Add a device tree node to describe the DisplayPort connector, and
connect it to the DPSUB output.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Michal Simek <michal.simek@amd.com>

The DPSUB DT bindings now specify ports to model the connections with
the programmable logic and the DisplayPort output. Add them to the
device tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Michal Simek <michal.simek@amd.com>

Add partial live video support, with a single video input that bypasses
blending. Skip registration of the DRM device in that case, but register
the DRM bridge instead. The DRM device will be created by the driver for
the display controller in the PL.

Full live video mode with concurrent usage of the video and gfx inputs,
and blending in the DPSUB video pipeline, is currently unsupported.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

To prepare for usage of the DPSUB as a DisplayPort bridge without
creating a DRM device, make initialization and usage of the DMA engine
optional. The flag that controls this feature is currently hardcoded to
operating with the DMA engine, this will be made dynamic based on the
device tree configuration in a subsequent change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Add a mode parameter to the zynqmp_disp_layer_enable() to set the layer
mode, to prepare for live mode support.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

To prepare for live video input support, parse the device tree to find
the connected ports. Warn about unsupported configurations, and error
out when invalid.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

The better convey its purpose, rename the zynqmp_dpsub_handle_vblank()
function that belongs to the DRM layer to
zynqmp_dpsub_drm_handle_vblank().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

To complete the decoupling of the DRM device from the zynqmp_dpsub,
group all DRM-related structures in a zynqmp_dpsub_drm structure and
allocate it separately from the zynqmp_dpsub. The DRM managed allocation
of the drm_device now doesn't cover the zynqmp_dpsub anymore, so we need
to register a cleanup action to release the zynqmp_dpsub when the
drm_device is released.

The will allow usage of the DisplayPort encoder as a standalone bridge,
without registering a DRM device in this driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Continue the isolation of DRM/KMS code by moving all DRM init and
cleanup from zynqmp_dpsub.c to zynqmp_kms.c.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

The zynqmp_disp and zynqmp_dp structures are allocated with
drmm_kzalloc(). While this simplifies management of memory, it requires
a DRM device, which will not be available at probe time when the DP
bridge will be used standalone, with a DRM device in the PL. To prepare
for this, switch to manual allocation for zynqmp_disp and zynqmp_dp. The
cleanup still uses the DRM managed infrastructure, but one level up, at
the top level. This will be addressed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

There's no need to delay bridge initialization, move it to
zynqmp_dp_probe() and drop the zynqmp_dp_drm_init() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

To prepare for operating as a standalone DP bridge with the DRM device
implemented in the PL, move registration of the AUX bus to bridge attach
time, as that's the earliest point when a DRM device is available.

The DRM device pointer stored in zynqmp_dp isn't used anymore, drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Decouple the planes handling from the display controller programming by
moving the corresponding code from zynqmp_disp.c to zynqmp_kms.c. This
prepares for using the DPSUB with a live video input, without creating
DRM planes in the DPSUB driver.

While at it, fix a typo in a comment.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Decouple the CRTC handling from the display controller programming by
moving the corresponding code from zynqmp_disp.c to zynqmp_kms.c. This
prepares for using the DPSUB with a live video input, without creating a
DRM CRTC in the DPSUB driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Start preparation for using the DPSUB as a standalone DisplayPort
encoder without a display controller by moving the DRM/KMS
initialization to a new zynqmp_kms.c file. No functional change
intended.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Decouple the zynqmp_disp, which handles the hardware configuration, from
the DRM planes by moving the planes to the zynqmp_dpsub structure. The
planes handling code will be moved to a separate file in a subsequent
step.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Decouple the zynqmp_disp, which handles the hardware configuration, from
the DRM CRTC by moving the CRTC to the zynqmp_dpsub structure. The CRTC
handling code will be moved to a separate file in a subsequent step.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

The audio clock is an external resource from the DPSUB point of view,
not a resource internal to the display controller. Move it to the
zynqmp_dpsub structure, to allow accessing it from outside the disp
code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

The video clock is an external resource from the DPSUB point of view,
not a resource internal to the display controller. Move it to the
zynqmp_dpsub structure, to allow accessing it from outside the disp
code.

While at it, rename the fields from pclk and pclk_from_ps to vid_clk and
vid_clk_from_ps, to better reflect their purpose and match the
documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

The array of formats passed to drm_universal_plane_init() doesn't need
to outlive the function call, as it's copied internally. Use kcalloc()
instead of drmm_kcalloc() to allocate it, and free it right after usage.

While at it, move the allocation and initialization of the formats array
to a separate function, to prepare for splitting the DRM plane handling
to a separate file.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Use the ARRAY_SIZE() macro to iterate over arrays, instead of hardcoding
their size. This makes the code less error-prone should the array size
change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

The zynqmp_disp_layer_set_format() function only needs format
information, not a full plane state. Get the necessary info from the
plane state in the caller and pass it to zynqmp_disp_layer_set_format().
This prepares for calling the function from non-DRM code. This doesn't
introduce any functional change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Reuse the local info variable instead of going through the layer pointer
in zynqmp_disp_layer_update(). This doesn't introduce any functional
change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

To prepare for control of the blender outside of the CRTC code, move the
setup of the blender to the zynqmp_disp_enable() function. This doesn't
introduce any functional change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

To prepare for usage of the clock setup function outside of the CRTC
code, replace the DRM-specific structures passed as parameters with a
pointer to the zynqmp_disp and the requested clock rate. This doesn't
introduce any functional change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

The bus_fmt field of the zynqmp_disp_format structure is unused. Drop
it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

The event field of the zynqmp_disp structure is unused. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Now that the driver uses the connector bridge helper, HPD can be
reported directly for the connector through the drm_bridge_hpd_notify()
function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Replace the manual connector implementation and registration in the DP
encoder with the DRM connector bridge helper. This removes boilerplate
code and simplifies the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

The next component in the display chain, after the DP encoder, is most
likely a DP connector. The display connector driver registers a bridge
for it. That bridge doesn't need to be controlled, but is needed in
order to use the DRM connector bridge helper. Retrieve it at init time,
and attach to it in the DP bridge attach handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

As part of the transitition of the DP encoder to a DRM bridge, turn the
DRM encoder into a dummy encoder and move it out of the DP code, to the
DPSUB core. DP encoder operations are handled by the DP bridge, which is
now attached to the encoder.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Connector creation requires the DRM encoder, and it thus typically
performed in the bridge attach operation. Move it there, to prepare for
registration of the DRM bridge. For now the zynqmp_dp_bridge_attach() is
called manually at initialization time.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

To prepare for the removal of the connector from the DP encoder, pass
the display info pointer to the zynqmp_dp_set_format() function instead
of accessing the connector internally. The display info is NULL when the
function is called at initialization time, as we have no display info at
that point. This doesn't change the existing behaviour, given that the
zynqmp_dp_set_format() was already handling this as a special case (the
display info isn't initialized at init time and is all zeroes).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

The DP encoder is currently modelled as a DRM encoder and DRM connector.
This doesn't support system configurations where the DP encoder is
driven by the FPGA programmable logic, using the live video input to the
DP subsystem. To enable such use cases, we need to model the encoder as
a DRM bridge.

As a first step, create a DRM bridge in the DP encoder driver. Move and
delegate the implementation of the DRM encoder and connector operations
to the bridge to prepare for the transition. The bridge will be
registered with the DRM core as a separate change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

The zynqmp_dp_encoder_mode_set_transfer_unit() function takes a mode
pointer argument that it doesn't need to modify. Make it const.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

To prepare for the transition to the DRM bridge API, switch the encoder
operations to the atomic versions of .enable() and .disable(). This
doesn't cause any functional change by itself.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

The DPSUB doesn't live in isolation, but is connected to the
programmable logic for live inputs and outputs, and also has a
DisplayPort output. Model all those using OF graph.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>

Pull more random number generator updates from Jason Donenfeld:
 "This time with some large scale treewide cleanups.

  The intent of this pull is to clean up the way callers fetch random
  integers. The current rules for doing this right are:

   - If you want a secure or an insecure random u64, use get_random_u64()

   - If you want a secure or an insecure random u32, use get_random_u32()

     The old function prandom_u32() has been deprecated for a while
     now and is just a wrapper around get_random_u32(). Same for
     get_random_int().

   - If you want a secure or an insecure random u16, use get_random_u16()

   - If you want a secure or an insecure random u8, use get_random_u8()

   - If you want secure or insecure random bytes, use get_random_bytes().

     The old function prandom_bytes() has been deprecated for a while
     now and has long been a wrapper around get_random_bytes()

   - If you want a non-uniform random u32, u16, or u8 bounded by a
     certain open interval maximum, use prandom_u32_max()

     I say "non-uniform", because it doesn't do any rejection sampling
     or divisions. Hence, it stays within the prandom_*() namespace, not
     the get_random_*() namespace.

     I'm currently investigating a "uniform" function for 6.2. We'll see
     what comes of that.

  By applying these rules uniformly, we get several benefits:

   - By using prandom_u32_max() with an upper-bound that the compiler
     can prove at compile-time is ≤65536 or ≤256, internally
     get_random_u16() or get_random_u8() is used, which wastes fewer
     batched random bytes, and hence has higher throughput.

   - By using prandom_u32_max() instead of %, when the upper-bound is
     not a constant, division is still avoided, because
     prandom_u32_max() uses a faster multiplication-based trick instead.

   - By using get_random_u16() or get_random_u8() in cases where the
     return value is intended to indeed be a u16 or a u8, we waste fewer
     batched random bytes, and hence have higher throughput.

  This series was originally done by hand while I was on an airplane
  without Internet. Later, Kees and I worked on retroactively figuring
  out what could be done with Coccinelle and what had to be done
  manually, and then we split things up based on that.

  So while this touches a lot of files, the actual amount of code that's
  hand fiddled is comfortably small"

* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  prandom: remove unused functions
  treewide: use get_random_bytes() when possible
  treewide: use get_random_u32() when possible
  treewide: use get_random_{u8,u16}() when possible, part 2
  treewide: use get_random_{u8,u16}() when possible, part 1
  treewide: use prandom_u32_max() when possible, part 2
  treewide: use prandom_u32_max() when possible, part 1

Merge tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:

 - Use BPF CO-RE (Compile Once, Run Everywhere) to support old kernels
   when using bperf (perf BPF based counters) with cgroups.

 - Support HiSilicon PCIe Performance Monitoring Unit (PMU), that
   monitors bandwidth, latency, bus utilization and buffer occupancy.

   Documented in Documentation/admin-guide/perf/hisi-pcie-pmu.rst.

 - User space tasks can migrate between CPUs, so when tracing selected
   CPUs, system-wide sideband is still needed, fix it in the setup of
   Intel PT on hybrid systems.

 - Fix metricgroups title message in 'perf list', it should state that
   the metrics groups are to be used with the '-M' option, not '-e'.

 - Sync the msr-index.h copy with the kernel sources, adding support for
   using "AMD64_TSC_RATIO" in filter expressions in 'perf trace' as well
   as decoding it when printing the MSR tracepoint arguments.

 - Fix program header size and alignment when generating a JIT ELF in
   'perf inject'.

 - Add multiple new Intel PT 'perf test' entries, including a jitdump
   one.

 - Fix the 'perf test' entries for 'perf stat' CSV and JSON output when
   running on PowerPC due to an invalid topology number in that arch.

 - Fix the 'perf test' for arm_coresight failures on the ARM Juno
   system.

 - Fix the 'perf test' attr entry for PERF_FORMAT_LOST, adding this
   option to the or expression expected in the intercepted
   perf_event_open() syscall.

 - Add missing condition flags ('hs', 'lo', 'vc', 'vs') for arm64 in the
   'perf annotate' asm parser.

 - Fix 'perf mem record -C' option processing, it was being chopped up
   when preparing the underlying 'perf record -e mem-events' and thus
   being ignored, requiring using '-- -C CPUs' as a workaround.

 - Improvements and tidy ups for 'perf test' shell infra.

 - Fix Intel PT information printing segfault in uClibc, where a NULL
   format was being passed to fprintf.

* tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits)
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet
  perf auxtrace arm64: Add support for HiSilicon PCIe Tune and Trace device driver
  perf auxtrace arm: Refactor event list iteration in auxtrace_record__init()
  perf tests stat+json_output: Include sanity check for topology
  perf tests stat+csv_output: Include sanity check for topology
  perf intel-pt: Fix system_wide dummy event for hybrid
  perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc
  perf test: Fix attr tests for PERF_FORMAT_LOST
  perf test: test_intel_pt.sh: Add 9 tests
  perf inject: Fix GEN_ELF_TEXT_OFFSET for jit
  perf test: test_intel_pt.sh: Add jitdump test
  perf test: test_intel_pt.sh: Tidy some alignment
  perf test: test_intel_pt.sh: Print a message when skipping kernel tracing
  perf test: test_intel_pt.sh: Tidy some perf record options
  perf test: test_intel_pt.sh: Fix return checking again
  perf: Skip and warn on unknown format 'configN' attrs
  perf list: Fix metricgroups title message
  perf mem: Fix -C option behavior for perf mem record
  perf annotate: Add missing condition flags for arm64
  ...