- 10 Aug, 2014 3 commits
-
-
Gabriele Mazzotta authored
If nid 0x15 (Headphone Playback Switch) is in D3 and headphones are plugged in when the laptop reboots, a pop noise is generated. Prevent this by keeping nid 0x15 in D0 when headphones are plugged in. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=76611Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Gabriele Mazzotta authored
If the laptop is powered on with a jack plugged in, independently on what is plugged, the jack is treated as a microphone jack. Initialize the capture source so that by default jacks are treated as headphones jacks. This will also prevent pop noises on boot in case headphones are plugged in since setting/unsetting mic-in as input source causes a pop noise. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=76611Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Clemens Ladisch authored
The BOSS ME-25 turns out not to have any useful descriptors in its MIDI interface, so its needs a quirk entry after all. Reported-and-tested-by: Kees van Veen <kees.vanveen@gmail.com> Fixes: 8e5ced83 ("ALSA: usb-audio: remove superfluous Roland quirks") Cc: <stable@vger.kernel.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 07 Aug, 2014 3 commits
-
-
Takashi Iwai authored
CMI8888 codec chip has a boost amp (only) on the headphone pin, and this confuses the generic parser, which tends to pick up the most outside amp. This results in the wrong volume setup, as the driver complains like: hda_codec: Mismatching dB step for vmaster slave (-100!=1000) For avoiding this problem, rule out the amp on NID 0x10 and create "Headphone Amp" volume control manually instead. Note that this patch still doesn't fix all problems yet. The sound output from the line out seems still too low. It will be fixed in another patch (hopefully). Reported-and-tested-by: Vincent Lejeune <vljn@ovi.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
ASUS Phoebus with CMI8888 HD-audio chip (PCI id 13f6:5011) doesn't work with HD-audio driver as is because of some weird nature. For making DMA properly working, we need to disable MSI. The position report buffer doesn't work, thus we need to force reading LPIB instead. And yet, the codec CORB/RIRB communication gives errors unless we disable the snooping (caching). In this patch, all these workarounds are added as a quirk for the device. The HD-audio *codec* chip needs yet another workaround, but it'll be provided in the succeeding patch. Reported-and-tested-by: Vincent Lejeune <vljn@ovi.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Kailang Yang authored
It will be recording voice delay for resume back recording for Headset Mic. This alc286 will quickly open Headset Mic, to prevent avoid recording files are missing. The issue was fixed. This is follow ALC286 programing guide. [fix build error, add static and renamed the function by tiwai] Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 06 Aug, 2014 2 commits
-
-
Himangi Saraogi authored
The Linux kernel coding style guidelines suggest not using typedefs for structure types. This patch gets rid of the typedefs for wanc_info and wavnc_port_info. A simplified version of the Coccinelle semantic patch that finds the case is: @tn@ identifier i; type td; @@ -typedef struct i { ... } -td ; @@ type tn.td; identifier tn.i; @@ -td + struct i Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Himangi Saraogi authored
The Linux kernel coding style guidelines suggest not using typedefs for structure types. This patch gets rid of the typedef for uart401_devc. The following Coccinelle semantic patch detects the case. @tn@ identifier i; type td; @@ -typedef struct i { ... } -td ; @@ type tn.td; identifier tn.i; @@ -td + struct i Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 05 Aug, 2014 5 commits
-
-
Adam Goode authored
Signed-off-by: Adam Goode <agoode@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Adam Goode authored
sound/usb/card.c registers USB suspend and resume but did not previously kill the input URBs. This means that USB MIDI devices left open across suspend/resume had non-functional input (output still usually worked, but it looks like that is another issue). Before this change, we would get ESHUTDOWN for each of the input URBs at suspend time, killing input. Signed-off-by: Adam Goode <agoode@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Himangi Saraogi authored
The Linux kernel coding style guidelines suggest not using typedefs for structure types. This patch gets rid of the typedefs for pss_mixerdata and pss_confdata. The following Coccinelle semantic patch is used to make the change. @tn@ identifier i; type td; @@ -typedef struct i { ... } -td ; @@ type tn.td; identifier tn.i; @@ -td + struct i Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Himangi Saraogi authored
This typedef is unnecessary and should just be removed as they are never used. The following Coccinelle semantic patch detects the case. @tn@ identifier i; type td; @@ -typedef struct i { ... } -td ; @@ type tn.td; identifier tn.i; @@ -td + struct i Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
Use %d for loop counter and %X for device capabilities. This is a supplemental patch for Hans Wennborg's patch. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 04 Aug, 2014 27 commits
-
-
Takashi Iwai authored
Merge tag 'asoc-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v3.17 This has been a pretty exciting release in terms of the framework, we've finally got support for multiple CODECs attached to a single DAI link which has been something there's been interest in as long as I've been working on ASoC. A big thanks to Benoit and Misael for their work on this. Otherwise it's been a fairly standard release for development, including more componentisation work from Lars-Peter and a good selection of both CODEC and CPU drivers. - Support for multiple CODECs attached to a single DAI, enabling systems with for example multiple DAC/speaker drivers on a single link, contributed by Benoit Cousson based on work from Misael Lopez Cruz. - Support for byte controls larger than 256 bytes based on the use of TLVs contributed by Omair Mohammed Abdullah. - More componentisation work from Lars-Peter Clausen. - The remainder of the conversions of CODEC drivers to params_width() - Drivers for Cirrus Logic CS4265, Freescale i.MX ASRC blocks, Realtek RT286 and RT5670, Rockchip RK3xxx I2S controllers and Texas Instruments TAS2552. - Lots of updates and fixes, especially to the DaVinci, Intel, Freescale, Realtek, and rcar drivers.
-
Mark Brown authored
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/tlv320aic3x', 'asoc/topic/width', 'asoc/topic/wm0010', 'asoc/topic/wm8904' and 'asoc/topic/wm8962' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/tlv', 'asoc/topic/tlv320aic23', 'asoc/topic/tlv320aic31xx' and 'asoc/topic/tlv320aic32x4' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/sigmadsp', 'asoc/topic/sirf', 'asoc/topic/spdif', 'asoc/topic/tas2552' and 'asoc/topic/tas5086' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/rt5670', 'asoc/topic/rt5677', 'asoc/topic/s6000', 'asoc/topic/samsung' and 'asoc/topic/sh-fsi' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/rl6231', 'asoc/topic/rockchip', 'asoc/topic/rt286', 'asoc/topic/rt5640' and 'asoc/topic/rt5645' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/omap', 'asoc/topic/oom' and 'asoc/topic/pxa' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/intel', 'asoc/topic/kirkwood', 'asoc/topic/max98090' and 'asoc/topic/mc13783' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/fsl', 'asoc/topic/fsl-asrc', 'asoc/topic/fsl-spdif' and 'asoc/topic/imx-audmux' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/cs4265', 'asoc/topic/cs42l56', 'asoc/topic/cs42xx8', 'asoc/topic/cx20442' and 'asoc/topic/davinci' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/atmel', 'asoc/topic/cirrus' and 'asoc/topic/cleanup' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/adau1977', 'asoc/topic/ak4642', 'asoc/topic/ak5386' and 'asoc/topic/arizona' into asoc-next
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
ASoC: Fixes for v3.16 A bigger batch of changes than I would like as I didn't send any for a few weeks without noticing how many had built up. They are almost all driver specific though, larger changes are: - Fixes to the newly added Baytrail/MAX98090 which look like some QA was missed on the microphone detection. - Deletion of some erroniously listed audio formats for Haswell. - Fix debugfs creation in the core so that we don't try to generate multiple directories with the same name, relatively large textually but simple to inspect by eye and test. - A couple of bugfixes for the rcar driver one of which which involves a bit of code motion to move initailisation of some hardware out of common paths into device specific ones. - Ensure both channels are powered up for mono outputs on Arizona devices, involving some simple data tables listing the outputs and a loop over them. - A couple of fixes to save and restore information on suspended and idle Samsung I2S controllers. # gpg: Signature made Tue 22 Jul 2014 00:52:53 BST using RSA key ID 7EA229BD # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
-
Mark Brown authored
ASoC: Fixes for v3.16 Quite a few build coverage fixes in here among the usual small driver fixes includling the sigmadsp change from Lars - moving the driver to separate modules per bus (which is basically just code motion) avoids issues with some combinations of buses being enabled. # gpg: Signature made Thu 19 Jun 2014 11:57:31 BST using RSA key ID 7EA229BD # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
-
Mark Brown authored
Since we pass the port number through file private data for debugfs we cast it to and from a pointer so use uintptr_t in order to ensure that the types are compatible, avoiding warnings on 64 bit platforms where pointers are 64 bit and unsigned integers 32 bit. Signed-off-by: Mark Brown <broonie@linaro.org>
-
Peter Ujfalusi authored
In order to be able to use simple-card with McASP on TI SoC based boards we need to be able to select the McASP via menuconfig. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Nicolin Chen authored
sound/soc/fsl/fsl_asrc.c:250 fsl_asrc_config_pair() warn: variable dereferenced before check 'config' (see line 243) git remote add next git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git git remote update next git checkout 3117bb31 vim +/config +250 sound/soc/fsl/fsl_asrc.c 237 */ 238 static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair) 239 { 240 struct asrc_config *config = pair->config; 241 struct fsl_asrc *asrc_priv = pair->asrc_priv; 242 enum asrc_pair_index index = pair->index; @243 u32 inrate = config->input_sample_rate, indiv; 244 u32 outrate = config->output_sample_rate, outdiv; 245 bool ideal = config->inclk == INCLK_NONE; 246 u32 clk_index[2], div[2]; 247 int in, out, channels; 248 struct clk *clk; 249 @250 if (!config) { 251 pair_err("invalid pair config\n"); 252 return -EINVAL; 253 } Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-
Nicolin Chen authored
The patch 3117bb31: "ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers" from Jul 29, 2014, leads to the following Smatch complaint: sound/soc/fsl/fsl_asrc_dma.c:304 fsl_asrc_dma_shutdown() warn: variable dereferenced before check 'pair' (see line 302) sound/soc/fsl/fsl_asrc_dma.c 301 struct fsl_asrc_pair *pair = runtime->private_data; 302 struct fsl_asrc *asrc_priv = pair->asrc_priv; ^^^^^^^^^^^^^^^ Dereference. 303 304 if (pair && asrc_priv->pair[pair->index] == pair) ^^^^ Check. 305 asrc_priv->pair[pair->index] = NULL; 306 So we just let the driver check pair before using it. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
-