- 09 Aug, 2023 22 commits
-
-
Ran Sun authored
Fix the following errors reported by checkpatch: ERROR: code indent should use tabs where possible Signed-off-by:
Ran Sun <sunran001@208suo.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Ran Sun authored
Fix the following errors reported by checkpatch: ERROR: that open brace { should be on the previous line ERROR: space required after that ',' (ctx:VxV) Signed-off-by: -
Ran Sun authored
Fix the following errors reported by checkpatch: ERROR: that open brace { should be on the previous line Signed-off-by: -
Ran Sun authored
Fix the following errors reported by checkpatch: ERROR: open brace '{' following struct go on the same line ERROR: space prohibited before open square bracket '[' Signed-off-by: -
Ran Sun authored
Fix the following errors reported by checkpatch: ERROR: that open brace { should be on the previous line ERROR: space prohibited after that open parenthesis '(' Signed-off-by: -
Ran Sun authored
Fix the following errors reported by checkpatch: ERROR: that open brace { should be on the previous line Signed-off-by: -
Ran Sun authored
Fix the following errors reported by checkpatch: ERROR: spaces required around that '=' (ctx:VxW) ERROR: space required after that ',' (ctx:VxV) Signed-off-by:
-
Ran Sun authored
Fix the following errors reported by checkpatch: ERROR: return is not a function, parentheses are not required ERROR: space required after that ',' (ctx:VxV) ERROR: space required before the open parenthesis '(' ERROR: need consistent spacing around '-' (ctx:WxV) Signed-off-by: -
Ran Sun authored
Fix the following errors reported by checkpatch: ERROR: need consistent spacing around '/' (ctx:WxV) ERROR: code indent should use tabs where possible Signed-off-by:
-
Ran Sun authored
Fix the following errors reported by checkpatch: ERROR: that open brace { should be on the previous line ERROR: space required after that ',' (ctx:VxV) ERROR: space prohibited before that ',' (ctx:WxV) Signed-off-by: -
Ran Sun authored
Fix the following errors reported by checkpatch: ERROR: that open brace { should be on the previous line ERROR: spaces required around that '||' (ctx:WxO) Signed-off-by: -
Ran Sun authored
Fix the following errors reported by checkpatch: ERROR: spaces required around that '=' (ctx:WxV) ERROR: spaces required around that '&&' (ctx:VxW) ERROR: that open brace { should be on the previous line ERROR: space required before the open parenthesis '(' ERROR: space required before the open brace '{' ERROR: spaces required around that ':' (ctx:VxW) Signed-off-by: -
Ran Sun authored
Fix the following errors reported by checkpatch: ERROR: space prohibited before that ',' (ctx:WxW) Signed-off-by:
-
Ran Sun authored
Fix the following errors reported by checkpatch: ERROR: space prohibited before that ',' (ctx:WxW) Signed-off-by:
-
Ran Sun authored
Fix the following errors reported by checkpatch: ERROR: code indent should use tabs where possible ERROR: that open brace { should be on the previous line Signed-off-by: -
Ran Sun authored
Fix the following errors reported by checkpatch: ERROR: that open brace { should be on the previous line ERROR: space required after that ',' (ctx:VxV) ERROR: spaces required around that '=' (ctx:VxW) ERROR: else should follow close brace '}' Signed-off-by: -
Ran Sun authored
Fix the following errors reported by checkpatch: ERROR: space required before the open parenthesis '(' ERROR: that open brace { should be on the previous line Signed-off-by: -
Ran Sun authored
Fix the following errors reported by checkpatch: ERROR: open brace '{' following struct go on the same line ERROR: spaces required around that '=' (ctx:VxW) ERROR: that open brace { should be on the previous line Signed-off-by: -
Ran Sun authored
Fix the following errors reported by checkpatch: ERROR: that open brace { should be on the previous line ERROR: code indent should use tabs where possible Signed-off-by: -
Ruan Jinjie authored
There are many ternary operators, the true or false judgement of which is unnecessary in C language semantics. Signed-off-by:
Ruan Jinjie <ruanjinjie@huawei.com> Signed-off-by:
-
Denis Arefev authored
Added return value check hpd_enable Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by:
Denis Arefev <arefev@swemel.ru> Signed-off-by:
-
Alex Deucher authored
Since the gang_size check is outside of chunk parsing loop, we need to reset i before we free the chunk data. Suggested by Ye Zhang (@VAR10CK) of Baidu Security. Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
- 07 Aug, 2023 18 commits
-
-
Lijo Lazar authored
Report VBIOS version in vbios_version sysfs node instead of part number. Part number remains constant for a SKU type. Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Martin Leung authored
This version brings along following fixes: - Fix a regression in blank pixel data caused by coding mistake - Fix a bug when searching for insert_above_mpcc - Update add plane to context logic with a new algorithm - Adjust visual confirm dpp height offset to be 1/240 of v addressable - Add interface to enable DPIA trace - Support plane clip with zero recout size - Blocking invalid 420 modes on HDMI TMDS for DCN31 and DCN314 - Make mpc32 functions available to future DCNs - Change HDCP update sequence for DM Acked-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
Martin Leung <martin.leung@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Bhawanpreet Lakha authored
Refactor the sequence in hdcp_update_display() to use mod_hdcp_update_display(). Previous sequence: - remove()->add() This Sequence was used to update the display, (mod_hdcp_update_display didn't exist at the time). This meant for any hdcp updates (type changes, enable/disable) we would remove, reconstruct, and add. This leads to unnecessary calls to psp eventually New Sequence using mod_hdcp_update_display(): - add() once when stream is enabled - use update() for all updates The update function checks for prev == new states and will not unnecessarily end up calling psp via add/remove. Reviewed-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by:
Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Tested-by:
-
Wenjing Liu authored
[why] Secondary DPP pipes are used for rendering secondary layers of planes. The name "for layer" doesn't make it obvious. The function is acquiring a free pipe as secondary dpp pipe only. We rename it so it is more obvious. In a future follow up change, we want to add functions to acquire free pipe as opp head pipe or otg master pipe as well. They will have their separate allocation priority. Reviewed-by:
Jun Lei <jun.lei@amd.com> Acked-by:
Wenjing Liu <wenjing.liu@amd.com> Tested-by:
-
Wenjing Liu authored
[why] generic dc resource file should not know what an optimal idle pipe is because this is dcn hardware dependent. [how] We move the optimial pipe searching logic in dcn specific layer. Reviewed-by:
-
Alvin Lee authored
[Description] In overclocking scenarios the max memclk could be higher than the DC mode limit. However, for configs that don't support MCLK switching we need to set the max memclk to the overclocked max instead of the DC mode max or we could result in underflow. Reviewed-by:
Samson Tam <samson.tam@amd.com> Acked-by:
Alvin Lee <alvin.lee2@amd.com> Tested-by:
-
Mike Hsieh authored
Add a new vendor ID code for reference Reviewed-by:
Mike Hsieh <mike.hsieh@amd.com> Tested-by:
-
Leo Chen authored
[Why & How] HDMI TMDS does not have ODM support. Filtering 420 modes that exceed the 4096 FMT limitation on DCN314 will resolve intermittent corruptions issues. Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by:
Leo Chen <sancchen@amd.com> Tested-by:
-
Leo Chen authored
[Why & How] HDMI TMDS does not have ODM support. Filtering 420 modes that exceed the 4096 FMT limitation on DCN31 will resolve intermittent corruptions issues. Reviewed-by:
-
Leo Chen authored
[Why & How] Revert commit 6917b0b7 ("drm/amd/display: Read down-spread percentage from lut to adjust dprefclk.") This change was causing 240hz display to not light up after s0i3. Reviewed-by:
-
Wenjing Liu authored
[why] With previous ODM + MPO policy we will only allocate pipes when MPO plane has intersection with current ODM slice. With this policy we have to indicate scaling change when plane clip is updated in case plane clip change causes MPO plane to go in or out current ODM slice. With new ODM + MPO policy we allocate pipe independent from plane clip size so we no longer treat it as a scaling change. There no need to do a full update due to clip size change anymore. Reviewed-by:
-
Wenjing Liu authored
[why] For timing with large v addressable visual confirm is just too small. It is difficult to tell visually which DPP we are using. On the other hand with timing with small v addressable visual confirm is too large and covers the UI area. [how] We calculate visual confirm dpp height offset based on v addressable so it stays relatively the same height i.e. 1/240 verticle portion of the screen. Reviewed-by:
-
Wenjing Liu authored
[why] Preivous algorithm for finding an optimal idle pipe for a new plane was implemented to handle dynamic pipe allocation when MPO plane moves from one ODM slice to the other. Now pipe allocation is more static so it no longer depends on the MPO plane's position. We are simplifying our logic and remove unnecessary handling in our code. [how] Apply a new simplified version of pipe resource allocation logic to reduce unnecessary flip delay caused by swapping secondary dpp pipe to other MPC blending tree. Reviewed-by:
-
Wenjing Liu authored
[why] We only acquire MPO pipe for blending tree where the plane clip will be rendered. If an MPO plane is outside current ODM slice rect, we will skip pipe allocation. With new programming policy we want to allocate pipes for every ODM slice blending tree even for those whose ODM slice rect doesn't intersect with plane clip. This is aligned with DML validation so the pipe topology is programmed independently from the plane's position and dst plane size. [how] - Remove the logic to allocate pipe only when the MPO plane intersects with ODM slice and replace with the new logic to always allocate pipes. - Remove the logic to tear down ODM configuration in favor for supporting secondary MPO planes. - Remove the logic to use full update when MPO goes accross ODM slice boundary. Reviewed-by:
-
Wenjing Liu authored
[why] If plane clip is outside current pipe's ODM slice rect, our logic will fail validation because we assume that when a pipe is acquired to support a plane clip, it must blend some portion of the plane on the screen. This assumption needs to be changed. When a pipe is acquired to render the plane, we are now allowing it to support a case where it can take minimum viewport and draw with zero recout size when the plane clip is outside current ODM slice rect. The reason is that we want to allocate and get the pipe pre-programmed so it is ready to be rendered when user moves the plane over to the current ODM slice with a fast update. Whereas with the existing solution when user moves the plane over, we will need to allocate a pipe as needed and power it up and program it through a full update. This not only impacts the user experience with unnecessary delay of a frame but also doesn't generate any benefit to the user because DML doesn't support it. DML will invalidate based on worst case scenario and it doesn't depend on the plane location. So having our programming sequence support such dynamic pipe allocation is not meaningful anyway. [how] In build scaler params allow recout to be zero size and if viewport is smaller than minimum, set minimum viewport size. Reviewed-by:
-
Austin Zheng authored
[Why] Flash of corruption observed when UCLK switching after transitioning from DTBCLK to DPREFCLK on subVP(DP) + subVP(HDMI) config Scenario where DPREFCLK is required instead of DTBCLK is not expected [How] Always set the DTBCLK source as DTBCLK0 Reviewed-by:
Austin Zheng <austin.zheng@amd.com> Tested-by:
-
Austin Zheng authored
[Why] Front-end would be programmed using the stream update flags set from the previous update and the full update should be triggered whenever commit_state_no_check gets called. [How] Set all stream update flags before programming the front-end Clear all flags that got set to avoid redundant programming Reviewed-by:
-
Wesley Chalmers authored
Make the mpc32 functions available for future DCNs to use Reviewed-by:
Wesley Chalmers <wesley.chalmers@amd.com> Tested-by:
-
