- 24 Oct, 2023 13 commits
-
-
Joao Martins authored
Expand mock_domain test to be able to manipulate the device capabilities. This allows testing with mockdev without dirty tracking support advertised and thus make sure enforce_dirty test does the expected. To avoid breaking IOMMUFD_TEST UABI replicate the mock_domain struct and thus add an input dev_flags at the end. Link: https://lore.kernel.org/r/20231024135109.73787-14-joao.m.martins@oracle.comSigned-off-by:
Joao Martins <joao.m.martins@oracle.com> Reviewed-by:
Kevin Tian <kevin.tian@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com>
-
Joao Martins authored
IOMMU advertises Access/Dirty bits for second-stage page table if the extended capability DMAR register reports it (ECAP, mnemonic ECAP.SSADS). The first stage table is compatible with CPU page table thus A/D bits are implicitly supported. Relevant Intel IOMMU SDM ref for first stage table "3.6.2 Accessed, Extended Accessed, and Dirty Flags" and second stage table "3.7.2 Accessed and Dirty Flags". First stage page table is enabled by default so it's allowed to set dirty tracking and no control bits needed, it just returns 0. To use SSADS, set bit 9 (SSADE) in the scalable-mode PASID table entry and flush the IOTLB via pasid_flush_caches() following the manual. Relevant SDM refs: "3.7.2 Accessed and Dirty Flags" "6.5.3.3 Guidance to Software for Invalidations, Table 23. Guidance to Software for Invalidations" PTE dirty bit is located in bit 9 and it's cached in the IOTLB so flush IOTLB to make sure IOMMU attempts to set the dirty bit again. Note that iommu_dirty_bitmap_record() will add the IOVA to iotlb_gather and thus the caller of the iommu op will flush the IOTLB. Relevant manuals over the hardware translation is chapter 6 with some special mention to: "6.2.3.1 Scalable-Mode PASID-Table Entry Programming Considerations" "6.2.4 IOTLB" Select IOMMUFD_DRIVER only if IOMMUFD is enabled, given that IOMMU dirty tracking requires IOMMUFD. Link: https://lore.kernel.org/r/20231024135109.73787-13-joao.m.martins@oracle.comSigned-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by:
-
Joao Martins authored
IOMMU advertises Access/Dirty bits if the extended feature register reports it. Relevant AMD IOMMU SDM ref[0] "1.3.8 Enhanced Support for Access and Dirty Bits" To enable it set the DTE flag in bits 7 and 8 to enable access, or access+dirty. With that, the IOMMU starts marking the D and A flags on every Memory Request or ATS translation request. It is on the VMM side to steer whether to enable dirty tracking or not, rather than wrongly doing in IOMMU. Relevant AMD IOMMU SDM ref [0], "Table 7. Device Table Entry (DTE) Field Definitions" particularly the entry "HAD". To actually toggle on and off it's relatively simple as it's setting 2 bits on DTE and flush the device DTE cache. To get what's dirtied use existing AMD io-pgtable support, by walking the pagetables over each IOVA, with fetch_pte(). The IOTLB flushing is left to the caller (much like unmap), and iommu_dirty_bitmap_record() is the one adding page-ranges to invalidate. This allows caller to batch the flush over a big span of IOVA space, without the iommu wondering about when to flush. Worthwhile sections from AMD IOMMU SDM: "2.2.3.1 Host Access Support" "2.2.3.2 Host Dirty Support" For details on how IOMMU hardware updates the dirty bit see, and expects from its consequent clearing by CPU: "2.2.7.4 Updating Accessed and Dirty Bits in the Guest Address Tables" "2.2.7.5 Clearing Accessed and Dirty Bits" Quoting the SDM: "The setting of accessed and dirty status bits in the page tables is visible to both the CPU and the peripheral when sharing guest page tables. The IOMMU interlocked operations to update A and D bits must be 64-bit operations and naturally aligned on a 64-bit boundary" .. and for the IOMMU update sequence to Dirty bit, essentially is states: 1. Decodes the read and write intent from the memory access. 2. If P=0 in the page descriptor, fail the access. 3. Compare the A & D bits in the descriptor with the read and write intent in the request. 4. If the A or D bits need to be updated in the descriptor: * Start atomic operation. * Read the descriptor as a 64-bit access. * If the descriptor no longer appears to require an update, release the atomic lock with no further action and continue to step 5. * Calculate the new A & D bits. * Write the descriptor as a 64-bit access. * End atomic operation. 5. Continue to the next stage of translation or to the memory access. Access/Dirty bits readout also need to consider the non-default page-sizes (aka replicated PTEs as mentined by manual), as AMD supports all powers of two (except 512G) page sizes. Select IOMMUFD_DRIVER only if IOMMUFD is enabled considering that IOMMU dirty tracking requires IOMMUFD. Link: https://lore.kernel.org/r/20231024135109.73787-12-joao.m.martins@oracle.comSigned-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by:
-
Joao Martins authored
Add the domain_alloc_user op implementation. To that end, refactor amd_iommu_domain_alloc() to receive a dev pointer and flags, while renaming it too, such that it becomes a common function shared with domain_alloc_user() implementation. The sole difference with domain_alloc_user() is that we initialize also other fields that iommu_domain_alloc() does. It lets it return the iommu domain correctly initialized in one function. This is in preparation to add dirty enforcement on AMD implementation of domain_alloc_user. Link: https://lore.kernel.org/r/20231024135109.73787-11-joao.m.martins@oracle.comSigned-off-by:
-
Joao Martins authored
VFIO has an operation where it unmaps an IOVA while returning a bitmap with the dirty data. In reality the operation doesn't quite query the IO pagetables that the PTE was dirty or not. Instead it marks as dirty on anything that was mapped, and doing so in one syscall. In IOMMUFD the equivalent is done in two operations by querying with GET_DIRTY_IOVA followed by UNMAP_IOVA. However, this would incur two TLB flushes given that after clearing dirty bits IOMMU implementations require invalidating their IOTLB, plus another invalidation needed for the UNMAP. To allow dirty bits to be queried faster, add a flag (IOMMU_HWPT_GET_DIRTY_BITMAP_NO_CLEAR) that requests to not clear the dirty bits from the PTE (but just reading them), under the expectation that the next operation is the unmap. An alternative is to unmap and just perpectually mark as dirty as that's the same behaviour as today. So here equivalent functionally can be provided with unmap alone, and if real dirty info is required it will amortize the cost while querying. There's still a race against DMA where in theory the unmap of the IOVA (when the guest invalidates the IOTLB via emulated iommu) would race against the VF performing DMA on the same IOVA. As discussed in [0], we are accepting to resolve this race as throwing away the DMA and it doesn't matter if it hit physical DRAM or not, the VM can't tell if we threw it away because the DMA was blocked or because we failed to copy the DRAM. [0] https://lore.kernel.org/linux-iommu/20220502185239.GR8364@nvidia.com/ Link: https://lore.kernel.org/r/20231024135109.73787-10-joao.m.martins@oracle.comSigned-off-by:
-
Joao Martins authored
Extend IOMMUFD_CMD_GET_HW_INFO op to query generic iommu capabilities for a given device. Capabilities are IOMMU agnostic and use device_iommu_capable() API passing one of the IOMMU_CAP_*. Enumerate IOMMU_CAP_DIRTY_TRACKING for now in the out_capabilities field returned back to userspace. Link: https://lore.kernel.org/r/20231024135109.73787-9-joao.m.martins@oracle.comSigned-off-by:
-
Joao Martins authored
Connect a hw_pagetable to the IOMMU core dirty tracking read_and_clear_dirty iommu domain op. It exposes all of the functionality for the UAPI that read the dirtied IOVAs while clearing the Dirty bits from the PTEs. In doing so, add an IO pagetable API iopt_read_and_clear_dirty_data() that performs the reading of dirty IOPTEs for a given IOVA range and then copying back to userspace bitmap. Underneath it uses the IOMMU domain kernel API which will read the dirty bits, as well as atomically clearing the IOPTE dirty bit and flushing the IOTLB at the end. The IOVA bitmaps usage takes care of the iteration of the bitmaps user pages efficiently and without copies. Within the iterator function we iterate over io-pagetable contigous areas that have been mapped. Contrary to past incantation of a similar interface in VFIO the IOVA range to be scanned is tied in to the bitmap size, thus the application needs to pass a appropriately sized bitmap address taking into account the iova range being passed *and* page size ... as opposed to allowing bitmap-iova != iova. Link: https://lore.kernel.org/r/20231024135109.73787-8-joao.m.martins@oracle.comSigned-off-by:
-
Joao Martins authored
Every IOMMU driver should be able to implement the needed iommu domain ops to control dirty tracking. Connect a hw_pagetable to the IOMMU core dirty tracking ops, specifically the ability to enable/disable dirty tracking on an IOMMU domain (hw_pagetable id). To that end add an io_pagetable kernel API to toggle dirty tracking: * iopt_set_dirty_tracking(iopt, [domain], state) The intended caller of this is via the hw_pagetable object that is created. Internally it will ensure the leftover dirty state is cleared /right before/ dirty tracking starts. This is also useful for iommu drivers which may decide that dirty tracking is always-enabled at boot without wanting to toggle dynamically via corresponding iommu domain op. Link: https://lore.kernel.org/r/20231024135109.73787-7-joao.m.martins@oracle.comSigned-off-by:
-
Joao Martins authored
Throughout IOMMU domain lifetime that wants to use dirty tracking, some guarantees are needed such that any device attached to the iommu_domain supports dirty tracking. The idea is to handle a case where IOMMU in the system are assymetric feature-wise and thus the capability may not be supported for all devices. The enforcement is done by adding a flag into HWPT_ALLOC namely: IOMMU_HWPT_ALLOC_DIRTY_TRACKING .. Passed in HWPT_ALLOC ioctl() flags. The enforcement is done by creating a iommu_domain via domain_alloc_user() and validating the requested flags with what the device IOMMU supports (and failing accordingly) advertised). Advertising the new IOMMU domain feature flag requires that the individual iommu driver capability is supported when a future device attachment happens. Link: https://lore.kernel.org/r/20231024135109.73787-6-joao.m.martins@oracle.comSigned-off-by:
-
Joao Martins authored
Add to iommu domain operations a set of callbacks to perform dirty tracking, particulary to start and stop tracking and to read and clear the dirty data. Drivers are generally expected to dynamically change its translation structures to toggle the tracking and flush some form of control state structure that stands in the IOVA translation path. Though it's not mandatory, as drivers can also enable dirty tracking at boot, and just clear the dirty bits before setting dirty tracking. For each of the newly added IOMMU core APIs: iommu_cap::IOMMU_CAP_DIRTY_TRACKING: new device iommu_capable value when probing for capabilities of the device. .set_dirty_tracking(): an iommu driver is expected to change its translation structures and enable dirty tracking for the devices in the iommu_domain. For drivers making dirty tracking always-enabled, it should just return 0. .read_and_clear_dirty(): an iommu driver is expected to walk the pagetables for the iova range passed in and use iommu_dirty_bitmap_record() to record dirty info per IOVA. When detecting that a given IOVA is dirty it should also clear its dirty state from the PTE, *unless* the flag IOMMU_DIRTY_NO_CLEAR is passed in -- flushing is steered from the caller of the domain_op via iotlb_gather. The iommu core APIs use the same data structure in use for dirty tracking for VFIO device dirty (struct iova_bitmap) abstracted by iommu_dirty_bitmap_record() helper function. domain::dirty_ops: IOMMU domains will store the dirty ops depending on whether the iommu device supports dirty tracking or not. iommu drivers can then use this field to figure if the dirty tracking is supported+enforced on attach. The enforcement is enable via domain_alloc_user() which is done via IOMMUFD hwpt flag introduced later. Link: https://lore.kernel.org/r/20231024135109.73787-5-joao.m.martins@oracle.comSigned-off-by:
-
Joao Martins authored
Have the IOVA bitmap exported symbols adhere to the IOMMUFD symbol export convention i.e. using the IOMMUFD namespace. In doing so, import the namespace in the current users. This means VFIO and the vfio-pci drivers that use iova_bitmap_set(). Link: https://lore.kernel.org/r/20231024135109.73787-4-joao.m.martins@oracle.comSuggested-by:
Brett Creeley <brett.creeley@amd.com> Reviewed-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Joao Martins authored
Both VFIO and IOMMUFD will need iova bitmap for storing dirties and walking the user bitmaps, so move to the common dependency into IOMMUFD. In doing so, create the symbol IOMMUFD_DRIVER which designates the builtin code that will be used by drivers when selected. Today this means MLX5_VFIO_PCI and PDS_VFIO_PCI. IOMMU drivers will do the same (in future patches) when supporting dirty tracking and select IOMMUFD_DRIVER accordingly. Given that the symbol maybe be disabled, add header definitions in iova_bitmap.h for when IOMMUFD_DRIVER=n Link: https://lore.kernel.org/r/20231024135109.73787-3-joao.m.martins@oracle.comSigned-off-by:
-
Joao Martins authored
In preparation to move iova_bitmap into iommufd, export the rest of API symbols that will be used in what could be used by modules, namely: iova_bitmap_alloc iova_bitmap_free iova_bitmap_for_each Link: https://lore.kernel.org/r/20231024135109.73787-2-joao.m.martins@oracle.comSuggested-by:
-
- 21 Oct, 2023 1 commit
-
-
Nicolin Chen authored
The IOMMU_HWPT_ALLOC_NEST_PARENT flag is used to allocate a HWPT. Though a HWPT holds a domain in the core structure, it is still quite confusing to describe it using "domain" in the uAPI kdoc. Correct it to "HWPT". Fixes: 4ff54216 ("iommufd: Support allocating nested parent domain") Link: https://lore.kernel.org/r/20231017181552.12667-1-nicolinc@nvidia.comSigned-off-by:
Nicolin Chen <nicolinc@nvidia.com> Signed-off-by:
-
- 16 Oct, 2023 1 commit
-
-
Nicolin Chen authored
TEST_LENGTH passing ".size = sizeof(struct _struct) - 1" expects -EINVAL from "if (ucmd.user_size < op->min_size)" check in iommufd_fops_ioctl(). This has been working when min_size is exactly the size of the structure. However, if the size of the structure becomes larger than min_size, i.e. the passing size above is larger than min_size, that min_size sanity no longer works. Since the first test in TEST_LENGTH() was to test that min_size sanity routine, rework it to support a min_size calculation, rather than using the full size of the structure. Link: https://lore.kernel.org/r/20231015074648.24185-1-nicolinc@nvidia.comSigned-off-by:
-
- 10 Oct, 2023 6 commits
-
-
Yi Liu authored
Add the domain_alloc_user() op implementation. It supports allocating domains to be used as parent under nested translation. Unlike other drivers VT-D uses only a single page table format so it only needs to check if the HW can support nesting. Link: https://lore.kernel.org/r/20230928071528.26258-7-yi.l.liu@intel.comSigned-off-by:
Yi Liu <yi.l.liu@intel.com> Reviewed-by:
-
Yi Liu authored
Add mock_domain_alloc_user() and a new test case for IOMMU_HWPT_ALLOC_NEST_PARENT. Link: https://lore.kernel.org/r/20230928071528.26258-6-yi.l.liu@intel.comCo-developed-by:
-
Yi Liu authored
Extend IOMMU_HWPT_ALLOC to allocate domains to be used as parent (stage-2) in nested translation. Add IOMMU_HWPT_ALLOC_NEST_PARENT to the uAPI. Link: https://lore.kernel.org/r/20230928071528.26258-5-yi.l.liu@intel.comSigned-off-by:
-
Yi Liu authored
Extends iommufd_hw_pagetable_alloc() to accept user flags, the uAPI will provide the flags. Link: https://lore.kernel.org/r/20230928071528.26258-4-yi.l.liu@intel.comReviewed-by:
-
Yi Liu authored
Make IOMMUFD use iommu_domain_alloc_user() by default for iommu_domain creation. IOMMUFD needs to support iommu_domain allocation with parameters from userspace in nested support, and a driver is expected to implement everything under this op. If the iommu driver doesn't provide domain_alloc_user callback then IOMMUFD falls back to use iommu_domain_alloc() with an UNMANAGED type if possible. Link: https://lore.kernel.org/r/20230928071528.26258-3-yi.l.liu@intel.comSuggested-by:
-
Yi Liu authored
Introduce a new iommu_domain op to create domains owned by userspace, e.g. through IOMMUFD. These domains have a few different properties compares to kernel owned domains: - They may be PAGING domains, but created with special parameters. For instance aperture size changes/number of levels, different IOPTE formats, or other things necessary to make a vIOMMU work - We have to track all the memory allocations with GFP_KERNEL_ACCOUNT to make the cgroup sandbox stronger - Device-specialty domains, such as NESTED domains can be created by IOMMUFD. The new op clearly says the domain is being created by IOMMUFD, that the domain is intended for userspace use, and it provides a way to pass user flags or a driver specific uAPI structure to customize the created domain to exactly what the vIOMMU userspace driver requires. iommu drivers that cannot support VFIO/IOMMUFD should not support this op. This includes any driver that cannot provide a fully functional PAGING domain. This new op for now is only supposed to be used by IOMMUFD, hence no wrapper for it. IOMMUFD would call the callback directly. As for domain free, IOMMUFD would use iommu_domain_free(). Link: https://lore.kernel.org/r/20230928071528.26258-2-yi.l.liu@intel.comSuggested-by:
-
- 26 Sep, 2023 1 commit
-
-
Nicolin Chen authored
The point in iterating variant->mock_domains is to test the idev_ids[0] and idev_ids[1]. So use it instead of keeping testing idev_ids[0] only. Link: https://lore.kernel.org/r/20230919011637.16483-1-nicolinc@nvidia.comSigned-off-by:
-
- 19 Sep, 2023 1 commit
-
-
GuokaiXu authored
requres -> requires dramtically -> dramatically Link: https://lore.kernel.org/r/31680D47D9533D91+20230904023236.GA12494@xgk8823Signed-off-by:
GuokaiXu <xuguokai@ucas.com.cn> Signed-off-by:
-
- 17 Sep, 2023 11 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes: - Fix an UV boot crash - Skip spurious ENDBR generation on _THIS_IP_ - Fix ENDBR use in putuser() asm methods - Fix corner case boot crashes on 5-level paging - and fix a false positive WARNING on LTO kernels" * tag 'x86-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/purgatory: Remove LTO flags x86/boot/compressed: Reserve more memory for page tables x86/ibt: Avoid duplicate ENDBR in __put_user_nocheck*() x86/ibt: Suppress spurious ENDBR x86/platform/uv: Use alternate source for socket to node data
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Fix a performance regression on large SMT systems, an Intel SMT4 balancing bug, and a topology setup bug on (Intel) hybrid processors" * tag 'sched-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sched: Restore the SD_ASYM_PACKING flag in the DIE domain sched/fair: Fix SMT4 group_smt_balance handling sched/fair: Optimize should_we_balance() for large SMT systems
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fix from Ingo Molnar: "Fix a cold functions related false-positive objtool warning that triggers on Clang" * tag 'objtool-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix _THIS_IP_ detection for cold functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull WARN fix from Ingo Molnar: "Fix a missing preempt-enable in the WARN() slowpath" * tag 'core-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: panic: Reenable preemption in WARN slowpath
-
Linus Torvalds authored
The choose_32_64() macros were added to deal with an odd inconsistency between the 32-bit and 64-bit layout of 'struct stat' way back when in commit a52dd971 ("vfs: de-crapify "cp_new_stat()" function"). Then a decade later Mikulas noticed that said inconsistency had been a mistake in the early x86-64 port, and shouldn't have existed in the first place. So commit 932aba1e ("stat: fix inconsistency between struct stat and struct compat_stat") removed the uses of the helpers. But the helpers remained around, unused. Get rid of them. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: "Three small SMB3 client fixes, one to improve a null check and two minor cleanups" * tag '6.6-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb3: fix some minor typos and repeated words smb3: correct places where ENOTSUPP is used instead of preferred EOPNOTSUPP smb3: move server check earlier when setting channel sequence number
-
git://git.samba.org/ksmbdLinus Torvalds authored
Pull smb server fixes from Steve French: "Two ksmbd server fixes" * tag '6.6-rc1-ksmbd' of git://git.samba.org/ksmbd: ksmbd: fix passing freed memory 'aux_payload_buf' ksmbd: remove unneeded mark_inode_dirty in set_info_sec()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Regression and bug fixes for ext4" * tag 'ext4_for_linus-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix rec_len verify error ext4: do not let fstrim block system suspend ext4: move setting of trimmed bit into ext4_try_to_trim_range() jbd2: Fix memory leak in journal_init_common() jbd2: Remove page size assumptions buffer: Make bh_offset() work for compound pages
-
Song Liu authored
-flto* implies -ffunction-sections. With LTO enabled, ld.lld generates multiple .text sections for purgatory.ro: $ readelf -S purgatory.ro | grep " .text" [ 1] .text PROGBITS 0000000000000000 00000040 [ 7] .text.purgatory PROGBITS 0000000000000000 000020e0 [ 9] .text.warn PROGBITS 0000000000000000 000021c0 [13] .text.sha256_upda PROGBITS 0000000000000000 000022f0 [15] .text.sha224_upda PROGBITS 0000000000000000 00002be0 [17] .text.sha256_fina PROGBITS 0000000000000000 00002bf0 [19] .text.sha224_fina PROGBITS 0000000000000000 00002cc0 This causes WARNING from kexec_purgatory_setup_sechdrs(): WARNING: CPU: 26 PID: 110894 at kernel/kexec_file.c:919 kexec_load_purgatory+0x37f/0x390 Fix this by disabling LTO for purgatory. [ AFAICT, x86 is the only arch that supports LTO and purgatory. ] We could also fix this with an explicit linker script to rejoin .text.* sections back into .text. However, given the benefit of LTOing purgatory is small, simply disable the production of more .text.* sections for now. Fixes: b33fff07 ("x86, build: allow LTO to be selected") Signed-off-by:Song Liu <song@kernel.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Sami Tolvanen <samitolvanen@google.com> Link: https://lore.kernel.org/r/20230914170138.995606-1-song@kernel.org
-
Kirill A. Shutemov authored
The decompressor has a hard limit on the number of page tables it can allocate. This limit is defined at compile-time and will cause boot failure if it is reached. The kernel is very strict and calculates the limit precisely for the worst-case scenario based on the current configuration. However, it is easy to forget to adjust the limit when a new use-case arises. The worst-case scenario is rarely encountered during sanity checks. In the case of enabling 5-level paging, a use-case was overlooked. The limit needs to be increased by one to accommodate the additional level. This oversight went unnoticed until Aaron attempted to run the kernel via kexec with 5-level paging and unaccepted memory enabled. Update wost-case calculations to include 5-level paging. To address this issue, let's allocate some extra space for page tables. 128K should be sufficient for any use-case. The logic can be simplified by using a single value for all kernel configurations. [ Also add a warning, should this memory run low - by Dave Hansen. ] Fixes: 34bbb000 ("x86/boot/compressed: Enable 5-level paging during decompression stage") Reported-by:
Aaron Lu <aaron.lu@intel.com> Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
-
- 16 Sep, 2023 6 commits
-
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix kernel-devel RPM and linux-headers Deb package - Fix too long argument list error in 'make modules_install' * tag 'kbuild-fixes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: avoid long argument lists in make modules_install kbuild: fix kernel-devel RPM package and linux-headers Deb package
-
Linus Torvalds authored
Commit 408579cd ("mm: Update do_vmi_align_munmap() return semantics") seems to have updated one of the callers of do_vmi_munmap() incorrectly: it used to check for the error case (which didn't change: negative means error). That commit changed the check to the success case (which did change: before that commit, 0 was success, and 1 was "success and lock downgraded". After the change, it's always 0 for success, and the lock will have been released if requested). This didn't change any actual VM behavior _except_ for memory accounting when 'VM_ACCOUNT' was set on the vma. Which made the wrong return value test fairly subtle, since everything continues to work. Or rather - it continues to work but the "Committed memory" accounting goes all wonky (Committed_AS value in /proc/meminfo), and depending on settings that then causes problems much much later as the VM relies on bogus statistics for its heuristics. Revert that one line of the change back to the original logic. Fixes: 408579cd ("mm: Update do_vmi_align_munmap() return semantics") Reported-by:
Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Reported-bisected-and-tested-by:
Michael Labiuk <michael.labiuk@virtuozzo.com> Cc: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Link: https://lore.kernel.org/all/1694366957@msgid.manchmal.in-ulm.de/Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "16 small(ish) fixes all in drivers. The major fixes are in pm8001 (fixes MSI-X issue going back to its origin), the qla2xxx endianness fix, which fixes a bug on big endian and the lpfc ones which can cause an oops on module removal without them" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: Prevent use-after-free during rmmod with mapped NVMe rports scsi: lpfc: Early return after marking final NLP_DROPPED flag in dev_loss_tmo scsi: lpfc: Fix the NULL vs IS_ERR() bug for debugfs_create_file() scsi: target: core: Fix target_cmd_counter leak scsi: pm8001: Setup IRQs on resume scsi: pm80xx: Avoid leaking tags when processing OPC_INB_SET_CONTROLLER_CONFIG command scsi: pm80xx: Use phy-specific SAS address when sending PHY_START command scsi: ufs: core: Poll HCS.UCRDY before issuing a UIC command scsi: ufs: core: Move __ufshcd_send_uic_cmd() outside host_lock scsi: qedf: Add synchronization between I/O completions and abort scsi: target: Replace strlcpy() with strscpy() scsi: qla2xxx: Fix NULL vs IS_ERR() bug for debugfs_create_dir() scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id() scsi: qla2xxx: Correct endianness for rqstlen and rsplen scsi: ppa: Fix accidentally reversed conditions for 16-bit and 32-bit EPP scsi: megaraid_sas: Fix deadlock on firmware crashdump
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ata fixes from Damien Le Moal: - Fix link power management transitions to disallow unsupported states (Niklas) - A small string handling fix for the sata_mv driver (Christophe) - Clear port pending interrupts before reset, as per AHCI specifications (Szuying). Followup fixes for this one are to not clear ATA_PFLAG_EH_PENDING in ata_eh_reset() to allow EH to continue on with other actions recorded with error interrupts triggered before EH completes. And an additional fix to avoid thawing a port twice in EH (Niklas) - Small code style fixes in the pata_parport driver to silence the build bot as it keeps complaining about bad indentation (me) - A fix for the recent CDL code to avoid fetching sense data for successful commands when not necessary for correct operation (Niklas) * tag 'ata-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: libata-core: fetch sense data for successful commands iff CDL enabled ata: libata-eh: do not thaw the port twice in ata_eh_reset() ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset() ata: pata_parport: Fix code style issues ata: libahci: clear pending interrupt status ata: sata_mv: Fix incorrect string length computation in mv_dump_mem() ata: libata: disallow dev-initiated LPM transitions to unsupported states
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fix from Greg KH: "Here is a single USB fix for a much-reported regression for 6.6-rc1. It resolves a crash in the typec debugfs code for many systems. It's been in linux-next with no reported issues, and many people have reported it resolving their problem with 6.6-rc1" * tag 'usb-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: ucsi: Fix NULL pointer dereference
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core fixes from Greg KH: "Here is a single driver core fix for a much-reported-by-sysbot issue that showed up in 6.6-rc1. It's been submitted by many people, all in the same way, so it obviously fixes things for them all. Also in here is a single documentation update adding riscv to the embargoed hardware document in case there are any future issues with that processor family. Both of these have been in linux-next with no reported problems" * tag 'driver-core-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Documentation: embargoed-hardware-issues.rst: Add myself for RISC-V driver core: return an error when dev_set_name() hasn't happened
-
