Skip to content

L
linux
Switch branch/tag
  1. 26 Apr, 2022 3 commits
  3. 25 Apr, 2022 19 commits
  5. 23 Apr, 2022 18 commits
    • David S. Miller's avatar
      Merge branch 'dsa-selftests' · cfc1d91a
      David S. Miller authored 
      Vladimir Oltean says:

====================
DSA selftests

When working on complex new features or reworks it becomes increasingly
difficult to ensure there aren't regressions being introduced, and
therefore it would be nice if we could go over the functionality we
already have and write some tests for it.

Verbally I know from Tobias Waldekranz that he has been working on some
selftests for DSA, yet I have never seen them, so here I am adding some
tests I have written which have been useful for me. The list is by no
means complete (it only covers elementary functionality), but it's still
good to have as a starting point. I also borrowed some refactoring
changes from Joachim Wiberg that he submitted for his "net: bridge:
forwarding of unknown IPv4/IPv6/MAC BUM traffic" series, but not the
entirety of his selftests. I now think that his selftests have some
overlap with bridge_vlan_unaware.sh and bridge_vlan_aware.sh and they
should be more tightly integrated with each other - yet I didn't do that
either :). Another issue I had with his selftests was that they jumped
straight ahead to configure brport flags on br0 (a radical new idea
still at RFC status) while we have bigger problems, and we don't have
nearly enough coverage for the *existing* functionality.

One idea introduced here which I haven't seen before is the symlinking
of relevant forwarding selftests to the selftests/drivers/net/<my-driver>/
folder, plus a forwarding.config file. I think there's some value in
having things structured this way, since the forwarding dir has so many
selftests that aren't relevant to DSA that it is a bit difficult to find
the ones that are.

While searching for applications that I could use for multicast testing
(not my domain of interest/knowledge really), I found Joachim Wiberg's
mtools, mcjoin and omping, and I tried them all with various degrees of
success. In particular, I was going to use mcjoin, but I faced some
issues getting IPv6 multicast traffic to work in a VRF, and I bothered
David Ahern about it here:
https://lore.kernel.org/netdev/97eaffb8-2125-834e-641f-c99c097b6ee2@gmail.com/t/
It seems that the problem is that this application should use
SO_BINDTODEVICE, yet it doesn't.

So I ended up patching the bare-bones mtools (msend, mreceive) forked by
Joachim from the University of Virginia's Multimedia Networks Group to
include IPv6 support, and to use SO_BINDTODEVICE. This is what I'm using
now for IPv6.

Note that mausezahn doesn't appear to do a particularly good job of
supporting IPv6 really, and I needed a program to emit the actual
IP_ADD_MEMBERSHIP calls, for dev_mc_add(), so I could test RX filtering.
Crafting the IGMP/MLD reports by hand doesn't really do the trick.
While extremely bare-bones, the mreceive application now seems to do
what I need it to.

Feedback appreciated, it is very likely that I could have done things in
a better way.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cfc1d91a
    • Vladimir Oltean's avatar
      selftests: drivers: dsa: add a subset of forwarding selftests · 07c8a2dd
      Vladimir Oltean authored 
      This adds an initial subset of forwarding selftests which I considered
to be relevant for DSA drivers, along with a forwarding.config that
makes it easier to run them (disables veth pair creation, makes sure MAC
addresses are unique and stable).

The intention is to request driver writers to run these selftests during
review and make sure that the tests pass, or at least that the problems
are known.
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      07c8a2dd
    • Vladimir Oltean's avatar
      selftests: forwarding: add a test for local_termination.sh · 90b9566a
      Vladimir Oltean authored 
      This tests the capability of switch ports to filter out undesired
traffic. Different drivers are expected to have different capabilities
here (so some may fail and some may pass), yet the test still has some
value, for example to check for regressions.

There are 2 kinds of failures, one is when a packet which should have
been accepted isn't (and that should be fixed), and the other "failure"
(as reported by the test) is when a packet could have been filtered out
(for being unnecessary) yet it was received.

The bridge driver fares particularly badly at this test:

TEST: br0: Unicast IPv4 to primary MAC address                      [ OK ]
TEST: br0: Unicast IPv4 to macvlan MAC address                      [ OK ]
TEST: br0: Unicast IPv4 to unknown MAC address                      [FAIL]
        reception succeeded, but should have failed
TEST: br0: Unicast IPv4 to unknown MAC address, promisc             [ OK ]
TEST: br0: Unicast IPv4 to unknown MAC address, allmulti            [FAIL]
        reception succeeded, but should have failed
TEST: br0: Multicast IPv4 to joined group                           [ OK ]
TEST: br0: Multicast IPv4 to unknown group                          [FAIL]
        reception succeeded, but should have failed
TEST: br0: Multicast IPv4 to unknown group, promisc                 [ OK ]
TEST: br0: Multicast IPv4 to unknown group, allmulti                [ OK ]
TEST: br0: Multicast IPv6 to joined group                           [ OK ]
TEST: br0: Multicast IPv6 to unknown group                          [FAIL]
        reception succeeded, but should have failed
TEST: br0: Multicast IPv6 to unknown group, promisc                 [ OK ]
TEST: br0: Multicast IPv6 to unknown group, allmulti                [ OK ]

mainly because it does not implement IFF_UNICAST_FLT. Yet I still think
having the test (with the failures) is useful in case somebody wants to
tackle that problem in the future, to make an easy before-and-after
comparison.
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      90b9566a
    • Vladimir Oltean's avatar
      selftests: forwarding: add a no_forwarding.sh test · 476a4f05
      Vladimir Oltean authored 
      Bombard a standalone switch port with various kinds of traffic to ensure
it is really standalone and doesn't leak packets to other switch ports.
Also check for switch ports in different bridges, and switch ports in a
VLAN-aware bridge but having different pvids. No forwarding should take
place in either case.
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      476a4f05
    • Vladimir Oltean's avatar
      selftests: forwarding: add helper for retrieving IPv6 link-local address of interface · a5114df6
      Vladimir Oltean authored 
      Pinging an IPv6 link-local multicast address selects the link-local
unicast address of the interface as source, and we'd like to monitor for
that in tcpdump.

Add a helper to the forwarding library which retrieves the link-local
IPv6 address of an interface, to make that task easier.
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a5114df6
    • Vladimir Oltean's avatar
      selftests: forwarding: add helpers for IP multicast group joins/leaves · f23cddc7
      Vladimir Oltean authored 
      Extend the forwarding library with calls to some small C programs which
join an IP multicast group and send some packets to it. Both IPv4 and
IPv6 groups are supported. Use cases range from testing IGMP/MLD
snooping, to RX filtering, to multicast routing.

Testing multicast traffic using msend/mreceive is intended to be done
using tcpdump.
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f23cddc7
    • Joachim Wiberg's avatar
      selftests: forwarding: multiple instances in tcpdump helper · 6182c5c5
      Joachim Wiberg authored 
      Extend tcpdump_start() & C:o to handle multiple instances.  Useful when
observing bridge operation, e.g., unicast learning/flooding, and any
case of multicast distribution (to these ports but not that one ...).

This means the interface argument is now a mandatory argument to all
tcpdump_*() functions, hence the changes to the ocelot flower test.
Signed-off-by: default avatarJoachim Wiberg <troglobit@gmail.com>
Reviewed-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6182c5c5
    • Joachim Wiberg's avatar
      selftests: forwarding: add TCPDUMP_EXTRA_FLAGS to lib.sh · fe32dffd
      Joachim Wiberg authored 
      For some use-cases we may want to change the tcpdump flags used in
tcpdump_start().  For instance, observing interfaces without the PROMISC
flag, e.g. to see what's really being forwarded to the bridge interface.
Signed-off-by: default avatarJoachim Wiberg <troglobit@gmail.com>
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fe32dffd
    • Vladimir Oltean's avatar
      selftests: forwarding: add option to run tests with stable MAC addresses · b343734e
      Vladimir Oltean authored 
      By default, DSA switch ports inherit their MAC address from the DSA
master.

This works well for practical situations, but some selftests like
bridge_vlan_unaware.sh loop back 2 standalone DSA ports with 2 bridged
DSA ports, and require the bridge to forward packets between the
standalone ports.

Due to the bridge seeing that the MAC DA it needs to forward is present
as a local FDB entry (it coincides with the MAC address of the bridge
ports), the test packets are not forwarded, but terminated locally on
br0. In turn, this makes the ping and ping6 tests fail.

Address this by introducing an option to have stable MAC addresses.
When mac_addr_prepare is called, the current addresses of the netifs are
saved and replaced with 00:01:02:03:04:${netif number}. Then when
mac_addr_restore is called at the end of the test, the original MAC
addresses are restored. This ensures that the MAC addresses are unique,
which makes the test pass even for DSA ports.

The usage model is for the behavior to be opt-in via STABLE_MAC_ADDRS,
which DSA should set to true, all others behave as before. By hooking
the calls to mac_addr_prepare and mac_addr_restore within the forwarding
lib itself, we do not need to patch each individual selftest, the only
requirement is that pre_cleanup is called.
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b343734e
    • David S. Miller's avatar
      Merge branch 'mptcp-tcp-fallback' · 988998ac
      David S. Miller authored 
      Mat Martineau says:

====================
mptcp: TCP fallback for established connections

RFC 8684 allows some MPTCP connections to fall back to regular TCP when
the MPTCP DSS checksum detects middlebox interference, there is only a
single subflow, and there is no unacknowledged out-of-sequence
data. When this condition is detected, the stack sends a MPTCP DSS
option with an "infinite mapping" to signal that a fallback is
happening, and the peers will stop sending MPTCP options in their TCP
headers. The Linux MPTCP stack has not yet supported this type of
fallback, instead closing the connection when the MPTCP checksum fails.

This series adds support for fallback to regular TCP in a more limited
scenario, for only MPTCP connections that have never connected
additional subflows or transmitted out-of-sequence data. The selftests
are also updated to check new MIBs that track infinite mappings.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      988998ac
    • Geliang Tang's avatar
      selftests: mptcp: add infinite map mibs check · 8bd03be3
      Geliang Tang authored 
      This patch adds a function chk_infi_nr() to check the mibs for the
infinite mapping. Invoke it in chk_join_nr() when validate_checksum
is set.
Signed-off-by: default avatarGeliang Tang <geliang.tang@suse.com>
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8bd03be3
    • Geliang Tang's avatar
      mptcp: dump infinite_map field in mptcp_dump_mpext · d9fdd02d
      Geliang Tang authored 
      In trace event class mptcp_dump_mpext, dump the newly added infinite_map
field of struct mptcp_dump_mpext too.
Signed-off-by: default avatarGeliang Tang <geliang.tang@suse.com>
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d9fdd02d
    • Geliang Tang's avatar
      mptcp: add mib for infinite map sending · 104125b8
      Geliang Tang authored 
      This patch adds a new mib named MPTCP_MIB_INFINITEMAPTX, increase it
when a infinite mapping has been sent out.
Signed-off-by: default avatarGeliang Tang <geliang.tang@suse.com>
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      104125b8
    • Geliang Tang's avatar
      mptcp: infinite mapping receiving · f8d4bcac
      Geliang Tang authored 
      This patch adds the infinite mapping receiving logic. When the infinite
mapping is received, set the map_data_len of the subflow to 0.

In subflow_check_data_avail(), only reset the subflow when the map_data_len
of the subflow is non-zero.
Suggested-by: default avatarPaolo Abeni <pabeni@redhat.com>
Signed-off-by: default avatarGeliang Tang <geliang.tang@suse.com>
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f8d4bcac
    • Geliang Tang's avatar
      mptcp: infinite mapping sending · 1e39e5a3
      Geliang Tang authored 
      This patch adds the infinite mapping sending logic.

Add a new flag send_infinite_map in struct mptcp_subflow_context. Set
it true when a single contiguous subflow is in use and the
allow_infinite_fallback flag is true in mptcp_pm_mp_fail_received().

In mptcp_sendmsg_frag(), if this flag is true, call the new function
mptcp_update_infinite_map() to set the infinite mapping.

Add a new flag infinite_map in struct mptcp_ext, set it true in
mptcp_update_infinite_map(), and check this flag in a new helper
mptcp_check_infinite_map().

In mptcp_update_infinite_map(), set data_len to 0, and clear the
send_infinite_map flag, then do fallback.

In mptcp_established_options(), use the helper mptcp_check_infinite_map()
to let the infinite mapping DSS can be sent out in the fallback mode.
Suggested-by: default avatarPaolo Abeni <pabeni@redhat.com>
Signed-off-by: default avatarGeliang Tang <geliang.tang@suse.com>
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1e39e5a3
    • Geliang Tang's avatar
      mptcp: track and update contiguous data status · 0530020a
      Geliang Tang authored 
      This patch adds a new member allow_infinite_fallback in mptcp_sock,
which is initialized to 'true' when the connection begins and is set
to 'false' on any retransmit or successful MP_JOIN. Only do infinite
mapping fallback if there is a single subflow AND there have been no
retransmissions AND there have never been any MP_JOINs.
Suggested-by: default avatarPaolo Abeni <pabeni@redhat.com>
Signed-off-by: default avatarGeliang Tang <geliang.tang@suse.com>
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0530020a
    • Geliang Tang's avatar
      mptcp: add the fallback check · 0348c690
      Geliang Tang authored 
      This patch adds the fallback check in subflow_check_data_avail(). Only
do the fallback when the msk hasn't fallen back yet.
Suggested-by: default avatarPaolo Abeni <pabeni@redhat.com>
Signed-off-by: default avatarGeliang Tang <geliang.tang@suse.com>
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0348c690
    • Geliang Tang's avatar
      mptcp: don't send RST for single subflow · 1761fed2
      Geliang Tang authored 
      When a bad checksum is detected and a single subflow is in use, don't
send RST + MP_FAIL, send data_ack + MP_FAIL instead.

So invoke tcp_send_active_reset() only when mptcp_has_another_subflow()
is true.
Signed-off-by: default avatarGeliang Tang <geliang.tang@suse.com>
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1761fed2
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7