Add a helper function to check if only D0i3-compatible streams
are active.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-7-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The DSP device substates such as D0I0/D0I3
are platform-specific. Therefore, the d0_substate
field of struct snd_sof_dev is replaced
with the dsp_power_state field which represents the current
state of the DSP. This field holds both the device state
and the platform-specific substate values.

With the DSP device substates being platform-specific,
the DSP power state transitions need to be performed in
the platform-specific suspend/resume ops as well.

In order to achieve this, the ops signature has to be
modified to pass the target device state as an
argument. The target substate will be determined by
the platform-specific ops before performing the transition.
For example, in the case of the system suspending to S0IX,
the top-level SOF device suspend callback needs to
only determine if the DSP will be entering
D3 or remain in D0. The target substate in case the device
needs to remain in D0 (D0I0 or D0I3) will be determined
by the platform-specific suspend op.

With the addition of the extended set of power states for the DSP,
the set_power_state op for HDA platforms has to be extended
to handle only the appropriate state transitions. So, the
implementation for the Intel HDA platforms is also modified.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-6-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add a new enum sof_dsp_power_states for all the possible
the DSP device states. The SOF driver currently handles
only the D0 and D3 states and support for other states
will be added later as needed.

Also, add a helper to determine the target DSP power state
based on the system suspend target.
The snd_sof_dsp_d0i3_on_suspend() function is renamed to
snd_sof_stream_suspend_ignored() to be more indicative
of what it does and it used to determine the target
DSP state during system suspend.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-5-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add the system_suspend_target field to struct snd_sof_dev
to track the intended system suspend power target. This will
be used as one of the criteria for determining the
final DSP power state.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-4-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Unify the suspend/resume routines for both the D0I3/D3
DSP targets in sof_suspend()/sof_resume().
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-3-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Setting the prepared flag to false marks the streams for the
hw_params to be reset upon resuming. In the case of
the D0i3-compatible streams that ignored suspend to
keep the pipeline active in the DSP during suspend,
this should not be done.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-2-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

1.
Provides a callback (i.e. mtk_hdmi_audio_hook_plugged_cb) to hdmi-codec.
When ASoC machine driver calls hdmi_codec_set_jack_detect(), the
callback will be invoked to save plugged_cb and codec_dev parameters.

+---------+  set_jack_  +------------+ plugged_cb  +----------+
| machine | ----------> | hdmi-codec | ----------> | mtk-hdmi |
+---------+  detect()   +------------+ codec_dev   +----------+

2.
When there is any jack status changes, mtk-hdmi will call the
plugged_cb() to notify hdmi-codec.  And then hdmi-codec will call
snd_soc_jack_report().

+----------+ plugged_cb  +------------+
| mtk-hdmi | ----------> | hdmi-codec | -> snd_soc_jack_report()
+----------+ codec_dev   +------------+
             connector_status
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200206102509.2.I230fd59de28e73934a91cb01424e25b9e84727f4@changeidSigned-off-by: Mark Brown <broonie@kernel.org>

Exits earlier if register_audio_driver() returns errors.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Link: https://lore.kernel.org/r/20200206102509.1.Ieba8d422486264eb7aaa3aa257620a1b0c74c6db@changeidSigned-off-by: Mark Brown <broonie@kernel.org>

The assignment to ret is redundant as it is not used in the error
return path and hence can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200210092423.327499-1-colin.king@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

sound/soc/codecs/wcd934x.c: In function wcd934x_codec_hphdelay_lutbypass:
sound/soc/codecs/wcd934x.c:3395:6: warning: variable hph_comp_ctrl7 set but not used [-Wunused-but-set-variable]

commit da3e83f8 ("ASoC: wcd934x: add audio routings")
involved this unused variable.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200210150421.34680-1-yuehaibing@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Uses hdmi-codec to support HDMI jack reporting.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200206102509.3.I253f51edff62df1d88005de12ba601aa029b1e99@changeidSigned-off-by: Mark Brown <broonie@kernel.org>

k3 devices including am654 and j721e are using UDMA
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200210140950.11090-3-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Platform driver glue for platforms using UDMA (am654 and j721e).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200210140950.11090-2-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Currently SND_SOC_ALL_CODECS selects the config symbols for all codec
drivers.  As "select" bypasses dependencies, lots of "select" statements
need explicit dependencies, which are hard to get right, and hard to
maintain[*].

Fix this by using "imply" instead, which is a weak version of "select",
and which obeys dependencies of target symbols.

Add dependencies to invisible symbols that are currently selected only
if their dependencies are fulfilled.

[*] See e.g. commit 13426fea ("ASoC: wcd934x: Add missing
    COMMON_CLK dependency to SND_SOC_ALL_CODECS").
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20200207091351.18133-1-geert@linux-m68k.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add SOF device and DT descriptors for i.MX8QM platform.
Signed-off-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200210095817.13226-4-daniel.baluta@oss.nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

i.MX8QM and i.MX8QXP are mostly identical platforms with minor hardware
differences. One of these differences affects the firmware boot process,
requiring the run operation to differ. All other ops are reused.
Signed-off-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200210095817.13226-3-daniel.baluta@oss.nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

i.MX8 and i.MX8X platforms are very similar and were treated the same.
Anyhow, we need to account for the differences somehow.

Current supported platform is i.MX8QXP which is from i.MX8X family.
Rename i.MX8 platform to i.MX8X to prepare for future i.MX8 platforms.
Signed-off-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200210095817.13226-2-daniel.baluta@oss.nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

m68k/allmodconfig:

    WARNING: unmet direct dependencies detected for SPI_PXA2XX
      Depends on [n]: SPI [=y] && SPI_MASTER [=y] && (ARCH_PXA || ARCH_MMP || PCI [=n] || ACPI)
      Selected by [m]:
      - SND_SOC_INTEL_BDW_RT5677_MACH [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && SND_SOC_INTEL_MACH [=y] && (SND_SOC_INTEL_HASWELL [=n] || SND_SOC_SOF_BROADWELL [=m]) && I2C [=m] && (I2C_DESIGNWARE_PLATFORM [=m] || COMPILE_TEST [=y]) && (GPIOLIB [=y] || COMPILE_TEST [=y]) && (X86_INTEL_LPSS || COMPILE_TEST [=y]) && SPI_MASTER [=y]

This happens because SND_SOC_INTEL_BDW_RT5677_MACH selects SPI_PXA2XX,
and the former depends on COMPILE_TEST, while the latter does not.

Fix this by enabling compile-testing for SPI_PXA2XX.

Fixes: 630db154 ("ASoC: Intel: bdw-rt5677: fix Kconfig dependencies")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200210093027.6672-1-geert@linux-m68k.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Variable idx is being assigned with a value that is never idx, it is
assigned a new value a couple of statements later. The assignment is
redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200208221529.37105-1-colin.king@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

Currently function sst_platform_get_resources always returns zero and
error return codes set by the function are never returned. Fix this
by returning the error return code in variable ret rather than the
hard coded zero.

Addresses-Coverity: ("Unused value")
Fixes: f533a035 ("ASoC: Intel: mrfld - create separate module for pci part")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200208220720.36657-1-colin.king@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

Do not print an error trace when deferring probe for I2S driver.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200203100814.22944-7-olivier.moysan@st.comSigned-off-by: Mark Brown <broonie@kernel.org>

Do not print an error trace when deferring probe for SPDIFRX driver.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200203100814.22944-6-olivier.moysan@st.comSigned-off-by: Mark Brown <broonie@kernel.org>

Do not print an error trace when deferring probe for SAI driver.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200203100814.22944-5-olivier.moysan@st.comSigned-off-by: Mark Brown <broonie@kernel.org>

Return an error when the i2s driver fails to get a reset controller.
Also add an error trace, except on probe defer status.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200203100814.22944-4-olivier.moysan@st.comSigned-off-by: Mark Brown <broonie@kernel.org>

Return an error when the SPDIFRX driver fails to get a reset controller.
Also add an error trace, except on probe defer status.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200203100814.22944-3-olivier.moysan@st.comSigned-off-by: Mark Brown <broonie@kernel.org>

Return an error when the SAI driver fails to get a reset controller.
Also add an error trace, except on probe defer status.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200203100814.22944-2-olivier.moysan@st.comSigned-off-by: Mark Brown <broonie@kernel.org>

The field "is_sdw" is used for distinguishing the driver whether is run
in soundwire mode or not. That will run the separated setting in runtime
to make sure the driver can be run with the same build between i2s mode
and soundwire mode.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/980b97e1ab9c4fab8bd345ec2158f1fd@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

1. Increases the max limit of PLL input frequency
   on RL6231 shared support.
2. Add a new pll preset map.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/1580970133-14089-1-git-send-email-derek.fang@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Clang warns:

../sound/soc/codecs/wcd934x.c:1886:11: warning: address of array
'wcd->rx_chs' will always evaluate to 'true' [-Wpointer-bool-conversion]
        if (wcd->rx_chs) {
        ~~  ~~~~~^~~~~~
../sound/soc/codecs/wcd934x.c:1894:11: warning: address of array
'wcd->tx_chs' will always evaluate to 'true' [-Wpointer-bool-conversion]
        if (wcd->tx_chs) {
        ~~  ~~~~~^~~~~~
2 warnings generated.

Arrays that are in the middle of a struct are never NULL so they don't
need a check like this.

Fixes: a61f3b4f ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Link: https://github.com/ClangBuiltLinux/linux/issues/854Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20200204060143.23393-1-natechancellor@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove including <linux/version.h> that don't need it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200202073917.195880-1-yuehaibing@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support for Cherrytrail boards, using the pcm512x audio codec
using the new sof_pcm512x machine driver.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129223603.2569-4-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Switch over Broxton platforms with the pcm512x codec from the legacy
bxt-pcm512x to the new sof_pcm512x machine driver.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200129223603.2569-3-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support for multiple platforms, e.g. Apollolake based, using the
pcm512x audio codec.

The SOF developers and CI rely on the Up^2 and Hifiberry DAC+ boards
based on this codec for tests.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129223603.2569-2-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Support setting bclk ratio from machine drivers.
Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200125162917.247485-1-yuhsuan@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Pull more Kbuild updates from Masahiro Yamada:

 - fix randconfig to generate a sane .config

 - rename hostprogs-y / always to hostprogs / always-y, which are more
   natual syntax.

 - optimize scripts/kallsyms

 - fix yes2modconfig and mod2yesconfig

 - make multiple directory targets ('make foo/ bar/') work

* tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: make multiple directory targets work
  kconfig: Invalidate all symbols after changing to y or m.
  kallsyms: fix type of kallsyms_token_table[]
  scripts/kallsyms: change table to store (strcut sym_entry *)
  scripts/kallsyms: rename local variables in read_symbol()
  kbuild: rename hostprogs-y/always to hostprogs/always-y
  kbuild: fix the document to use extra-y for vmlinux.lds
  kconfig: fix broken dependency in randconfig-generated .config

Pull new zonefs file system from Damien Le Moal:
 "Zonefs is a very simple file system exposing each zone of a zoned
  block device as a file.

  Unlike a regular file system with native zoned block device support
  (e.g. f2fs or the on-going btrfs effort), zonefs does not hide the
  sequential write constraint of zoned block devices to the user. As a
  result, zonefs is not a POSIX compliant file system. Its goal is to
  simplify the implementation of zoned block devices support in
  applications by replacing raw block device file accesses with a richer
  file based API, avoiding relying on direct block device file ioctls
  which may be more obscure to developers.

  One example of this approach is the implementation of LSM
  (log-structured merge) tree structures (such as used in RocksDB and
  LevelDB) on zoned block devices by allowing SSTables to be stored in a
  zone file similarly to a regular file system rather than as a range of
  sectors of a zoned device. The introduction of the higher level
  construct "one file is one zone" can help reducing the amount of
  changes needed in the application while at the same time allowing the
  use of zoned block devices with various programming languages other
  than C.

  Zonefs IO management implementation uses the new iomap generic code.
  Zonefs has been successfully tested using a functional test suite
  (available with zonefs userland format tool on github) and a prototype
  implementation of LevelDB on top of zonefs"

* tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: Add documentation
  fs: New zonefs file system

In order to allow the GICv4 code to link properly on 32bit ARM,
make sure we don't use 64bit divisions when it isn't strictly
necessary.

Fixes: 4e6437f1 ("irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull cifs fixes from Steve French:
 "13 cifs/smb3 patches, most from testing at the SMB3 plugfest this week:

   - Important fix for multichannel and for modefromsid mounts.

   - Two reconnect fixes

   - Addition of SMB3 change notify support

   - Backup tools fix

   - A few additional minor debug improvements (tracepoints and
     additional logging found useful during testing this week)"

* tag '5.6-rc-smb3-plugfest-patches' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: Add defines for new information level, FileIdInformation
  smb3: print warning once if posix context returned on open
  smb3: add one more dynamic tracepoint missing from strict fsync path
  cifs: fix mode bits from dir listing when mounted with modefromsid
  cifs: fix channel signing
  cifs: add SMB3 change notification support
  cifs: make multichannel warning more visible
  cifs: fix soft mounts hanging in the reconnect code
  cifs: Add tracepoints for errors on flush or fsync
  cifs: log warning message (once) if out of disk space
  cifs: fail i/o on soft mounts if sessionsetup errors out
  smb3: fix problem with null cifs super block with previous patch
  SMB3: Backup intent flag missing from some more ops

Pull vboxfs from Al Viro:
 "This is the VirtualBox guest shared folder support by Hans de Goede,
  with fixups for fs_parse folded in to avoid bisection hazards from
  those API changes..."

* 'work.vboxsf' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: Add VirtualBox guest shared folder (vboxsf) support