- 17 Jun, 2013 15 commits
-
-
Hans Verkuil authored
This is no longer needed since the core now handles this through DBG_G_CHIP_INFO. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
This is no longer needed since the core now handles this through DBG_G_CHIP_INFO. Signed-off-by:
-
Hans Verkuil authored
This is no longer needed since the core now handles this through DBG_G_CHIP_INFO. Signed-off-by:
-
Hans Verkuil authored
This is no longer needed since the core now handles this through DBG_G_CHIP_INFO. Signed-off-by:
-
Hans Verkuil authored
This is no longer needed since the core now handles this through DBG_G_CHIP_INFO. Signed-off-by:
-
Hans Verkuil authored
Replace the V4L2_IDENT_* usage with tveeprom-specific defines. This header is deprecated, so those defines shouldn't be used anymore. The em28xx driver is the only one that uses the tveeprom audio_processor field, so that has been updated to use the new tveeprom AUDPROC define. Signed-off-by:
-
Hans Verkuil authored
Remove g_chip_ident. This driver used some of the V4L2_IDENT defines, replace those with a driver-specific enum. This makes it possible to drop the v4l2-chip-ident.h define as well. Signed-off-by:
-
Hans Verkuil authored
Remove g_chip_ident and replace it with g_chip_info. Signed-off-by:
-
Hans Verkuil authored
Remove g_chip_ident and replace it with g_chip_info. Signed-off-by:
-
Hans Verkuil authored
This op and the v4l2-chip-ident.h header are no longer needed. Signed-off-by:
-
Hans Verkuil authored
Replace g_chip_ident by g_chip_info. Note that the IR support is implemented as a subdev, so this part no longer needs to be handled as a 'bridge' chip. Signed-off-by:
-
Hans Verkuil authored
g_chip_ident was used to determine if a saa7114 or saa7115 was used. Instead just check the subdev name. After that the g_chip_ident function can be removed. Signed-off-by:
-
Hans Verkuil authored
The saa7115 driver used to show a 'chip found' message during probe. This was accidentally dropped during recent commits. Add it back as it is quite useful. Signed-off-by:
-
Hans Verkuil authored
The av-core is really a subdev, so there is no need anymore to act as if it is a 'second' bridge chip. As a result of this the g_chip_ident implementation can be completely dropped. Signed-off-by:
-
Hans Verkuil authored
VIDIOC_DBG_G_CHIP_IDENT has been replaced by VIDIOC_DBG_G_CHIP_INFO. Remove g_chip_ident support from bridge drivers since it is no longer needed. This patch takes care of all the trivial cases. Signed-off-by:
Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by:
-
- 13 Jun, 2013 25 commits
-
-
Hans Verkuil authored
Drop support for V4L2_CHIP_MATCH_I2C_DRIVER/ADDR and V4L2_CHIP_MATCH_AC97 types. The following patches will remove support for those in the drivers as well. This means that bridge drivers no longer have to check for the match.type field in their g/s_register implementations. Only if they also implement g_chip_info do they still have to check the match.addr field, otherwise the core will check for that as well. Signed-off-by:
-
Lad, Prabhakar authored
generally the pdata needs to be a constant pointer in the device state structure. This patch makes the pdata as a constant pointer and alongside returns -EINVAL when pdata is NULL. Signed-off-by:
-
Lad, Prabhakar authored
the ths7303_setup() was doing the same thing as ths7303_setval() except that ths7303_setval() sets it to some particular mode. This patch removes ths7303_setup() function and calls ths7303_setval() in the probe setting the device to 480I_576I filter mode in the probe. Signed-off-by:
-
Lad, Prabhakar authored
This patch removes init_enable option from pdata, the init_enable was intended that the device should start streaming video immediately but ideally the bridge drivers should call s_stream explicitly for such devices to start video. Signed-off-by:
-
Lad, Prabhakar authored
Remove init_enable from ths7303 pdata as it is being dropped from ths7303_platform_data. The purpose of init_enable was that the device should start streaming video immediately but instead the bridge drivers should call s_stream explicitly for such devices. This is in fact what happens for the dm365, so setting init_enable here never made sense in the first place. Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Antti Palosaari authored
It was found by trial and error testing that at least 11 ms delay is needed before first I/O, otherwise device will skip given command. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Hans Verkuil authored
The device was never set to the initial frequency. Signed-off-by:
-
Hans Verkuil authored
The *std should be set to V4L2_STD_UNKNOWN, not the function's return code. Also, *std should be ANDed with 525_60 or 625_50. Signed-off-by:
-
Vladimir Barinov authored
Add OKI Semiconductor ML86V7667 video decoder driver. [Sergei: added v4l2_device_unregister_subdev() call to the error cleanup path of ml86v7667_probe(), renamed ml86v7667_try_mbus_fmt() to ml86v7667_mbus_fmt(), killed v4l2_chip_match_i2c_client() checks in the [gs]_register() methods, fixed the prototype of the s_register() method, did some cleanup.] Signed-off-by:
Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Vladimir Barinov authored
Add subdev video ops for ADV7180 video decoder. This makes decoder usable on the soc-camera drivers. [Sergei: renamed adv7180_try_mbus_fmt() to adv7180_mbus_fmt().] Signed-off-by:
-
Hans Verkuil authored
get_video_info() should never return EFAULT, instead it should return the low-level usb_control_msg() error. Add a valid field to the hdpvr_video_info struct so the driver can easily check if a valid format was detected. Whenever get_video_info is called and it returns an error (e.g. usb_control_msg failed), then return that error to userspace as well. Signed-off-by:
-
Hans Verkuil authored
Remove an unnecessary 'else' and invert a condition which makes the code more readable. Signed-off-by:
-
Hans Verkuil authored
If no format has been detected, then querystd should return V4L2_STD_UNKNOWN, not V4L2_STD_ALL. Signed-off-by:
-
Roberto Alcântara authored
Ensure release_firmware is called if kmalloc fails. [mchehab@redhat.com: patch unmangled and converted from -p2 to -p1] Signed-off-by:
Roberto Alcantara <roberto@eletronica.org> Signed-off-by:
-
Sylwester Nawrocki authored
This patch fixes following compilation warning: CC [M] drivers/media/platform/s5p-tv/hdmi_drv.o drivers/media/platform/s5p-tv/hdmi_drv.c: In function ‘hdmi_resource_poweron’: drivers/media/platform/s5p-tv/hdmi_drv.c:583:23: warning: ignoring return value of ‘regulator_bulk_enable’, declared with attribute warn_unused_result Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
This patch fixes following compilation warning: drivers/media/platform/s5p-tv/sdo_drv.c: In function ‘sdo_runtime_resume’: drivers/media/platform/s5p-tv/sdo_drv.c:268:18: warning: ignoring return value of ‘regulator_enable’, declared with attribute warn_unused_result drivers/media/platform/s5p-tv/sdo_drv.c:269:18: warning: ignoring return value of ‘regulator_enable’, declared with attribute warn_unused_result Signed-off-by:
-
Sylwester Nawrocki authored
This patch fixes following compilation warning: CC [M] drivers/media/platform/s5p-tv/sii9234_drv.o drivers/media/platform/s5p-tv/sii9234_drv.c: In function ‘sii9234_runtime_resume’: drivers/media/platform/s5p-tv/sii9234_drv.c:252:18: warning: ignoring return value of ‘regulator_enable’, declared with attribute warn_unused_result Signed-off-by:
-
Sylwester Nawrocki authored
This patch corrects the link_notify handler to support more complex pipelines, including fimc-lite and fimc-is entities. After the FIMC-IS driver addition the assumptions made in the link_notify callback are no longer valid, e.g. the link between fimc-lite subdev and its video node is not immutable any more and there is more subdevs than just sensor, MIPI-CSIS and FIMC(-LITE). The graph is now walked and for each video node found a media pipeline which ends at this node is disabled/enabled (the subdevs are powered on/off). Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Currently the media device link_notify callback is invoked before the actual change of state of a link when the link is being enabled, and after the actual change of state when the link is being disabled. This doesn't allow a media device driver to perform any operations on a full graph before a link is disabled, as well as performing any tasks on a modified graph right after a link's state is changed. This patch modifies signature of the link_notify callback. This callback is now called always before and after a link's state change. To distinguish the notifications a 'notification' argument is added to the link_notify callback: MEDIA_DEV_NOTIFY_PRE_LINK_CH indicates notification before link's state change and MEDIA_DEV_NOTIFY_POST_LINK_CH corresponds to a notification after link flags change. [mchehab@redhat.com: whitespace cleanups] Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Sylwester Nawrocki authored
Add a debug trace macro for the FIMC-IS ISP subdev and the ISP video node drivers which are going to be added in subsequent patches. Signed-off-by:
-
Sylwester Nawrocki authored
Move __fimc_videoc_querycap() function to the common exynos4-is-common.ko module so it don't need to be reimplemented in multiple video node drivers of the exynos4-is. Signed-off-by:
-
Sylwester Nawrocki authored
Remove duplicated code in the vidioc_try_fmt and vidioc_s_fmt handlers. This is a pre-requsite to allow successful fimc.capture video open even if its corresponding media entities are not linked into a complete pipeline. Signed-off-by:
-
Sylwester Nawrocki authored
Remove unused macros and fields of struct fimc_is_video. Signed-off-by:
-
Phil Carmody authored
Merge the two sets of flags into one array to simplify accessing arbitrary bits from them. Signed-off-by:
Phil Carmody <phil.carmody@partner.samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
FIMC-LITE devices are never looked up by iterating over all platform devices with bus_for_each_device() as these IP blocks are available only on dt-only Exynos SoC platforms. Signed-off-by:
-
