGS__ use so format and arguments match as appropriate. Miscellanea: o Fix format and argument mismatches o Realign and reindent misindented block o Strip newlines from formats and add to macro defines o Coalesce a few consecutive logging uses to more simple single uses Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Logging macros should allow format and argument validation. The DB_TX, DB_RX, and DB_GEN macros did not. Update the macros and uses and add no_printk validation to the previously compiled away #ifndef DEBUG variants. Done with coccinelle and some typing. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 28 Dec, 2016 10 commits
-
-
Marcelo Ricardo Leitner authored
This pr_debug may help identify why the system is generating some Aborts. It's not something a sysadmin would be expected to use. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gao Feng authored
There are three functions which would invoke the ipvlan_count_rx. They are ipvlan_process_multicast, ipvlan_rcv_frame, and ipvlan_nf_input. The former two functions already use the ipvlan directly before ipvlan_count_rx, and ipvlan_nf_input gets the ipvlan from ipvl_addr->master, it is not possible to be NULL too. So the ipvlan pointer check is unnecessary in ipvlan_count_rx. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gao Feng authored
There are some duplicated codes in ipvlan_add_addr6/4 and ipvlan_del_addr6/4. Now define two common functions ipvlan_add_addr and ipvlan_del_addr to decrease the duplicated codes. It could be helful to maintain the codes. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Marcelo Ricardo Leitner says: ==================== SCTP cleanups Some cleanups/simplifications I've been collecting. Resending now with net-next open. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
There is no reason to use this cascading. It doesn't add anything. Let's remove it and simplify. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
Make it a bit easier to read. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Various ipvlan fixes from Eric Dumazet and Mahesh Bandewar. The most important is to not assume the packet is RX just because the destination address matches that of the device. Such an assumption causes problems when an interface is put into loopback mode. 2) If we retry when creating a new tc entry (because we dropped the RTNL mutex in order to load a module, for example) we end up with -EAGAIN and then loop trying to replay the request. But we didn't reset some state when looping back to the top like this, and if another thread meanwhile inserted the same tc entry we were trying to, we re-link it creating an enless loop in the tc chain. Fix from Daniel Borkmann. 3) There are two different WRITE bits in the MDIO address register for the stmmac chip, depending upon the chip variant. Due to a bug we could set them both, fix from Hock Leong Kweh. 4) Fix mlx4 bug in XDP_TX handling, from Tariq Toukan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: stmmac: fix incorrect bit set in gmac4 mdio addr register r8169: add support for RTL8168 series add-on card. net: xdp: remove unused bfp_warn_invalid_xdp_buffer() openvswitch: upcall: Fix vlan handling. ipv4: Namespaceify tcp_tw_reuse knob net: korina: Fix NAPI versus resources freeing net, sched: fix soft lockup in tc_classify net/mlx4_en: Fix user prio field in XDP forward tipc: don't send FIN message from connectionless socket ipvlan: fix multicast processing ipvlan: fix various issues in ipvlan_process_multicast()
-
- 27 Dec, 2016 7 commits
-
-
Kweh, Hock Leong authored
Fixing the gmac4 mdio write access to use MII_GMAC4_WRITE only instead of OR together with MII_WRITE. Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Acked-By: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Chun-Hao Lin authored
This chip is the same as RTL8168, but its device id is 0x8161. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
After commit 73b62bd0 ("virtio-net: remove the warning before XDP linearizing"), there's no users for bpf_warn_invalid_xdp_buffer(), so remove it. This is a revert for commit f23bc46c. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
pravin shelar authored
Networking stack accelerate vlan tag handling by keeping topmost vlan header in skb. This works as long as packet remains in OVS datapath. But during OVS upcall vlan header is pushed on to the packet. When such packet is sent back to OVS datapath, core networking stack might not handle it correctly. Following patch avoids this issue by accelerating the vlan tag during flow key extract. This simplifies datapath by bringing uniform packet processing for packets from all code paths. Fixes: 5108bbad ("openvswitch: add processing of L3 packets"). CC: Jarno Rajahalme <jarno@ovn.org> CC: Jiri Benc <jbenc@redhat.com> Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Haishuang Yan authored
Different namespaces might have different requirements to reuse TIME-WAIT sockets for new connections. This might be required in cases where different namespace applications are in place which require TIME_WAIT socket connections to be reduced independently of the host. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Gleixner authored
If mce_device_init() fails then the mce device pointer is NULL and the AMD mce code happily dereferences it. Add a sanity check. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Gleixner authored
The attempt to prevent overwriting an active state resulted in a disaster which effectively disables all dynamically allocated hotplug states. Cleanup the mess. Fixes: dc280d93 ("cpu/hotplug: Prevent overwriting of callbacks") Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 26 Dec, 2016 5 commits
-
-
Al Viro authored
Split asm-only parts of arm64 uaccess.h into a new header and use that from *.S. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Florian Fainelli authored
Commit beb0babf ("korina: disable napi on close and restart") introduced calls to napi_disable() that were missing before, unfortunately this leaves a small window during which NAPI has a chance to run, yet we just freed resources since korina_free_ring() has been called: Fix this by disabling NAPI first then freeing resource, and make sure that we also cancel the restart task before doing the resource freeing. Fixes: beb0babf ("korina: disable napi on close and restart") Reported-by: Alexandros C. Couloumbis <alex@ozo.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Shahar reported a soft lockup in tc_classify(), where we run into an endless loop when walking the classifier chain due to tp->next == tp which is a state we should never run into. The issue only seems to trigger under load in the tc control path. What happens is that in tc_ctl_tfilter(), thread A allocates a new tp, initializes it, sets tp_created to 1, and calls into tp->ops->change() with it. In that classifier callback we had to unlock/lock the rtnl mutex and returned with -EAGAIN. One reason why we need to drop there is, for example, that we need to request an action module to be loaded. This happens via tcf_exts_validate() -> tcf_action_init/_1() meaning after we loaded and found the requested action, we need to redo the whole request so we don't race against others. While we had to unlock rtnl in that time, thread B's request was processed next on that CPU. Thread B added a new tp instance successfully to the classifier chain. When thread A returned grabbing the rtnl mutex again, propagating -EAGAIN and destroying its tp instance which never got linked, we goto replay and redo A's request. This time when walking the classifier chain in tc_ctl_tfilter() for checking for existing tp instances we had a priority match and found the tp instance that was created and linked by thread B. Now calling again into tp->ops->change() with that tp was successful and returned without error. tp_created was never cleared in the second round, thus kernel thinks that we need to link it into the classifier chain (once again). tp and *back point to the same object due to the match we had earlier on. Thus for thread B's already public tp, we reset tp->next to tp itself and link it into the chain, which eventually causes the mentioned endless loop in tc_classify() once a packet hits the data path. Fix is to clear tp_created at the beginning of each request, also when we replay it. On the paths that can cause -EAGAIN we already destroy the original tp instance we had and on replay we really need to start from scratch. It seems that this issue was first introduced in commit 12186be7 ("net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup"). Fixes: 12186be7 ("net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup") Reported-by: Shahar Klein <shahark@mellanox.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Tested-by: Shahar Klein <shahark@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
-
Larry Finger authored
I am getting the following warning when I build kernel 4.9-git on my PowerBook G4 with a 32-bit PPC processor: AS arch/powerpc/kernel/misc_32.o arch/powerpc/kernel/misc_32.S:299:7: warning: "CONFIG_FSL_BOOKE" is not defined [-Wundef] This problem is evident after commit 989cea5c ("kbuild: prevent lib-ksyms.o rebuilds"); however, this change in kbuild only exposes an error that has been in the code since 2005 when this source file was created. That was with commit 9994a338 ("powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S"). The offending line does not make a lot of sense. This error does not seem to cause any errors in the executable, thus I am not recommending that it be applied to any stable versions. Thanks to Nicholas Piggin for suggesting this solution. Fixes: 9994a338 ("powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-