- 11 Sep, 2013 40 commits
-
-
Oleg Nesterov authored
task_struct->pid/tgid should go away. 1. Change same_thread_group() to use task->signal for comparison. 2. Change has_group_leader_pid(task) to compare task_pid(task) with signal->leader_pid. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Sergey Dyasly <dserrg@gmail.com> Reviewed-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jie Liu authored
Call fiemap ioctl(2) with given start offset as well as an desired mapping range should show extents if possible. However, we somehow figure out the end offset of mapping via 'mapping_end -= cpos' before iterating the extent records which would cause problems if the given fiemap length is too small to a cluster size, e.g, Cluster size 4096: debugfs.ocfs2 1.6.3 Block Size Bits: 12 Cluster Size Bits: 12 The extended fiemap test utility From David: https://gist.github.com/anonymous/6172331 # dd if=/dev/urandom of=/ocfs2/test_file bs=1M count=1000 # ./fiemap /ocfs2/test_file 4096 10 start: 4096, length: 10 File /ocfs2/test_file has 0 extents: # Logical Physical Length Flags ^^^^^ <-- No extent is shown In this case, at ocfs2_fiemap(): cpos == mapping_end == 1. Hence the loop of searching extent records was not executed at all. This patch remove the in question 'mapping_end -= cpos', and loops until the cpos is larger than the mapping_end as usual. # ./fiemap /ocfs2/test_file 4096 10 start: 4096, length: 10 File /ocfs2/test_file has 1 extents: # Logical Physical Length Flags 0: 0000000000000000 0000000056a01000 0000000006a00000 0000 Signed-off-by:Jie Liu <jeff.liu@oracle.com> Reported-by:
David Weber <wb@munzinger.de> Tested-by:
-
Joseph Qi authored
Variable ip in dlmfs_get_root_inode() is defined but not used. So clean it up. Signed-off-by:
Joseph Qi <joseph.qi@huawei.com> Reviewed-by:
-
Joyce authored
In o2hb_shutdown_slot() and o2hb_check_slot(), since event is defined as local, it is only valid during the call stack. So the following tiny race case may happen in a multi-volumes mounted environment: o2hb-vol1 o2hb-vol2 1) o2hb_shutdown_slot allocate local event1 2) queue_node_event add event1 to global o2hb_node_events 3) o2hb_shutdown_slot allocate local event2 4) queue_node_event add event2 to global o2hb_node_events 5) o2hb_run_event_list delete event1 from o2hb_node_events 6) o2hb_run_event_list event1 empty, return 7) o2hb_shutdown_slot event1 lifecycle ends 8) o2hb_fire_callbacks event1 is already *invalid* This patch lets it wait on o2hb_callback_sem when another thread is firing callbacks. And for performance consideration, we only call o2hb_run_event_list when there is an event queued. Signed-off-by:Joyce <xuejiufei@huawei.com> Signed-off-by:
-
Joseph Qi authored
Since o2nm_get_node_by_num() may return NULL, we add this check in o2net_accept_one() to avoid possible NULL pointer dereference. Signed-off-by:
-
Joseph Qi authored
Code in o2net_handler_tree_lookup() may be corrupted by mistake. So adjust it to promote readability. Signed-off-by:
-
Younger Liu authored
In ocfs2_remove_inode_range(), there is a memory leak. The variable path has allocated memory with ocfs2_new_path_from_et(), but it is not free. Signed-off-by:
Younger Liu <younger.liu@huawei.com> Reviewed-by:
-
Joseph Qi authored
In ocfs2_reflink_xattr_rec(), meta_ac and data_ac are allocated by calling ocfs2_lock_reflink_xattr_rec_allocators(). Once an error occurs when allocating *data_ac, it frees *meta_ac which is allocated before. Here it mistakenly sets meta_ac to NULL but *meta_ac. Then ocfs2_reflink_xattr_rec() will try to free meta_ac again which is already invalid. Signed-off-by:
-
Xue jiufei authored
dlm_do_local_recovery_cleanup() should force clean refmap if the owner of lockres is UNKNOWN. Otherwise node may hang when umounting filesystems. Here's the situation: Node1 Node2 dlmlock() -> dlm_get_lock_resource() send DLM_MASTER_REQUEST_MSG to other nodes. trying to master this lockres, return MAYBE. selected as the master of lockresA, set mle->master to Node1, and do assert_master, send DLM_ASSERT_MASTER_MSG to Node2. Node 2 has interest on lockresA and return DLM_ASSERT_RESPONSE_MASTERY_REF then something happened and Node2 crashed. Receiving DLM_ASSERT_RESPONSE_MASTERY_REF, set Node2 into refmap, and keep sending DLM_ASSERT_MASTER_MSG to other nodes o2hb found node2 down, calling dlm_hb_node_down() --> dlm_do_local_recovery_cleanup() the master of lockresA is still UNKNOWN, no need to call dlm_free_dead_locks(). Set the master of lockresA to Node1, but Node2 stills remains in refmap. When Node1 umount, it found that the refmap of lockresA is not empty and attempted to migrate it to Node2, But Node2 is already down, so umount hang, trying to migrate lockresA again and again. Signed-off-by: -
Younger Liu authored
In ocfs2_xattr_set(), if ocfs2_start_trans failed, meta_ac and data_ac should be free. Otherwise, It would lead to a memory leak. Signed-off-by:
-
Joseph Qi authored
In ocfs2_xattr_value_attach_refcount(), if error occurs when calling ocfs2_xattr_get_clusters(), it will go with unexpected behavior since local variables p_cluster, num_clusters and ext_flags are declared without initialization. Signed-off-by:
-
Jie Liu authored
The ocfs2 path is not properly freed which leads to a memory leak at __ocfs2_move_extents(). This patch stops the leaks of the ocfs2_path structure. Signed-off-by:
-
Joseph Qi authored
In ocfs2_attach_refcount_tree() and ocfs2_duplicate_extent_list(), if error occurs when calling ocfs2_get_clusters(), it will go with unexpected behavior as local variables p_cluster, num_clusters and ext_flags are declared without initialization. Signed-off-by:
-
Joseph Qi authored
In ocfs2_acl_from_xattr(), if size is less than sizeof(struct posix_acl_entry), it returns ERR_PTR(-EINVAL) directly. Then assign (size / sizeof(struct posix_acl_entry)) to count which will be at least 1, that means the following branch (count < 0) and (count == 0) will never be true. Signed-off-by:
Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Dong Fang authored
[dan.carpenter@oracle.com: fix up some NULL dereference bugs] Signed-off-by:
Dong Fang <yp.fangdong@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jeff Liu <jeff.liu@oracle.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Sunil Mushran authored
Fix some possible null pointer dereferences that were detected by the static code analyser, smatch. Signed-off-by:
Sunil Mushran <sunil.mushran@oracle.com> Reported-by:
Dan Carpenter <error27@gmail.com> Reported-by:
Guozhonghua <guozhonghua@h3c.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Younger Liu authored
There is an issue in reserving and claiming space for localalloc, When localalloc space is not enough, it would claim space from global_bitmap. And if there is not enough free space in global_bitmap, the size of claiming space would set to half of orignal size and retry. The issue is as follows: osb->local_alloc_bits is set to half of orignal size in ocfs2_recalc_la_window(), but ac->ac_bits_wanted is set to osb->local_alloc_default_bits which is not changed. localalloc always reserves and claims local_alloc_default_bits space and returns ENOSPC. So, ac->ac_bits_wanted should be osb->local_alloc_bits which would be changed. Signed-off-by:
-
Xue jiufei authored
dlm_request_all_locks() should deal with the status sent from target node if DLM_LOCK_REQUEST_MSG is sent successfully, or recovery master will fall into endless loop, waiting for other nodes to send locks and DLM_RECO_DATA_DONE_MSG to me. NodeA NodeB selected as recovery master dlm_remaster_locks() ->dlm_request_all_locks() send DLM_LOCK_REQUEST_MSG to nodeA It happened that NodeA cannot alloc memory when it processes this message. dlm_request_all_locks_handler() do not queue dlm_request_all_locks_worker and returns -ENOMEM. It will never send locks and DLM_RECO_DATA_DONE_MSG to NodeB. NodeB do not deal with the status sent from nodeA, and will fall in endless loop waiting for the recovery state of NodeA to be changed. Signed-off-by: -
Junxiao Bi authored
Though ocfs2 uses inode->i_mutex to protect i_size, there are both i_size_read/write() and direct accesses. Clean up all direct access to eliminate confusion. Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Younger Liu authored
The issue scenario is as following: When fallocating a very large disk space for a small file, __ocfs2_extend_allocation attempts to get a very large transaction. For some journal sizes, there may be not enough room for this transaction, and the fallocate will fail. The patch below extends & restarts the transaction as necessary while allocating space, and should work with even the smallest journal. This patch refers ext4 resize. Test: # mkfs.ocfs2 -b 4K -C 32K -T datafiles /dev/sdc ...(jounral size is 32M) # mount.ocfs2 /dev/sdc /mnt/ocfs2/ # touch /mnt/ocfs2/1.log # fallocate -o 0 -l 400G /mnt/ocfs2/1.log fallocate: /mnt/ocfs2/1.log: fallocate failed: Cannot allocate memory # tail -f /var/log/messages [ 7372.278591] JBD: fallocate wants too many credits (2051 > 2048) [ 7372.278597] (fallocate,6438,0):__ocfs2_extend_allocation:709 ERROR: status = -12 [ 7372.278603] (fallocate,6438,0):ocfs2_allocate_unwritten_extents:1504 ERROR: status = -12 [ 7372.278607] (fallocate,6438,0):__ocfs2_change_file_space:1955 ERROR: status = -12 ^C With this patch, the test works well. Signed-off-by:
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Cc: David Brown <davidb@codeaurora.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Suman Anna <s-anna@ti.com> Acked-by:
Libo Chen <libo.chen@huawei.com> Signed-off-by:
-
Paul Bolle authored
acornfb checks for HAS_VIDC while support for that macro was removed in v2.6.23 (when the arm26 port was removed). So we can remove a bit of dead code. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Oleg Nesterov authored
do_fork() denies CLONE_THREAD | CLONE_PARENT if NEWUSER | NEWPID. Then later copy_process() denies CLONE_SIGHAND if the new process will be in a different pid namespace (task_active_pid_ns() doesn't match current->nsproxy->pid_ns). This looks confusing and inconsistent. CLONE_NEWPID is very similar to the case when ->pid_ns was already unshared, we want the same restrictions so copy_process() should also nack CLONE_PARENT. And it would be better to deny CLONE_NEWUSER && CLONE_SIGHAND as well just for consistency. Kill the "CLONE_NEWUSER | CLONE_NEWPID" check in do_fork() and change copy_process() to do the same check along with ->pid_ns check we already have. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Colin Walters <walters@redhat.com> Signed-off-by:
-
Oleg Nesterov authored
Commit 8382fcac ("pidns: Outlaw thread creation after unshare(CLONE_NEWPID)") nacks CLONE_NEWPID if the forking process unshared pid_ns. This is correct but unnecessary, copy_pid_ns() does the same check. Remove the CLONE_NEWPID check to cleanup the code and prepare for the next change. Test-case: static int child(void *arg) { return 0; } static char stack[16 * 1024]; int main(void) { pid_t pid; assert(unshare(CLONE_NEWUSER | CLONE_NEWPID) == 0); pid = clone(child, stack + sizeof(stack) / 2, CLONE_NEWPID | SIGCHLD, NULL); assert(pid < 0 && errno == EINVAL); return 0; } clone(CLONE_NEWPID) correctly fails with or without this change. Signed-off-by:
-
Oleg Nesterov authored
Commit 8382fcac ("pidns: Outlaw thread creation after unshare(CLONE_NEWPID)") nacks CLONE_VM if the forking process unshared pid_ns, this obviously breaks vfork: int main(void) { assert(unshare(CLONE_NEWUSER | CLONE_NEWPID) == 0); assert(vfork() >= 0); _exit(0); return 0; } fails without this patch. Change this check to use CLONE_SIGHAND instead. This also forbids CLONE_THREAD automatically, and this is what the comment implies. We could probably even drop CLONE_SIGHAND and use CLONE_THREAD, but it would be safer to not do this. The current check denies CLONE_SIGHAND implicitely and there is no reason to change this. Eric said "CLONE_SIGHAND is fine. CLONE_THREAD would be even better. Having shared signal handling between two different pid namespaces is the case that we are fundamentally guarding against." Signed-off-by:
Colin Walters <walters@redhat.com> Acked-by:
-
Andrew Morton authored
Revert commit c846ef7d ("include/linux/smp.h:on_each_cpu(): switch back to a macro"). It turns out that the problematic linux/irqflags.h include was fixed within ia64 and mn10300. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Daney <david.daney@cavium.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull more s390 updates from Heiko Carstens: "This includes one bpf/jit bug fix where the jit compiler could sometimes write generated code out of bounds of the allocated memory area. The rest of the patches are only cleanups and minor improvements" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/irq: reduce size of external interrupt handler hash array s390/compat,uid16: use current_cred() s390/ap_bus: use and-mask instead of a cast s390/ftrace: avoid pointer arithmetics with function pointers s390: make various functions static, add declarations to header files s390/compat signal: add couple of __force annotations s390/mm: add __releases()/__acquires() annotations to gmap_alloc_table() s390: keep Kconfig sorted s390/irq: rework irq subclass handling s390/irq: use hlists for external interrupt handler array s390/dumpstack: convert print_symbol to %pSR s390/perf: Remove print_hex_dump_bytes() debug output s390: update defconfig s390/bpf,jit: fix address randomization
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds authored
Pull kconfig updates from Michal Marek: "This is the kconfig part of kbuild for v3.12-rc1: - post-3.11 search code fixes and micro-optimizations - CONFIG_MODULES is no longer a special case; this is needed to eventually fix the bug that using KCONFIG_ALLCONFIG breaks allmodconfig - long long is used to store hex and int values - make silentoldconfig no longer warns when a symbol changes from tristate to bool (it's a job for make oldconfig) - scripts/diffconfig updated to work with newer Pythons - scripts/config does not rely on GNU sed extensions" * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: do not allow more than one symbol to have 'option modules' kconfig: regenerate bison parser kconfig: do not special-case 'MODULES' symbol diffconfig: Update script to support python versions 2.5 through 3.3 diffconfig: Gracefully exit if the default config files are not present modules: do not depend on kconfig to set 'modules' option to symbol MODULES kconfig: silence warning when parsing auto.conf when a symbol has changed type scripts/config: use sed's POSIX interface kconfig: switch to "long long" for sanity kconfig: simplify symbol-search code kconfig: don't allocate n+1 elements in temporary array kconfig: minor style fixes in symbol-search code kconfig/[mn]conf: shorten title in search-box kconfig: avoid multiple calls to strlen Documentation/kconfig: more concise and straightforward search explanation -
git://git.infradead.org/battery-2.6Linus Torvalds authored
Pull battery/power supply driver updates from Anton Vorontsov: "New drivers: - APM X-Gene system reboot driver by Feng Kan and Loc Ho (APM). - Qualcomm MSM reboot/poweroff driver by Abhimanyu Kapur (Codeaurora). - Texas Instruments BQ24190 charger driver by Mark A. Greer (Animal Creek Technologies). - Texas Instruments TWL4030 MADC battery driver by Lukas Märdian and Marek Belisko (Golden Delicious Computers). The driver is used on Freerunner GTA04 phones. Highlighted fixes and improvements: - Suspend/wakeup logic improvements: power supply objects will block system suspend until all power supply events are processed. Thanks to Zoran Markovic (Linaro), Arve Hjonnevag and Todd Poynor (Google)" * tag 'for-v3.12' of git://git.infradead.org/battery-2.6: rx51_battery: Fix channel number when reading adc value power: Add twl4030_madc battery driver. bq24190_charger: Workaround SS definition problem on i386 builds power_supply: Prevent suspend until power supply events are processed vexpress-poweroff: Should depend on the required infrastructure twl4030-charger: Fix compiler warning with regulator_enable() rx51_battery: Replace hardcoded channels values. bq24190_charger: Add support for TI BQ24190 Battery Charger ab8500-charger: We print an unintended error message max8925_power: Fix missing of_node_put power_supply: Replace strict_strtol() with kstrtol() power: Add APM X-Gene system reboot driver power_supply: tosa_battery: Get rid of irq_to_gpio usage power supply: collie_battery: Convert to use dev_pm_ops power_supply: Make goldfish_battery depend on GOLDFISH || COMPILE_TEST power: reset: Add msm restart support MAINTAINERS: drivers/power: add entry for SmartReflex AVS drivers -
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc fixes from Ben Herrenschmidt: "Here are a handful of small powerpc fixes. A couple of section mismatches (always worth fixing), a missing export of a new symbol causing build failures of modules, a page fault deadlock fix (interestingly that bug has been around for a LONG time, though it seems to be more easily triggered by KVM) and fixing pseries default idle loop in the absence of the cpuidle drivers (such as during boot)" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Default arch idle could cede processor on pseries fbdev/ps3fb: Fix section mismatch warning for ps3fb_probe powerpc: Fix section mismatch warning for prom_rtas_call powerpc: Fix possible deadlock on page fault powerpc: Export cpu_to_chip_id() to fix build error
-
Linus Torvalds authored
Merge tag 'stable/for-linus-3.12-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen bug-fixes from Konrad Rzeszutek Wilk: "This pull I usually do after rc1 is out but because we have a nice amount of fixes, some bootup related fixes for ARM, and it is early in the cycle we figured to do it now to help with tracking of potential regressions. The simple ones are the ARM ones - one of the patches fell through the cracks, other fixes a bootup issue (unconditionally using Xen functions). Then a fix for a regression causing preempt count being off (patch causing this went in v3.12). Lastly are the fixes to make Xen PVHVM guests use PV ticketlocks (Xen PV already does). The enablement of that was supposed to be part of the x86 spinlock merge in commit 816434ec ("The biggest change here are paravirtualized ticket spinlocks (PV spinlocks), which bring a nice speedup on various benchmarks...") but unfortunatly it would cause hang when booting Xen PVHVM guests. Yours truly got all of the bugs fixed last week and they (six of them) are included in this pull. Bug-fixes: - Boot on ARM without using Xen unconditionally - On Xen ARM don't run cpuidle/cpufreq - Fix regression in balloon driver, preempt count warnings - Fixes to make PVHVM able to use pv ticketlock. - Revert Xen PVHVM disabling pv ticketlock (aka, re-enable pv ticketlocks)" * tag 'stable/for-linus-3.12-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/spinlock: Don't use __initdate for xen_pv_spin Revert "xen/spinlock: Disable IRQ spinlock (PV) allocation on PVHVM" xen/spinlock: Don't setup xen spinlock IPI kicker if disabled. xen/smp: Update pv_lock_ops functions before alternative code starts under PVHVM xen/spinlock: We don't need the old structure anymore xen/spinlock: Fix locking path engaging too soon under PVHVM. xen/arm: disable cpuidle and cpufreq when linux is running as dom0 xen/p2m: Don't call get_balloon_scratch_page() twice, keep interrupts disabled for multicalls ARM: xen: only set pm function ptrs for Xen guests
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Daniel had some fixes queued up, that were delayed, the stolen memory ones and vga arbiter ones are quite useful, along with his usual bunch of stuff, nothing for HSW outputs yet. The one nouveau fix is for a regression I caused with the poweroff stuff" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (30 commits) drm/nouveau: fix oops on runtime suspend/resume drm/i915: Delay disabling of VGA memory until vgacon->fbcon handoff is done drm/i915: try not to lose backlight CBLV precision drm/i915: Confine page flips to BCS on Valleyview drm/i915: Skip stolen region initialisation if none is reserved drm/i915: fix gpu hang vs. flip stall deadlocks drm/i915: Hold an object reference whilst we shrink it drm/i915: fix i9xx_crtc_clock_get for multiplied pixels drm/i915: handle sdvo input pixel multiplier correctly again drm/i915: fix hpd work vs. flush_work in the pageflip code deadlock drm/i915: fix up the relocate_entry refactoring drm/i915: Fix pipe config warnings when dealing with LVDS fixed mode drm/i915: Don't call sg_free_table() if sg_alloc_table() fails i915: Update VGA arbiter support for newer devices vgaarb: Fix VGA decodes changes vgaarb: Don't disable resources that are not owned drm/i915: Pin pages whilst mapping the dma-buf drm/i915: enable trickle feed on Haswell x86: add early quirk for reserving Intel graphics stolen memory v5 drm/i915: split PCI IDs out into i915_drm.h v4 ...
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd updates from Bruce Fields: "This was a very quiet cycle! Just a few bugfixes and some cleanup" * 'nfsd-next' of git://linux-nfs.org/~bfields/linux: rpc: let xdr layer allocate gssproxy receieve pages rpc: fix huge kmalloc's in gss-proxy rpc: comment on linux_cred encoding, treat all as unsigned rpc: clean up decoding of gssproxy linux creds svcrpc: remove unused rq_resused nfsd4: nfsd4_create_clid_dir prints uninitialized data nfsd4: fix leak of inode reference on delegation failure Revert "nfsd: nfs4_file_get_access: need to be more careful with O_RDWR" sunrpc: prepare NFS for 2038 nfsd4: fix setlease error return nfsd: nfs4_file_get_access: need to be more careful with O_RDWR
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon cleanups from Guenter Roeck: "Minor cleanup in ina2xx and hwmon-vid drivers; no functional changes" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ina2xx) Remove casting the return value which is a void pointer hwmon: (hwmon-vid) Add __maybe_unused attribute to dummy variable
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 jumplabel changes from Peter Anvin: "One more x86 tree for this merge window. This tree improves the handling of jump labels, so that most of the time we don't have to do a massive initial patching run. Furthermore, we will error out of the jump label is not what is expected, eg if it has been corrupted or tampered with" * 'x86/jumplabel' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/jump-label: Show where and what was wrong on errors x86/jump-label: Add safety checks to jump label conversions x86/jump-label: Do not bother updating nops if they are correct x86/jump-label: Use best default nops for inital jump label calls
-
Vaidyanathan Srinivasan authored
When adding cpuidle support to pSeries, we introduced two regressions: - The new cpuidle backend driver only works under hypervisors supporting the "SLPLAR" option, which isn't the case of the old POWER4 hypervisor and the HV "light" used on js2x blades - The cpuidle driver registers fairly late, meaning that for a significant portion of the boot process, we end up having all threads spinning. This slows down the boot process and increases the overall resource usage if the hypervisor has shared processors. This fixes both by implementing a "default" idle that will cede to the hypervisor when possible, in a very simple way without all the bells and whisles of cpuidle. Reported-by:Paul Mackerras <paulus@samba.org> Signed-off-by:
Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Acked-by:
Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@vger.kernel.org>
-
Vladimir Murzin authored
While cross-building for PPC64 I've got WARNING: drivers/video/built-in.o(.text+0x9f9ca): Section mismatch in reference from the function .ps3fb_probe() to th e variable .init.data:ps3fb_fix The function .ps3fb_probe() references the variable __initdata ps3fb_fix. This is often because .ps3fb_probe lacks a __initdata annotation or the annotation of ps3fb_fix is wrong. WARNING: drivers/video/built-in.o(.text+0x9f9d2): Section mismatch in reference from the function .ps3fb_probe() to the variable .init.data:ps3fb_fix The function .ps3fb_probe() references the variable __initdata ps3fb_fix. This is often because .ps3fb_probe lacks a __initdata annotation or the annotation of ps3fb_fix is wrong. WARNING: drivers/built-in.o(.text+0xe222a): Section mismatch in reference from the function .ps3fb_probe() to the variable .init.data:ps3fb_fix The function .ps3fb_probe() references the variable __initdata ps3fb_fix. This is often because .ps3fb_probe lacks a __initdata annotation or the annotation of ps3fb_fix is wrong. WARNING: drivers/built-in.o(.text+0xe2232): Section mismatch in reference from the function .ps3fb_probe() to the variable .init.data:ps3fb_fix The function .ps3fb_probe() references the variable __initdata ps3fb_fix. This is often because .ps3fb_probe lacks a __initdata annotation or the annotation of ps3fb_fix is wrong. WARNING: vmlinux.o(.text+0x561d4a): Section mismatch in reference from the function .ps3fb_probe() to the variable .init.data:ps3fb_fix The function .ps3fb_probe() references the variable __initdata ps3fb_fix. This is often because .ps3fb_probe lacks a __initdata annotation or the annotation of ps3fb_fix is wrong. Mismatch was introduced with 48c68c4f "Drivers: video: remove __dev* attributes." Remove __init data annotation from ps3fb_fix. Signed-off-by:
Vladimir Murzin <murzin.v@gmail.com> Signed-off-by:
-
Vladimir Murzin authored
While cross-building for PPC64 I've got WARNING: vmlinux.o(.text.unlikely+0x1ba): Section mismatch in reference from the function .prom_rtas_call() to the variable .init.data:dt_string_start The function .prom_rtas_call() references the variable __initdata dt_string_start. This is often because .prom_rtas_call lacks a __initdata annotation or the annotation of dt_string_start is wrong. WARNING: vmlinux.o(.meminit.text+0xeb0): Section mismatch in reference from the function .free_area_init_core.isra.47() to the function .init.text:.set_pageblock_order() The function __meminit .free_area_init_core.isra.47() references a function __init .set_pageblock_order(). If .set_pageblock_order is only used by .free_area_init_core.isra.47 then annotate .set_pageblock_order with a matching annotation. Fix it by proper annotation of prom_rtas_call. Signed-off-by:
-
Aneesh Kumar K.V authored
stack_grow_into/14082 is trying to acquire lock: (&mm->mmap_sem){++++++}, at: [<c000000000206d28>] .might_fault+0x78/0xe0 but task is already holding lock: (&mm->mmap_sem){++++++}, at: [<c0000000007ffd8c>] .do_page_fault+0x24c/0x910 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&mm->mmap_sem); lock(&mm->mmap_sem); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by stack_grow_into/14082: #0: (&mm->mmap_sem){++++++}, at: [<c0000000007ffd8c>] .do_page_fault+0x24c/0x910 stack backtrace: CPU: 21 PID: 14082 Comm: stack_grow_into Not tainted 3.10.0-10.el7.ppc64.debug #1 Call Trace: [c0000003d396b850] [c000000000016e7c] .show_stack+0x7c/0x1f0 (unreliable) [c0000003d396b920] [c000000000813fc8] .dump_stack+0x28/0x3c [c0000003d396b990] [c000000000124b90] .__lock_acquire+0x1640/0x1800 [c0000003d396bab0] [c00000000012570c] .lock_acquire+0xac/0x250 [c0000003d396bb80] [c000000000206d54] .might_fault+0xa4/0xe0 [c0000003d396bbf0] [c0000000007ffe2c] .do_page_fault+0x2ec/0x910 [c0000003d396be30] [c0000000000092e8] handle_page_fault+0x10/0x30 Signed-off-by:Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Guenter Roeck authored
powerpc allmodconfig build fails with: ERROR: ".cpu_to_chip_id" [drivers/block/mtip32xx/mtip32xx.ko] undefined! The problem was introduced with commit 15863ff3 (powerpc: Make chip-id information available to userspace). Export the missing symbol. Cc: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Cc: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
