- 30 Sep, 2011 16 commits
-
-
Arik Nemtsov authored
Register and implement the TDLS cfg80211 callback functions. Internally prepare and send TDLS management frames. We incorporate local STA capabilities and supported rates with extra IEs given by usermode. The resulting packet is either encapsulated in a data frame, or assembled as an action frame. It is transmitted either directly or through the AP, as mandated by the TDLS specification. Declare support for the TDLS external setup wiphy capability. This tells usermode to handle link setup and discovery on its own, and use the kernel driver for sending TDLS mgmt packets. Signed-off-by: Arik Nemtsov <arik@wizery.com> Cc: Kalyan C Gaddam <chakkal@iit.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Arik Nemtsov authored
Relocate the mesh implementation of adding the (extended) supported rates IE to util.c, anticipating its use by other parts of mac80211. Signed-off-by: Arik Nemtsov <arik@wizery.com> Cc: Kalyan C Gaddam <chakkal@iit.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Arik Nemtsov authored
Add support for sending high-level TDLS commands and TDLS frames via NL80211_CMD_TDLS_OPER and NL80211_CMD_TDLS_MGMT, respectively. Add appropriate cfg80211 callbacks for lower level drivers. Add wiphy capability flags for TDLS support and advertise them via nl80211. Signed-off-by: Arik Nemtsov <arik@wizery.com> Cc: Kalyan C Gaddam <chakkal@iit.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Greg Dietsche authored
both sta and lq_sta are guaranteed to be not null in the calling function so we don't need to check them here. Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Mohammed Shafi Shajakhan authored
ath9k_hw_gpio_get reads the GPIO in/out registers to get the status of GPIO pins, so use PS wrappers Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Currently, when hostapd sets the station as authorized we also overwrite its uAPSD parameter. This obviously leads to buggy behaviour (later, with my patches that actually add uAPSD support). To fix this, only apply those parameters if they were actually set in nl80211, and to achieve that add a bitmap of things to apply. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Yogesh Ashok Powar authored
Making adding and deleting virtual interfaces dynamic. Adding handlers for creating and deleting virtual interface with given name and dev respectively. Also, creating default interface of type station on insmod of the driver. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
"iw dev mlan0 link" shows wrong data rate, because data rate is not sent properly to cfg80211 stack. Also stack is not updated with mcs and Tx data flags information. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
In disconnected state "iw dev mlan0 link" command will return from cfg80211 stack itself. We also have an error check in mwifiex_cfg80211_get_station() routine. Therefore the code under "if (!priv->media_connected)" condition in mwifiex_rate_ioctl_get_rate_value() routine becomes unreachable. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
An extra call to mwifiex_dump_station_info() routine in get_station callback function is redundant Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
Make use of the rx status's is_mybeacon in order to avoid redundant memcmp. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
Fill the ampdu_[ack]_len for both aggregation and normal frames. So that we could avoid unnecesary conditional at tx status. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Lorenzo Bianconi authored
I noticed a possible issue in the max_tp_rate2 management of minstrel_ht. In particular, if we look up just among max_tp_rate2 of each group it will be possible that the selected rate will not be the mcs with second maximum throughput. I wrote this simple patch. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Andy Shevchenko authored
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: "John W. Linville" <linville@tuxdriver.com> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 28 Sep, 2011 1 commit
-
-
git://git.infradead.org/users/linville/wirelessJohn W. Linville authored
Conflicts: drivers/net/wireless/iwlwifi/iwl-scan.c net/wireless/nl80211.c
-
- 27 Sep, 2011 23 commits
-
-
Arik Nemtsov authored
Correct flag usage - use it as a bit index instead of a bit value. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Dan Carpenter authored
wrqu->encoding.length comes from the network administrator. It's size u16. We want to limit "tocopy" to the smallest value of either "len_keys", "wrqu->encoding.length" or 100. But because .length gets cast from u16 to u8 we might use a random, smaller value than the was desired. It's probably not very serious, but we may as well fix it. Btw, this is from code auditing and not from testing. I don't know if this affects anyone in real life. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Eliad Peller authored
save and configure tx param per sdata, rather than per hardware. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Eliad Peller authored
tx params are currently configured per hw, although they should be configured per interface. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
Whenever the scan request or tx_mgmt is requesting not to use CCK rate for managemet frames through NL80211_ATTR_TX_NO_CCK_RATE attribute, then mac80211 should select appropriate least non-CCK rate. This could help to send P2P probes and P2P action frames at non 11b rates without diabling 11b rates globally. Cc: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
Add a new nl80211 attribute to specify whether to send the management frames in CCK rate or not. As of now the wpa_supplicant is disabling CCK rate at P2P init itself. So this patch helps to send P2P probe request/probe response/action frames being sent at non CCK rate in 2GHz without disabling 11b rates. This attribute is used with NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_FRAME commands to disable CCK rate for management frame transmission. Cc: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Dan Carpenter authored
We returned a freed variable on some error paths when the intent was to return a NULL. Part of the reason this was missed was that the code was confusing because it had too many gotos so I removed them and simplified the flow a bit. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
When we cancel a scan, the completion runs only from the workqueue. This can cause the remain-on-channel scan to fail when another one was just canceled, because we're still aborting it. To fix this, run the completion inline with the lock still held before returning from iwl_scan_cancel_timeout(). Also, to avoid the scan complete work from completing a new scan prematurely, add a new STATUS_SCAN_COMPLETE bit. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
To make the next patch easier to read, move the function up, it'll be needed earlier in this file in the next patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
We'll need to be able to run scan complete inline, not from the workqueue, so refactor it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
The return value of iwl_scan_cancel_timeout() isn't used anywhere, so let's just remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Only 5150 series devices report their temperature in Kelvin, and for those we already convert it to Celsius when storing into priv->temperature, so there's no way priv->temperature will ever be in Kelvin. Remove support for this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
When an AP mode interface is added with a DTIM period of two, the slot programming is wrong. Fix it by taking into account the DTIM period. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
If iwl_scan_initiate() fails for any reason, priv->scan_request and priv->scan_vif are left dangling. This can lead to a crash later when iwl_bg_scan_completed() tries to run a pending scan request. In practice, this seems to be very rare due to the STATUS_SCANNING check earlier. That check, however, is wrong -- it should allow a scan to be queued when a reset/roc scan is going on. When a normal scan is already going on, a new one can't be issued by mac80211, so that code can be removed completely. I introduced this bug when adding off-channel support in commit 266af4c7. Cc: stable@kernel.org [3.0] Reported-by: Peng Yan <peng.yan@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Emmanuel Grumbach authored
As everybody knows kcalloc checks the multiplication is safe and that we don't run into overflow. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Emmanuel Grumbach authored
In the current code, the rate scaling isn't fed with statistics from the BA notifications. This is since my patch: iwlagn: reclaim the packets in transport layer Fix that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Wey-Yi Guy authored
Add debugging to show the status of probe in scan notification to help debug probe related issues Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Emmanuel Grumbach authored
Since all the queue logic has been moved to the transport layer, the sequence number is set in the transport layer. While doing that I forgot that the mac header is copied to the TB of the TX cmd in the upper layer before the call to the transport layer. So basically we used the sequence number from mac80211... This was fine for the first assocation but after the second, mac80211 resets its counters while we don't hence a shift that led to terrible impact on performance. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Wey-Yi Guy authored
Change to iwlwifi.git instead of iwlwifi-2.6.git iwlwifi-2.6.git still works for backward compatibility Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Emmanuel Grumbach authored
Since priv->temperature is signed, we cannot use debugfs_create_u32 to refer to it. Use a regular debugfs file instead. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Emmanuel Grumbach authored
Txid was used without being initialized. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
After 'ath9k: optimize ath9k_ps_restore', it would only send the device to network sleep and not to full sleep anymore, potentially causing more battery drain. Reported-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ilan Elias authored
Protect 'cb' and 'cb_context' arguments in nci_data_exchange. In fact, this implements a queue with max length of 1 data exchange transactions in parallel. Signed-off-by: Ilan Elias <ilane@ti.com> Acked-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-