- 20 Dec, 2006 30 commits
-
-
Chris Frey authored
When sending CONTROL URB's using the usual CONTROL ioctl, logging works fine, but when sending them via SUBMITURB, like VMWare does, the control fields are not logged. This patch fixes that. I didn't see any major changes to devio.c recently, so this patch should apply cleanly to even the latest kernel. I can resubmit if it doesn't. From: Chris Frey <cdfrey@foursquare.net> Signed-off-by:Greg Kroah-Hartman <gregkh@suse.de>
-
Wojtek Kaniewski authored
This patch performs additional checks in at91_udc, just in case of some spurious interrupts or device enumeration. Signed-off-by:
Wojtek Kaniewski <wojtekka@toxygen.net> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Cc: Andrew Victor <andrew@sanpeople.com> Signed-off-by:
-
Wojtek Kaniewski authored
This patch zeroes some variables when usb_gadget_register_driver() fails. gadgetfs does a dummy registration to get the name of the USB driver and then waits for user-land driver. If someone plugs the cable in the meantime, bad things happen, because at91_udc has been left in inconsistent state. Signed-off-by:
-
Wojtek Kaniewski authored
This patch allows gadget drivers that support high speed (e.g. gadgetfs) to work properly with at91_udc. Fix suggested by Milan Svoboda in http://marc.theaimsgroup.com/?l=linux-usb-devel&m=115822184711817Signed-off-by:
-
Tony Olech authored
ELAN's U132 is a USB to CardBus OHCI controller adapter, designed specifically for CardBus 3G data cards to function in machines without a CardBus slot. The "ftdi-elan" module is a USB client driver, that detects a supported CardBus OHCI controller plugged into the U132 adapter and thereafter provides the conduit for for access by the "u132-hcd" module. The "u132-hcd" module is a (cut-down OHCI) host controller that supports a single OHCI function of the CardBus card inserted into the U132 adapter. The problem with the initial implementation is that when the CardBus card inserted into the U132 adapter has multiple functions (and a CardBus card can support up to 4 functions), it was the first function that was arbitrarily choosen. The first batch of 3G cards tested, like the Merlin Qualcomm V620, have two functions each supporting a seperate USB OHCI host controller, of which it was that first function that is wired up to the 3G modem. Then along comes the Vodafone Mobile Connect 3G/GPRS data card, aka "Option GT 3G Quad" as printed on it's rear or "Option N.V. GlobeTrotter Fusion Quad Lite" as read with "lspci -v". And it has the meaningful functionality in the second CardBus function. That presents a problem because it was the "ftdi-elan" module alone that knows how to communicate to the embedded CardBus slot and the "u132-hcd" module alone that knows how to access the pcmcia configuration and CardBus accessible memory space. And of course, the information about attached (internally hardwired) devices is contained within USB configuration embedded somewhere within the CardBus card. If only the "u132-hcd" module probe() interface could return a result code that propagated back to the instigating function platform_device_register() then the "ftdi-elan" module could try an alternative CardBus function. However in spite of the recent changes to the drivers/base/ routines that moved device_attach() from bus_add_device() to bus_attach_device() both of those routines lose the "failed to attach" 0 result code and thus the calling routine, namely device_add() is incapable of propaging the "failed to attach" condition back to platform_device_add() and consequently back to the caller of platform_device_register() Experiments show that patching bus_attach_device() to return ENODEV fails with the kernel locking up very early during boot. But, however, if the patch is restricted to calls from platform_device_add() then it does seem to work. Unfortunately, until the kernel's drivers/base is properly modified to propagate -ENODEV back to the caller of platform_device_register(), it is necessary to "fix" the "ftdi-elan" module by importing knowledge from the "u132-hcd" module. This is the reason for the duplicated functionality introduced in this patch. Signed-off-by:Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by:
-
Andrew Victor authored
This is an update to the AT91 USB Device (Gadget) driver. Adds support for the Atmel AT91SAM9260 and AT91SAM9261 processors. The only difference is how they handle the pullup pin. [Patch from Patrice Vilchez] Need to clear any pending USB Device interrupts before registering the interrupt handler. The bootloader might have been using the USB Device port. [Patch from Peer Georgi] VBUS detection is handled by a GPIO interrupt which only triggers on a change. Is is therefore necessary to read the current VBUS state explicitly at startup. [Patch from Peer Georgi] Signed-off-by:
Andrew Victor <andrew@sanpeople.com> Signed-off-by:
-
Andrew Victor authored
This is an update to the AT91 USB Device (Gadget) driver. The base I/O address provided in the platform_device resources is now ioremap()'ed instead of using a statically mapped memory area. This helps portability to the newer AT91sam926x processors. The major change is that we now have to pass a 'struct at91_udc' parameter to at91_udp_read() and at91_udp_write(). Signed-off-by:
-
Vitaly Wool authored
OHCI HCD (Host Controller Driver) for USB. Bus Glue for PNX8550. Signed-off-by:
Vitaly Wool <vitalywool@gmail.com> Signed-off-by:
-
Takamasa Ohtake authored
I have found a problem where the root_port_reset() goes into an infinite loop and stalls the kernel. This happens when a hardware fault inside the machine occurs during a small timing window. In case of USB device connection, if a USB device responds to hcd_submit_urb(), and later the controller fails before root_port_reset(), root_port_reset() will loop infinitely because ohci_readl() will always return "-1". Such a failure can include ejecting a CardBus OHCI controller. The probability of this problem is low, but it will increase if PnP type usage is frequent. The attached patch can solve this problem and I believe that it is better to fix this problem. Signed-off-by:
Takamasa Ohtake <ohtake-txa@necst.nec.co.jp> Signed-off-by:
-
Andrew Victor authored
Remove a warning about an unused variable in the OHCI bus glue for at91. Signed-off-by:
-
David Brownell authored
This is an OHCI cleanup patch ... it removes a lot of erroneous whitespace (space before tab, at end of line) as well as the obsolete inline changelog. Signed-off-by:
-
David Brownell authored
Update maintainer records for two USB host controller drivers. I'm the main point of contact for both EHCI and OHCI, although I don't have much time for them any more. Roman hasn't submitted OHCI patches for years. Signed-off-by:
-
David Brownell authored
Allow gadget drivers to omit the unbind() method. When they're statically linked, that's an appropriate memory saving tweak. Similarly, provide consistent/simpler handling for a should-not-happen error case: removing a peripheral controller driver when a gadget driver is still loaded. Such code dates back to early versions of the first implementation of the gadget API, and has never been triggered. Includes relevant section annotation fixs for gmidi.c, file_storage.c, and serial.c; we don't yet have an "init or exit" annotation. Also some whitespace fixes in gmidi.c (space at EOL, before tabs, etc). Signed-off-by:
-
Alan Stern authored
Certain boards seem to like to issue false overcurrent notifications, for example on ports that don't have anything connected to them. This looks like a hardware error, at the level of noise to those ports' overcurrent input signals (or non-debounced VBUS comparators). This surfaces to users as truly massive amounts of syslog spam from khubd (which is appropriate for real hardware problems, except for the volume from multiple ports). Using this new "ignore_oc" flag helps such systems work more sanely, by preventing such indications from getting to khubd (and spamming syslog). The downside is of course that true overcurrent errors will be masked; they'll appear as spontaneous disconnects, without the diagnostics that will let users troubleshoot issues like short-circuited cables. In addition, controllers with no devices attached will be forced to poll for new devices rather than relying on interrupts, since each overcurrent event would generate a new interrupt. This patch (as826) is essentially a copy of David Brownell's ignore_oc patch for ehci-hcd, ported to uhci-hcd. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Andrew Morton authored
Taken from http://bugzilla.kernel.org/show_bug.cgi?id=7508 When the Nokia E70 Phone is plugged in to the USB port, I get: end_request: I/O error, dev sda, sector 1824527 sd 0:0:0:0: SCSI error: return code = 0x10070000 end_request: I/O error, dev sda, sector 1824535 sd 0:0:0:0: SCSI error: return code = 0x10070000 The fix is to add these lines to drivers/usb/storage/unusual_devs.h: Cc: <honkkis@gmail.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Burman Yan authored
Signed-off-by:
-
Ping Cheng authored
Fixes Intuos3 4x6 bugs Signed-off-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
-
Johann Wilhelm authored
Added VendorId and ProductId for Huawei E220 USB Modem Signed-off-by:
Johann Wilhelm <johann.wilhelm@student.tugraz.at> Signed-off-by:
-
Johann Wilhelm authored
This prevents the kernel from detecting the virtual cd-drive with the Windows drivers. Signed-off-by:
-
Petko Manolov authored
This one adds another vendor ID to rtl8150 driver. Please apply. Signed-off-by:
Petko Manolov <petkan@nucleusys.com> Signed-off-by:
-
Jeff Garzik authored
When u132-hcd is built, it includes local header ohci.h, which appears to have been intended only for use by ohci-hcd. This throws warnings about functions which are defined and not used. The warnings thrown are because three small functions are implemented in the header, but not declared 'inline', a rather strange affair. Since these functions are small, let's go ahead and define them as 'inline', just like the inline functions surrounding them. This makes things more consistent, and kills the warnings. Signed-off-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
David Clare authored
Added a device specific ioctl function to prevent the disabling of canonical mode. EINVAL is returned for any TCSETSF ioctl that doesn't have ICANON set. This patch is for 2.6.17 or later kernels. When "hwinfo --modem" is executed it opens the funsoft USB serial device and disables canonical mode. The device is kept this way until hwininfo has finished probing any modems on a system. The funsoft device expects to be running in canonical mode. Switching the device to raw mode can cause incomplete data packets and device timeouts. Signed-off-by:
David Clare <david@funsoft.com> Signed-off-by:
-
Johannes Hoelzl authored
this patch adds the Baltech Reader ID to the list of USB IDs in the CP2101 driver. From: Johannes Hoelzl <johannes.hoelzl@gmx.de> Signed-off-by: -
Oliver Neukum authored
this patch: - converts usblp fully to mutex - makes sleeping interruptible where EINTR can be returned anyway Signed-off-by:
Oliver Neukum <oliver@neukum.name> Signed-off-by:
-
Alan authored
Several drivers have bogus ioctl code that tries unneccessarily to override the standard processing. In the three cases here the actual code is not only wrong but also not required as they implement the proper set_termios method as well. Remove the junk. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Oliver Neukum authored
as David has objected to the patch against the gl620a driver, here's a patch implementing David' suggestion of removing the incomplete ifdefed code from the gl620a driver. Signed-off-by:
-
Jan Capek authored
below is a patch for the ftdi_sio driver to include a new device ID for CCS MachX PIC programmer. From: Jan Capek <jan@ccsinfo.com> Signed-off-by: -
Eagle Jones authored
Added the device id (0x413c, 0x8115) for the Dell wireless HSDPA 5500, which is a rebranded Novatel EU730. Signed-off-by:
Eagle Jones <eagle@newdream.net> Signed-off-by:
-
Oliver Neukum authored
in disconnect you set the interface's private data to NULL. In your IO methods you unconditionally follow the pointer into never never land. Signed-off-by:
-
Sean Young authored
The PhidgetServo causes an Oops when any of its sysfs attributes are read or written too, making the driver useless. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
- 19 Dec, 2006 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: [PATCH] Generic HID layer - update MAINTAINERS input/hid: Supporting more keys from the HUT Consumer Page [PATCH] Generic HID layer - build: USB_HID should select HID
-
- 18 Dec, 2006 9 commits
-
-
Evgeniy Polyakov authored
Signed-off-by:
Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Li Yewang authored
Fix the redirect packet of the router if the jiffies wraparound. Signed-off-by:
Li Yewang <lyw@nanjing-fnst.com> Signed-off-by:
-
Leigh Brown authored
The message logged in tcp_v4_inbound_md5_hash when the hash was expected but not found was reversed. Signed-off-by:
Leigh Brown <leigh@solinno.co.uk> Signed-off-by:
-
Leigh Brown authored
md5sig_info.alloced4 must be set to zero when freeing keys4, otherwise it will not be alloc'd again when another key is added to the same socket by tcp_v4_md5_do_add. Signed-off-by:
-
Evgeniy Polyakov authored
Linus has changed work queue structure and has not tested it with connector compiled in, his changes break the build. Attached patch fixes compilation error. Patch is against commit 99f5e971. Thanks to Toralf Förster for pointing this out. Signed-off-by:
-
Michael Chan authored
Update version to 3.71. Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Michael Chan authored
The 5906 PHY requires a special register bit to power down and up the PHY. Signed-off-by:
-
Michael Chan authored
Hot-plug scripts can call tg3_open() as soon as register_netdev() is called in tg3_init_one(). We need to call pci_set_drvdata() before register_netdev(), and netif_carrier_off() needs to be moved to tg3_open() to avoid race conditions. Signed-off-by:
-
Michael Chan authored
tp->link_config.orig_* values must be assigned during tg3_set_settings() because these values will be used to setup the link speed during tg3_open(). Without these assignments, the link speed settings will be all messed by if tg3_set_settings() is called when the device is down. Signed-off-by:
-
