- 17 May, 2016 2 commits
-
-
Andreas Gruenbacher authored
The btrfs_{set,remove}xattr inode operations check for a read-only root (btrfs_root_readonly) before calling into generic_{set,remove}xattr. If this check is moved into __btrfs_setxattr, we can get rid of btrfs_{set,remove}xattr. This patch applies to mainline, I would like to keep it together with the other xattr cleanups if possible, though. Could you please review? Thanks, Andreas Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Andreas Gruenbacher authored
Ubifs internally uses special inodes for storing xattrs. Those inodes had NULL {get,set,remove}xattr inode operations before this change, so xattr operations on them would fail. The super block's s_xattr field would also apply to those special inodes. However, the inodes are not visible outside of ubifs, and so no xattr operations will ever be carried out on them anyway. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
- 13 May, 2016 3 commits
-
-
Andreas Gruenbacher authored
This is mostly the same as on other filesystems except for attribute names with an "os2." prefix: for those, the prefix is not stored on disk, and on-attribute names without a prefix have "os2." added. As on several other filesystems, the underlying function for setting/removing xattrs (__jfs_setxattr) removes attributes when the value is NULL, so the set xattr handlers will work as expected. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Andreas Gruenbacher authored
Instead of stripping "os2." prefixes in __jfs_setxattr, make callers strip them, as __jfs_getxattr already does. With that change, use the same name mapping function in jfs_{get,set,remove}xattr. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Switch to the generic xattr handlers and take the necessary glocks at the layer below. The following are the new xattr "entry points"; they are called with the glock held already in the following cases: gfs2_xattr_get: From SELinux, during lookups. gfs2_xattr_set: The glock is never held. gfs2_get_acl: From gfs2_create_inode -> posix_acl_create and gfs2_setattr -> posix_acl_chmod. gfs2_set_acl: From gfs2_setattr -> posix_acl_chmod. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
- 23 Apr, 2016 3 commits
-
-
Yan, Zheng authored
when removing a xattr, generic_removexattr() calls __ceph_setxattr() with NULL value and XATTR_REPLACE flag. __ceph_removexattr() is not used any more. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Andreas Gruenbacher authored
Add a catch-all xattr handler at the end of ceph_xattr_handlers. Check for valid attribute names there, and remove those checks from __ceph_{get,set,remove}xattr instead. No "system.*" xattrs need to be handled by the catch-all handler anymore. The set xattr handler is called with a NULL value to indicate that the attribute should be removed; __ceph_setxattr already handles that case correctly (ceph_set_acl could already calling __ceph_setxattr with a NULL value). Move the check for snapshots from ceph_{set,remove}xattr into __ceph_{set,remove}xattr. With that, ceph_{get,set,remove}xattr can be replaced with the generic iops. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Andreas Gruenbacher authored
Create a variant of ceph_setattr that takes an inode instead of a dentry. Change __ceph_setxattr (and also __ceph_removexattr) to take an inode instead of a dentry. Use those in ceph_set_acl so that we no longer need a dentry there. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
- 11 Apr, 2016 2 commits
-
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
... and do not assume they are already attached to each other Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
- 10 Apr, 2016 3 commits
-
-
Al Viro authored
reiserfs_xattr_[sg]et() will fail with -EOPNOTSUPP for V1 inodes anyway, and all reiserfs instances of ->[sg]et() call it and so does ->set_acl(). Checks for name length in the instances had been bogus; they should've been "bugger off if it's _exactly_ the prefix" (as generic would do on its own) and not "bugger off if it's shorter than the prefix" - that can't happen. xattr_full_name() is needed to adjust for the fact that generic instances will skip the prefix in the name passed to ->[gs]et(); reiserfs homegrown analogues didn't. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
none of that stuff can ever be called for NULL or negative dentry. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
... and neither can ever be NULL Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
- 31 Mar, 2016 2 commits
-
-
Andreas Gruenbacher authored
acl_by_type(inode, type) returns a pointer to either inode->i_acl or inode->i_default_acl depending on type. This is useful in fs/posix_acl.c, but should never have been visible outside that file. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Andreas Gruenbacher authored
When get_acl() is called for an inode whose ACL is not cached yet, the get_acl inode operation is called to fetch the ACL from the filesystem. The inode operation is responsible for updating the cached acl with set_cached_acl(). This is done without locking at the VFS level, so another task can call set_cached_acl() or forget_cached_acl() before the get_acl inode operation gets to calling set_cached_acl(), and then get_acl's call to set_cached_acl() results in caching an outdate ACL. Prevent this from happening by setting the cached ACL pointer to a task-specific sentinel value before calling the get_acl inode operation. Move the responsibility for updating the cached ACL from the get_acl inode operations to get_acl(). There, only set the cached ACL if the sentinel value hasn't changed. The sentinel values are chosen to have odd values. Likewise, the value of ACL_NOT_CACHED is odd. In contrast, ACL object pointers always have an even value (ACLs are aligned in memory). This allows to distinguish uncached ACLs values from ACL objects. In addition, switch from guarding inode->i_acl and inode->i_default_acl upates by the inode->i_lock spinlock to using xchg() and cmpxchg(). Filesystems that do not want ACLs returned from their get_acl inode operations to be cached must call forget_cached_acl() to prevent the VFS from doing so. (Patch written by Al Viro and Andreas Gruenbacher.) Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
- 28 Mar, 2016 2 commits
-
-
Andreas Gruenbacher authored
The get_acl inode operation is called only when no ACL is cached. It makes no sense to check for a cached ACL as the first thing inside such inode operations. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
- 26 Mar, 2016 15 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull Ceph updates from Sage Weil: "There is quite a bit here, including some overdue refactoring and cleanup on the mon_client and osd_client code from Ilya, scattered writeback support for CephFS and a pile of bug fixes from Zheng, and a few random cleanups and fixes from others" [ I already decided not to pull this because of it having been rebased recently, but ended up changing my mind after all. Next time I'll really hold people to it. Oh well. - Linus ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (34 commits) libceph: use KMEM_CACHE macro ceph: use kmem_cache_zalloc rbd: use KMEM_CACHE macro ceph: use lookup request to revalidate dentry ceph: kill ceph_get_dentry_parent_inode() ceph: fix security xattr deadlock ceph: don't request vxattrs from MDS ceph: fix mounting same fs multiple times ceph: remove unnecessary NULL check ceph: avoid updating directory inode's i_size accidentally ceph: fix race during filling readdir cache libceph: use sizeof_footer() more ceph: kill ceph_empty_snapc ceph: fix a wrong comparison ceph: replace CURRENT_TIME by current_fs_time() ceph: scattered page writeback libceph: add helper that duplicates last extent operation libceph: enable large, variable-sized OSD requests libceph: osdc->req_mempool should be backed by a slab pool libceph: make r_request msg_size calculation clearer ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linuxLinus Torvalds authored
Pull orangefs filesystem from Mike Marshall. This finally merges the long-pending orangefs filesystem, which has been much cleaned up with input from Al Viro over the last six months. From the documentation file: "OrangeFS is an LGPL userspace scale-out parallel storage system. It is ideal for large storage problems faced by HPC, BigData, Streaming Video, Genomics, Bioinformatics. Orangefs, originally called PVFS, was first developed in 1993 by Walt Ligon and Eric Blumer as a parallel file system for Parallel Virtual Machine (PVM) as part of a NASA grant to study the I/O patterns of parallel programs. Orangefs features include: - Distributes file data among multiple file servers - Supports simultaneous access by multiple clients - Stores file data and metadata on servers using local file system and access methods - Userspace implementation is easy to install and maintain - Direct MPI support - Stateless" see Documentation/filesystems/orangefs.txt for more in-depth details. * tag 'ofs-pull-tag-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: (174 commits) orangefs: fix orangefs_superblock locking orangefs: fix do_readv_writev() handling of error halfway through orangefs: have ->kill_sb() evict the VFS side of things first orangefs: sanitize ->llseek() orangefs-bufmap.h: trim unused junk orangefs: saner calling conventions for getting a slot orangefs_copy_{to,from}_bufmap(): don't pass bufmap pointer orangefs: get rid of readdir_handle_s ornagefs: ensure that truncate has an up to date inode size orangefs: move code which sets i_link to orangefs_inode_getattr orangefs: remove needless wrapper around GFP_KERNEL orangefs: remove wrapper around mutex_lock(&inode->i_mutex) orangefs: refactor inode type or link_target change detection orangefs: use new getattr for revalidate and remove old getattr orangefs: use new getattr in inode getattr and permission orangefs: use new orangefs_inode_getattr to get size in write and llseek orangefs: use new orangefs_inode_getattr to create new inodes orangefs: rename orangefs_inode_getattr to orangefs_inode_old_getattr orangefs: remove inode->i_lock wrapper orangefs: put register_chrdev immediately before register_filesystem ...
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB bug fixes from Jon Mason: "NTB bug fixes for tasklet from spinning forever, link errors, translation window setup, NULL ptr dereference, and ntb-perf errors. Also, a modification to the driver API that makes _addr functions optional" * tag 'ntb-4.6' of git://github.com/jonmason/ntb: NTB: Remove _addr functions from ntb_hw_amd NTB: Make _addr functions optional in the API NTB: Fix incorrect clean up routine in ntb_perf NTB: Fix incorrect return check in ntb_perf ntb: fix possible NULL dereference ntb: add missing setup of translation window ntb: stop link work when we do not have memory ntb: stop tasklet from spinning forever during shutdown. ntb: perf test: fix address space confusion
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "The only new stuff which missed the first pull request is an update to the UFS driver. The rest is an assortment of bug fixes and minor tweaks which appeared recently (some are fixes for recent code and some are stuff spotted recently by the checkers or the new gcc-6 compiler [most of Arnd's stuff])" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits) scsi_common: do not clobber fixed sense information scsi: ufs: select CONFIG_NLS scsi: fc: use get/put_unaligned64 for wwn access fnic: move printk()s outside of the critical code section. qla2xxx: avoid maybe_uninitialized warning megaraid_sas: add missing curly braces in ioctl handler lpfc: fix misleading indentation scsi_transport_sas: add 'scsi_target_id' sysfs attribute scsi_dh_alua: uninitialized variable in alua_check_vpd() scsi: ufs-qcom: add printouts of testbus debug registers scsi: ufs-qcom: enable/disable the device ref clock scsi: ufs-qcom: set PA_Local_TX_LCC_Enable before link startup scsi: ufs: add device quirk delay before putting UFS rails in LPM scsi: ufs: fix leakage during link off state scsi: ufs: tune UniPro parameters to optimize hibern8 exit time scsi: ufs: handle non spec compliant bkops behaviour by device scsi: ufs: add retry for query descriptors scsi: ufs: add error recovery after DL NAC error scsi: ufs: make error handling bit faster scsi: ufs: disable vccq if it's not needed by UFS device ...
-
Linus Torvalds authored
Commit 0b81d077 ("fs crypto: move per-file encryption from f2fs tree to fs/crypto") moved the f2fs crypto files to fs/crypto/ and renamed the symbol prefixes from "f2fs_" to "fscrypt_" (and from "F2FS_" to just "FS" for preprocessor symbols). Because of the symbol renaming, it's a bit hard to see it as a file move: use git show -M30 0b81d077 to lower the rename detection to just 30% similarity and make git show the files as renamed (the header file won't be shown as a rename even then - since all it contains is symbol definitions, it looks almost completely different). Even with the renames showing as renames, the diffs are not all that easy to read, since so much is just the renames. But Eric Biggers noticed that it's not just all renames: the initialization of the xts_tweak had been broken too, using the inode number rather than the page offset. That's not right - it makes the xfs_tweak the same for all pages of each inode. It _might_ make sense to make the xfs_tweak contain both the offset _and_ the inode number, but not just the inode number. Reported-by: Eric Biggers <ebiggers3@gmail.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Allen Hubbe authored
Kernel zero day testing warned about address space confusion. A virtual iomem address was used where a physical address is expected. The offending functions implement an optional part of the api, so they are removed. They can be added later, after testing. Fixes: a1b36958Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Acked-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
-
Al Viro authored
* switch orangefs_remount() to taking ORANGEFS_SB(sb) instead of sb * remove from the list _before_ orangefs_unmount() - request_mutex in the latter will make sure that nothing observed in the loop in ORANGEFS_DEV_REMOUNT_ALL handling will get freed until the end of loop * on removal, keep the forward pointer and zero the back one. That way we can drop and regain the spinlock in the loop body (again, ORANGEFS_DEV_REMOUNT_ALL one) and still be able to get to the rest of the list. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
-
Al Viro authored
Error should only be returned if nothing had been read/written. Otherwise we need to report a short read/write instead. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
-
Al Viro authored
a) open files can't have NULL inodes b) it's SEEK_END, not ORANGEFS_SEEK_END; no need to get cute. c) make_bad_inode() on lseek()? Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
-
Al Viro authored
just have it return the slot number or -E... - the caller checks the sign anyway Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
-
Al Viro authored
it's always __orangefs_bufmap Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
-
Al Viro authored
no point, really - we couldn't keep those across the calls of getdents(); it would be too easy to DoS, having all slots exhausted. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
-
- 25 Mar, 2016 8 commits
-
-
Linus Torvalds authored
Merge fourth patch-bomb from Andrew Morton: "A lot more stuff than expected, sorry. A bunch of ocfs2 reviewing was finished off. - mhocko's oom-reaper out-of-memory-handler changes - ocfs2 fixes and features - KASAN feature work - various fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (42 commits) thp: fix typo in khugepaged_scan_pmd() MAINTAINERS: fill entries for KASAN mm/filemap: generic_file_read_iter(): check for zero reads unconditionally kasan: test fix: warn if the UAF could not be detected in kmalloc_uaf2 mm, kasan: stackdepot implementation. Enable stackdepot for SLAB arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections mm, kasan: add GFP flags to KASAN API mm, kasan: SLAB support kasan: modify kmalloc_large_oob_right(), add kmalloc_pagealloc_oob_right() include/linux/oom.h: remove undefined oom_kills_count()/note_oom_kill() mm/page_alloc: prevent merging between isolated and other pageblocks drivers/memstick/host/r592.c: avoid gcc-6 warning ocfs2: extend enough credits for freeing one truncate record while replaying truncate records ocfs2: extend transaction for ocfs2_remove_rightmost_path() and ocfs2_update_edge_lengths() before to avoid inconsistency between inode and et ocfs2/dlm: move lock to the tail of grant queue while doing in-place convert ocfs2: solve a problem of crossing the boundary in updating backups ocfs2: fix occurring deadlock by changing ocfs2_wq from global to local ocfs2/dlm: fix BUG in dlm_move_lockres_to_recovery_list ocfs2/dlm: fix race between convert and recovery ocfs2: fix a deadlock issue in ocfs2_dio_end_io_write() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixlet from Rafael Wysocki: "One of commits in my previous pull request changed the permissions of drivers/power/avs/rockchip-io-domain.c to executable by mistake" * tag 'pm+acpi-4.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Fix permissions of drivers/power/avs/rockchip-io-domain.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linuxLinus Torvalds authored
Pull ia64 update from Tony Luck: "Wire up new system calls p{read,write}v2 for ia64" * tag 'please-pull-preadv2' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Enable preadv2 and pwritev2 syscalls for ia64
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull more input updates from Dmitry Torokhov: "Second round of updates for the input subsystem. The BYD PS/2 protocol driver now uses absolute reporting mode and should behave more like other touchpads; Synaptics driver needed to extend one of its quirks to a newer firmware version, and a few USB drivers got tightened up checks for the contents of their descriptors" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: sur40 - fix DMA on stack Input: ati_remote2 - fix crashes on detecting device with invalid descriptor Input: synaptics - handle spurious release of trackstick buttons, again Input: synaptics-rmi4 - remove check of Non-NULL array Input: byd - enable absolute mode Input: ims-pcu - sanity check against missing interfaces Input: melfas_mip4 - add hw_version sysfs attribute
-
Kirill A. Shutemov authored
!PageLRU should lead to SCAN_PAGE_LRU, not SCAN_SCAN_ABORT result. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrey Ryabinin authored
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nicolai Stange authored
If - generic_file_read_iter() gets called with a zero read length, - the read offset is at a page boundary, - IOCB_DIRECT is not set - and the page in question hasn't made it into the page cache yet, then do_generic_file_read() will trigger a readahead with a req_size hint of zero. Since roundup_pow_of_two(0) is undefined, UBSAN reports UBSAN: Undefined behaviour in include/linux/log2.h:63:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 3 PID: 1017 Comm: sa1 Tainted: G L 4.5.0-next-20160318+ #14 [...] Call Trace: [...] [<ffffffff813ef61a>] ondemand_readahead+0x3aa/0x3d0 [<ffffffff813ef61a>] ? ondemand_readahead+0x3aa/0x3d0 [<ffffffff813c73bd>] ? find_get_entry+0x2d/0x210 [<ffffffff813ef9c3>] page_cache_sync_readahead+0x63/0xa0 [<ffffffff813cc04d>] do_generic_file_read+0x80d/0xf90 [<ffffffff813cc955>] generic_file_read_iter+0x185/0x420 [...] [<ffffffff81510b06>] __vfs_read+0x256/0x3d0 [...] when get_init_ra_size() gets called from ondemand_readahead(). The net effect is that the initial readahead size is arch dependent for requested read lengths of zero: for example, since 1UL << (sizeof(unsigned long) * 8) evaluates to 1 on x86 while its result is 0 on ARMv7, the initial readahead size becomes 4 on the former and 0 on the latter. What's more, whether or not the file access timestamp is updated for zero length reads is decided differently for the two cases of IOCB_DIRECT being set or cleared: in the first case, generic_file_read_iter() explicitly skips updating that timestamp while in the latter case, it is always updated through the call to do_generic_file_read(). According to POSIX, zero length reads "do not modify the last data access timestamp" and thus, the IOCB_DIRECT behaviour is POSIXly correct. Let generic_file_read_iter() unconditionally check the requested read length at its entry and return immediately with success if it is zero. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexander Potapenko authored
Signed-off-by: Alexander Potapenko <glider@google.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-