- 23 Feb, 2017 4 commits
-
-
Steffen Maier authored
commit 4eeaa4f3 upstream. On a successful end of reopen port forced, zfcp_erp_strategy_followup_success() re-uses the port erp_action and the subsequent zfcp_erp_action_cleanup() now sees ZFCP_ERP_SUCCEEDED with erp_action->action==ZFCP_ERP_ACTION_REOPEN_PORT instead of ZFCP_ERP_ACTION_REOPEN_PORT_FORCED but must not perform zfcp_scsi_schedule_rport_register(). We can detect this because the fresh port reopen erp_action is in its very first step ZFCP_ERP_STEP_UNINITIALIZED. Otherwise this opens a time window with unblocked rport (until the followup port reopen recovery would block it again). If a scsi_cmnd timeout occurs during this time window fc_timed_out() cannot work as desired and such command would indeed time out and trigger scsi_eh. This prevents a clean and timely path failover. This should not happen if the path issue can be recovered on FC transport layer such as path issues involving RSCNs. Also, unnecessary and repeated DID_IMM_RETRY for pending and undesired new requests occur because internally zfcp still has its zfcp_port blocked. As follow-on errors with scsi_eh, it can cause, in the worst case, permanently lost paths due to one of: sd <scsidev>: [<scsidisk>] Medium access timeout failure. Offlining disk! sd <scsidev>: Device offlined - not ready after error recovery For fix validation and to aid future debugging with other recoveries we now also trace (un)blocking of rports. Signed-off-by:
Steffen Maier <maier@linux.vnet.ibm.com> Fixes: 5767620c ("[SCSI] zfcp: Do not unblock rport from REOPEN_PORT_FORCED") Fixes: a2fa0aed ("[SCSI] zfcp: Block FC transport rports early on errors") Fixes: 5f852be9 ("[SCSI] zfcp: Fix deadlock between zfcp ERP and SCSI") Fixes: 338151e0 ("[SCSI] zfcp: make use of fc_remote_port_delete when target port is unavailable") Fixes: 3859f6a2 ("[PATCH] zfcp: add rports to enable scsi_add_device to work again") Reviewed-by:
Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Steffen Maier authored
commit 70369f8e upstream. In the hardware data router case, introduced with kernel 3.2 commit 86a9668a ("[SCSI] zfcp: support for hardware data router") the ELS/GS request&response length needs to be initialized as in the chained SBAL case. Otherwise, the FCP channel rejects ELS requests with FSF_REQUEST_SIZE_TOO_LARGE. Such ELS requests can be issued by user space through BSG / HBA API, or zfcp itself uses ADISC ELS for remote port link test on RSCN. The latter can cause a short path outage due to unnecessary remote target port recovery because the always failing ADISC cannot detect extremely short path interruptions beyond the local FCP channel. Below example is decoded with zfcpdbf from s390-tools: Timestamp : ... Area : SAN Subarea : 00 Level : 1 Exception : - CPU id : .. Caller : zfcp_dbf_san_req+0408 Record id : 1 Tag : fssels1 Request id : 0x<reqid> Destination ID : 0x00<target d_id> Payload info : 52000000 00000000 <our wwpn > [ADISC] <our wwnn > 00<s_id> 00000000 00000000 00000000 00000000 00000000 Timestamp : ... Area : HBA Subarea : 00 Level : 1 Exception : - CPU id : .. Caller : zfcp_dbf_hba_fsf_res+0740 Record id : 1 Tag : fs_ferr Request id : 0x<reqid> Request status : 0x00000010 FSF cmnd : 0x0000000b [FSF_QTCB_SEND_ELS] FSF sequence no: 0x... FSF issued : ... FSF stat : 0x00000061 [FSF_REQUEST_SIZE_TOO_LARGE] FSF stat qual : 00000000 00000000 00000000 00000000 Prot stat : 0x00000100 Prot stat qual : 00000000 00000000 00000000 00000000 Signed-off-by:
-
Steffen Maier authored
commit bd77befa upstream. For an NPIV-enabled FCP device, zfcp can erroneously show "NPort (fabric via point-to-point)" instead of "NPIV VPORT" for the port_type sysfs attribute of the corresponding fc_host. s390-tools that can be affected are dbginfo.sh and ziomon. zfcp_fsf_exchange_config_evaluate() ignores fsf_qtcb_bottom_config.connection_features indicating NPIV and only sets fc_host_port_type to FC_PORTTYPE_NPORT if fsf_qtcb_bottom_config.fc_topology is FSF_TOPO_FABRIC. Only the independent zfcp_fsf_exchange_port_evaluate() evaluates connection_features to overwrite fc_host_port_type to FC_PORTTYPE_NPIV in case of NPIV. Code was introduced with upstream kernel 2.6.30 commit 0282985d ("[SCSI] zfcp: Report fc_host_port_type as NPIV"). This works during FCP device recovery (such as set online) because it performs FSF_QTCB_EXCHANGE_CONFIG_DATA followed by FSF_QTCB_EXCHANGE_PORT_DATA in sequence. However, the zfcp-specific scsi host sysfs attributes "requests", "megabytes", or "seconds_active" trigger only zfcp_fsf_exchange_config_evaluate() resetting fc_host port_type to FC_PORTTYPE_NPORT despite NPIV. The zfcp-specific scsi host sysfs attribute "utilization" triggers only zfcp_fsf_exchange_port_evaluate() correcting the fc_host port_type again in case of NPIV. Evaluate fsf_qtcb_bottom_config.connection_features in zfcp_fsf_exchange_config_evaluate() where it belongs to. Signed-off-by:
-
Max Staudt authored
commit d50b3f43 upstream. When using efifb with a 16-bit (5:6:5) visual, fbcon's text is rendered in the wrong colors - e.g. text gray (#aaaaaa) is rendered as green (#50bc50) and neighboring pixels have slightly different values (such as #50bc78). The reason is that fbcon loads its 16 color palette through efifb_setcolreg(), which in turn calculates a 32-bit value to write into memory for each palette index. Until now, this code could only handle 8-bit visuals and didn't mask overlapping values when ORing them. With this patch, fbcon displays the correct colors when a qemu VM is booted in 16-bit mode (in GRUB: "set gfxpayload=800x600x16"). Fixes: 7c83172b ("x86_64 EFI boot support: EFI frame buffer driver") # v2.6.24+ Signed-off-by:
Max Staudt <mstaudt@suse.de> Acked-By:
Peter Jones <pjones@redhat.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> [bwh: Backported to 3.2: adjust filename] Signed-off-by:
-
- 20 Nov, 2016 36 commits
-
-
Ben Hutchings authored
-
Dan Carpenter authored
commit bcdd0c16 upstream. This is an fsfuzzer bug. ->s_journal is set at the end of ext3_load_journal() but we try to use it in the error handling from ext3_get_journal() while it's still NULL. [ 337.039041] BUG: unable to handle kernel NULL pointer dereference at 0000000000000024 [ 337.040380] IP: [<ffffffff816e6539>] _raw_spin_lock+0x9/0x30 [ 337.041687] PGD 0 [ 337.043118] Oops: 0002 [#1] SMP [ 337.044483] CPU 3 [ 337.044495] Modules linked in: ecb md4 cifs fuse kvm_intel kvm brcmsmac brcmutil crc8 cordic r8169 [last unloaded: scsi_wait_scan] [ 337.047633] [ 337.049259] Pid: 8308, comm: mount Not tainted 3.2.0-rc2-next-20111121+ #24 SAMSUNG ELECTRONICS CO., LTD. RV411/RV511/E3511/S3511 /RV411/RV511/E3511/S3511 [ 337.051064] RIP: 0010:[<ffffffff816e6539>] [<ffffffff816e6539>] _raw_spin_lock+0x9/0x30 [ 337.052879] RSP: 0018:ffff8800b1d11ae8 EFLAGS: 00010282 [ 337.054668] RAX: 0000000000000100 RBX: 0000000000000000 RCX: ffff8800b77c2000 [ 337.056400] RDX: ffff8800a97b5c00 RSI: 0000000000000000 RDI: 0000000000000024 [ 337.058099] RBP: ffff8800b1d11ae8 R08: 6000000000000000 R09: e018000000000000 [ 337.059841] R10: ff67366cc2607c03 R11: 00000000110688e6 R12: 0000000000000000 [ 337.061607] R13: 0000000000000000 R14: 0000000000000000 R15: ffff8800a78f06e8 [ 337.063385] FS: 00007f9d95652800(0000) GS:ffff8800b7180000(0000) knlGS:0000000000000000 [ 337.065110] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 337.066801] CR2: 0000000000000024 CR3: 00000000aef2c000 CR4: 00000000000006e0 [ 337.068581] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 337.070321] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 337.072105] Process mount (pid: 8308, threadinfo ffff8800b1d10000, task ffff8800b1d02be0) [ 337.073800] Stack: [ 337.075487] ffff8800b1d11b08 ffffffff811f48cf ffff88007ac9b158 0000000000000000 [ 337.077255] ffff8800b1d11b38 ffffffff8119405d ffff88007ac9b158 ffff88007ac9b250 [ 337.078851] ffffffff8181bda0 ffffffff8181bda0 ffff8800b1d11b68 ffffffff81131e31 [ 337.080284] Call Trace: [ 337.081706] [<ffffffff811f48cf>] log_start_commit+0x1f/0x40 [ 337.083107] [<ffffffff8119405d>] ext3_evict_inode+0x1fd/0x2a0 [ 337.084490] [<ffffffff81131e31>] evict+0xa1/0x1a0 [ 337.085857] [<ffffffff81132031>] iput+0x101/0x210 [ 337.087220] [<ffffffff811339d1>] iget_failed+0x21/0x30 [ 337.088581] [<ffffffff811905fc>] ext3_iget+0x15c/0x450 [ 337.089936] [<ffffffff8118b0c1>] ? ext3_rsv_window_add+0x81/0x100 [ 337.091284] [<ffffffff816df9a4>] ext3_get_journal+0x15/0xde [ 337.092641] [<ffffffff811a2e9b>] ext3_fill_super+0xf2b/0x1c30 [ 337.093991] [<ffffffff810ddf7d>] ? register_shrinker+0x4d/0x60 [ 337.095332] [<ffffffff8111c112>] mount_bdev+0x1a2/0x1e0 [ 337.096680] [<ffffffff811a1f70>] ? ext3_setup_super+0x210/0x210 [ 337.098026] [<ffffffff8119a770>] ext3_mount+0x10/0x20 [ 337.099362] [<ffffffff8111cbee>] mount_fs+0x3e/0x1b0 [ 337.100759] [<ffffffff810eda1b>] ? __alloc_percpu+0xb/0x10 [ 337.102330] [<ffffffff81135385>] vfs_kern_mount+0x65/0xc0 [ 337.103889] [<ffffffff8113611f>] do_kern_mount+0x4f/0x100 [ 337.105442] [<ffffffff811378fc>] do_mount+0x19c/0x890 [ 337.106989] [<ffffffff810e8456>] ? memdup_user+0x46/0x90 [ 337.108572] [<ffffffff810e84f3>] ? strndup_user+0x53/0x70 [ 337.110114] [<ffffffff811383fb>] sys_mount+0x8b/0xe0 [ 337.111617] [<ffffffff816ed93b>] system_call_fastpath+0x16/0x1b [ 337.113133] Code: 38 c2 74 0f 66 0f 1f 44 00 00 f3 90 0f b6 03 38 c2 75 f7 48 83 c4 08 5b 5d c3 0f 1f 84 00 00 00 00 00 55 b8 00 01 00 00 48 89 e5 <f0> 66 0f c1 07 0f b6 d4 38 c2 74 0c 0f 1f 00 f3 90 0f b6 07 38 [ 337.116588] RIP [<ffffffff816e6539>] _raw_spin_lock+0x9/0x30 [ 337.118260] RSP <ffff8800b1d11ae8> [ 337.119998] CR2: 0000000000000024 [ 337.188701] ---[ end trace c36d790becac1615 ]--- Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Amir Goldstein <amir73il@gmail.com> Signed-off-by:
-
Jan Beulich authored
commit 9a035a40 upstream. This should really only be done for XS_TRANSACTION_END messages, or else at least some of the xenstore-* tools don't work anymore. Fixes: 0beef634 ("xenbus: don't BUG() on user mode induced condition") Reported-by:
Richard Schütz <rschuetz@uni-koblenz.de> Signed-off-by:
Jan Beulich <jbeulich@suse.com> Tested-by:
David Vrabel <david.vrabel@citrix.com> Cc: Ed Swierk <eswierk@skyportsystems.com> [bwh: Backported to 3.2: adjust filename] Signed-off-by:
-
Jan Beulich authored
commit 0beef634 upstream. Inability to locate a user mode specified transaction ID should not lead to a kernel crash. For other than XS_TRANSACTION_START also don't issue anything to xenbus if the specified ID doesn't match that of any active transaction. Signed-off-by:
-
Vladis Dronov authored
commit d5468d7a upstream. Commit 588afcc1 ("[media] usbvision fix overflow of interfaces array")' should be reverted, because: * "!dev->actconfig->interface[ifnum]" won't catch a case where the value is not NULL but some garbage. This way the system may crash later with GPF. * "(ifnum >= USB_MAXINTERFACES)" does not cover all the error conditions. "ifnum" should be compared to "dev->actconfig-> desc.bNumInterfaces", i.e. compared to the number of "struct usb_interface" kzalloc()-ed, not to USB_MAXINTERFACES. * There is a "struct usb_device" leak in this error path, as there is usb_get_dev(), but no usb_put_dev() on this path. * There is a bug of the same type several lines below with number of endpoints. The code is accessing hard-coded second endpoint ("interface->endpoint[1].desc") which may not exist. It would be great to handle this in the same patch too. * All the concerns above are resolved by already-accepted commit fa52bd50 ("[media] usbvision: fix crash on detecting device with invalid configuration") * Mailing list message: http://www.spinics.net/lists/linux-media/msg94832.htmlSigned-off-by:
Vladis Dronov <vdronov@redhat.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Luis Henriques <luis.henriques@canonical.com> [bwh: Backported to 3.2: adjust filename] Signed-off-by:
-
Jan Kara authored
commit 07393101 upstream. When file permissions are modified via chmod(2) and the user is not in the owning group or capable of CAP_FSETID, the setgid bit is cleared in inode_change_ok(). Setting a POSIX ACL via setxattr(2) sets the file permissions as well as the new ACL, but doesn't clear the setgid bit in a similar way; this allows to bypass the check in chmod(2). Fix that. References: CVE-2016-7097 Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> [bwh: Backported to 3.2: - Drop changes to ceph, f2fs, hfsplus, orangefs - Use capable() instead of capable_wrt_inode_uidgid() - Update ext3 and generic_acl.c as well - In gfs2, jfs, and xfs, take care to avoid leaking the allocated ACL if posix_acl_update_mode() determines it's not needed - Adjust context] Signed-off-by:
-
Liu Bo authored
commit 755ac67f upstream. If the acl can be exactly represented in the traditional file mode permission bits, we don't set another acl attribute. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com> Signed-off-by:
-
Jan Kara authored
commit 030b533c upstream. Currently, notify_change() clears capabilities or IMA attributes by calling security_inode_killpriv() before calling into ->setattr. Thus it happens before any other permission checks in inode_change_ok() and user is thus allowed to trigger clearing of capabilities or IMA attributes for any file he can look up e.g. by calling chown for that file. This is unexpected and can lead to user DoSing a system. Fix the problem by calling security_inode_killpriv() at the end of inode_change_ok() instead of from notify_change(). At that moment we are sure user has permissions to do the requested change. References: CVE-2015-1350 Reviewed-by:
-
Jan Kara authored
commit 31051c85 upstream. inode_change_ok() will be resposible for clearing capabilities and IMA extended attributes and as such will need dentry. Give it as an argument to inode_change_ok() instead of an inode. Also rename inode_change_ok() to setattr_prepare() to better relect that it does also some modifications in addition to checks. Reviewed-by:
-
Stefan Richter authored
commit 667121ac upstream. The IP-over-1394 driver firewire-net lacked input validation when handling incoming fragmented datagrams. A maliciously formed fragment with a respectively large datagram_offset would cause a memcpy past the datagram buffer. So, drop any packets carrying a fragment with offset + length larger than datagram_size. In addition, ensure that - GASP header, unfragmented encapsulation header, or fragment encapsulation header actually exists before we access it, - the encapsulated datagram or fragment is of nonzero size. Reported-by:
Eyal Itkin <eyal.itkin@gmail.com> Reviewed-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> [bwh: Backported to 3.2: fwnet_receive_broadcast() never matches IPv6 packets] Signed-off-by:
-
Dan Carpenter authored
commit 7bc2b55a upstream. We need to put an upper bound on "user_len" so the memcpy() doesn't overflow. Reported-by:
Marco Grassi <marco.gra@gmail.com> Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
David Howells authored
commit 03dab869 upstream. This fixes CVE-2016-7042. Fix a short sprintf buffer in proc_keys_show(). If the gcc stack protector is turned on, this can cause a panic due to stack corruption. The problem is that xbuf[] is not big enough to hold a 64-bit timeout rendered as weeks: (gdb) p 0xffffffffffffffffULL/(60*60*24*7) $2 = 30500568904943 That's 14 chars plus NUL, not 11 chars plus NUL. Expand the buffer to 16 chars. I think the unpatched code apparently works if the stack-protector is not enabled because on a 32-bit machine the buffer won't be overflowed and on a 64-bit machine there's a 64-bit aligned pointer at one side and an int that isn't checked again on the other side. The panic incurred looks something like: Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81352ebe CPU: 0 PID: 1692 Comm: reproducer Not tainted 4.7.2-201.fc24.x86_64 #1 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 0000000000000086 00000000fbbd2679 ffff8800a044bc00 ffffffff813d941f ffffffff81a28d58 ffff8800a044bc98 ffff8800a044bc88 ffffffff811b2cb6 ffff880000000010 ffff8800a044bc98 ffff8800a044bc30 00000000fbbd2679 Call Trace: [<ffffffff813d941f>] dump_stack+0x63/0x84 [<ffffffff811b2cb6>] panic+0xde/0x22a [<ffffffff81352ebe>] ? proc_keys_show+0x3ce/0x3d0 [<ffffffff8109f7f9>] __stack_chk_fail+0x19/0x30 [<ffffffff81352ebe>] proc_keys_show+0x3ce/0x3d0 [<ffffffff81350410>] ? key_validate+0x50/0x50 [<ffffffff8134db30>] ? key_default_cmp+0x20/0x20 [<ffffffff8126b31c>] seq_read+0x2cc/0x390 [<ffffffff812b6b12>] proc_reg_read+0x42/0x70 [<ffffffff81244fc7>] __vfs_read+0x37/0x150 [<ffffffff81357020>] ? security_file_permission+0xa0/0xc0 [<ffffffff81246156>] vfs_read+0x96/0x130 [<ffffffff81247635>] SyS_read+0x55/0xc0 [<ffffffff817eb872>] entry_SYSCALL_64_fastpath+0x1a/0xa4 Reported-by:
Ondrej Kozina <okozina@redhat.com> Signed-off-by:
David Howells <dhowells@redhat.com> Tested-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Jaganath Kanakkassery authored
commit 951b6a07 upstream. addr can be NULL and it should not be dereferenced before NULL checking. Signed-off-by:
Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> [bwh: Backported to 3.2: - There's no 'chan' variable - Keep using batostr() to log addresses - Adjust context] Signed-off-by:
-
zhong jiang authored
commit 5b398e41 upstream. I hit the following hung task when runing a OOM LTP test case with 4.1 kernel. Call trace: [<ffffffc000086a88>] __switch_to+0x74/0x8c [<ffffffc000a1bae0>] __schedule+0x23c/0x7bc [<ffffffc000a1c09c>] schedule+0x3c/0x94 [<ffffffc000a1eb84>] rwsem_down_write_failed+0x214/0x350 [<ffffffc000a1e32c>] down_write+0x64/0x80 [<ffffffc00021f794>] __ksm_exit+0x90/0x19c [<ffffffc0000be650>] mmput+0x118/0x11c [<ffffffc0000c3ec4>] do_exit+0x2dc/0xa74 [<ffffffc0000c46f8>] do_group_exit+0x4c/0xe4 [<ffffffc0000d0f34>] get_signal+0x444/0x5e0 [<ffffffc000089fcc>] do_signal+0x1d8/0x450 [<ffffffc00008a35c>] do_notify_resume+0x70/0x78 The oom victim cannot terminate because it needs to take mmap_sem for write while the lock is held by ksmd for read which loops in the page allocator ksm_do_scan scan_get_next_rmap_item down_read get_next_rmap_item alloc_rmap_item #ksmd will loop permanently. There is no way forward because the oom victim cannot release any memory in 4.1 based kernel. Since 4.6 we have the oom reaper which would solve this problem because it would release the memory asynchronously. Nevertheless we can relax alloc_rmap_item requirements and use __GFP_NORETRY because the allocation failure is acceptable as ksm_do_scan would just retry later after the lock got dropped. Such a patch would be also easy to backport to older stable kernels which do not have oom_reaper. While we are at it add GFP_NOWARN so the admin doesn't have to be alarmed by the allocation failure. Link: http://lkml.kernel.org/r/1474165570-44398-1-git-send-email-zhongjiang@huawei.comSigned-off-by:
zhong jiang <zhongjiang@huawei.com> Suggested-by:
Hugh Dickins <hughd@google.com> Suggested-by:
Michal Hocko <mhocko@suse.cz> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Nikolay Aleksandrov authored
commit 2cf75070 upstream. Since the commit below the ipmr/ip6mr rtnl_unicast() code uses the portid instead of the previous dst_pid which was copied from in_skb's portid. Since the skb is new the portid is 0 at that point so the packets are sent to the kernel and we get scheduling while atomic or a deadlock (depending on where it happens) by trying to acquire rtnl two times. Also since this is RTM_GETROUTE, it can be triggered by a normal user. Here's the sleeping while atomic trace: [ 7858.212557] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ 7858.212748] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/0 [ 7858.212881] 2 locks held by swapper/0/0: [ 7858.213013] #0: (((&mrt->ipmr_expire_timer))){+.-...}, at: [<ffffffff810fbbf5>] call_timer_fn+0x5/0x350 [ 7858.213422] #1: (mfc_unres_lock){+.....}, at: [<ffffffff8161e005>] ipmr_expire_process+0x25/0x130 [ 7858.213807] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.0-rc7+ #179 [ 7858.213934] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 7858.214108] 0000000000000000 ffff88005b403c50 ffffffff813a7804 0000000000000000 [ 7858.214412] ffffffff81a1338e ffff88005b403c78 ffffffff810a4a72 ffffffff81a1338e [ 7858.214716] 000000000000026c 0000000000000000 ffff88005b403ca8 ffffffff810a4b9f [ 7858.215251] Call Trace: [ 7858.215412] <IRQ> [<ffffffff813a7804>] dump_stack+0x85/0xc1 [ 7858.215662] [<ffffffff810a4a72>] ___might_sleep+0x192/0x250 [ 7858.215868] [<ffffffff810a4b9f>] __might_sleep+0x6f/0x100 [ 7858.216072] [<ffffffff8165bea3>] mutex_lock_nested+0x33/0x4d0 [ 7858.216279] [<ffffffff815a7a5f>] ? netlink_lookup+0x25f/0x460 [ 7858.216487] [<ffffffff8157474b>] rtnetlink_rcv+0x1b/0x40 [ 7858.216687] [<ffffffff815a9a0c>] netlink_unicast+0x19c/0x260 [ 7858.216900] [<ffffffff81573c70>] rtnl_unicast+0x20/0x30 [ 7858.217128] [<ffffffff8161cd39>] ipmr_destroy_unres+0xa9/0xf0 [ 7858.217351] [<ffffffff8161e06f>] ipmr_expire_process+0x8f/0x130 [ 7858.217581] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.217785] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.217990] [<ffffffff810fbc95>] call_timer_fn+0xa5/0x350 [ 7858.218192] [<ffffffff810fbbf5>] ? call_timer_fn+0x5/0x350 [ 7858.218415] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.218656] [<ffffffff810fde10>] run_timer_softirq+0x260/0x640 [ 7858.218865] [<ffffffff8166379b>] ? __do_softirq+0xbb/0x54f [ 7858.219068] [<ffffffff816637c8>] __do_softirq+0xe8/0x54f [ 7858.219269] [<ffffffff8107a948>] irq_exit+0xb8/0xc0 [ 7858.219463] [<ffffffff81663452>] smp_apic_timer_interrupt+0x42/0x50 [ 7858.219678] [<ffffffff816625bc>] apic_timer_interrupt+0x8c/0xa0 [ 7858.219897] <EOI> [<ffffffff81055f16>] ? native_safe_halt+0x6/0x10 [ 7858.220165] [<ffffffff810d64dd>] ? trace_hardirqs_on+0xd/0x10 [ 7858.220373] [<ffffffff810298e3>] default_idle+0x23/0x190 [ 7858.220574] [<ffffffff8102a20f>] arch_cpu_idle+0xf/0x20 [ 7858.220790] [<ffffffff810c9f8c>] default_idle_call+0x4c/0x60 [ 7858.221016] [<ffffffff810ca33b>] cpu_startup_entry+0x39b/0x4d0 [ 7858.221257] [<ffffffff8164f995>] rest_init+0x135/0x140 [ 7858.221469] [<ffffffff81f83014>] start_kernel+0x50e/0x51b [ 7858.221670] [<ffffffff81f82120>] ? early_idt_handler_array+0x120/0x120 [ 7858.221894] [<ffffffff81f8243f>] x86_64_start_reservations+0x2a/0x2c [ 7858.222113] [<ffffffff81f8257c>] x86_64_start_kernel+0x13b/0x14a Fixes: 2942e900 ("[RTNETLINK]: Use rtnl_unicast() for rtnetlink unicasts") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: - Use 'pid' instead of 'portid' where necessary - Adjust context] Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 1245800c upstream. The iter->seq can be reset outside the protection of the mutex. So can reading of user data. Move the mutex up to the beginning of the function. Fixes: d7350c3f ("tracing/core: make the read callbacks reentrants") Reported-by:
Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Sergei Miroshnichenko authored
commit 9abefcb1 upstream. A timer was used to restart after the bus-off state, leading to a relatively large can_restart() executed in an interrupt context, which in turn sets up pinctrl. When this happens during system boot, there is a high probability of grabbing the pinctrl_list_mutex, which is locked already by the probe() of other device, making the kernel suspect a deadlock condition [1]. To resolve this issue, the restart_timer is replaced by a delayed work. [1] https://github.com/victronenergy/venus/issues/24Signed-off-by:
Sergei Miroshnichenko <sergeimir@emcraft.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Jeff Mahoney authored
commit 325c50e3 upstream. If the subvol/snapshot create/destroy ioctls are passed a regular file with execute permissions set, we'll eventually Oops while trying to do inode->i_op->lookup via lookup_one_len. This patch ensures that the file descriptor refers to a directory. Fixes: cb8e7090 (Btrfs: Fix subvolume creation locking rules) Fixes: 76dda93c (Btrfs: add snapshot/subvolume destroy ioctl) Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
Chris Mason <clm@fb.com> [bwh: Backported to 3.2: - Open-code file_inode() - Adjust context] Signed-off-by:
-
Yadi.hu authored
commit 371a0153 upstream. the eg20t driver call request_irq() function before the pch_base_address, base address of i2c controller's register, is assigned an effective value. there is one possible scenario that an interrupt which isn't inside eg20t arrives immediately after request_irq() is executed when i2c controller shares an interrupt number with others. since the interrupt handler pch_i2c_handler() has already active as shared action, it will be called and read its own register to determine if this interrupt is from itself. At that moment, since base address of i2c registers is not remapped in kernel space yet,so the INT handler will access an illegal address and then a error occurs. Signed-off-by:
Yadi.hu <yadi.hu@windriver.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Ashish Samant authored
commit d21c353d upstream. If we punch a hole on a reflink such that following conditions are met: 1. start offset is on a cluster boundary 2. end offset is not on a cluster boundary 3. (end offset is somewhere in another extent) or (hole range > MAX_CONTIG_BYTES(1MB)), we dont COW the first cluster starting at the start offset. But in this case, we were wrongly passing this cluster to ocfs2_zero_range_for_truncate() to zero out. This will modify the cluster in place and zero it in the source too. Fix this by skipping this cluster in such a scenario. To reproduce: 1. Create a random file of say 10 MB xfs_io -c 'pwrite -b 4k 0 10M' -f 10MBfile 2. Reflink it reflink -f 10MBfile reflnktest 3. Punch a hole at starting at cluster boundary with range greater that 1MB. You can also use a range that will put the end offset in another extent. fallocate -p -o 0 -l 1048615 reflnktest 4. sync 5. Check the first cluster in the source file. (It will be zeroed out). dd if=10MBfile iflag=direct bs=<cluster size> count=1 | hexdump -C Link: http://lkml.kernel.org/r/1470957147-14185-1-git-send-email-ashish.samant@oracle.comSigned-off-by:
Ashish Samant <ashish.samant@oracle.com> Reported-by:
Saar Maoz <saar.maoz@oracle.com> Reviewed-by:
Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Eric Ren <zren@suse.com> Signed-off-by:
-
Joseph Qi authored
commit e6f0c6e6 upstream. Commit ac7cf246 ("ocfs2/dlm: fix race between convert and recovery") checks if lockres master has changed to identify whether new master has finished recovery or not. This will introduce a race that right after old master does umount ( means master will change), a new convert request comes. In this case, it will reset lockres state to DLM_RECOVERING and then retry convert, and then fail with lockres->l_action being set to OCFS2_AST_INVALID, which will cause inconsistent lock level between ocfs2 and dlm, and then finally BUG. Since dlm recovery will clear lock->convert_pending in dlm_move_lockres_to_recovery_list, we can use it to correctly identify the race case between convert and recovery. So fix it. Fixes: ac7cf246 ("ocfs2/dlm: fix race between convert and recovery") Link: http://lkml.kernel.org/r/57CE1569.8010704@huawei.comSigned-off-by:
Joseph Qi <joseph.qi@huawei.com> Signed-off-by:
Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
Ilan Tayari authored
commit b5884793 upstream. commit 1a6509d9 ("[IPSEC]: Add support for combined mode algorithms") introduced aead. The function attach_aead kmemdup()s the algorithm name during xfrm_state_construct(). However this memory is never freed. Implementation has since been slightly modified in commit ee5c2317 ("xfrm: Clone states properly on migration") without resolving this leak. This patch adds a kfree() call for the aead algorithm name. Fixes: 1a6509d9 ("[IPSEC]: Add support for combined mode algorithms") Signed-off-by:
Ilan Tayari <ilant@mellanox.com> Acked-by:
Rami Rosen <roszenrami@gmail.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Guenter Roeck authored
commit 8e4b7205 upstream. Since commit acb2505d ("openrisc: fix copy_from_user()"), copy_from_user() returns the number of bytes requested, not the number of bytes not copied. Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: acb2505d ("openrisc: fix copy_from_user()") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Guenter Roeck authored
commit 65c0044c upstream. avr32 builds fail with: arch/avr32/kernel/built-in.o: In function `arch_ptrace': (.text+0x650): undefined reference to `___copy_from_user' arch/avr32/kernel/built-in.o:(___ksymtab+___copy_from_user+0x0): undefined reference to `___copy_from_user' kernel/built-in.o: In function `proc_doulongvec_ms_jiffies_minmax': (.text+0x5dd8): undefined reference to `___copy_from_user' kernel/built-in.o: In function `proc_dointvec_minmax_sysadmin': sysctl.c:(.text+0x6174): undefined reference to `___copy_from_user' kernel/built-in.o: In function `ptrace_has_cap': ptrace.c:(.text+0x69c0): undefined reference to `___copy_from_user' kernel/built-in.o:ptrace.c:(.text+0x6b90): more undefined references to `___copy_from_user' follow Fixes: 8630c322 ("avr32: fix copy_from_user()") Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by:
Havard Skinnemoen <hskinnemoen@gmail.com> Acked-by:
Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Signed-off-by:
-
phil.turnbull@oracle.com authored
commit 8ab86c00 upstream. skb is not freed if newsk is NULL. Rework the error path so free_skb is unconditionally called on function exit. Fixes: c3ea9fa2 ("[IrDA] af_irda: IRDA_ASSERT cleanups") Signed-off-by:
Phil Turnbull <phil.turnbull@oracle.com> Signed-off-by:
-
Alex Vesker authored
commit 344bacca upstream. This fix solves a race between light flush and on the fly joins. Light flush doesn't set the device to down and unset IPOIB_OPER_UP flag, this means that if while flushing we have a MC join in progress and the QP was attached to BC MGID we can have a mismatches when re-attaching a QP to the BC MGID. The light flush would set the broadcast group to NULL causing an on the fly join to rejoin and reattach to the BC MCG as well as adding the BC MGID to the multicast list. The flush process would later on remove the BC MGID and detach it from the QP. On the next flush the BC MGID is present in the multicast list but not found when trying to detach it because of the previous double attach and single detach. [18332.714265] ------------[ cut here ]------------ [18332.717775] WARNING: CPU: 6 PID: 3767 at drivers/infiniband/core/verbs.c:280 ib_dealloc_pd+0xff/0x120 [ib_core] ... [18332.775198] Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011 [18332.779411] 0000000000000000 ffff8800b50dfbb0 ffffffff813fed47 0000000000000000 [18332.784960] 0000000000000000 ffff8800b50dfbf0 ffffffff8109add1 0000011832f58300 [18332.790547] ffff880226a596c0 ffff880032482000 ffff880032482830 ffff880226a59280 [18332.796199] Call Trace: [18332.798015] [<ffffffff813fed47>] dump_stack+0x63/0x8c [18332.801831] [<ffffffff8109add1>] __warn+0xd1/0xf0 [18332.805403] [<ffffffff8109aebd>] warn_slowpath_null+0x1d/0x20 [18332.809706] [<ffffffffa025d90f>] ib_dealloc_pd+0xff/0x120 [ib_core] [18332.814384] [<ffffffffa04f3d7c>] ipoib_transport_dev_cleanup+0xfc/0x1d0 [ib_ipoib] [18332.820031] [<ffffffffa04ed648>] ipoib_ib_dev_cleanup+0x98/0x110 [ib_ipoib] [18332.825220] [<ffffffffa04e62c8>] ipoib_dev_cleanup+0x2d8/0x550 [ib_ipoib] [18332.830290] [<ffffffffa04e656f>] ipoib_uninit+0x2f/0x40 [ib_ipoib] [18332.834911] [<ffffffff81772a8a>] rollback_registered_many+0x1aa/0x2c0 [18332.839741] [<ffffffff81772bd1>] rollback_registered+0x31/0x40 [18332.844091] [<ffffffff81773b18>] unregister_netdevice_queue+0x48/0x80 [18332.848880] [<ffffffffa04f489b>] ipoib_vlan_delete+0x1fb/0x290 [ib_ipoib] [18332.853848] [<ffffffffa04df1cd>] delete_child+0x7d/0xf0 [ib_ipoib] [18332.858474] [<ffffffff81520c08>] dev_attr_store+0x18/0x30 [18332.862510] [<ffffffff8127fe4a>] sysfs_kf_write+0x3a/0x50 [18332.866349] [<ffffffff8127f4e0>] kernfs_fop_write+0x120/0x170 [18332.870471] [<ffffffff81207198>] __vfs_write+0x28/0xe0 [18332.874152] [<ffffffff810e09bf>] ? percpu_down_read+0x1f/0x50 [18332.878274] [<ffffffff81208062>] vfs_write+0xa2/0x1a0 [18332.881896] [<ffffffff812093a6>] SyS_write+0x46/0xa0 [18332.885632] [<ffffffff810039b7>] do_syscall_64+0x57/0xb0 [18332.889709] [<ffffffff81883321>] entry_SYSCALL64_slow_path+0x25/0x25 [18332.894727] ---[ end trace 09ebbe31f831ef17 ]--- Fixes: ee1e2c82 ("IPoIB: Refresh paths instead of flushing them on SM change events") Signed-off-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Alan Stern authored
commit 08c5cd37 upstream. Some full-speed mceusb infrared transceivers contain invalid endpoint descriptors for their interrupt endpoints, with bInterval set to 0. In the past they have worked out okay with the mceusb driver, because the driver sets the bInterval field in the descriptor to 1, overwriting whatever value may have been there before. However, this approach was never sanctioned by the USB core, and in fact it does not work with xHCI controllers, because they use the bInterval value that was present when the configuration was installed. Currently usbcore uses 32 ms as the default interval if the value in the endpoint descriptor is invalid. It turns out that these IR transceivers don't work properly unless the interval is set to 10 ms or below. To work around this mceusb problem, this patch changes the endpoint-descriptor parsing routine, making the default interval value be 10 ms rather than 32 ms. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Tested-by:
Wade Berrier <wberrier@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Al Viro authored
commit 8630c322 upstream. really ugly, but apparently avr32 compilers turns access_ok() into something so bad that they want it in assembler. Left that way, zeroing added in inline wrapper. Signed-off-by:
-
Al Viro authored
commit e98b9e37 upstream. Signed-off-by:
-
Al Viro authored
commit d0cf3851 upstream. Signed-off-by:
-
Al Viro authored
commit c90a3bc5 upstream. Signed-off-by:
-
Al Viro authored
commit 8f035983 upstream. Signed-off-by:
-
Al Viro authored
commit 917400ce upstream. Acked-by:
-
Al Viro authored
commit 6e050503 upstream. Signed-off-by:
-
Al Viro authored
commit c6852389 upstream. It could be done in exception-handling bits in __get_user_b() et.al., but the surgery involved would take more knowledge of sh64 details than I have or _want_ to have. Signed-off-by:
-
Al Viro authored
commit b615e3c7 upstream. Signed-off-by:
-
