- 11 Feb, 2021 6 commits
-
-
Michael Ellerman authored
Currently unsafe_put_user() expands to __put_user_goto(), which expands to __put_user_nocheck_goto(). There are no other uses of __put_user_nocheck_goto(), and although there are some other uses of __put_user_goto() those could just use unsafe_put_user(). Every layer of indirection introduces the possibility that some code is calling that layer, and makes keeping track of the required semantics at each point more complicated. So drop __put_user_goto(), and rename __put_user_nocheck_goto() to __unsafe_put_user_goto(). The "nocheck" is implied by "unsafe". Replace the few uses of __put_user_goto() with unsafe_put_user(). Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210208135717.2618798-1-mpe@ellerman.id.au
-
Michael Ellerman authored
It's only used in setup.c, so make it static. Fixes: 053d58c8 ("powerpc/amigaone: Move PHB discovery") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Michael Ellerman authored
As reported by lkp: arch/powerpc/mm/book3s64/radix_tlb.c:646:6: warning: no previous prototype for function 'exit_lazy_flush_tlb' Fix it by moving the prototype into the existing header. Fixes: 032b7f08 ("powerpc/64s/radix: serialize_against_pte_lookup IPIs trim mm_cpumask") Reported-by:
-
Michael Ellerman authored
As reported by lkp: arch/powerpc/platforms/83xx/km83xx.c:183:19: error: 'mpc83xx_setup_pci' undeclared here (not in a function) 183 | .discover_phbs = mpc83xx_setup_pci, | ^~~~~~~~~~~~~~~~~ | mpc83xx_setup_arch There is a stub defined for the CONFIG_PCI=n case, but now that mpc83xx_setup_pci() is being assigned to discover_phbs the correct empty value is NULL. Fixes: 83f84041 ("powerpc/83xx: Move PHB discovery") Reported-by: -
Nicholas Piggin authored
The allyesconfig ppc64 kernel fails to link with relocations unable to fit after commit 3a96570f ("powerpc: convert interrupt handlers to use wrappers"), which is due to the interrupt handler functions being put into the .noinstr.text section, which the linker script places on the opposite side of the main .text section from the interrupt entry asm code which calls the handlers. This results in a lot of linker stubs that overwhelm the 252-byte sized space we allow for them, or in the case of BE a .opd relocation link error for some reason. It's not required to put interrupt handlers in the .noinstr section, previously they used NOKPROBE_SYMBOL, so take them out and replace with a NOKPROBE_SYMBOL in the wrapper macro. Remove the explicit NOKPROBE_SYMBOL macros in the interrupt handler functions. This makes a number of interrupt handlers nokprobe that were not prior to the interrupt wrappers commit, but since that commit they were made nokprobe due to being in .noinstr.text, so this fix does not change that. The fixes tag is different to the commit that first exposes the problem because it is where the wrapper macros were introduced. Fixes: 8d41fc61 ("powerpc: interrupt handler wrapper functions") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> [mpe: Slightly fix up comment wording] Signed-off-by:
-
Michael Ellerman authored
As part of commit fbbefb32 ("powerpc/pci: Move PHB discovery for PCI_DN using platforms"), I switched some allocations from memblock_alloc() to kmalloc(), otherwise memblock would warn that it was being called after slab init. However I missed that the code relied on the allocations being zeroed, without which we could end up crashing: pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff BUG: Unable to handle kernel data access on read at 0x6b6b6b6b6b6b6af7 Faulting instruction address: 0xc0000000000dbc90 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA PowerNV ... NIP pnv_ioda_get_pe_state+0xe0/0x1d0 LR pnv_ioda_get_pe_state+0xb4/0x1d0 Call Trace: pnv_ioda_get_pe_state+0xb4/0x1d0 (unreliable) pnv_pci_config_check_eeh.isra.9+0x78/0x270 pnv_pci_read_config+0xf8/0x160 pci_bus_read_config_dword+0xa4/0x120 pci_bus_generic_read_dev_vendor_id+0x54/0x270 pci_scan_single_device+0xb8/0x140 pci_scan_slot+0x80/0x1b0 pci_scan_child_bus_extend+0x94/0x490 pcibios_scan_phb+0x1f8/0x3c0 pcibios_init+0x8c/0x12c do_one_initcall+0x94/0x510 kernel_init_freeable+0x35c/0x3fc kernel_init+0x2c/0x168 ret_from_kernel_thread+0x5c/0x70 Switch them to kzalloc(). Fixes: fbbefb32 ("powerpc/pci: Move PHB discovery for PCI_DN using platforms") Signed-off-by:
-
- 08 Feb, 2021 34 commits
-
-
Michael Ellerman authored
There's a short window during boot where although the kernel is running little endian, any exceptions will cause the CPU to switch back to big endian. This situation persists until we call configure_exceptions(), which calls either the hypervisor or OPAL to configure the CPU so that exceptions will be taken in little endian (via HID0[HILE]). We don't intend to take exceptions during early boot, but one way we sometimes do is via a WARN/BUG etc. Those all boil down to a trap instruction, which will cause a program check exception. The first instruction of the program check handler is an mtsprg, which when executed in the wrong endian is an lhzu with a ~3GB displacement from r3. The content of r3 is random, so that becomes a load from some random location, and depending on the system (installed RAM etc.) can easily lead to a checkstop, or an infinitely recursive page fault. That prevents whatever the WARN/BUG was complaining about being printed to the console, and the user just sees a dead system. We can fix it by having a trampoline at the beginning of the program check handler that detects we are in the wrong endian, and flips us back to the correct endian. We can't flip MSR[LE] using mtmsr (alas), so we have to use rfid. That requires backing up SRR0/1 as well as a GPR. To do that we use SPRG0/2/3 (SPRG1 is already used for the paca). SPRG3 is user readable, but this trampoline is only active very early in boot, and SPRG3 will be reinitialised in vdso_getcpu_init() before userspace starts. With this trampoline in place we can survive a WARN early in boot and print a stack trace, which is eventually printed to the console once the console is up, eg: [83565.758545] kexec_core: Starting new kernel [ 0.000000] ------------[ cut here ]------------ [ 0.000000] static_key_enable_cpuslocked(): static key '0xc000000000ea6160' used before call to jump_label_init() [ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/jump_label.c:166 static_key_enable_cpuslocked+0xfc/0x120 [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.0-gcc-8.2.0-dirty #618 [ 0.000000] NIP: c0000000002fd46c LR: c0000000002fd468 CTR: c000000000170660 [ 0.000000] REGS: c000000001227940 TRAP: 0700 Not tainted (5.10.0-gcc-8.2.0-dirty) [ 0.000000] MSR: 9000000002823003 <SF,HV,VEC,VSX,FP,ME,RI,LE> CR: 24882422 XER: 20040000 [ 0.000000] CFAR: 0000000000000730 IRQMASK: 1 [ 0.000000] GPR00: c0000000002fd468 c000000001227bd0 c000000001228300 0000000000000065 [ 0.000000] GPR04: 0000000000000001 0000000000000065 c0000000010cf970 000000000000000d [ 0.000000] GPR08: 0000000000000000 0000000000000000 0000000000000000 c00000000122763f [ 0.000000] GPR12: 0000000000002000 c000000000f8a980 0000000000000000 0000000000000000 [ 0.000000] GPR16: 0000000000000000 0000000000000000 c000000000f88c8e c000000000f88c9a [ 0.000000] GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 0.000000] GPR24: 0000000000000000 c000000000dea3a8 0000000000000000 c000000000f35114 [ 0.000000] GPR28: 0000002800000000 c000000000f88c9a c000000000f88c8e c000000000ea6160 [ 0.000000] NIP [c0000000002fd46c] static_key_enable_cpuslocked+0xfc/0x120 [ 0.000000] LR [c0000000002fd468] static_key_enable_cpuslocked+0xf8/0x120 [ 0.000000] Call Trace: [ 0.000000] [c000000001227bd0] [c0000000002fd468] static_key_enable_cpuslocked+0xf8/0x120 (unreliable) [ 0.000000] [c000000001227c40] [c0000000002fd4c0] static_key_enable+0x30/0x50 [ 0.000000] [c000000001227c70] [c000000000f6629c] early_page_poison_param+0x58/0x9c [ 0.000000] [c000000001227cb0] [c000000000f351b8] do_early_param+0xa4/0x10c [ 0.000000] [c000000001227d30] [c00000000011e020] parse_args+0x270/0x5e0 [ 0.000000] [c000000001227e20] [c000000000f35864] parse_early_options+0x48/0x5c [ 0.000000] [c000000001227e40] [c000000000f358d0] parse_early_param+0x58/0x84 [ 0.000000] [c000000001227e70] [c000000000f3a368] early_init_devtree+0xc4/0x490 [ 0.000000] [c000000001227f10] [c000000000f3bca0] early_setup+0xc8/0x1c8 [ 0.000000] [c000000001227f90] [000000000000c320] 0xc320 [ 0.000000] Instruction dump: [ 0.000000] 4bfffddd 7c2004ac 39200001 913f0000 4bffffb8 7c651b78 3c82ffac 3c62ffc0 [ 0.000000] 38841b00 3863f310 4bdf03a5 60000000 <0fe00000> 4bffff38 60000000 60000000 [ 0.000000] random: get_random_bytes called from print_oops_end_marker+0x40/0x80 with crng_init=0 [ 0.000000] ---[ end trace 0000000000000000 ]--- [ 0.000000] dt-cpu-ftrs: setup for ISA 3000 Signed-off-by:
-
Michael Ellerman authored
If we try to stack trace very early during boot, either due to a WARN/BUG or manual dump_stack(), we will oops in valid_emergency_stack() when we try to dereference the paca_ptrs array. The fix is simple, we just return false if paca_ptrs isn't allocated yet. The stack pointer definitely isn't part of any emergency stack because we haven't allocated any yet. Signed-off-by:
-
Christopher M. Riedl authored
The idle entry/exit code saves/restores GPRs in the stack "red zone" (Protected Zone according to PowerPC64 ELF ABI v2). However, the offset used for the first GPR is incorrect and overwrites the back chain - the Protected Zone actually starts below the current SP. In practice this is probably not an issue, but it's still incorrect so fix it. Also expand the comments to explain why using the stack "red zone" instead of creating a new stackframe is appropriate here. Signed-off-by:
Christopher M. Riedl <cmr@codefail.de> Signed-off-by:
-
Christophe Leroy authored
On the same way as we did in wrtee(), add an alternative using mtsr/mfsr instructions instead of mtsrin/mfsrin when the segment register can be determined at compile time. Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
Christophe Leroy authored
Function names should tell what the function does, not how. mfsrin() and mtsrin() are read/writing segment registers. They are called that way because they are using mfsrin and mtsrin instructions, but it doesn't matter for the caller. In preparation of following patch, change their name to mfsr() and mtsr() in order to make it obvious they manipulate segment registers without messing up with how they do it. Signed-off-by:
-
Christophe Leroy authored
mfsrin() is a macro. Change in into an inline function to avoid conflicts in KVM and make it more evolutive. Signed-off-by:
-
Christophe Leroy authored
barrier_nospec() in uaccess helpers is there to protect against speculative accesses around access_ok(). When using user_access_begin() sequences together with unsafe_get_user() like macros, barrier_nospec() is called for every single read although we know the access_ok() is done onece. Since all user accesses must be granted by a call to either allow_read_from_user() or allow_read_write_user() which will always happen after the access_ok() check, move the barrier_nospec() there. Reported-by:
-
Sandipan Das authored
Commit 8813ff49 ("powerpc/sstep: Check instruction validity against ISA version before emulation") introduced a proper way to skip unknown instructions. This makes sure that the same is used for the darn instruction when the range selection bits have a reserved value. Fixes: a23987ef ("powerpc: sstep: Add support for darn instruction") Signed-off-by:
Sandipan Das <sandipan@linux.ibm.com> Signed-off-by:
-
Sandipan Das authored
The Power ISA says that the fixed-point load and update instructions must neither use R0 for the base address (RA) nor have the destination (RT) and the base address (RA) as the same register. Similarly, for fixed-point stores and floating-point loads and stores, the instruction is invalid when R0 is used as the base address (RA). This is applicable to the following instructions. * Load Byte and Zero with Update (lbzu) * Load Byte and Zero with Update Indexed (lbzux) * Load Halfword and Zero with Update (lhzu) * Load Halfword and Zero with Update Indexed (lhzux) * Load Halfword Algebraic with Update (lhau) * Load Halfword Algebraic with Update Indexed (lhaux) * Load Word and Zero with Update (lwzu) * Load Word and Zero with Update Indexed (lwzux) * Load Word Algebraic with Update Indexed (lwaux) * Load Doubleword with Update (ldu) * Load Doubleword with Update Indexed (ldux) * Load Floating Single with Update (lfsu) * Load Floating Single with Update Indexed (lfsux) * Load Floating Double with Update (lfdu) * Load Floating Double with Update Indexed (lfdux) * Store Byte with Update (stbu) * Store Byte with Update Indexed (stbux) * Store Halfword with Update (sthu) * Store Halfword with Update Indexed (sthux) * Store Word with Update (stwu) * Store Word with Update Indexed (stwux) * Store Doubleword with Update (stdu) * Store Doubleword with Update Indexed (stdux) * Store Floating Single with Update (stfsu) * Store Floating Single with Update Indexed (stfsux) * Store Floating Double with Update (stfdu) * Store Floating Double with Update Indexed (stfdux) E.g. the following behaviour is observed for an invalid load and update instruction having RA = RT. While a userspace program having an instruction word like 0xe9ce0001, i.e. ldu r14, 0(r14), runs without getting receiving a SIGILL on a Power system (observed on P8 and P9), the outcome of executing that instruction word varies and its behaviour can be considered to be undefined. Attaching an uprobe at that instruction's address results in emulation which currently performs the load as well as writes the effective address back to the base register. This might not match the outcome from hardware. To remove any inconsistencies, this adds additional checks for the aforementioned instructions to make sure that the emulation infrastructure treats them as unknown. The kernel can then fallback to executing such instructions on hardware. Fixes: 0016a4cf ("powerpc: Emulate most Book I instructions in emulate_step()") Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
-
Christophe Leroy authored
For unimplemented instructions or unimplemented SPRs, the 8xx triggers a "Software Emulation Exception" (0x1000). That interrupt doesn't set reason bits in SRR1 as the "Program Check Exception" does. Go through emulation_assist_interrupt() to set REASON_ILLEGAL. Fixes: fbbcc3bb ("powerpc/8xx: Remove SoftwareEmulation()") Signed-off-by:
-
Athira Rajeev authored
While sampling for marked events, currently we record the sample only if the SIAR valid bit of Sampled Instruction Event Register (SIER) is set. SIAR_VALID bit is used for fetching the instruction address from Sampled Instruction Address Register(SIAR). But there are some usecases, where the user is interested only in the PMU stats at each counter overflow and the exact IP of the overflow event is not required. Dropping SIAR invalid samples will fail to record some of the counter overflows in such cases. Example of such usecase is dumping the PMU stats (event counts) after some regular amount of instructions/events from the userspace (ex: via ptrace). Here counter overflow is indicated to userspace via signal handler, and captured by monitoring and enabling I/O signaling on the event file descriptor. In these cases, we expect to get sample/overflow indication after each specified sample_period. Perf event attribute will not have PERF_SAMPLE_IP set in the sample_type if exact IP of the overflow event is not requested. So while profiling if SAMPLE_IP is not set, just record the counter overflow irrespective of SIAR_VALID check. Suggested-by:
Athira Rajeev <atrajeev@linux.vnet.ibm.com> [mpe: Reflow comment and if formatting] Signed-off-by:
-
Nathan Lynch authored
dlpar_configure_connector() has two problems in its handling of ibm,configure-connector's return status: 1. When the status is -2 (busy, call again), we call ibm,configure-connector again immediately without checking whether to schedule, which can result in monopolizing the CPU. 2. Extended delay status (9900..9905) goes completely unhandled, causing the configuration to unnecessarily terminate. Fix both of these issues by using rtas_busy_delay(). Fixes: ab519a01 ("powerpc/pseries: Kernel DLPAR Infrastructure") Signed-off-by:
Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
Similarly to the x86 commit b13b1d2d ("x86/mm: In the PTE swapout page reclaim case clear the accessed bit instead of flushing the TLB"), implement ptep_clear_flush_young that does not actually flush the TLB in the case the referenced bit is cleared. Signed-off-by:
-
Nicholas Piggin authored
serialize_against_pte_lookup() performs IPIs to all CPUs in mm_cpumask. Take this opportunity to try trim the CPU out of mm_cpumask. This can reduce the cost of future serialize_against_pte_lookup() and/or the cost of future TLB flushes. Reported-by:
-
Nicholas Piggin authored
A single-threaded process that is flushing its own address space is so far the only case where the mm_cpumask is attempted to be trimmed. This patch expands that to flush in other situations, multi-threaded processes and external sources. For now it's a relatively simple occasional trim attempt. The main aim is to add the mechanism, tweaking and tuning can come with more data. Signed-off-by:
-
Nicholas Piggin authored
mm_cpumask trimming is currently restricted to be issued by the current thread of a single-threaded mm. This patch relaxes that and allows the mask to be trimmed from any context. Signed-off-by:
-
Nicholas Piggin authored
If there are no CPUs in mm_cpumask, no TLB flush is required at all. This patch adds a check for this case. Currently it's not tested for, in fact mm_is_thread_local() returns false if the current CPU is not in mm_cpumask, so it's treated as a global flush. This can come up in some cases like exec failure before the new mm has ever been switched to. This patch reduces TLBIE instructions required to build a kernel from about 120,000 to 45,000. Another situation it could help is page reclaim, KSM, THP, etc., (i.e., asynch operations external to the process) where the process is sleeping and has all TLBs flushed out of all CPUs. Signed-off-by:
-
Nicholas Piggin authored
The logic to decide what kind of TLB flush is required (local, global, or IPI) is spread multiple times over the several kinds of TLB flushes. Move it all into a single function which may issue IPIs if necessary, and also returns a flush type that is to be used. Signed-off-by:
-
Nicholas Piggin authored
Add a comment explaining part of the logic for mm_cpumask trimming, and add a (hopefully graceful) check and warning in case something gets it wrong. Signed-off-by:
-
Athira Rajeev authored
Currently Monitor Mode Control Registers and Sampling registers are part of extended regs. Patch adds support to include Performance Monitor Counter Registers (PMC1 to PMC6 ) as part of extended registers. PMCs are saved in the perf interrupt handler as part of per-cpu array 'pmcs' in struct cpu_hw_events. While capturing the register values for extended regs, fetch these saved PMC values. Simplified the PERF_REG_PMU_MASK_300/31 definition to include PMU SPRs MMCR0 to PMC6. Exclude the unsupported SPRs (MMCR3, SIER2, SIER3) from extended mask value for CPU_FTR_ARCH_300 in the new definition. PERF_REG_EXTENDED_MAX is used to check if any index beyond the extended registers is requested in the sample. Have one PERF_REG_EXTENDED_MAX for CPU_FTR_ARCH_300/CPU_FTR_ARCH_31 since perf_reg_validate function already checks the extended mask for the presence of any unsupported register. Signed-off-by:
-
Athira Rajeev authored
To support capturing of PMC's as part of extended registers, the value of SPR's PMC1 to PMC6 has to be saved in the starting of PMI interrupt handler. This is needed since we are resetting the overflown PMC before creating sample and hence directly reading SPRN_PMCx in 'perf_reg_value' will be capturing the modified value. To solve this, add a per-cpu array as part of structure cpu_hw_events and use this array to capture PMC values in the perf interrupt handler. Patch also re-factor's the interrupt handler code to use this per-cpu array instead of current local array. Signed-off-by:
-
Sandipan Das authored
This removes arch_supports_pkeys(), arch_usable_pkeys() and thread_pkey_regs_*() which are remnants from the following: commit 06bb53b3 ("powerpc: store and restore the pkey state across context switches") commit 2cd4bd19 ("powerpc/pkeys: Fix handling of pkey state across fork()") commit cf43d3b2 ("powerpc: Enable pkey subsystem") arch_supports_pkeys() and arch_usable_pkeys() were unused since their introduction while thread_pkey_regs_*() became unused after the introduction of the following: commit d5fa30e6 ("powerpc/book3s64/pkeys: Reset userspace AMR correctly on exec") commit 48a8ab4e ("powerpc/book3s64/pkeys: Don't update SPRN_AMR when in kernel mode") Signed-off-by:
Ram Pai <linuxram@us.ibm.com> Signed-off-by:
-
Bhaskar Chowdhury authored
s/mismach/mismatch/ Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Chengyang Fan authored
Remove superfluous semicolons after function definitions. Signed-off-by:
Chengyang Fan <cy.fan@huawei.com> Signed-off-by:
-
Michael Ellerman authored
The AKEBONO config has various selects under it, including some with user-selectable dependencies, which means those dependencies can be disabled. This leads to warnings from Kconfig. This can be seen with eg: $ make allnoconfig $ ./scripts/config --file build~/.config -k -e CONFIG_44x -k -e CONFIG_PPC_47x -e CONFIG_AKEBONO $ make olddefconfig WARNING: unmet direct dependencies detected for ATA Depends on [n]: HAS_IOMEM [=y] && BLOCK [=n] Selected by [y]: - AKEBONO [=y] && PPC_47x [=y] WARNING: unmet direct dependencies detected for NETDEVICES Depends on [n]: NET [=n] Selected by [y]: - AKEBONO [=y] && PPC_47x [=y] WARNING: unmet direct dependencies detected for ETHERNET Depends on [n]: NETDEVICES [=y] && NET [=n] Selected by [y]: - AKEBONO [=y] && PPC_47x [=y] WARNING: unmet direct dependencies detected for MMC_SDHCI Depends on [n]: MMC [=n] && HAS_DMA [=y] Selected by [y]: - AKEBONO [=y] && PPC_47x [=y] WARNING: unmet direct dependencies detected for MMC_SDHCI_PLTFM Depends on [n]: MMC [=n] && MMC_SDHCI [=y] Selected by [y]: - AKEBONO [=y] && PPC_47x [=y] The problem is that AKEBONO is using select to enable things that are not true dependencies, but rather things you probably want enabled in an AKEBONO kernel. That is what a defconfig is for. So drop those selects and instead move those symbols into the defconfig. This fixes all the kconfig warnings, and the result of make 44x/akebono_defconfig is the same before and after the patch. Reported-by:Yury Norov <yury.norov@gmail.com> Reported-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Nicholas Piggin authored
There is no need for this to be in asm, use the new intrrupt entry wrapper. Signed-off-by:
-
Nicholas Piggin authored
Saving and restoring soft-mask state can now be done in C using the interrupt handler wrapper functions. Signed-off-by:
-
Nicholas Piggin authored
This moves the common NMI entry and exit code into the interrupt handler wrappers. This changes the behaviour of soft-NMI (watchdog) and HMI interrupts, and also MCE interrupts on 64e, by adding missing parts of the NMI entry to them. Signed-off-by:
-
Nicholas Piggin authored
The pseries real-mode machine check handler can enable the MMU, and return from the handler with the MMU still enabled. This works, but real-mode handler wrapper exit handlers want to rely on the MMU being in real-mode. So change the pseries handler to restore the MSR after it has finished virtual mode tasks. Signed-off-by:
-
Nicholas Piggin authored
There is no need for this to be in asm, use the new interrupt entry wrapper. Signed-off-by:
-
Nicholas Piggin authored
This will be used by interrupt entry as well. Signed-off-by:
-
Nicholas Piggin authored
There is no need for this to be in asm, use the new intrrupt entry wrapper. Signed-off-by:
-
Nicholas Piggin authored
The interrupt handler wrapper functions are not the ideal place to maintain context tracking because after they return, the low level exit code must then determine if there are interrupts to replay, or if the task should be preempted, etc. Those paths (e.g., schedule_user) include their own exception_enter/exit pairs to fix this up but it's a bit hacky (see schedule_user() comments). Ideally context tracking will go to user mode only when there are no more interrupts or context switches or other exit processing work to handle. 64e can not do this because it does not use the C interrupt exit code. Signed-off-by:
-
Nicholas Piggin authored
Move irq_enter/irq_exit into asynchronous interrupt handler wrappers. Signed-off-by:
-
