- 27 May, 2014 9 commits
-
-
Vivek Gautam authored
Using devm_ioremap_resource() API should actually be preferred over devm_ioremap(), since the former request the mem region first and then gives back the ioremap'ed memory pointer. devm_ioremap_resource() calls request_mem_region(), therby preventing other drivers to make any overlapping call to the same region. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vivek Gautam authored
Using devm_ioremap_resource() API should actually be preferred over devm_ioremap(), since the former request the mem region first and then gives back the ioremap'ed memory pointer. devm_ioremap_resource() calls request_mem_region(), therby preventing other drivers to make any overlapping call to the same region. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vivek Gautam authored
Using devm_ioremap_resource() API should actually be preferred over devm_ioremap(), since the former request the mem region first and then gives back the ioremap'ed memory pointer. devm_ioremap_resource() calls request_mem_region(), therby preventing other drivers to make any overlapping call to the same region. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vivek Gautam authored
Using devm_ioremap_resource() API should actually be preferred over devm_ioremap(), since the former request the mem region first and then gives back the ioremap'ed memory pointer. devm_ioremap_resource() calls request_mem_region(), therby preventing other drivers to make any overlapping call to the same region. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kamil Debski authored
Add the phy provider, supplied by new Exynos-usb2phy using Generic phy framework. Keeping the support for older USB phy intact right now, in order to prevent any functionality break in absence of relevant device tree side change for ehci-exynos. Once we move to new phy in the device nodes for ehci, we can remove the support for older phys. Signed-off-by: Kamil Debski <k.debski@samsung.com> [gautam.vivek@samsung.com: Addressed review comments from mailing list] [gautam.vivek@samsung.com: Kept the code for old usb-phy, and just added support for new exynos5-usb2phy in generic phy framework] [gautam.vivek@samsung.com: Edited the commit message] Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Cc: Jingoo Han <jg1.han@samsung.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vivek Gautam authored
Add support to consume phy provided by Generic phy framework. Keeping the support for older usb-phy intact right now, in order to prevent any functionality break in absence of relevant device tree side change for ohci-exynos. Once we move to new phy in the device nodes for ohci, we can remove the support for older phys. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Cc: Jingoo Han <jg1.han@samsung.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vivek Gautam authored
Change to use struct device instead of struct platform_device for some static functions. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vivek Gautam authored
Change to use struct device instead of struct platform_device for some static functions. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jean Delvare authored
The Renesas R-Car USB PHY driver only supports the R8A7778 and R8A7779, it isn't useful on other systems unless build testing. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 23 May, 2014 11 commits
-
-
Dan Carpenter authored
My previous patch introduced a bug which prevented this driver from loading. devm_ioremap_resource() has a call to devm_request_mem_region() which will fail because the address space is shared between this PHY driver and CI device controller driver. Fixes: 10f0577a ('usb: phy: msm: change devm_ioremap() to devm_ioremap_resource()') Reported-by: "Ivan T. Ivanov" <iivanov@mm-sol.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Chen authored
Update device states according to ch9 in USB 2.0 specification Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Chen authored
When tried to enable OTG FSM, we need to rebuild both kernel Image and modules, since there are some codes at gadget modules which are controlled by related configurations. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ivan T. Ivanov authored
Since commit 62bb84ed (usb: gadget: ci13xxx: convert to platform device) start address of the capability registers is not passed correctly to udc_probe(). Fix this. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ivan T. Ivanov authored
Allows controller to be specified via device tree. Pass PHY phandle specified in DT to core driver. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ivan T. Ivanov authored
Document device tree binding information as required by the Qualcomm USB controller. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Fabio Estevam authored
The field PLLDIVVALUE of register PHY_CTRL_1 selects the reference clock source for the PHY: 00 = sysclock uses 19.2 MHz 01 = sysclock uses 24 MHz 10 = sysclock uses 26 MHz 11 = sysclock uses 27 MHz The reset value for this field is 10 according to the reference manual, and even though this reset value works for mx53, it does not work for mx51. So instead of relying on the reset value for the PLLDIVVALUE field, explicitly set it to 01 so that a 24MHz clock can be selected for the PHY and allowing both mx51 and mx53 to have USB OTG port functional. Succesfully tested 'g_ether' on a imx51-babbage and on a imx53-qsb boards. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Chen authored
The otg queue work include operations: one is disable interrupt, another one is call kernel queue work API. Many codes do this operation, using one inline function to instead of them. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Chen authored
Delete useless code Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Chen authored
Update TODO list Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usbGreg Kroah-Hartman authored
Felipe writes: usb: patches for v3.16 merge window Not a lot here during this merge window. Mostly we just have the usual miscellaneous patches (removal of unnecessary prints, proper dependencies being added to Kconfig, build warning fixes, new device ID, etc. Other than those, the only important new features are the new support for OS Strings which should help Linux Gadget Drivers behave better under MS Windows. Also Babble Recovery implementation for MUSB on AM335x. Lastly, we also have ARCH_QCOM PHY support though phy-msm. Signed-of-by: Felipe Balbi <balbi@ti.com> Conflicts: drivers/usb/phy/phy-mv-u3d-usb.c
-
- 20 May, 2014 11 commits
-
-
Mathias Nyman authored
Use one timer to control command timeout. start/kick the timer every time a command is completed and a new command is waiting, or a new command is added to a empty list. If the timer runs out, then tag the current command as "aborted", and start the xhci command abortion process. Previously each function that submitted a command had its own timer. If that command timed out, a new command structure for the command was created and it was put on a cancel_cmd_list list, then a pci write to abort the command ring was issued. when the ring was aborted, it checked if the current command was the one to be canceled, later when the ring was stopped the driver got ownership of the TRBs in the command ring, compared then to the TRBs in the cancel_cmd_list, and turned them into No-ops. Now, instead, at timeout we tag the status of the command in the command queue to be aborted, and start the ring abortion. Ring abortion stops the command ring and gives control of the commands to us. All the aborted commands are now turned into No-ops. If the ring is already stopped when the command times outs its not possible to start the ring abortion, in this case the command is turnd to No-op right away. All these changes allows us to remove the entire cancel_cmd_list code. The functions waiting for a command to finish no longer have their own timeouts. They will wait either until the command completes normally, or until the whole command abortion is done. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
Remove the per-device command list and handle_cmd_in_cmd_wait_list() and use the completion and status variables found in the command structure in the global command list. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
Create a list to store command structures, add a structure to it every time a command is submitted, and remove it from the list once we get a command completion event matching the command. Callers that wait for completion will free their command structures themselves. The other command structures are freed in the command completion event handler. Also add a check that prevents queuing commands if host is dying Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
To create a global command queue we require that each command put on the command ring is submitted with a command structure. Functions that queue commands and wait for completion need to allocate a command before submitting it, and free it once completed. The following command queuing functions need to be modified. xhci_configure_endpoint() xhci_address_device() xhci_queue_slot_control() xhci_queue_stop_endpoint() xhci_queue_new_dequeue_state() xhci_queue_reset_ep() xhci_configure_endpoint() xhci_configure_endpoint() could already be called with a command structure, and only xhci_check_maxpacket and xhci_check_bandwidth did not do so. These are changed and a command structure is now required. This change also simplifies the configure endpoint command completion handling and the "goto bandwidth_change" handling code can be removed. In some cases the command queuing function is called in interrupt context. These commands needs to be allocated atomically, and they can't wait for completion. These commands will in this patch be freed directly after queuing, but freeing will be moved to the command completion event handler in a later patch once we get the global command queue up.(Just so that we won't leak memory in the middle of the patch set) Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sarah Sharp authored
xHCI host controllers may only support a limited number of device slot IDs, which is usually far less than the theoretical maximum number of devices (255) that the USB specifications advertise. This is frustrating to consumers that expect to be able to plug in a large number of devices. Add a print statement when the Enable Slot command fails to show how many devices the host supports. We can't change hardware manufacturer's design decisions, but hopefully we can save customers a little bit of time trying to debug why their host mysteriously fails when too many devices are plugged in. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Amund Hov <Amund.Hov@silabs.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Gordeev authored
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Fabio Estevam authored
Using the IS_ENABLED() macro can make the code shorter and easier to read. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Williams authored
Save someone else the debug cycles of figuring out why a driver's transfer request is failing or causing undefined system behavior. Buffers submitted for dma must come from GFP allocated / DMA-able memory. Return -EAGAIN matching the return value for dma_mapping_error() cases. Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lin Wang authored
This patch fix wrong port number reported when trying to enable/disable USB2.0 hardware LPM. Signed-off-by: Lin Wang <lin.x.wang@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
Merge tag 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: for 3.16 merge window Bunch of fixes and a new driver for Exynos5 USB 3.0 PHY.
-
Greg Kroah-Hartman authored
We need these USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 16 May, 2014 2 commits
-
-
Matwey V. Kornilov authored
The value of the revision is stored in musb->tusb_revision, so don't re-read it every time. Exporting tusb_get_revision is not needed anymore, so the dependency loop between tusb6010 and tusb6010_omap is resolved. Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Matwey V. Kornilov authored
Add field to store tusb6010 revision value. Read the revision at the startup and store to the variable. Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
- 15 May, 2014 7 commits
-
-
Ricardo Ribalda Delgado authored
When DEBUG is enabled driver->driver.name is accessed, but driver can be NULL [ 174.411689] BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 [ 174.429043] RIP: 0010:[<ffffffffa0131ca3>] [<ffffffffa0131ca3>] net2280_stop+0xa3/0x100 [net2280] [ 174.457910] Call Trace: [ 174.459503] [<ffffffffa00dd92a>] usb_gadget_remove_driver+0x5a/0xb0 [udc_core] [ 174.462693] [<ffffffffa00ddd84>] usb_del_gadget_udc+0xb4/0x110 [udc_core] [ 174.464316] [<ffffffffa012e2bf>] net2280_remove+0x2f/0x1c0 [net2280] Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Laurent Pinchart authored
The vb2 queue timestamp_flags field must be set by drivers, as enforced by a WARN_ON in vb2_queue_init. The UVC gadget driver failed to do so. This resulted in the following warning. [ 2.104371] g_webcam gadget: uvc_function_bind [ 2.105567] ------------[ cut here ]------------ [ 2.105567] ------------[ cut here ]------------ [ 2.106779] WARNING: CPU: 0 PID: 1 at drivers/media/v4l2-core/videobuf2-core.c:2207 vb2_queue_init+0xa3/0x113() Fix it. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Laurent Pinchart authored
The UVC gadget driver doesn't support interlaced video but left the buffer field uninitialized. Set it to V4L2_FIELD_NONE. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Laurent Pinchart authored
The wall time clock isn't useful for applications as it can jump around due to time adjustement. Switch to the monotonic clock. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Liviu Dudau authored
adding new device id for SMSC USB334x devices. Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Andrzej Pietrasiewicz authored
In some circumstances when g_audio is being unloaded there happens an endless loop in udc driver. It has happend on a board with s3c-hsotg. If there are requests in endpoint's queue, they are completed in a loop. But completing them might cause appending new requests to the queue. This patch causes agdev_iso_complete() to return immediately if request's status is -ESHUTDOWN. If it does not return immediately, then although the current request is removed from the queue, a new one is appended to the queue, so the above mentioned loop cannot end. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Andy Shevchenko authored
This fixes a bug when dwc3_pci_register_phys() fails and leaves device enabled. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-