Document the compatible for aspeed,ast2600-pwm-tach device, which can
support up to 16 PWM outputs and 16 fan tach input.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240221104025.1306227-3-billy_tsai@aspeedtech.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add common fan properties bindings to a schema.

Bindings for fan controllers can reference the common schema for the
fan

child nodes:

  patternProperties:
    "^fan@[0-2]":
      type: object
      $ref: fan-common.yaml#
      unevaluatedProperties: false
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20240221104025.1306227-2-billy_tsai@aspeedtech.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

tda38640 has a single regulator output along with CAT_FAULT# pin to
report internal events. Hence add properties for regulator & interrupt.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240307113325.3800181-1-naresh.solanki@9elements.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add of_match table for "ti,amc6821" compatible string.
This fixes automatic driver loading by userspace when using device-tree,
and if built as a module like major linux distributions do.

While devices probe just fine with i2c_device_id table, userspace can't
match the "ti,amc6821" compatible string from dt with the plain
"amc6821" device id. As a result, the kernel module can not be loaded.

Cc: stable@vger.kernel.org
Signed-off-by: Josua Mayer <josua@solid-run.com>
Link: https://lore.kernel.org/r/20240307-amc6821-of-match-v1-1-5f40464a3110@solid-run.com
[groeck: Cleaned up patch description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Reference common hwmon schema which has the generic "label" property,
parsed by Linux hwmon subsystem.

To: Jean Delvare <jdelvare@suse.com>
To: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240229-mbly-i2c-v2-2-b32ed18c098c@bootlin.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

'DIV_TO_REG' function is not used:

  sis5595.c:159:18: error: unused function 'DIV_TO_REG' [-Werror,-Wunused-function]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240225202841.60740-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Reference common hwmon schema in the bindings which have and customize
the "shunt-resistor-micro-ohms" property.  While this does not make the
binding smaller, it brings common definition of that property and also
allows generic "label" (parsed by Linux hwmon core code).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240224-dt-bindings-hwmon-common-v2-5-b446eecf5480@linaro.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Reference common hwmon schema which allows to drop the
"shunt-resistor-micro-ohms" property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240224-dt-bindings-hwmon-common-v2-4-b446eecf5480@linaro.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Reference common hwmon schema which allows to drop the
"shunt-resistor-micro-ohms" property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240224-dt-bindings-hwmon-common-v2-3-b446eecf5480@linaro.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Reference common hwmon schema which allows to drop the "label" property.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240224-dt-bindings-hwmon-common-v2-2-b446eecf5480@linaro.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add a common hwmon schema for two properties:
1. "label", because Linux hwmon core code parses it.
2. "shunt-resistor-micro-ohms", because several devices already use it.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240224-dt-bindings-hwmon-common-v2-1-b446eecf5480@linaro.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

If a chip only provides a single regulator, it should be named 'vout'
and not 'vout0'. Declare regulator using PMBUS_REGULATOR_ONE() to make
that happen.

Cc: Conor Dooley <conor@kernel.org>
Cc: Naresh Solanki <naresh.solanki@9elements.com>
Cc: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240223-harmless-covenant-9cd3d4f1cfd2@spudSigned-off-by: Guenter Roeck <linux@roeck-us.net>

If a chip only provides a single regulator, it should be named 'vout'
and not 'vout0'. Declare regulator using PMBUS_REGULATOR_ONE() to make
that happen.

Cc: Conor Dooley <conor@kernel.org>
Cc: Naresh Solanki <naresh.solanki@9elements.com>
Cc: Zev Weiss <zev@bewilderbeest.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240223-player-buckskin-01405c5889c4@spudSigned-off-by: Guenter Roeck <linux@roeck-us.net>

If a chip only provides a single regulator, it should be named 'vout'
and not 'vout0'. Declare regulator using PMBUS_REGULATOR_ONE() to make
that happen.

Cc: Conor Dooley <conor@kernel.org>
Cc: Naresh Solanki <naresh.solanki@9elements.com>
Cc: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240223-catnap-companion-c42fdd8ad110@spudSigned-off-by: Guenter Roeck <linux@roeck-us.net>

These devices are regulators may need to make use of the common
regulator properties, but these are not permitted while only documented
in trivial-devices.yaml
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240223-blabber-obnoxious-353e519541a6@spud
[groeck: Dropped empty line at end of patch]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

All devices documented in the lm25066 binding are intended for use with
a regulator, be that for purely monitoring purposes (lm25056) or, for
the other devices, as the controller of that regulator. The binding does
not currently allow regulator child nodes, so add one.

Each of these devices interacts with only a single regulator and
documentation refers to it as "Vout", hence the choice of child node
name.
Acked-by: Zev Weiss <zev@bewilderbeest.net>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240223-tingling-mutt-dd55dd87ff5e@spudSigned-off-by: Guenter Roeck <linux@roeck-us.net>

While NCT6799 is mostly compatible to NCT6798, it needs a separate
compatible entry because it is not completely compatible and does
require chip specific code in the driver.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20240221155158.2234898-1-linux@roeck-us.netSigned-off-by: Guenter Roeck <linux@roeck-us.net>

I am listed as maintainer of several individual hardware monitoring drivers
and for the hardware monitoring subsystem itself. That is redundant and
just bloats the MAINTAINERS file. Drop all the redundant entries.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The URL for the MAX6620 datasheet has changed. Update it to reflect the
current location.
Signed-off-by: Okan Akyuz <okanakyuz@okanakyuz.com>
Link: https://lore.kernel.org/r/20240216075212.69118-1-okanakyuz@okanakyuz.com
[groeck: Updated subject and patch description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Use dev_err_probe() to slightly simplify printing errors during probe.
No functional changes intended.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240214-axi-fan-control-no-of-v1-3-43ca656fe2e3@analog.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Use sysfs_emit() instead of directly call sprintf().
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240214-axi-fan-control-no-of-v1-2-43ca656fe2e3@analog.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Don't directly use OF and use device property APIs. In addition, this
makes the probe() code neater and also allow us to move the
of_device_id table to it's natural place.

While at it, make sure to explicitly include mod_devicetable.h for the
of_device_id table.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240214-axi-fan-control-no-of-v1-1-43ca656fe2e3@analog.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add support for handheld AYANEO AIR Plus with the same EC registers
to add proper fan control.

Functionality was tested successfully.
Signed-off-by: Sebastian Kranz <tklightforce@googlemail.com>
Link: https://lore.kernel.org/r/20240209090157.3232-1-tklightforce@googlemail.com
[groeck: Fixed up commit message]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The return path can be improved by returning upon first failure. The
current implementation would try to register the second interrupt even
if the first one failed, which is unnecessary.

Moreover, if no irqs are available, the return value should be zero
(the driver supports the use case with no interrupts). Currently the
initial value is unassigned and that may lead to returning an unknown
value if stack variables are not automatically set to zero and no irqs
were provided.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-hwmon/294e4634-89d4-415e-a723-b208d8770d7c@gmail.com/T/#tSigned-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240207-chipcap2_init_vars-v1-2-08cafe43e20e@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

The reg_val variable in cc2_get_reg_val() might be used without a known
value if cc2_read_reg() fails. That leads to a useless data conversion
because the returned error means the read operation failed and the data is
not relevant.

That makes its initial value irrelevant as well, so skip the data
conversion instead. If no error happens, a value is assigned to reg_val
and the data conversion is required.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-hwmon/294e4634-89d4-415e-a723-b208d8770d7c@gmail.com/T/#tSigned-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240207-chipcap2_init_vars-v1-1-08cafe43e20e@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

This driver implements support for temperature monitoring of Astera Labs
PT5161L series PCIe retimer chips.

This driver implementation originates from the CSDK available at
Link: https://github.com/facebook/openbmc/tree/helium/common/recipes-lib/retimer-v2.14
The communication protocol utilized is based on the I2C/SMBus standard.
Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com>
Link: https://lore.kernel.org/r/20240206125420.3884300-2-chou.cosmo@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

The total memory needed for saving per core temperature data depends on
the number of cores in a package. Using static allocated memory wastes
memories on systems with low per package core count.

Improve the code to use dynamic allocated memory so that it can be
improved further when per package core count information becomes
available.

No functional change intended.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-12-rui.zhang@intel.com
[groeck: Fixed continuation line alignment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

temp_data->index saves the index in pdata->core_data[]. It is not used
by package temp_data.

Use temp_data->index as the indicator of package temp_data and remove
redundant temp_data->is_pkg_data.

No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-11-rui.zhang@intel.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Saving package temp_data and core temp_data in one array with different
offsets is fragile.

Split them and clean up crabbed maths and macros. This also fixes a
problem that pdata->core_data[0] was never used.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-10-rui.zhang@intel.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

coretemp driver has an obscure and fragile logic for handling package
and core temperature data.

Place the logic in newly introduced helpers for further optimizations.

No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-9-rui.zhang@intel.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

pdata->cpu_map[] saves the mapping between cpu core id and the index in
pdata->core_data[]. This is used to find the temp_data structure using
cpu_core_id, by traversing the pdata->cpu_map[] array. But the same goal
can be achieved by traversing the pdata->core_temp[] array directly.

Remove redundant pdata->cpu_map[].

No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-8-rui.zhang@intel.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Replace sensor_device_attribute with device_attribute because
sensor_device_attribute->index is no longer used.

No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-7-rui.zhang@intel.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

When sensor_device_attribute pointer is available, use container_of() to
get the temp_data address.

This removes the unnecessary dependency of cached index in
pdata->core_data[].

No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-6-rui.zhang@intel.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Introduce enum coretemp_attr_index to better describe the index of each
sensor attribute.

No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20240202092144.71180-5-rui.zhang@intel.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

This driver exposes hardware sensors of the ASUS ROG RYUJIN II 360
all-in-one CPU liquid cooler, which communicates through a proprietary
USB HID protocol. Report offsets were initially discovered in [1] by
Florian Freudiger.

Available sensors are pump, internal and external
(controller) fan speed in RPM, their duties in PWM, as well as
coolant temperature.

Attaching external fans to the controller is optional and allows them
to be controlled from the device. If not connected, the fan-related
sensors will report zeroes. The controller is a separate hardware unit
that comes bundled with the AIO and connects to it to allow fan control.

The addressable LCD screen is not supported in this
driver and should be controlled through userspace tools.

[1]: https://github.com/liquidctl/liquidctl/pull/653Tested-by: Florian Freudiger <florian.freudiger@proton.me>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20240108094453.22986-1-savicaleksa83@gmail.com
[groeck: Add HID dependency]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

This driver enables hardware monitoring support for NZXT Kraken
X53/X63/X73 and Z53/Z63/Z73 all-in-one CPU liquid coolers.

All models expose liquid temperature and pump speed (in RPM), as well as
PWM control (natively only through a temp-PWM curve, but the driver also
emulates fixed PWM control on top of that). The Z-series models
additionally expose the speed and duty of an optionally connected fan,
with the same PWM control capabilities.

Pump and fan duty control mode can be set through pwm[1-2]_enable,
where 1 is for the manual control mode and 2 is for the liquid temp
to PWM curve mode. Writing a 0 disables control of the channel through
the driver after setting its duty to 100%. As it is not possible to query
the device for the active mode, the driver keeps track of it.

The temperature of the curves relates to the fixed [20-59] C range, per
device limitations, and correlating to the detected liquid temperature.
Only PWM values (ranging from 0-255) can be set.

The addressable RGB LEDs and LCD screen, included only on Z-series models,
are not supported in this driver.
Co-developed-by: Jonas Malaco <jonas@protocubo.io>
Signed-off-by: Jonas Malaco <jonas@protocubo.io>
Co-developed-by: Yury Zhuravlev <stalkerg@gmail.com>
Signed-off-by: Yury Zhuravlev <stalkerg@gmail.com>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20240129111932.368232-1-savicaleksa83@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add dt-bindings for pt5161l temperature monitoring.
Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240115100518.2887549-3-chou.cosmo@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add vendor prefix for Astera Labs, Inc.
https://www.asteralabs.comSigned-off-by: Cosmo Chou <chou.cosmo@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240115100518.2887549-2-chou.cosmo@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

The Amphenol ChipCap 2 is a capacitive polymer humidity and temperature
sensor with an integrated EEPROM and minimum/maximum humidity alarms.

All device variants offer an I2C interface and depending on the part
number, two different output modes:
- CC2D: digital output
- CC2A: analog (PDM) output

This driver adds support for the digital variant (CC2D part numbers),
which includes the following part numbers:
- non-sleep measurement mode (CC2D23, CC2D25, CC2D33, CC2D35)
- sleep measurement mode (CC2D23S, CC2D25S, CC2D33S, CC2D35S)

The Chipcap 2 EEPROM can be accessed to configure a series of parameters
like the minimum/maximum humidity alarm threshold and hysteresis. The
EEPROM is only accessible in the command window after a power-on reset.
The default window lasts 10 ms if no Start_CM command is sent. After the
command window is finished (either after the mentioned timeout of after
a Start_NOM command is sent), the device enters the normal operation
mode and makes a first measurement automatically.

Unfortunately, the device does not provide any hardware or software
reset and therefore the driver must trigger power cycles to enter the
command mode. A dedicated, external regulator is required for that.

This driver keeps the device off until a measurement or access to the
EEPROM is required, making use of the first automatic measurement to
avoid different code paths for sleep and non-sleep devices.

The minimum and maximum humidity alarms are configured with two
registers per alarm: one stores the alarm threshold and the other one
keeps the value that turns off the alarm. The alarm signals are only
updated when a measurement is carried out.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240130-topic-chipcap2-v6-5-260bea05cf9b@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add device tree bindings and an example for the ChipCap 2 humidity
and temperature sensor.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240130-topic-chipcap2-v6-4-260bea05cf9b@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>