- 22 Dec, 2020 8 commits
-
-
Jani Nikula authored
Add necessary #includes and forward declarations to make the header compile on its own. Reviewed-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Jani Nikula authored
Add necessary #includes and forward declarations to make the header compile on its own. Reviewed-by:
-
Jani Nikula authored
Add necessary #includes and forward declarations to make the header compile on its own. Reviewed-by:
-
Jani Nikula authored
Add necessary #includes and forward declarations to make the header compile on its own. Reviewed-by:
-
Jani Nikula authored
Add necessary #includes and forward declarations to make the header compile on its own. Reviewed-by:
-
Jani Nikula authored
Add necessary #includes and forward declarations to make the header compile on its own. Reviewed-by:
-
Jani Nikula authored
Add necessary #includes and forward declarations to make the header compile on its own. While at it, also remove a useless forward declaration. Reviewed-by:
-
Jani Nikula authored
Remove unused declaration. Reviewed-by:
-
- 03 Dec, 2020 1 commit
-
-
Jani Nikula authored
In most cases, we are better off letting the compiler decide whether to inline static functions in .c files or not. In this case, the inline will be ignored anyway as mmio_pm_restore_handler() is passed as a function pointer. Fixes: 5f60b12e ("drm/i915/gvt: Save/restore HW status to support GVT suspend/resume") Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Hang Yuan <hang.yuan@linux.intel.com> Cc: Colin Xu <colin.xu@intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: intel-gvt-dev@lists.freedesktop.org Reviewed-by:
-
- 23 Nov, 2020 1 commit
-
-
Julian Stecklina authored
The current interface of intel_gvt_register_hypervisor() expects a non-const pointer to struct intel_gvt_mpt, even though the mediator never modifies (or should modifiy) the content of this struct. Change the function signature and relevant struct members to const to properly express the API's intent and allow instances of intel_gvt_mpt to be allocated as const. While I was here, I also made KVM's instance of this struct const to reduce the number of writable function pointers in the kernel. Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: intel-gvt-dev@lists.freedesktop.org Reviewed-by:
Julian Stecklina <julian.stecklina@cyberus-technology.de> Signed-off-by:
-
- 11 Nov, 2020 1 commit
-
-
Deepak R Varma authored
idr_init() uses base 0 which is an invalid identifier. The new function idr_init_base allows IDR to set the ID lookup from base 1. This avoids all lookups that otherwise starts from 0 since 0 is always unused. References: commit 6ce711f2 ("idr: Make 1-based IDRs more efficient") Reviewed-by:
Deepak R Varma <mh12gx2825@gmail.com> Signed-off-by:
-
- 10 Nov, 2020 4 commits
-
-
Colin Xu authored
Program display related vregs to proper value at initialization, setup virtual monitor and hotplug. vGPU virtual display vregs inherit the value from pregs. The virtual DP monitor is always setup on PORT_B for BXT/APL. However the host may connect monitor on other PORT or without any monitor connected. Without properly setup PIPE/DDI/PLL related vregs, guest driver may not setup the virutal display as expected, and the guest desktop may not be created. Since only one virtual display is supported, enable PIPE_A only. And enable transcoder/DDI/PLL based on which port is setup for BXT/APL. V2: Revise commit message. V3: set_edid should on PORT_B for BXT. Inject hpd event for BXT. V4: Temporarily disable vfio edid on BXT/APL until issue fixed. V5: Rebase to use new HPD define GEN8_DE_PORT_HOTPLUG for BXT. Put vfio edid disabling on BXT/APL to a separate patch. Acked-by:
Colin Xu <colin.xu@intel.com> Signed-off-by:
-
Colin Xu authored
This patch add gvt resume wrapper into i915_drm_resume(). GVT relies on i915 so resume gvt at last. V2: - Direct call into gvt suspend/resume wrapper in intel_gvt.h/intel_gvt.c. The wrapper and implementation will check and call gvt routine. (zhenyu) V3: Refresh. V4: Rebase. V5: Fail intel_gvt_suspend() if fail to save GGTT. V6: Save host entry to per-vGPU gtt.ggtt_mm on each host_entry update so only need the resume routine. V7: Refresh. Reviewed-by:
Hang Yuan <hang.yuan@linux.intel.com> Signed-off-by:
-
Colin Xu authored
This patch save/restore necessary GVT info during i915 suspend/resume so that GVT enabled QEMU VM can continue running. Only GGTT and fence regs are saved/restored now. GVT will save GGTT entries on each host_entry update, restore the saved dirty entries and re-init fence regs in resume routine. V2: - Change kzalloc/kfree to vzalloc/vfree since the space allocated from kmalloc may not enough for all saved GGTT entries. - Keep gvt suspend/resume wrapper in intel_gvt.h/intel_gvt.c and move the actual implementation to gvt.h/gvt.c. (zhenyu) - Check gvt config on and active with intel_gvt_active(). (zhenyu) V3: (zhenyu) - Incorrect copy length. Should be num entries * entry size. - Use memcpy_toio()/memcpy_fromio() instead of memcpy for iomem. - Add F_PM_SAVE flags to indicate which MMIOs to save/restore for PM. V4: Rebase. V5: Fail intel_gvt_save_ggtt as -ENOMEM if fail to alloc memory to save ggtt. Free allocated ggtt_entries on failure. V6: Save host entry to per-vGPU gtt.ggtt_mm on each host_entry update. V7: Restore GGTT entry based on present bit. Split fence restore and mmio restore in different functions. Reviewed-by:
-
Yan Zhao authored
Correct falsely removed comment of flag F_UNALIGN. Fixes: a6c5817a ("drm/i915/gvt: remove flag F_CMD_ACCESSED") Reviewed-by:
Yan Zhao <yan.y.zhao@intel.com> Signed-off-by:
-
- 03 Nov, 2020 1 commit
-
-
Jani Nikula authored
Signed-off-by:
-
- 30 Oct, 2020 20 commits
-
-
Chris Wilson authored
If the VBT assigned tc->legacy_port mismatches the live_status indicator for the connector, we ignore the VBT directive and switch over to the HW setting. This is not a driver error, unless we happen to misparse the VBT or the live_status registers. However, for the system in CI where the error is only reported on 1 port out of 4, the evidence indicates the VBT is wrong. Stop flaging this as an error since the cause is beyond our control, fixup the mistake and continue on. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201030153209.14808-1-chris@chris-wilson.co.uk
-
Ville Syrjälä authored
ibx_irq_pre_postinstall() looks totally pointless. We can just init both SDEIMR and SDEIER at the same time before enabling the master interrupt. It's equally racy as the other order due to doing all of this from the postinstall stage with the interrupt handler already in place. That is, safe with MSI but racy with shared legacy interrupts. Fortunately we should have MSI on all ilk+. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-20-ville.syrjala@linux.intel.comReviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com>
-
Ville Syrjälä authored
No reason not to use GEN3_IRQ_INIT() on icp+. Reviewed-by:
-
Ville Syrjälä authored
Let's enable the hardware hpd logic only for the ports we can actually use. In theory this may save some miniscule amounts of power, and more importantly it eliminates a lot if platform specific codepaths since the generic thing can now deal with any combination of ports being present on each SKU. v2: Deal with DG1 v3: Deal with DG1 some more Signed-off-by:
-
Ville Syrjälä authored
We no longer unmask all HPD irqs, so we can drop the ugly per-platform HPD IIR masking. IMR will prevent unsupported bits from appearing in IIR. v2: Deal with DG1 Include "HOTPLUG" in the mask names (Lucas) v3: Fix typos in subject Reviewed-by: -
Ville Syrjälä authored
Replace this silly tmp_mask with hotplug_trigger/te_trigger where appropriate. Reviewed-by:
-
Ville Syrjälä authored
No reason that I can see why we should enable the hpd detection logic already during irq postinstall phase. We don't even do this on all the platforms. We just need it before we actually enable the hotplug interrupts in .hpd_irq_setup(), and in fact we already do it there as well. Let's just eliminate the redundant early setup. Signed-off-by:
-
Ville Syrjälä authored
No reason to stuff both type-c and tbt into the same function. Let's split this so we may more easily handle platforms that lack the tbt spefific bits. Reviewed-by:
-
Ville Syrjälä authored
Move intel_hpd_{enabled,hotplug}_irqs() closes to the beginning of the file so we can use them in more places. No functional changes. Reviewed-by: -
Ville Syrjälä authored
Parametrize the icp+ TC HPD bits using hpd_pin rather than tc_port so it's clear what kind of an animal we're dealing with. Reviewed-by:
-
Ville Syrjälä authored
Use hpd_pin instead of tc_port in the GEN11_{TC,TBT}_HOTPLUG() to make it clear what they refer to. Reviewed-by: -
Ville Syrjälä authored
Use hpd_pin instead of port in the parametrized ICP+ DDI HPD macros. Makes it clear what these refer to. v2: Handle DG1 Reviewed-by:
-
Ville Syrjälä authored
Unify the BDW/BXT hotplug bits. BDW only has port A, but that matches BXT port A so we can shar the same macro for both. v2: Remember the gvt Reviewed-by:
-
Ville Syrjälä authored
Use hpd_pin to parametrize BXT_DE_PORT_HP_DDI() to make it clear these have nothing to do with DDI ports or PHYs as such. The only thing that matters is the HPD pin assignment. v2: Remember the gvt Reviewed-by:
-
Ville Syrjälä authored
As with the VBT DVO port, RKL uses PHY based mapping for the VBT AUX CH. Adjust the code to use the new AUX_USBCn names and add a comment to explain the situation. Reviewed-by:
-
Ville Syrjälä authored
Let's make the AUX CH names match the spec (AUX A-F for pre-tgl, AUX A-C or AUX USBC1-6 for tgl+). And while at it let's include the full encoder name in the AUX CH name as well (as opposed to just using port_name() which wouldn't give us the right thing on tgl+). Reviewed-by:
-
Ville Syrjälä authored
Just like with the DDIs tgl+ renamed the AUX CHs to reflect the type of the DDI. Let's add the aliasing enum values for the type-C AUX CHs. Reviewed-by:
-
Ville Syrjälä authored
Let's pimp the DDI encoder->name to reflect what the spec calls them. Ie. on pre-tgl DDI A-F, on tgl+ DDI A-C or DDI TC1-6. Also since each encoder is really a combination of the DDI and the PHY we include the PHY name as well. ICL is a bit special since it already has the two different types of DDIs (combo or TC) but it still calls them just DDI A-F regarless of the type. For that let's add an extra "(TC)" note to remind is which type of DDI it really is. The code is darn ugly, but not sure there's much we can do about it. Reviewed-by:
-
Ville Syrjälä authored
Since tgl the DDIs have been named A,B,C,TC1,TC2,TC3... Add the appropriate enum values for the TC DDIs to enum port. v2: Deal with rkl and dg1 Reviewed-by:
-
Ville Syrjälä authored
Make the namespacing for enum tc_port better by adding the TC_ to the actual enum values. v2: Drop the extra TC (Lucas) Reviewed-by:
-
- 29 Oct, 2020 2 commits
-
-
Ville Syrjälä authored
Remove the hand rolled array of WM0_PIPE register offsets and use the standard _MMIO_PIPE3() instead. v2: Take care of gvt too Signed-off-by:
-
Zou Wei authored
This patch fixes below warnings reported by coccicheck ./drivers/gpu/drm/i915/i915_debugfs.c:789:5-8: Unneeded variable: "ret". Return "0" on line 1012 Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zou Wei <zou_wei@huawei.com> Signed-off-by:
-
- 28 Oct, 2020 2 commits
-
-
Imre Deak authored
The atomic check hooks must look up the encoder to be used with a connector from the connector's atomic state, and not assume that it's the connector's current attached encoder. The latter one can change under the atomic check func, or can be unset yet as in the case of MST connectors. This fixes [ 7.940719] Oops: 0000 [#1] SMP NOPTI [ 7.944407] CPU: 2 PID: 143 Comm: kworker/2:2 Not tainted 5.6.0-1023-oem #23-Ubuntu [ 7.952102] Hardware name: Dell Inc. Latitude 7320/, BIOS 88.87.11 09/07/2020 [ 7.959278] Workqueue: events output_poll_execute [drm_kms_helper] [ 7.965511] RIP: 0010:intel_psr_atomic_check+0x37/0xa0 [i915] [ 7.971327] Code: 80 2d 06 00 00 20 74 42 80 b8 34 71 00 00 00 74 39 48 8b 72 08 48 85 f6 74 30 80 b8 f8 71 00 00 00 74 27 4c 8b 87 80 04 00 00 <41> 8b 78 78 83 ff 08 77 19 31 c9 83 ff 05 77 19 48 81 c1 20 01 00 [ 7.977541] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input5 [ 7.990154] RSP: 0018:ffffb864c073fac8 EFLAGS: 00010202 [ 7.990155] RAX: ffff8c5d55ce0000 RBX: ffff8c5d54519000 RCX: 0000000000000000 [ 7.990155] RDX: ffff8c5d55cb30c0 RSI: ffff8c5d89a0c800 RDI: ffff8c5d55fcf800 [ 7.990156] RBP: ffffb864c073fac8 R08: 0000000000000000 R09: ffff8c5d55d9f3a0 [ 7.990156] R10: ffff8c5d55cb30c0 R11: 0000000000000009 R12: ffff8c5d55fcf800 [ 7.990156] R13: ffff8c5d55cb30c0 R14: ffff8c5d56989cc0 R15: ffff8c5d56989cc0 [ 7.990158] FS: 0000000000000000(0000) GS:ffff8c5d8e480000(0000) knlGS:0000000000000000 [ 8.047193] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.052970] CR2: 0000000000000078 CR3: 0000000856500005 CR4: 0000000000760ee0 [ 8.060137] PKRU: 55555554 [ 8.062867] Call Trace: [ 8.065361] intel_digital_connector_atomic_check+0x53/0x130 [i915] [ 8.071703] intel_dp_mst_atomic_check+0x5b/0x200 [i915] [ 8.077074] drm_atomic_helper_check_modeset+0x1db/0x790 [drm_kms_helper] [ 8.083942] intel_atomic_check+0x92/0xc50 [i915] [ 8.088705] ? drm_plane_check_pixel_format+0x4f/0xb0 [drm] [ 8.094345] ? drm_atomic_plane_check+0x7a/0x3a0 [drm] [ 8.099548] drm_atomic_check_only+0x2b1/0x450 [drm] [ 8.104573] drm_atomic_commit+0x18/0x50 [drm] [ 8.109070] drm_client_modeset_commit_atomic+0x1c9/0x200 [drm] [ 8.115056] drm_client_modeset_commit_force+0x55/0x160 [drm] [ 8.120866] drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xb0 [drm_kms_helper] [ 8.128415] drm_fb_helper_set_par+0x34/0x50 [drm_kms_helper] [ 8.134225] drm_fb_helper_hotplug_event.part.0+0xb4/0xe0 [drm_kms_helper] [ 8.141150] drm_fb_helper_hotplug_event+0x1c/0x30 [drm_kms_helper] [ 8.147481] intel_fbdev_output_poll_changed+0x6f/0xa0 [i915] [ 8.153287] drm_kms_helper_hotplug_event+0x2c/0x40 [drm_kms_helper] [ 8.159709] output_poll_execute+0x1aa/0x1c0 [drm_kms_helper] [ 8.165506] process_one_work+0x1e8/0x3b0 [ 8.169561] worker_thread+0x4d/0x400 [ 8.173249] kthread+0x104/0x140 [ 8.176515] ? process_one_work+0x3b0/0x3b0 [ 8.180726] ? kthread_park+0x90/0x90 [ 8.184416] ret_from_fork+0x1f/0x40 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2361 References: https://gitlab.freedesktop.org/drm/intel/-/issues/2486Reported-by:
William Tseng <william.tseng@intel.com> Reported-by:
Cooper Chiou <cooper.chiou@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201027160928.3665377-1-imre.deak@intel.com
-
Lucas De Marchi authored
First check in the function is if swsci() is supported. All the error paths are easy to figure out the reason, so remove the extra debug message: it's normal not to support swsci() e.g. in dgfx. v2: Rather than special case dgfx, just remove the debug message (from Ville) Signed-off-by:
-
