Fix kconfig dependency warning to satisfy dependencies:

warning: (MLX4_EN && NETDEVICES && NETDEV_10000 && PCI && INET || MLX4_INFINIBAND && INFINIBAND) selects MLX4_CORE which has unmet direct dependencies (NETDEVICES && NETDEV_10000 && PCI)
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These tables only contain function pointers.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: David S. Miller <davem@davemloft.net>

Do some cleanups of TIPC based on make namespacecheck
  1. Don't export unused symbols
  2. Eliminate dead code
  3. Make functions and variables local
  4. Rename buf_acquire to tipc_buf_acquire since it is used in several files

Compile tested only.
This make break out of tree kernel modules that depend on TIPC routines.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Full duplex only. Half duplex 1000 Mbps is not supported.
Signed-off-by: David Lv <DavidLv@viatech.com.cn>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Seguier Regis <rseguier@e-teleport.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

While doing profile analysis, I found fib_hash_table was sometime in a
cache line shared by a possibly often written kernel structure.

(CONFIG_IP_ROUTE_MULTIPATH || !CONFIG_IPV6_MULTIPLE_TABLES)

It's hard to detect because not easily reproductible.

Make sure we allocate a full cache line to keep this shared in all cpus
caches.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fib_table_lookup() might use fls() to speedup an open coded loop.

Noticed while doing a profile analysis.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fib_nl_delrule() calls synchronize_rcu() for no apparent reason,
while rtnl is held.

I suspect it was done to avoid an atomic_inc_not_zero() in
fib_rules_lookup(), which commit 7fa7cb71 added anyway.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Avoid two atomic ops on found rule in fib6_rule_lookup()
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add ethtool stats support.
Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There were no curly braces in this if condition so it always enabled full
duplex.

And ecmd->speed is an unsigned short so it is never equal to -1.  The
effect is that mii_ethtool_sset() fails with -EINVAL and an error is
printed to dmesg.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Their doesn't appear to be bugs with the endianness handling here, just get the
annotations right to keep sparse happy.

Suppresses the following sparse warnings:
drivers/net/dnet.c:30:5: warning: symbol 'dnet_readw_mac' was not declared. Should it be static?
drivers/net/dnet.c:49:6: warning: symbol 'dnet_writew_mac' was not declared. Should it be static?
drivers/net/dnet.c:364:5: warning: symbol 'dnet_phy_marvell_fixup' was not declared. Should it be static?
drivers/net/dnet.c:66:13: warning: incorrect type in assignment (different base types)
drivers/net/dnet.c:66:13:    expected unsigned short [unsigned] [usertype] tmp
drivers/net/dnet.c:66:13:    got restricted __be16 [usertype] <noident>
drivers/net/dnet.c:68:13: warning: incorrect type in assignment (different base types)
drivers/net/dnet.c:68:13:    expected unsigned short [unsigned] [usertype] tmp
drivers/net/dnet.c:68:13:    got restricted __be16 [usertype] <noident>
drivers/net/dnet.c:70:13: warning: incorrect type in assignment (different base types)
drivers/net/dnet.c:70:13:    expected unsigned short [unsigned] [usertype] tmp
drivers/net/dnet.c:70:13:    got restricted __be16 [usertype] <noident>
drivers/net/dnet.c:92:27: warning: cast to restricted __be16
drivers/net/dnet.c:94:33: warning: cast to restricted __be16
drivers/net/dnet.c:96:33: warning: cast to restricted __be16
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Single bit signed bitfields don't make a lot of sense, noticed by sparse:
drivers/net/cxgb4vf/t4vf_common.h:135:31: error: dubious one-bit signed bitfield
drivers/net/cxgb4vf/t4vf_common.h:136:36: error: dubious one-bit signed bitfield
drivers/net/cxgb4vf/t4vf_common.h:137:36: error: dubious one-bit signed bitfield
drivers/net/cxgb4vf/t4vf_common.h:138:36: error: dubious one-bit signed bitfield
drivers/net/cxgb4vf/t4vf_common.h:139:36: error: dubious one-bit signed bitfield
drivers/net/cxgb4vf/t4vf_common.h:140:31: error: dubious one-bit signed bitfield
drivers/net/cxgb4vf/t4vf_common.h:141:31: error: dubious one-bit signed bitfield
drivers/net/cxgb4vf/t4vf_common.h:142:35: error: dubious one-bit signed bitfield
drivers/net/cxgb4vf/t4vf_common.h:143:35: error: dubious one-bit signed bitfield
drivers/net/cxgb4vf/t4vf_common.h:154:27: error: dubious one-bit signed bitfield
drivers/net/cxgb4vf/t4vf_common.h:155:26: error: dubious one-bit signed bitfield
drivers/net/cxgb4vf/t4vf_common.h:156:27: error: dubious one-bit signed bitfield
drivers/net/cxgb4vf/t4vf_common.h:157:26: error: dubious one-bit signed bitfield
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit b30973f8 (node-aware skb allocation) spread a wrong habit of
allocating net drivers skbs on a given memory node : The one closest to
the NIC hardware. This is wrong because as soon as we try to scale
network stack, we need to use many cpus to handle traffic and hit
slub/slab management on cross-node allocations/frees when these cpus
have to alloc/free skbs bound to a central node.

skb allocated in RX path are ephemeral, they have a very short
lifetime : Extra cost to maintain NUMA affinity is too expensive. What
appeared as a nice idea four years ago is in fact a bad one.

In 2010, NIC hardwares are multiqueue, or we use RPS to spread the load,
and two 10Gb NIC might deliver more than 28 million packets per second,
needing all the available cpus.

Cost of cross-node handling in network and vm stacks outperforms the
small benefit hardware had when doing its DMA transfert in its 'local'
memory node at RX time. Even trying to differentiate the two allocations
done for one skb (the sk_buff on local node, the data part on NIC
hardware node) is not enough to bring good performance.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using standard skb allocations in r8169 leads to order-3 allocations (if
PAGE_SIZE=4096), because NIC needs 16383 bytes, and skb overhead makes
this bigger than 16384 -> 32768 bytes per "skb"

Using kmalloc() permits to reduce memory requirements of one r8169 nic
by 4Mbytes. (256 frames * 16Kbytes). This is fine since a hardware bug
requires us to copy incoming frames, so we build real skb when doing
this copy.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove a DCB check config from DCB configuration we
continue to configure DCB even if it fails so don't
even bother to check.  Plus user space (lldpad) checks
this before programming the hw anyways.

Worse case is we program some values into the hw that
don't make total sense resulting in incorrect bandwidth
allocation.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Following patch fixes warnings reported by `make namespacecheck`

Reported by Stephen Hemminger

CC: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove functions that are declared, but not used in the driver.
This patch fixes warnings reported by `make namespacecheck`

Reported by Stephen Hemminger

CC: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add new interrupt ack functions and other hardware interface logic to
support the new device.

Update version to 2.2.6.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During cnic shutdown, the original driver code requires userspace to
close the uio device within a few seconds.  This doesn't always happen
as the userapp may be hung or otherwise take a long time to close.  The
system may crash when this happens.

We fix the problem by decoupling the uio structures from the cnic
structures during cnic shutdown.  We do not unregister the uio device
until the cnic driver is unloaded.  This eliminates the unreliable wait
loop for uio to close.

All uio structures are kept in a linked list.  If the device is shutdown
and later brought back up again, the uio strcture will be found in the
linked list and coupled back to the cnic structures.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

and put all uio related structures and ring buffers in it.  This allows
uio operations to be done independent of the cnic device structures.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

to free all UIO related structures.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The bnx2x devices require a 2 second quiet time before sending the last
RAMROD command to destroy a connection.  This sleep wait adds up to a
long delay when iscsid is serially destroying maultiple connections.

Create a workqueue to perform the final connection cleanup in the
background to speed up the process.  This significantly speeds up the
process as the wait time can be done in parallel for multiple connections.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Refactoring code for the next patch to defer connection clean up.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

so that we can additional bit definitions without requiring a spinlock.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

to reduce some duplicate code.  Also, use tasklet_kill() in
cnic_free_irq() to wait for the cnic_irq_task to complete.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Updates to Phonet doc for Pipe controller 'connect' socket
implementation and changes related to socket options.
Signed-off-by: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Based on suggestion by Rémi Denis-Courmont to implement 'connect'
for Pipe controller logic,  this patch implements 'connect' socket
call for the Pipe controller logic.
The patch does following:-
- Removes setsockopts for PNPIPE_CREATE and PNPIPE_DESTROY
- Adds setsockopt for setting the Pipe handle value
- Implements connect socket call
- Updates the Pipe controller logic

User-space should now follow below sequence with Pipe controller:-
-socket
-bind
-setsockopt for PNPIPE_PIPE_HANDLE
-connect
-setsockopt for PNPIPE_ENCAP_IP
-setsockopt for PNPIPE_ENABLE

GPRS/3G data has been tested working fine with this.
Signed-off-by: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
Acked-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove all instances of legacy, or as yet to be implemented code
that is currently living within an #if 0 ... #endif block.
In the rare instance that some of it be needed in the future,
it can still be dragged out of history, but there is no need
for it to sit in mainline.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reported-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We tried very hard to remove all possible dev_hold()/dev_put() pairs in
network stack, using RCU conversions.

There is still an unavoidable device refcount change for every dst we
create/destroy, and this can slow down some workloads (routers or some
app servers, mmap af_packet)

We can switch to a percpu refcount implementation, now dynamic per_cpu
infrastructure is mature. On a 64 cpus machine, this consumes 256 bytes
per device.

On x86, dev_hold(dev) code :

before
        lock    incl 0x280(%ebx)
after:
        movl    0x260(%ebx),%eax
        incl    fs:(%eax)

Stress bench :

(Sending 160.000.000 UDP frames,
IP route cache disabled, dual E5540 @2.53GHz,
32bit kernel, FIB_TRIE)

Before:

real    1m1.662s
user    0m14.373s
sys     12m55.960s

After:

real    0m51.179s
user    0m15.329s
sys     10m15.942s
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This  omits the redundant "DCCP:" in warning messages, since DCCP_WARN() already
echoes the function name, avoiding messages like

   kernel: [10988.766503] dccp_close: DCCP: ABORT -- 209 bytes unread
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>

This schedules an Ack when receiving a timestamp, exploiting the
existing inet_csk_schedule_ack() function, saving one case in the
`dccp_ack_pending()' function.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>

This patch generalises the task of determining data loss from RFC 4340, 7.7.1.

Let S_A, S_B be sequence numbers such that S_B is "after" S_A, and let
N_B be the NDP count of packet S_B. Then, using modulo-2^48 arithmetic,
 D = S_B - S_A - 1  is an upper bound of the number of lost data packets,
 D - N_B            is an approximation of the number of lost data packets
                    (there are cases where this is not exact).

The patch implements this as
 dccp_loss_count(S_A, S_B, N_B) := max(S_B - S_A - 1 - N_B, 0)
Signed-off-by: Ivo Calado <ivocalado@embedded.ufcg.edu.br>
Signed-off-by: Erivaldo Xavier <desadoc@gmail.com>
Signed-off-by: Leandro Sales <leandroal@gmail.com>
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>

This removes the argument `more' from ccid_hc_tx_packet_sent, since it was
nowhere used in the entire code.

(Btw, this argument was not even used in the original KAME code where the
 function initially came from; compare the variable moreToSend in the
 freebsd61-dccp-kame-28.08.2006.patch kept by Emmanuel Lochin.)
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>

After moving the assignment of GAR/ISS from dccp_connect_init() to
dccp_transmit_skb(), the former function becomes very small, so that
a merger with dccp_connect() suggests itself.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>

This fixes a problem and a potential loophole with regard to seqno/ackno
validity: currently the initial adjustments to AWL/SWL are only performed
once at the begin of the connection, during the handshake.

Since the Sequence Window feature is always greater than Wmin=32 (7.5.2),
it is however necessary to perform these adjustments at least for the first
W/W' (variables as per 7.5.1) packets in the lifetime of a connection.

This requirement is complicated by the fact that W/W' can change at any time
during the lifetime of a connection.

Therefore it is better to perform that safety check each time SWL/AWL are
updated, as implemented by the patch.

A second problem solved by this patch is that the remote/local Sequence Window
feature values (which set the bounds for AWL/SWL/SWH) are undefined until the
feature negotiation has completed.

During the initial handshake we have more stringent sequence number protection;
the changes added by this patch effect that {A,S}W{L,H} are within the correct
bounds at the instant that feature negotiation completes (since the SeqWin
feature activation handlers call dccp_update_gsr/gss()).
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>