This adds support for APM X-Gene ethernet driver to use ACPI table to derive
ethernet driver parameter.
Signed-off-by: Feng Kan <fkan@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Freescale mEMAC supports operating at 10/100/1000/10G, and
its associated MDIO controller is likewise capable of operating
both Clause 22 and Clause 45 MDIO buses. It is nearly identical
to the MDIO controller on the XGMAC, so we just modify that
driver.

Portions of this driver developed by:

Sandeep Singh <sandeep@freescale.com>
Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Andy Fleming <afleming@gmail.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch extends the ethtool plugin module eeprom API to support cards
whose phy support is delegated to a separate driver.

The handlers for ETHTOOL_GMODULEINFO and ETHTOOL_GMODULEEEPROM call the
module_info and module_eeprom functions if the phy driver provides them;
otherwise the handlers call the equivalent ethtool_ops functions provided
by network drivers with built-in phy support.
Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rx ring 2 size can be configured by adjusting rx-jumbo parameter
of ethtool -G.
Signed-off-by: Ramya Bolla <bollar@vmware.com>
Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: Shrikrishna Khare <skhare@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This driver makes use of the clocksource code. Previously it had only
included the proper header indirectly, but that chain was inadvertently
broken by 74d23cc7 "time: move the timecounter/cyclecounter code into its
own file."

This patch fixes the issue by including clocksource.h directly.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
net: allow setting congctl via routing table

This is the second part of our work and allows for setting the congestion
control algorithm via routing table. For details, please see individual
patches.

Since patch 1 is a bug fix, we suggest applying patch 1 to net, and then
merging net into net-next, for example, and following up with the remaining
feature patches wrt dependencies.

Joint work with Florian Westphal, suggested by Hannes Frederic Sowa.

Patch for iproute2 is available under [1], but will be reposted with along
with the man-page update when this set hits net-next.

  [1] http://patchwork.ozlabs.org/patch/418149/

Thanks!

v2 -> v3:
 - Added module auto-loading as suggested by David Miller, thanks!
  - Added patch 2 for handling possible sleeps in fib6
  - While working on this, we discovered a bug, hence fix in patch 1
  - Added auto-loading to patch 4
 - Rebased, retested, rest the same.
v1 -> v2:
 - Very sorry, I noticed I had decnet disabled during testing.
   Added missing header include in decnet, rest as is.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This work adds the possibility to define a per route/destination
congestion control algorithm. Generally, this opens up the possibility
for a machine with different links to enforce specific congestion
control algorithms with optimal strategies for each of them based
on their network characteristics, even transparently for a single
application listening on all links.

For our specific use case, this additionally facilitates deployment
of DCTCP, for example, applications can easily serve internal
traffic/dsts in DCTCP and external one with CUBIC. Other scenarios
would also allow for utilizing e.g. long living, low priority
background flows for certain destinations/routes while still being
able for normal traffic to utilize the default congestion control
algorithm. We also thought about a per netns setting (where different
defaults are possible), but given its actually a link specific
property, we argue that a per route/destination setting is the most
natural and flexible.

The administrator can utilize this through ip-route(8) by appending
"congctl [lock] <name>", where <name> denotes the name of a
congestion control algorithm and the optional lock parameter allows
to enforce the given algorithm so that applications in user space
would not be allowed to overwrite that algorithm for that destination.

The dst metric lookups are being done when a dst entry is already
available in order to avoid a costly lookup and still before the
algorithms are being initialized, thus overhead is very low when the
feature is not being used. While the client side would need to drop
the current reference on the module, on server side this can actually
even be avoided as we just got a flat-copied socket clone.

Joint work with Florian Westphal.
Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the minimum necessary for the RTAX_CC_ALGO congestion
control metric to be set up and dumped back to user space.

While the internal representation of RTAX_CC_ALGO is handled as a u32
key, we avoided to expose this implementation detail to user space, thus
instead, we chose the netlink attribute that is being exchanged between
user space to be the actual congestion control algorithm name, similarly
as in the setsockopt(2) API in order to allow for maximum flexibility,
even for 3rd party modules.

It is a bit unfortunate that RTAX_QUICKACK used up a whole RTAX slot as
it should have been stored in RTAX_FEATURES instead, we first thought
about reusing it for the congestion control key, but it brings more
complications and/or confusion than worth it.

Joint work with Florian Westphal.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds necessary infrastructure to the congestion control
framework for later per route congestion control support.

For a per route congestion control possibility, our aim is to store
a unique u32 key identifier into dst metrics, which can then be
mapped into a tcp_congestion_ops struct. We argue that having a
RTAX key entry is the most simple, generic and easy way to manage,
and also keeps the memory footprint of dst entries lower on 64 bit
than with storing a pointer directly, for example. Having a unique
key id also allows for decoupling actual TCP congestion control
module management from the FIB layer, i.e. we don't have to care
about expensive module refcounting inside the FIB at this point.

We first thought of using an IDR store for the realization, which
takes over dynamic assignment of unused key space and also performs
the key to pointer mapping in RCU. While doing so, we stumbled upon
the issue that due to the nature of dynamic key distribution, it
just so happens, arguably in very rare occasions, that excessive
module loads and unloads can lead to a possible reuse of previously
used key space. Thus, previously stale keys in the dst metric are
now being reassigned to a different congestion control algorithm,
which might lead to unexpected behaviour. One way to resolve this
would have been to walk FIBs on the actually rare occasion of a
module unload and reset the metric keys for each FIB in each netns,
but that's just very costly.

Therefore, we argue a better solution is to reuse the unique
congestion control algorithm name member and map that into u32 key
space through jhash. For that, we split the flags attribute (as it
currently uses 2 bits only anyway) into two u32 attributes, flags
and key, so that we can keep the cacheline boundary of 2 cachelines
on x86_64 and cache the precalculated key at registration time for
the fast path. On average we might expect 2 - 4 modules being loaded
worst case perhaps 15, so a key collision possibility is extremely
low, and guaranteed collision-free on LE/BE for all in-tree modules.
Overall this results in much simpler code, and all without the
overhead of an IDR. Due to the deterministic nature, modules can
now be unloaded, the congestion control algorithm for a specific
but unloaded key will fall back to the default one, and on module
reload time it will switch back to the expected algorithm
transparently.

Joint work with Florian Westphal.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can just move this to an extra function and make the code
a bit more readable, no functional change.

Joint work with Florian Westphal.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Do the nla validation earlier, outside the write lock.

This is needed by followup patch which needs to be able to call
request_module (which can sleep) if needed.

Joint work with Daniel Borkmann.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

When IPv6 host routes with metrics attached are being added, we fetch
the metrics store from the dst via COW through dst_metrics_write_ptr(),
added through commit e5fd387a.

One remaining problem here is that we actually call into inet_getpeer()
and may end up allocating/creating a new peer from the kmemcache, which
may fail.

Example trace from perf probe (inet_getpeer:41) where create is 1:

ip 6877 [002] 4221.391591: probe:inet_getpeer: (ffffffff8165e293)
  85e294 inet_getpeer.part.7 (<- kmem_cache_alloc())
  85e578 inet_getpeer
  8eb333 ipv6_cow_metrics
  8f10ff fib6_commit_metrics

Therefore, a check for NULL on the return of dst_metrics_write_ptr()
is necessary here.

Joint work with Florian Westphal.

Fixes: e5fd387a ("ipv6: do not overwrite inetpeer metrics prematurely")
Cc: Michal Kubeček <mkubecek@suse.cz>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add checking whether the call to ndo_dflt_fdb_dump is needed.
It is not expected to call ndo_dflt_fdb_dump unconditionally
by some drivers (i.e. qlcnic or macvlan) that defines
own ndo_fdb_dump. Other drivers define own ndo_fdb_dump
and don't want ndo_dflt_fdb_dump to be called at all.
At the same time it is desirable to call the default dump
function on a bridge device.
Fix attributes that are passed to dev->netdev_ops->ndo_fdb_dump.
Add extra checking in br_fdb_dump to avoid duplicate entries
as now filter_dev can be NULL.

Following tests for filtering have been performed before
the change and after the patch was applied to make sure
they are the same and it doesn't break the filtering algorithm.

[root@localhost ~]# cd /root/iproute2-3.18.0/bridge
[root@localhost bridge]# modprobe dummy
[root@localhost bridge]# ./bridge fdb add f1:f2:f3:f4:f5:f6 dev dummy0
[root@localhost bridge]# brctl addbr br0
[root@localhost bridge]# brctl addif  br0 dummy0
[root@localhost bridge]# ip link set dev br0 address 02:00:00:12:01:04
[root@localhost bridge]# # show all
[root@localhost bridge]# ./bridge fdb show
33:33:00:00:00:01 dev p2p1 self permanent
01:00:5e:00:00:01 dev p2p1 self permanent
33:33:ff:ac:ce:32 dev p2p1 self permanent
33:33:00:00:02:02 dev p2p1 self permanent
01:00:5e:00:00:fb dev p2p1 self permanent
33:33:00:00:00:01 dev p7p1 self permanent
01:00:5e:00:00:01 dev p7p1 self permanent
33:33:ff:79:50:53 dev p7p1 self permanent
33:33:00:00:02:02 dev p7p1 self permanent
01:00:5e:00:00:fb dev p7p1 self permanent
f2:46:50:85:6d:d9 dev dummy0 master br0 permanent
f2:46:50:85:6d:d9 dev dummy0 vlan 1 master br0 permanent
33:33:00:00:00:01 dev dummy0 self permanent
f1:f2:f3:f4:f5:f6 dev dummy0 self permanent
33:33:00:00:00:01 dev br0 self permanent
02:00:00:12:01:04 dev br0 vlan 1 master br0 permanent
02:00:00:12:01:04 dev br0 master br0 permanent
[root@localhost bridge]# # filter by bridge
[root@localhost bridge]# ./bridge fdb show br br0
f2:46:50:85:6d:d9 dev dummy0 master br0 permanent
f2:46:50:85:6d:d9 dev dummy0 vlan 1 master br0 permanent
33:33:00:00:00:01 dev dummy0 self permanent
f1:f2:f3:f4:f5:f6 dev dummy0 self permanent
33:33:00:00:00:01 dev br0 self permanent
02:00:00:12:01:04 dev br0 vlan 1 master br0 permanent
02:00:00:12:01:04 dev br0 master br0 permanent
[root@localhost bridge]# # filter by port
[root@localhost bridge]# ./bridge fdb show brport dummy0
f2:46:50:85:6d:d9 master br0 permanent
f2:46:50:85:6d:d9 vlan 1 master br0 permanent
33:33:00:00:00:01 self permanent
f1:f2:f3:f4:f5:f6 self permanent
[root@localhost bridge]# # filter by port + bridge
[root@localhost bridge]# ./bridge fdb show br br0 brport dummy0
f2:46:50:85:6d:d9 master br0 permanent
f2:46:50:85:6d:d9 vlan 1 master br0 permanent
33:33:00:00:00:01 self permanent
f1:f2:f3:f4:f5:f6 self permanent
[root@localhost bridge]#
Signed-off-by: Hubert Sokolowski <hubert.sokolowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tom Herbert says:

====================
ip: Support checksum returned in csmg

This patch set allows the packet checksum for a datagram socket
to be returned in csum data in recvmsg. This allows userspace
to implement its own checksum over the data, for instance if an
IP tunnel was be implemented in user space, the inner checksum
could be validated.

Changes in this patch set:
  - Move checksum conversion to inet_sock from udp_sock. This
    generalizes checksum conversion for use with other protocols.
  - Move IP cmsg constants to a header file and make processing
    of the flags more efficient in ip_cmsg_recv
  - Return checksum value in cmsg. This is specifically the unfolded
    32 bit checksum of the full packet starting from the first byte
    returned in recvmsg

Tested: Wrote a little server to get checksums in cmsg for UDP and
        verfied correct checksum is returned.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add ip_cmsg_recv_offset function which takes an offset argument
that indicates the starting offset in skb where data is being received
from. This will be useful in the case of UDP and provided checksum
to user space.

ip_cmsg_recv is an inline call to ip_cmsg_recv_offset with offset of
zero.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add ip_cmsg_recv_offset function which takes an offset argument
that indicates the starting offset in skb where data is being received
from. This will be useful in the case of UDP and provided checksum
to user space.

ip_cmsg_recv is an inline call to ip_cmsg_recv_offset with offset of
zero.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the IP_CMSG_* constants from ip_sockglue.c to inet_sock.h so that
they can be referenced in other source files.

Restructure ip_cmsg_recv to not go through flags using shift, check
for flags by 'and'. This eliminates both the shift and a conditional
per flag check.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move convert_csum from udp_sock to inet_sock. This allows the
possibility that we can use convert checksum for different types
of sockets and also allows convert checksum to be enabled from
inet layer (what we'll want to do when enabling IP_CHECKSUM cmsg).
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Calling nla_nest_cancel() in a different order as the nesting was
built up can lead to negative offsets being calculated which
results in skb_trim() being called with an underflowed unsigned
int. Warn if mark < skb->data as it's definitely a bug.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hariprasad Shenai says:

====================
RDMA/cxgb4/cxgb4vf/csiostor: Cleanup register defines

This series continues to cleanup all the macros/register defines related to
SGE, PCIE, MC, MA, TCAM, MAC, etc that are defined in t4_regs.h and the
affected files.

Will post another 1 or 2 series so that we can cover all the macros so that
they all follow the same style to be consistent.

The patches series is created against 'net-next' tree.
And includes patches on cxgb4, cxgb4vf, iw_cxgb4 and csiostor driver.

We have included all the maintainers of respective drivers. Kindly review the
change and let us know in case of any review comments.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch cleanups all PL, XGMAC and SF related macros/register defines
that are defined in t4_regs.h and the affected files
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch cleanups all TP, MPS and TCAM related macros/register defines
that are defined in t4_regs.h and the affected files
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch cleanups all MC, MA and CIM related macros/register defines that are
defined in t4_regs.h and the affected files.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch cleansup remaining SGE related macros/register defines and all PCI
related ones that are defined in t4_regs.h and the affected files.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch cleanups all SGE related macros/register defines that are
defined in t4_regs.h and the affected files.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch uses skb->xmit_more flag to batch TX requests.
TX is flushed either when xmit_more is false or there is
no more space in the TXQ.

Skyhawk-R and BEx chips require an even number of wrbs to be posted.
So, when a batch of TX requests is accumulated, the last header wrb
may need to be fixed with an extra dummy wrb.

This patch refactors be_xmit() routine as a sequence of be_xmit_enqueue()
and be_xmit_flush() calls. The Tx completion code is also
updated to be able to unmap/free a batch of skbs rather than a single
skb.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The regmap_config struct may be const because it is not modified by the
driver and regmap_init() accepts pointer to const.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixup below build error:

include/linux/list_nulls.h: In function ‘hlist_nulls_del’:
include/linux/list_nulls.h:84:13: error: ‘LIST_POISON2’ undeclared (first use in this function)
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixup below build error:

include/linux/rhashtable.h: At top level:
include/linux/rhashtable.h:118:34: error: field ‘mutex’ has incomplete type
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use normal facilities to avoid printing each byte
on a separate line.

Now emits at KERN_DEBUG instead of KERN_INFO.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When running in kdump kernel, reduce number of resources used by the driver.
This will enable NIC to operate in low memory kdump kernel environment.

Also change the driver version to .83
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jesse Gross says:

====================
Geneve Cleanups

Much of the basis for the Geneve code comes from VXLAN. However,
Geneve is quite a bit simpler than VXLAN and so this cleans up a
lot of the infrastruction - particularly around locking - where the
extra complexity is not necessary.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When searching for an existing socket to reuse, the address family
is not taken into account - only port number. This means that an
IPv4 socket could be used for IPv6 traffic and vice versa, which
is sure to cause problems when passing packets.

It is not possible to trigger this problem currently because the
only user of Geneve creates just IPv4 sockets. However, that is
likely to change in the near future.
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The hash table for open Geneve ports is used only on creation and
deletion time. It is not performance critical and is not likely to
grow to a large number of items. Therefore, this can be changed
to use a simple linked list.
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The existing Geneve locking scheme was pulled over directly from
VXLAN. However, VXLAN has a number of built in mechanisms which make
the locking more complex and are unlikely to be necessary with Geneve.
This simplifies the locking to use a basic scheme of a mutex
when doing updates plus RCU on receive.

In addition to making the code easier to read, this also avoids the
possibility of a race when creating or destroying sockets since
UDP sockets and the list of Geneve sockets are protected by different
locks. After this change, the entire operation is atomic.
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The work queue is used only to free the UDP socket upon destruction.
This is not necessary with Geneve and generally makes the code more
difficult to reason about. It also introduces nondeterministic
behavior such as when a socket is rapidly deleted and recreated, which
could fail as the the deletion happens asynchronously.
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Thomas Graf says:

====================
rhashtable: Per bucket locks & deferred table resizing

Prepares for and introduces per bucket spinlocks and deferred table
resizing. This allows for parallel table mutations in different hash
buckets from atomic context. The resizing occurs in the background
in a separate worker thread while lookups, inserts, and removals can
continue.

Also modified the chain linked list to be terminated with a special
nulls marker to allow entries to move between multiple lists.

Last but not least, reintroduces lockless netlink_lookup() with
deferred Netlink socket destruction to avoid the side effect of
increased netlink_release() runtime.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Defers the release of the socket reference using call_rcu() to
allow using an RCU read-side protected call to rhashtable_lookup()

This restores behaviour and performance gains as previously
introduced by e341694e ("netlink: Convert netlink_lookup() to use
RCU protected hash table") without the side effect of severely
delayed socket destruction.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to allow for wider usage of rhashtable, use a special nulls
marker to terminate each chain. The reason for not using the existing
nulls_list is that the prev pointer usage would not be valid as entries
can be linked in two different buckets at the same time.

The 4 nulls base bits can be set through the rhashtable_params structure
like this:

struct rhashtable_params params = {
        [...]
        .nulls_base = (1U << RHT_BASE_SHIFT),
};

This reduces the hash length from 32 bits to 27 bits.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>